0
0
Fork 0
mirror of https://github.com/matrix-org/dendrite synced 2024-12-14 04:03:51 +01:00
dendrite/dendrite-config.yaml
Kegsay bf7e85848b
Rename serverkeyapi to signingkeyserver (#1492)
* Rename serverkeyapi to signingkeyserver

We use "api" for public facing stuff and "server" for internal stuff.
As the server key API is internal only, we call it 'signing key server',
which also clarifies the type of key (as opposed to TLS keys, E2E keys, etc)

* Convert docker/scripts to use signing-key-server

* Rename missed bits
2020-10-07 16:23:18 +01:00

333 lines
10 KiB
YAML

# This is the Dendrite configuration file.
#
# The configuration is split up into sections - each Dendrite component has a
# configuration section, in addition to the "global" section which applies to
# all components.
#
# At a minimum, to get started, you will need to update the settings in the
# "global" section for your deployment, and you will need to check that the
# database "connection_string" line in each component section is correct.
#
# Each component with a "database" section can accept the following formats
# for "connection_string":
# SQLite: file:filename.db
# file:///path/to/filename.db
# PostgreSQL: postgresql://user:pass@hostname/database?params=...
#
# SQLite is embedded into Dendrite and therefore no further prerequisites are
# needed for the database when using SQLite mode. However, performance with
# PostgreSQL is significantly better and recommended for multi-user deployments.
# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
# small number of users and likely will perform worse still with a higher volume
# of users.
#
# The "max_open_conns" and "max_idle_conns" settings configure the maximum
# number of open/idle database connections. The value 0 will use the database
# engine default, and a negative value will use unlimited connections. The
# "conn_max_lifetime" option controls the maximum length of time a database
# connection can be idle in seconds - a negative value is unlimited.
# The version of the configuration file.
version: 1
# Global Matrix configuration. This configuration applies to all components.
global:
# The domain name of this homeserver.
server_name: localhost
# The path to the signing private key file, used to sign requests and events.
private_key: matrix_key.pem
# The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)
# to old signing private keys that were formerly in use on this domain. These
# keys will not be used for federation request or event signing, but will be
# provided to any other homeserver that asks when trying to verify old events.
# old_private_keys:
# - private_key: old_matrix_key.pem
# expired_at: 1601024554498
# How long a remote server can cache our server signing key before requesting it
# again. Increasing this number will reduce the number of requests made by other
# servers for our key but increases the period that a compromised key will be
# considered valid by other homeservers.
key_validity_period: 168h0m0s
# Lists of domains that the server will trust as identity servers to verify third
# party identifiers such as phone numbers and email addresses.
trusted_third_party_id_servers:
- matrix.org
- vector.im
# Configuration for Kafka/Naffka.
kafka:
# List of Kafka broker addresses to connect to. This is not needed if using
# Naffka in monolith mode.
addresses:
- localhost:2181
# The prefix to use for Kafka topic names for this homeserver. Change this only if
# you are running more than one Dendrite homeserver on the same Kafka deployment.
topic_prefix: Dendrite
# Whether to use Naffka instead of Kafka. This is only available in monolith
# mode, but means that you can run a single-process server without requiring
# Kafka.
use_naffka: true
# Naffka database options. Not required when using Kafka.
naffka_database:
connection_string: file:naffka.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Configuration for Prometheus metric collection.
metrics:
# Whether or not Prometheus metrics are enabled.
enabled: false
# HTTP basic authentication to protect access to monitoring.
basic_auth:
username: metrics
password: metrics
# Configuration for the Appservice API.
app_service_api:
internal_api:
listen: http://localhost:7777
connect: http://localhost:7777
database:
connection_string: file:appservice.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Appservice configuration files to load into this homeserver.
config_files: []
# Configuration for the Client API.
client_api:
internal_api:
listen: http://localhost:7771
connect: http://localhost:7771
external_api:
listen: http://[::]:8071
# Prevents new users from being able to register on this homeserver, except when
# using the registration shared secret below.
registration_disabled: false
# If set, allows registration by anyone who knows the shared secret, regardless of
# whether registration is otherwise disabled.
registration_shared_secret: ""
# Whether to require reCAPTCHA for registration.
enable_registration_captcha: false
# Settings for ReCAPTCHA.
recaptcha_public_key: ""
recaptcha_private_key: ""
recaptcha_bypass_secret: ""
recaptcha_siteverify_api: ""
# TURN server information that this homeserver should send to clients.
turn:
turn_user_lifetime: ""
turn_uris: []
turn_shared_secret: ""
turn_username: ""
turn_password: ""
# Settings for rate-limited endpoints. Rate limiting will kick in after the
# threshold number of "slots" have been taken by requests from a specific
# host. Each "slot" will be released after the cooloff time in milliseconds.
rate_limiting:
enabled: true
threshold: 5
cooloff_ms: 500
# Configuration for the EDU server.
edu_server:
internal_api:
listen: http://localhost:7778
connect: http://localhost:7778
# Configuration for the Federation API.
federation_api:
internal_api:
listen: http://localhost:7772
connect: http://localhost:7772
external_api:
listen: http://[::]:8072
# List of paths to X.509 certificates to be used by the external federation listeners.
# These certificates will be used to calculate the TLS fingerprints and other servers
# will expect the certificate to match these fingerprints. Certificates must be in PEM
# format.
federation_certificates: []
# Configuration for the Federation Sender.
federation_sender:
internal_api:
listen: http://localhost:7775
connect: http://localhost:7775
database:
connection_string: file:federationsender.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# How many times we will try to resend a failed transaction to a specific server. The
# backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
send_max_retries: 16
# Disable the validation of TLS certificates of remote federated homeservers. Do not
# enable this option in production as it presents a security risk!
disable_tls_validation: false
# Use the following proxy server for outbound federation traffic.
proxy_outbound:
enabled: false
protocol: http
host: localhost
port: 8080
# Configuration for the Key Server (for end-to-end encryption).
key_server:
internal_api:
listen: http://localhost:7779
connect: http://localhost:7779
database:
connection_string: file:keyserver.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Configuration for the Media API.
media_api:
internal_api:
listen: http://localhost:7774
connect: http://localhost:7774
external_api:
listen: http://[::]:8074
database:
connection_string: file:mediaapi.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Storage path for uploaded media. May be relative or absolute.
base_path: ./media_store
# The maximum allowed file size (in bytes) for media uploads to this homeserver
# (0 = unlimited).
max_file_size_bytes: 10485760
# Whether to dynamically generate thumbnails if needed.
dynamic_thumbnails: false
# The maximum number of simultaneous thumbnail generators to run.
max_thumbnail_generators: 10
# A list of thumbnail sizes to be generated for media content.
thumbnail_sizes:
- width: 32
height: 32
method: crop
- width: 96
height: 96
method: crop
- width: 640
height: 480
method: scale
# Configuration for the Room Server.
room_server:
internal_api:
listen: http://localhost:7770
connect: http://localhost:7770
database:
connection_string: file:roomserver.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Configuration for the Signing Key Server (for server signing keys).
signing_key_server:
internal_api:
listen: http://localhost:7780
connect: http://localhost:7780
database:
connection_string: file:signingkeyserver.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Perspective keyservers to use as a backup when direct key fetches fail. This may
# be required to satisfy key requests for servers that are no longer online when
# joining some rooms.
key_perspectives:
- server_name: matrix.org
keys:
- key_id: ed25519:auto
public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
- key_id: ed25519:a_RXGa
public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ
# This option will control whether Dendrite will prefer to look up keys directly
# or whether it should try perspective servers first, using direct fetches as a
# last resort.
prefer_direct_fetch: false
# Configuration for the Sync API.
sync_api:
internal_api:
listen: http://localhost:7773
connect: http://localhost:7773
external_api:
listen: http://[::]:8073
database:
connection_string: file:syncapi.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Configuration for the User API.
user_api:
internal_api:
listen: http://localhost:7781
connect: http://localhost:7781
account_database:
connection_string: file:userapi_accounts.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
device_database:
connection_string: file:userapi_devices.db
max_open_conns: 100
max_idle_conns: 2
conn_max_lifetime: -1
# Configuration for Opentracing.
# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on
# how this works and how to set it up.
tracing:
enabled: false
jaeger:
serviceName: ""
disabled: false
rpc_metrics: false
tags: []
sampler: null
reporter: null
headers: null
baggage_restrictions: null
throttler: null
# Logging configuration, in addition to the standard logging that is sent to
# stdout by Dendrite.
logging:
- type: file
level: info
params:
path: /var/log/dendrite