William Pitcock
4d21f1e8e0
extensions/helpops: new module, implementing a helpops system.
...
if loaded, this module takes over /stats p, and displays people who are umode +H.
to get umode +H, one must have the "usermode:helpops" permission.
2016-01-14 08:08:40 -06:00
William Pitcock
14482679ce
ircd: channel: implement an option to strip color codes from channel topics
2016-01-13 17:05:41 -06:00
William Pitcock
e118f2d431
extensions/chm_operpeace: new module which disallows kicking of operators on select channels
2016-01-13 16:52:56 -06:00
William Pitcock
88c48be58c
extensions/sno_globalnickchange: import from ircd-seven
2016-01-12 07:10:39 -06:00
William Pitcock
15feac531c
ircd: implement support for remote module load/unload/etc commands
2016-01-12 00:37:54 -06:00
William Pitcock
cc7ae51cdc
Allow remote DIE and RESTART (from ircd-seven)
2016-01-12 00:04:54 -06:00
William Pitcock
a4721f5e9f
ircd: implement EXTENDCHANS, based on ircd-seven (with some improvements from chatircd)
2016-01-11 23:32:23 -06:00
William Pitcock
fe749d3709
ircd: implement GRANT subsystem based on ircd-seven
2016-01-11 23:02:03 -06:00
William Pitcock
9e45a5ca19
buildsystem: further cleanup
2016-01-08 07:01:00 -06:00
William Pitcock
f0718c93d5
configure: use correct path for libltdl
2016-01-08 06:50:01 -06:00
William Pitcock
5164a68650
buildsystem: update Makefile.in's
2016-01-08 05:20:32 -06:00
Aaron Jones
d8c4154da2
Fix LTDL conditional, remove some unnecessary and/or ugly configure tests
2016-01-07 17:15:55 +00:00
William Pitcock
d76258f559
modules: revert lt_dlopenext() change
2016-01-06 01:57:24 -06:00
William Pitcock
79b525052b
doc: fix make install
2016-01-06 01:34:41 -06:00
William Pitcock
30da589e9e
modules: use lt_dlopenext() to make the config look nicer
2016-01-06 01:33:33 -06:00
William Pitcock
2a19fc3f57
general: remove last vestiges of static modules support (this hasn't ever actually worked...)
2016-01-06 01:28:20 -06:00
William Pitcock
0fa09b8024
documentation updates for libltdl
2016-01-05 21:41:03 -06:00
William Pitcock
c52df12552
buildsystem: convert to automake + libtool
2016-01-05 21:20:25 -06:00
William Pitcock
d513218a9e
LIST: allow channel display threshold to be configured ( closes #109 )
2015-12-26 22:23:28 -06:00
William Pitcock
c1725bda3c
ssl: allow cipher list to be overridden ( closes #67 )
2015-12-12 07:50:48 -06:00
William Pitcock
63eb8567cb
implement configurable channel modes ( closes #31 )
...
While functionally compatible with the implementation in ElementalIRCd, our approach is different,
specifically pre-calculating the bitmask at config load time. This is more efficient, and allows us
to report errors as part of the configuration phase.
2015-12-11 15:36:53 -06:00
William Pitcock
98c645cadb
document extb_combi and extb_hostmask bans ( closes #74 )
2015-12-10 02:27:08 -06:00
William Pitcock
7801d174d7
Revert "extban: implement helper functions for stackable extbans (part 1) (ref #74 )"
...
This reverts commit 304bd0d095
2015-12-10 02:19:21 -06:00
William Pitcock
304bd0d095
extban: implement helper functions for stackable extbans (part 1) (ref #74 )
2015-12-10 01:33:30 -06:00
William Pitcock
13d8f0edba
allow certfp method to be configured
2015-12-07 01:49:30 -06:00
Andrew Wilcox
5f8fb56d02
Revert "remove MONITOR for now pending a complete rewrite"
...
This reverts commit 87fa262fec
2015-10-15 17:31:55 -05:00
William Pitcock
87fa262fec
remove MONITOR for now pending a complete rewrite
2015-10-15 09:39:48 -05:00
Aaron Jones
c9b5cd623b
Remove network_desc configuration option, never actually used anywhere
2015-03-26 14:46:54 -05:00
William Pitcock
c021aafd66
ircd manpage: remove references to ircd.conf(5) ( closes #91 )
2015-03-22 16:42:11 -05:00
rnjohnson18
3514f17e98
Change example.conf to ircd.conf.example
2015-03-08 19:16:36 -05:00
William Pitcock
bb2a50509a
config: further EGD removal
2015-03-01 01:06:58 -06:00
William Pitcock
654caa84fb
ircd.conf.example: explain DH parameters size better ( closes #68 )
2015-02-18 12:36:00 -06:00
Max Teufel
7d33cce8ef
m_sasl: add configuration option for the nick of the SASL agent
...
This allows multiple improvements to m_sasl. With this change, the SASL
authentication gets aborted immediately when services are offline.
Additionally, we send the SASL ENCAP messages directly to the specified
SASL agent.
2015-02-14 20:31:25 +01:00
Mantas Mikulėnas
423d875b7f
doc/sasl.txt: forgot to wrap lines and sort references
2014-09-08 22:37:40 +03:00
Mantas Mikulėnas
f3319b3b2e
doc/sasl.txt: drop dead links, add links to IRCv3 spec and relevant SASL RFCs
2014-09-08 22:27:36 +03:00
Max Teufel
b3c4dfd7f2
example configs: change ssl_cert to etc/ssl.pem
...
The genssl script writes to etc/ssl.pem by default.
2014-07-13 18:12:54 +02:00
Jilles Tjoelker
f6b62c59bb
Chase change from example.conf to ircd.conf.example in various places.
2014-06-12 23:43:05 +02:00
Jilles Tjoelker
d0c2fc8266
server: Require EX and IE capabilities (+e and +I cmodes).
...
The code to send each channel mode only to servers supporting it was
broken a while ago and was not very useful anyway. Therefore, require
all connecting servers to support all standard channel modes.
2014-05-29 16:24:42 +02:00
Jilles Tjoelker
a0998bcdd7
example confs: Remove AHBL blacklists, which are no longer available.
2014-04-06 12:34:03 +02:00
Jilles Tjoelker
4229cef34c
doc/extban: Correct description of EXTBAN token in 005.
...
The change from EXTBAN=$:<types> to EXTBAN=$,<types> was made later on
and the documentation was not adjusted.
2014-03-01 18:16:40 +01:00
Jilles Tjoelker
a5de4edefd
doc/ts6-protocol: Document ETB message (EOPMOD capab).
2014-02-22 17:45:42 +01:00
Mantas Mikulėnas
9337f5ce45
doc/ts6-protocol: Correct the mode letter for termination
2014-01-12 21:17:52 +02:00
Jilles Tjoelker
cba8bbc3fc
Use RFC5737 and RFC3849 addresses in example confs.
...
There are IPv4 and IPv6 ranges reserved for documentation and example code;
use these to minimize the risk if someone accidentally uses an unmodified
example conf.
2013-10-06 19:39:30 +02:00
Jilles Tjoelker
364e59f82a
whowas: Use the normal rules for IP visibility.
...
Add the flags (auth{} spoof, dynamic spoof) to struct Whowas and add a
show_ip_whowas().
Normal users now see IPs of unspoofed users, and remote opers can see IPs
behind dynamic spoofs. Also, general::hide_spoof_ips is now applied when
the IP is shown, not when the client exits.
2013-09-14 12:26:32 +02:00
Jilles Tjoelker
7a9a9000b7
Enable remote WHOWAS queries.
...
On ircd-seven, this will allow remote opers to see certain hidden IPs.
2013-09-13 22:29:26 +02:00
Quora Dodrill
792ddf977e
doc: fix name of sample config again
2013-08-24 09:41:00 -05:00
Quora Dodrill
e3b534df81
doc: Example configuration renamed to ircd.conf.example
...
This is to follow the precident set by Atheme's atheme.conf.example file. Since the ircd now fails to start on a non-existant configuration file, seeing that message would make one know where to look.
2013-07-09 20:01:16 -07:00
Alex Iadicicco
ef861b0567
Mention channel name parameter to SJOIN in ts6-protocol.txt
2013-05-15 00:27:40 -07:00
Jilles Tjoelker
0ef5377a36
Rename m_nokillservices.so to no_kill_services.so per the naming scheme.
2013-04-27 17:00:10 +02:00
Elizabeth Myers
f0bce9d95d
Tweak docs.
...
Also, last commit fixes #16 . :p
2013-04-20 20:52:34 -05:00
Elizabeth Myers
3c93d380e0
Add support for multiple forms of blacklist queries using matches.
...
It supports both literal and last octet matches from the dnsbl.
If matches is not present, the old behaviour is used.
2013-04-20 20:49:11 -05:00
Elizabeth Myers
15d7a31134
Add m_nokillservices to documentation
2013-04-20 01:14:54 -05:00
Jilles Tjoelker
f09c28e18f
reference.conf: Correct description of general::client_exit.
...
It prefixes with "Quit: ", not "Client exit: ".
2013-01-01 18:07:37 +01:00
William Pitcock
f0c778d701
Merge pull request #2 from TheChrisAM/patch-1
...
Adding auth_user documentation for auth {} blocks.
2012-07-30 10:00:49 -07:00
Jilles Tjoelker
2b121c81f5
reference.conf: Extend documentation for max_number in server classes.
2012-07-28 15:31:44 +02:00
TheChrisAM
f9bb3e0d72
Adding auth_user documentation for auth {} blocks.
2012-05-31 21:26:52 -03:00
Jilles Tjoelker
1e23af243b
Fix null value for EUID account name in TS6 protocol document.
2012-04-30 18:32:04 +02:00
Jilles Tjoelker
8f5402d369
reference.conf: Remove need_ident from *@* auth block.
...
Few people want need_ident for everyone these days, so remove it from
reference.conf. It was not in example.conf.
2012-03-29 22:41:24 +02:00
Keith Buck
330692a1f2
Add option to immediately apply nick RESVs by FNC'ing.
2012-03-25 01:34:45 +00:00
William Pitcock
02270e9602
Add listen::defer_accept option for controlling usage of TCP_DEFER_ACCEPT option.
2012-03-17 10:00:39 -05:00
Jilles Tjoelker
755c144eb6
Specify more about IP addresses in TS6 protocol document.
2012-03-13 22:41:39 +01:00
Jilles Tjoelker
eda3590ea0
Fix RSFNC parameter order in TS6 protocol document.
2012-03-07 00:39:03 +01:00
Nathan Phillip Brink
634d4aad72
Fix inconsistency between --sysconfdir and --with-confdir, deprecate --with-confdir.
...
The inconsistency was created in
c74836dc4a
2012-03-02 01:11:42 +00:00
Nathan Phillip Brink
c74836dc4a
Add explicit support for being installed into a system triggered with --enable-fhs-paths.
...
Add two mechanism for avoiding name-collisions in a system-wide
installation of charybdis. The ssld and bandb daemons, intended to be
directly used by ircd and not the user, install into libexec when
--enable-fhs-paths is set. For binaries which are meant to be in PATH
(bindir), such as ircd and viconf, there is now an option
--with-program-prefix=progprefix inspired by automake. If the user
specifies --with-program-prefix=charybdis, the ircd binary is named
charybdisircd when installed.
Add support for saving the pidfile to a rundir and storing the ban
database in localstatedir instead of in sysconfdir. This is, again,
conditional on --enable-fhs-paths.
Fix(?) genssl.sh to always write created SSL key/certificate/dh
parameters to the sysconfdir specified during ./configure. The
previous behavior was to assume that the user ran genssl.sh after
ensuring that his current working directory was either sysconfdir or a
sibling directory of sysconfdir.
2012-03-01 02:41:09 +00:00
Jilles Tjoelker
d42e6915cf
Pace aways.
...
This becomes important because of away-notify sending aways to common
channels much like nick changes (which are also paced).
Marking as unaway is not limited (but obviously only does something if the
user was away before). To allow users to fix typos in away messages, two
aways are allowed in sequence if away has not been used recently.
2012-02-18 16:32:57 +01:00
Keith Buck
e88a1f1b15
Add ratelimit for high-bandwidth commands.
2012-02-18 03:54:44 +00:00
Keith Buck
c5bbc60375
Add away-notify client capability.
2012-02-14 14:15:44 +00:00
Jilles Tjoelker
adcec062ce
'monitor s' output does not end with RPL_ENDOFMONLIST.
2011-12-21 21:29:46 +01:00
Jilles Tjoelker
b225bf93b7
Change default --with-nicklen to 31, like atheme-services.
2011-11-29 23:32:10 +01:00
William Pitcock
b583faf970
Add support for customizing the usable nick length.
...
This adds a new ISUPPORT token, NICKLEN_USABLE which is strictly an informative value.
NICKLEN is always the maximum runtime NICKLEN supported by the IRCd, as other servers may
have their own usable NICKLEN settings. As NICKLEN_USABLE is strictly informative, and
NICKLEN is always the maximum possible NICKLEN, any clients which depend on NICKLEN for
memory preallocation will be unaffected by runtime changes to NICKLEN_USABLE.
The default NICKLEN is 50; the default serverinfo::nicklen in the config file is set to
30, which is the NICKLEN presently used on StaticBox.
2011-11-29 16:10:21 -06:00
Jilles Tjoelker
92236e376a
Remove an obsolete TS5 reference.
2011-11-01 22:07:32 +01:00
Jilles Tjoelker
2da6f6ebd7
Put back use_forward.
2011-09-25 16:22:29 +02:00
Elizabeth Jennifer Myers
765d839d3c
Port ircd-seven banfowards to charybdis.
...
nenolod gave the thumbs-up to port ircd-seven banfowards to charybdis to spb
for a while, and people have asked about it. Might as well do it since it's a
slow weekend.
Note that as a side effect use_forward is removed from the config and
unconditionally enabled!
2011-08-12 20:33:10 -04:00
Keith Buck
da1b891f9f
Pedantry: Make indentation consistent in example and reference confs.
2011-05-13 23:42:27 -07:00
Kiyoshi Aman
f8c9d8d9be
doc/extended-join.txt: Document CAP extended-join.
2011-04-19 04:52:56 -04:00
Stephen Bennett
e6e54763d9
Make flood control settings configurable by those who know exactly what they're doing.
...
From ircd-seven git changeset 29aa4203150337925a4f5c6e7da47be5394c2125 .
2011-03-27 16:35:26 -04:00
Elizabeth Jennifer Myers
0a1e77c27c
Support IPv6 blacklists. Also add a conf file option allowing the use of IPv4, IPv6, or both for a blacklist.
...
Although few blacklists currently support IPv6 lookups, they will likely begin to do so in the near future as more net trash begins using IPv6.
2011-02-27 16:38:05 -05:00
Stephen Bennett
341f971efa
Bring across disable_local_channels config option from ircd-seven
2010-12-21 20:38:04 +00:00
William Pitcock
f56b4e3c07
account-notify spec: with the extended-join capability, doing a WHO on new users is not necessary.
2010-12-16 00:35:12 -06:00
William Pitcock
a8df2896bb
Update specification.
2010-12-15 23:59:47 -06:00
William Pitcock
4f943f99e6
Add specification for the account-notify protocol extension.
2010-12-15 23:38:35 -06:00
William Pitcock
ff0cc1e616
Add support for linking using SSL certificate fingerprints as the link credential rather than the traditional server-password pair.
2010-12-13 23:14:00 -06:00
William Pitcock
429cf1b74f
Add oper-override (modehacking only) as a module.
...
I think if you are going to kick someone from a channel.
2010-12-06 23:44:55 -06:00
Jilles Tjoelker
45a27bf8b9
Change max_bans in reference.conf from 25 to 100, like example.conf.
2010-12-05 16:51:48 +01:00
JD Horelick
486436a299
Do not install ban .conf files (like kline.conf, rsv.conf, etc) as they aren't used anymore.
2010-12-04 17:29:01 -05:00
JD Horelick
f1e5a31775
Change the filenames of the generated SSL key/cert to ssl.* instead of test.* so that they're a bit more descriptive.
2010-11-13 16:07:54 -05:00
William Pitcock
22ab2e2544
Add documentation for proposed JUPE TS6 command.
2010-10-28 13:24:22 -05:00
William Pitcock
f42c7be6a5
Example configuration: Set the default TLS port to 6697.
2010-09-17 10:48:56 -05:00
Jilles Tjoelker
717238d2a2
Add target change for channels.
...
This has a separate enabling option channel::channel_target_change.
It applies to PRIVMSG, NOTICE and TOPIC by unvoiced unopped non-opers.
The same slots are used for channels and users.
2010-08-29 01:26:00 +02:00
William Pitcock
3c30c7a2de
Automated merge with ssh://hg.atheme.org//hg/charybdis
2010-05-14 08:49:31 -05:00
William Pitcock
40e92fca0e
Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues.
...
(StaticBox policy change as of May 14, 2010.)
2010-05-14 08:49:26 -05:00
Stephen Bennett
73d83e6db0
Update MLOCK protocol documentation to match changes in code
2010-05-02 22:18:13 +01:00
Jilles Tjoelker
a0ce140ed6
Improve technical documentation of BAN protocol.
2010-04-29 00:26:49 +02:00
JD Horelick
944b0584ea
Change config option for ident_timeout to default_ident_timeout as jilles
...
recommended.
2010-04-05 16:29:11 -04:00
JD Horelick
0ffb810660
Add a configuration option for ident_timeout.
2010-04-05 15:28:44 -04:00
Jilles Tjoelker
dca9e55257
Add propagated resvs, like klines and xlines.
2010-03-27 16:13:57 +01:00
Jilles Tjoelker
3cbbfb2556
Add propagated xlines, like klines.
2010-03-16 23:05:50 +01:00
Jilles Tjoelker
1702b69419
Add option general::use_propagated_bans to allow disabling new KLINE.
...
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
2010-03-14 17:21:20 +01:00
William Pitcock
d09bb8aeb0
Add syntax description of MLOCK message to ts6-protocol.txt.
2010-03-07 21:51:41 -06:00
Jilles Tjoelker
13d4255541
Document BAN message.
2010-03-07 14:06:28 +01:00
