/* doc/ircd.conf.example - brief example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team * Copyright (C) 2005-2006 charybdis development team * * See reference.conf for more information. */ /* Extensions */ #loadmodule "extensions/chm_operonly_compat"; #loadmodule "extensions/chm_quietunreg_compat"; #loadmodule "extensions/chm_sslonly_compat"; #loadmodule "extensions/chm_operpeace"; #loadmodule "extensions/createauthonly"; #loadmodule "extensions/extb_account"; #loadmodule "extensions/extb_canjoin"; #loadmodule "extensions/extb_channel"; #loadmodule "extensions/extb_combi"; #loadmodule "extensions/extb_extgecos"; #loadmodule "extensions/extb_hostmask"; #loadmodule "extensions/extb_oper"; #loadmodule "extensions/extb_realname"; #loadmodule "extensions/extb_server"; #loadmodule "extensions/extb_ssl"; #loadmodule "extensions/extb_usermode"; #loadmodule "extensions/hurt"; #loadmodule "extensions/m_extendchans"; #loadmodule "extensions/m_findforwards"; #loadmodule "extensions/m_identify"; #loadmodule "extensions/m_locops"; #loadmodule "extensions/no_oper_invis"; #loadmodule "extensions/sno_farconnect"; #loadmodule "extensions/sno_globalkline"; #loadmodule "extensions/sno_globalnickchange"; #loadmodule "extensions/sno_globaloper"; #loadmodule "extensions/sno_whois"; #loadmodule "extensions/override"; #loadmodule "extensions/no_kill_services"; /* * IP cloaking extensions: use ip_cloaking_4.0 * if you're linking 3.2 and later, otherwise use * ip_cloaking, for compatibility with older 3.x * releases. */ #loadmodule "extensions/ip_cloaking_4.0"; #loadmodule "extensions/ip_cloaking"; serverinfo { name = "hades.arpa"; sid = "42X"; description = "charybdis test server"; network_name = "StaticBox"; /* On multi-homed hosts you may need the following. These define * the addresses we connect from to other servers. */ /* for IPv4 */ #vhost = "192.0.2.6"; /* for IPv6 */ #vhost6 = "2001:db8:2::6"; /* ssl_private_key: our ssl private key */ ssl_private_key = "etc/ssl.key"; /* ssl_cert: certificate for our ssl server */ ssl_cert = "etc/ssl.pem"; /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 * In general, the DH parameters size should be the same as your key's size. * However it has been reported that some clients have broken TLS implementations which may * choke on keysizes larger than 2048-bit, so we would recommend using 2048-bit DH parameters * for now if your keys are larger than 2048-bit. */ ssl_dh_params = "etc/dh.pem"; /* ssld_count: number of ssld processes you want to start, if you * have a really busy server, using N-1 where N is the number of * cpu/cpu cores you have might be useful. A number greater than one * can also be useful in case of bugs in ssld and because ssld needs * two file descriptors per SSL connection. */ ssld_count = 1; /* default max clients: the default maximum number of clients * allowed to connect. This can be changed once ircd has started by * issuing: * /quote set maxclients */ default_max_clients = 1024; /* nicklen: enforced nickname length (for this server only; must not * be longer than the maximum length set while building). */ nicklen = 30; }; admin { name = "Lazy admin (lazya)"; description = "StaticBox client server"; email = "nobody@127.0.0.1"; }; log { fname_userlog = "logs/userlog"; #fname_fuserlog = "logs/fuserlog"; fname_operlog = "logs/operlog"; #fname_foperlog = "logs/foperlog"; fname_serverlog = "logs/serverlog"; #fname_klinelog = "logs/klinelog"; fname_killlog = "logs/killlog"; fname_operspylog = "logs/operspylog"; #fname_ioerrorlog = "logs/ioerror"; }; /* class {} blocks MUST be specified before anything that uses them. That * means they must be defined before auth {} and before connect {}. */ class "users" { ping_time = 2 minutes; number_per_ident = 10; number_per_ip = 10; number_per_ip_global = 50; cidr_ipv4_bitlen = 24; cidr_ipv6_bitlen = 64; number_per_cidr = 200; max_number = 3000; sendq = 400 kbytes; }; class "opers" { ping_time = 5 minutes; number_per_ip = 10; max_number = 1000; sendq = 1 megabyte; }; class "server" { ping_time = 5 minutes; connectfreq = 5 minutes; max_number = 1; sendq = 4 megabytes; }; listen { /* defer_accept: wait for clients to send IRC handshake data before * accepting them. if you intend to use software which depends on the * server replying first, such as BOPM, you should disable this feature. * otherwise, you probably want to leave it on. */ defer_accept = yes; /* If you want to listen on a specific IP only, specify host. * host definitions apply only to the following port line. */ #host = "192.0.2.6"; port = 5000, 6665 .. 6669; sslport = 6697; /* Listen on IPv6 (if you used host= above). */ #host = "2001:db8:2::6"; #port = 5000, 6665 .. 6669; #sslport = 9999; }; /* auth {}: allow users to connect to the ircd (OLD I:) * auth {} blocks MUST be specified in order of precedence. The first one * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. */ auth { /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user * lines are permitted per auth block. This is matched against the * hostname and IP address (using :: shortening for IPv6 and * prepending a 0 if it starts with a colon) and can also use CIDR * masks. */ user = "*@198.51.100.0/24"; user = "*test@2001:db8:1:*"; /* password: an optional password that is required to use this block. * By default this is not encrypted, specify the flag "encrypted" in * flags = ...; below if it is. */ password = "letmein"; /* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) */ spoof = "I.still.hate.packets"; /* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits * kline_exempt (old ^ flag) | exempt this user from k/g/xlines, * | dnsbls, and proxies * proxy_exempt | exempt this user from proxies * dnsbl_exempt | exempt this user from dnsbls * spambot_exempt | exempt this user from spambot checks * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class */ flags = kline_exempt, exceed_limit; /* class: the class the user is placed in */ class = "opers"; }; auth { user = "*@*"; class = "users"; }; /* privset {} blocks MUST be specified before anything that uses them. That * means they must be defined before operator {}. */ privset "local_op" { privs = oper:local_kill, oper:operwall; }; privset "server_bot" { extends = "local_op"; privs = oper:kline, oper:remoteban, snomask:nick_changes; }; privset "global_op" { extends = "local_op"; privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline, oper:resv, oper:mass_notice, oper:remoteban; }; privset "admin" { extends = "global_op"; privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant; }; operator "god" { /* name: the name of the oper must go above */ /* user: the user@host required for this operator. CIDR *is* * supported now. auth{} spoofs work here, other spoofs do not. * multiple user="" lines are supported. */ user = "*god@127.0.0.1"; /* password: the password required to oper. Unless ~encrypted is * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E"; /* rsa key: the public key for this oper when using Challenge. * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub"; /* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; */ #umodes = locops, servnotice, operwall, wallop; /* fingerprint: if specified, the oper's client certificate * fingerprint will be checked against the specified fingerprint * below. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b"; /* snomask: specific server notice mask on oper up. * If this is specified an oper will not be given oper_snomask. */ snomask = "+Zbfkrsuy"; /* flags: misc options for the operator. You may prefix an option * with ~ to disable it, e.g. ~encrypted. * * Default flags are encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] * need_ssl: must be using SSL/TLS to oper up */ flags = encrypted; /* privset: privileges set to grant */ privset = "admin"; }; connect "irc.uplink.com" { host = "203.0.113.3"; send_password = "password"; accept_password = "anotherpassword"; port = 6666; hub_mask = "*"; class = "server"; flags = compressed, topicburst; #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b"; /* If the connection is IPv6, uncomment below. * Use 0::1, not ::1, for IPv6 localhost. */ #aftype = ipv6; }; connect "ssl.uplink.com" { host = "203.0.113.129"; send_password = "password"; accept_password = "anotherpassword"; port = 9999; hub_mask = "*"; class = "server"; flags = ssl, topicburst; }; service { name = "services.int"; }; cluster { name = "*"; flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv; }; shared { oper = "*@*", "*"; flags = all, rehash; }; /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */ exempt { ip = "127.0.0.1"; }; channel { use_invex = yes; use_except = yes; use_forward = yes; use_knock = yes; knock_delay = 5 minutes; knock_delay_channel = 1 minute; max_chans_per_user = 15; max_chans_per_user_large = 60; max_bans = 100; max_bans_large = 500; default_split_user_count = 0; default_split_server_count = 0; no_create_on_split = no; no_join_on_split = no; burst_topicwho = yes; kick_on_split_riding = no; only_ascii_channels = no; resv_forcepart = yes; channel_target_change = yes; disable_local_channels = no; autochanmodes = "+nt"; displayed_usercount = 3; strip_topic_colors = no; }; serverhide { flatten_links = yes; links_delay = 5 minutes; hidden = no; disable_hidden = no; }; /* These are the blacklist settings. * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason. * * These settings should be adequate for most networks. * * Word to the wise: Do not use blacklists like SPEWS for blocking IRC * connections. * * As of charybdis 2.2, you can do some keyword substitution on the rejection * reason. The available keyword substitutions are: * * ${ip} - the user's IP * ${host} - the user's canonical hostname * ${dnsbl-host} - the dnsbl hostname the lookup was done against * ${nick} - the user's nickname * ${network-name} - the name of the network * * As of charybdis 3.4, a type parameter is supported, which specifies the * address families the blacklist supports. IPv4 and IPv6 are supported. * IPv4 is currently the default as few blacklists support IPv6 operation * as of this writing. * * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result * is considered a match. If included, a comma-separated list of *quoted* * strings is allowed to match queries. They may be of the format "0" to "255" * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match * an A record. The blacklist is only applied if it matches anything in the * list. You may freely mix full IP's and final octets. * * Consult your blacklist provider for the meaning of these parameters; they * are usually used to denote different ban types. */ blacklist { host = "rbl.efnetrbl.org"; type = ipv4; reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}"; /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */ # host = "foobl.blacklist.invalid"; # type = ipv4, ipv6; # matches = "4", "6", "127.0.0.10"; # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect"; }; /* These are the OPM settings. * This is similar to the functionality provided by BOPM. It will scan incoming * connections for open proxies by connecting to clients and attempting several * different open proxy handshakes. If they connect back to us (via a dedicated * listening port), and send back the data we send them, they are considered * an open proxy. For politeness reasons (users may be confused by the incoming * connection attempts if they are logging incoming connections), the user is * notified upon connect if they are being scanned. * * WARNING: * These settings are considered experimental. Only the most common proxy types * are checked for (Charybdis is immune from POST and GET proxies). If you are * not comfortable with experimental code, remove or comment out the *entire* * block below to disable the proxy scanner. */ opm { /* IPv4 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost. */ #listen_ipv4 = "127.0.0.1"; /* IPv4 port to listen on. * This should not be the same as any existing listeners. */ #port_ipv4 = 32000; /* IPv6 address to listen on. This must be a publicly facing IP address * to be effective. * If omitted, it defaults to serverinfo::vhost6. */ #listen_ipv6 = "0::1"; /* IPv6 port to listen on. * This should not be the same as any existing listeners. */ #port_ipv6 = 32000; /* You can also set the listen_port directive which will set both the * IPv4 and IPv6 ports at once. */ listen_port = 32000; /* This sets the timeout in seconds before ending open proxy scans. * Values less than 1 or greater than 60 are ignored. * It is advisable to keep it as short as feasible, so clients do not * get held up by excessively long scan times. */ timeout = 5; /* These are the ports to scan for SOCKS4 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ socks4_ports = 1080, 10800, 443, 80, 8080, 8000; /* These are the ports to scan for SOCKS5 proxies on. They may overlap * with other scan types. Sensible defaults are given below. */ socks5_ports = 1080, 10800, 443, 80, 8080, 8000; /* These are the ports to scan for HTTP connect proxies on (plaintext). * They may overlap with other scan types. Sensible defaults are given * below. */ httpconnect_ports = 80, 8080, 8000; /* These are the ports to scan for HTTPS CONNECT proxies on (SSL). * They may overlap with other scan types. Sensible defaults are given * below. */ httpsconnect_ports = 443, 4443; }; alias "NickServ" { target = "NickServ"; }; alias "ChanServ" { target = "ChanServ"; }; alias "OperServ" { target = "OperServ"; }; alias "MemoServ" { target = "MemoServ"; }; alias "NS" { target = "NickServ"; }; alias "CS" { target = "ChanServ"; }; alias "OS" { target = "OperServ"; }; alias "MS" { target = "MemoServ"; }; general { hide_error_messages = opers; hide_spoof_ips = yes; /* * default_umodes: umodes to enable on connect. * If you have enabled the new ip_cloaking_4.0 module, and you want * to make use of it, add +x to this option, i.e.: * default_umodes = "+ix"; * * If you have enabled the old ip_cloaking module, and you want * to make use of it, add +h to this option, i.e.: * default_umodes = "+ih"; */ default_umodes = "+i"; default_operstring = "is an IRC Operator"; default_adminstring = "is a Server Administrator"; servicestring = "is a Network Service"; /* * Nick of the network's SASL agent. Used to check whether services are here, * SASL credentials are only sent to its server. Needs to be a service. * * Defaults to SaslServ if unspecified. */ sasl_service = "SaslServ"; disable_fake_channels = no; tkline_expire_notices = no; default_floodcount = 10; failed_oper_notice = yes; dots_in_ident = 2; min_nonwildcard = 4; min_nonwildcard_simple = 3; max_accept = 100; max_monitor = 100; anti_nick_flood = yes; max_nick_time = 20 seconds; max_nick_changes = 5; anti_spam_exit_message_time = 5 minutes; ts_warn_delta = 30 seconds; ts_max_delta = 5 minutes; client_exit = yes; collision_fnc = yes; resv_fnc = yes; global_snotices = yes; dline_with_reason = yes; kline_delay = 0 seconds; kline_with_reason = yes; kline_reason = "K-Lined"; identify_service = "NickServ@services.int"; identify_command = "IDENTIFY"; non_redundant_klines = yes; warn_no_nline = yes; use_propagated_bans = yes; stats_e_disabled = no; stats_c_oper_only = no; stats_h_oper_only = no; stats_y_oper_only = no; stats_o_oper_only = yes; stats_P_oper_only = no; stats_i_oper_only = masked; stats_k_oper_only = masked; map_oper_only = no; operspy_admin_only = no; operspy_dont_care_user_info = no; caller_id_wait = 1 minute; pace_wait_simple = 1 second; pace_wait = 10 seconds; short_motd = no; ping_cookie = no; connect_timeout = 30 seconds; default_ident_timeout = 5; disable_auth = no; no_oper_flood = yes; max_targets = 4; client_flood_max_lines = 20; use_whois_actually = no; oper_only_umodes = operwall, locops, servnotice; oper_umodes = locops, servnotice, operwall, wallop; oper_snomask = "+s"; burst_away = yes; nick_delay = 0 seconds; # 15 minutes if you want to enable this reject_ban_time = 1 minute; reject_after_count = 3; reject_duration = 5 minutes; throttle_duration = 60; throttle_count = 4; max_ratelimit_tokens = 30; away_interval = 30; certfp_method = sha1; hide_opers_in_whois = no; }; modules { path = "modules"; path = "modules/autoload"; };