This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
</details>
Partially resolves#25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Each change is tested manually line by line. There are too many changes
so I can't share dozens of screenshots.
In short:
1. `ui right` could be still used in `ui top attached header`, because
there is a special case.
2. A lot of `ui right` are just no-op, so they can be removed safely.
3. Some of the `ui right` should be replaced by `gt-float-right` (to
avoid breaking, leave them to the future).
4. A few of the `ui right` could be rewritten by flex.
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
---------
Co-authored-by: silverwind <me@silverwind.io>
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.
<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Set
[type=search](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/input/search)
- Disable spellcheck
- Set maxLength 255 that I found in `templates/repo/issue/search.tmpl`
- Remove unnecessary `max-width`, it does nothing
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Numerous small UI fixes:
- Fix double border in collaborator list
- Fix system notice table background
- Mute links in repo and org lists
- Downsize projects edit buttons
- Improve milestones and project list rendering
- Condense milestone list entry to a single line of "metas"
- Mute ".." button in repo files list
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
So I found this [linter](https://github.com/Riverside-Healthcare/djlint)
which features a mode for go templates, so I gave it a try and it did
find a number of valid issue, like unbalanced tags etc. It also has a
number of bugs, I had to disable/workaround many issues.
Given that this linter is written in python, this does add a dependency
on `python` >= 3.8 and `poetry` to the development environment to be
able to run this linter locally.
- `e.g.` prefixes on placeholders are removed because the linter had a
false-positive on `placeholder="e.g. cn=Search"` for the `attr=value`
syntax and it's not ideal anyways to write `e.g.` into a placeholder
because a placeholder is meant to hold a sample value.
- In `templates/repo/settings/options.tmpl` I simplified the logic to
not conditionally create opening tags without closing tags because this
stuff confuses the linter (and possibly the reader as well).
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
Before, Gitea shows the database table stats on the `admin dashboard`
page.
It has some problems:
* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.
So, this PR uses a separate page to show the stats and removes the
`actions` stat.
## ⚠️ BREAKING
The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
