In the default values below, a value in the form `$XYZ` refers to an environment variable. (However, see `environment-to-ini`.) Values in the form _`XxYyZz`_ refer to values listed as part of the default configuration. These notation forms will not work in your own `app.ini` file and are only listed here as documentation.
These values are environment-dependent but form the basis of a lot of values. They will be
reported as part of the default configuration when running `gitea --help` or on start-up. The order they are emitted there is slightly different but we will list them here in the order they are set-up.
- _`AppPath`_: This is the absolute path of the running gitea binary.
- _`AppWorkPath`_: This refers to "working path" of the `gitea` binary. It is determined by using the first set thing in the following hierarchy:
- The `--work-path` flag passed to the binary
- The environment variable `$GITEA_WORK_DIR`
- A built-in value set at build time (see building from source)
- Otherwise it defaults to the directory of the _`AppPath`_
- If any of the above are relative paths then they are made absolute against the
the directory of the _`AppPath`_
- _`CustomPath`_: This is the base directory for custom templates and other options.
It is determined by using the first set thing in the following hierarchy:
- The `--custom-path` flag passed to the binary
- The environment variable `$GITEA_CUSTOM`
- A built-in value set at build time (see building from source)
- Otherwise it defaults to _`AppWorkPath`_`/custom`
- If any of the above are relative paths then they are made absolute against the
the directory of the _`AppWorkPath`_
- _`CustomConf`_: This is the path to the `app.ini` file.
- The `--config` flag passed to the binary
- A built-in value set at build time (see building from source)
- Otherwise it defaults to _`CustomPath`_`/conf/app.ini`
- If any of the above are relative paths then they are made absolute against the
the directory of the _`CustomPath`_
In addition there is _`StaticRootPath`_ which can be set as a built-in at build time, but will otherwise default to _`AppWorkPath`_
-`DETECTED_CHARSETS_ORDER`: **UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, UTF-32LE, ISO-8859, windows-1252, ISO-8859, windows-1250, ISO-8859, ISO-8859, ISO-8859, windows-1253, ISO-8859, windows-1255, ISO-8859, windows-1251, windows-1256, KOI8-R, ISO-8859, windows-1254, Shift_JIS, GB18030, EUC-JP, EUC-KR, Big5, ISO-2022, ISO-2022, ISO-2022, IBM424_rtl, IBM424_ltr, IBM420_rtl, IBM420_ltr**: Tie-break order of detected charsets - if the detected charsets have equal confidence, charsets earlier in the list will be chosen in preference to those later. Adding `defaults` will place the unnamed charsets at that point.
-`ANSI_CHARSET`: **\<empty\>**: Default ANSI charset to override non-UTF-8 charsets to.
-`DEFAULT_REPO_UNITS`: **repo.code,repo.releases,repo.issues,repo.pulls,repo.wiki,repo.projects,repo.packages**: Comma separated list of default new repo units. Allowed values: \[repo.code, repo.releases, repo.issues, repo.pulls, repo.wiki, repo.projects\]. Note: Code and Releases can currently not be deactivated. If you specify default repo units you should still list them for future compatibility. External wiki and issue tracker can't be enabled by default as it requires additional settings. Disabled repo units will not be added to new repositories regardless if it is in the default list.
-`DEFAULT_FORK_REPO_UNITS`: **repo.code,repo.pulls**: Comma separated list of default forked repo units. The set of allowed values and rules is the same as `DEFAULT_REPO_UNITS`.
-`LINE_WRAP_EXTENSIONS`: **.txt,.md,.markdown,.mdown,.mkd,**: List of file extensions for which lines should be wrapped in the Monaco editor. Separate extensions with a comma. To line wrap files without an extension, just put a comma
-`PREVIEWABLE_FILE_MODES`: **markdown**: Valid file modes that have a preview API associated with them, such as `api/v1/markdown`. Separate the values by commas. The preview tab in edit mode won't be displayed if the file extension doesn't match.
-`DEFAULT_MERGE_MESSAGE_COMMITS_LIMIT`: **50**: In the default merge message for squash commits include at most this many commits. Set to `-1` to include all commits
-`DEFAULT_MERGE_MESSAGE_SIZE`: **5120**: In the default merge message for squash commits limit the size of the commit messages. Set to `-1` to have no limit. Only used if `POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES` is `true`.
-`DEFAULT_MERGE_MESSAGE_ALL_AUTHORS`: **false**: In the default merge message for squash commits walk all commits to include all authors in the Co-authored-by otherwise just use those in the limited list
-`DEFAULT_MERGE_MESSAGE_MAX_APPROVERS`: **10**: In default merge messages limit the number of approvers listed as `Reviewed-by:`. Set to `-1` to include all.
-`DEFAULT_MERGE_MESSAGE_OFFICIAL_APPROVERS_ONLY`: **true**: In default merge messages only include approvers who are officially allowed to review.
-`POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES`: **false**: In default squash-merge messages include the commit message of all commits comprising the pull request.
-`TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY`: **false**: PR patches are tested using a three-way merge method to discover if there are conflicts. If this setting is set to **true**, conflicting patches will be retested using `git apply` - This was the previous behaviour in 1.18 (and earlier) but is somewhat inefficient. Please report if you find that this setting is required.
-`ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`FILE_MAX_SIZE`: **3**: Max size of each file in megabytes.
-`MAX_FILES`: **5**: Max number of files per upload
### Repository - Release (`repository.release`)
-`ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`SIGNING_KEY`: **default**: \[none, KEYID, default \]: Key to sign with.
-`SIGNING_NAME`&`SIGNING_EMAIL`: if a KEYID is provided as the `SIGNING_KEY`, use these as the Name and Email address of the signer. These should match publicized name and email address for the key.
-`LOCAL_COPY_PATH`: **tmp/local-repo**: Path for temporary local repository copies. Defaults to `tmp/local-repo` (content gets deleted on Gitea restart)
## Repository - MIME type mapping (`repository.mimetype_mapping`)
Configuration for set the expected MIME type based on file extensions of downloadable files. Configuration presents in key-value pairs and file extensions starts with leading `.`.
The following configuration set `Content-Type: application/vnd.android.package-archive` header when downloading files with `.apk` file extension.
-`THEME_COLOR_META_TAG`: **#6cc644**: Value of `theme-color` meta tag, used by Android >= 5.0. An invalid color like "none" or "disable" will have the default style. More info: https://developers.google.com/web/updates/2014/11/Support-for-theme-color-in-Chrome-39-for-Android
-`MAX_DISPLAY_FILE_SIZE`: **8388608**: Max size of files to be displayed (default is 8MiB)
-`DEFAULT_SHOW_FULL_NAME`: **false**: Whether the full name of the users should be shown where possible. If the full name isn't set, the username will be used.
-`SEARCH_REPO_DESCRIPTION`: **true**: Whether to search within description at repository search on explore page.
-`MIN_TIMEOUT`: **10s**: These options control how often notification endpoint is polled to update the notification count. On page load the notification count will be checked after `MIN_TIMEOUT`. The timeout will increase to `MAX_TIMEOUT` by `TIMEOUT_STEP` if the notification count is unchanged. Set MIN_TIMEOUT to -1 to turn off.
-`EVENT_SOURCE_UPDATE_TIME`: **10s**: This setting determines how often the database is queried to update notification counts. If the browser client supports `EventSource` and `SharedWorker`, a `SharedWorker` will be used in preference to polling notification endpoint. Set to **-1** to disable the `EventSource`.
-`ENABLE_RENDER`: **true**: Whether to render SVG files as images. If SVG rendering is disabled, SVG files are displayed as text and cannot be embedded in markdown files as images.
- If `PROTOCOL` is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the _`AppWorkPath`_.
-`SSH_USER`: **%(BUILTIN_SSH_SERVER_USER)s**: SSH username displayed in clone URLs. This is only for people who configure the SSH server themselves; in most cases, you want to leave this blank and modify the `BUILTIN_SSH_SERVER_USER`.
-`SSH_CREATE_AUTHORIZED_KEYS_FILE`: **true**: Gitea will create a authorized_keys file by default when it is not using the internal ssh server. If you intend to use the AuthorizedKeysCommand functionality then you should turn this off.
-`SSH_TRUSTED_USER_CA_KEYS`: **\<empty\>**: Specifies the public keys of certificate authorities that are trusted to sign user certificates for authentication. Multiple keys should be comma separated. E.g.`ssh-<algorithm><key>` or `ssh-<algorithm> <key1>, ssh-<algorithm> <key2>`. For more information see `TrustedUserCAKeys` in the sshd config man pages. When empty no file will be created and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` will default to `off`.
-`SSH_TRUSTED_USER_CA_KEYS_FILENAME`: **`RUN_USER`/.ssh/gitea-trusted-user-ca-keys.pem**: Absolute path of the `TrustedUserCaKeys` file Gitea will manage. If you're running your own ssh server and you want to use the Gitea managed file you'll also need to modify your sshd_config to point to this file. The official docker image will automatically work without further configuration.
-`SSH_AUTHORIZED_PRINCIPALS_ALLOW`: **off** or **username, email**: \[off, username, email, anything\]: Specify the principals values that users are allowed to use as principal. When set to `anything` no checks are done on the principal string. When set to `off` authorized principal are not allowed to be set.
-`SSH_CREATE_AUTHORIZED_PRINCIPALS_FILE`: **false/true**: Gitea will create a authorized_principals file by default when it is not using the internal ssh server and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
-`SSH_AUTHORIZED_PRINCIPALS_BACKUP`: **false/true**: Enable SSH Authorized Principals Backup when rewriting all keys, default is true if `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
-`SSH_AUTHORIZED_KEYS_COMMAND_TEMPLATE`: **{{.AppPath}} --config={{.CustomConf}} serv key-{{.Key.ID}}**: Set the template for the command to passed on authorized keys. Possible keys are: AppPath, AppWorkPath, CustomConf, CustomPath, Key - where Key is a `models/asymkey.PublicKey` and the others are strings which are shellquoted.
-`SSH_SERVER_CIPHERS`: **chacha20-poly1305@openssh.com, aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, aes256-gcm@openssh.com**: For the built-in SSH server, choose the ciphers to support for SSH connections, for system SSH this setting has no effect.
-`SSH_SERVER_KEY_EXCHANGES`: **curve25519-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group14-sha1**: For the built-in SSH server, choose the key exchange algorithms to support for SSH connections, for system SSH this setting has no effect.
-`SSH_SERVER_MACS`: **hmac-sha2-256-etm@openssh.com, hmac-sha2-256, hmac-sha1**: For the built-in SSH server, choose the MACs to support for SSH connections, for system SSH this setting has no effect
-`SSH_SERVER_HOST_KEYS`: **ssh/gitea.rsa, ssh/gogs.rsa**: For the built-in SSH server, choose the keypairs to offer as the host key. The private key should be at `SSH_SERVER_HOST_KEY` and the public `SSH_SERVER_HOST_KEY.pub`. Relative paths are made absolute relative to the `APP_DATA_PATH`. If no key exists a 4096 bit RSA key will be created for you.
-`SSH_KEY_TEST_PATH`: **/tmp**: Directory to create temporary files in when testing public keys using ssh-keygen, default is the system temporary directory.
-`SSH_KEYGEN_PATH`: **ssh-keygen**: Path to ssh-keygen, default is 'ssh-keygen' which means the shell is responsible for finding out which one to call.
-`SSH_EXPOSE_ANONYMOUS`: **false**: Enable exposure of SSH clone URL to anonymous visitors, default is false.
-`CERT_FILE`: **https/cert.pem**: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
-`KEY_FILE`: **https/key.pem**: Key file path used for HTTPS. This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
-`STATIC_ROOT_PATH`: **_`StaticRootPath`_**: Upper level of template and static files path.
-`APP_DATA_PATH`: **data** (**/data/gitea** on docker): Default path for application data. Relative paths will be made absolute against _`AppWorkPath`_.
-`STATIC_CACHE_TIME`: **6h**: Web browser cache time for static resources on `custom/`, `public/` and all uploaded avatars. Note that this cache is disabled when `RUN_MODE` is "dev".
-`ENABLE_PPROF`: **false**: Application profiling (memory and cpu). For "web" command it listens on `localhost:6060`. For "serv" command it dumps to disk at `PPROF_DATA_PATH` as `(cpuprofile|memprofile)_<username>_<temporary id>`
-`LANDING_PAGE`: **home**: Landing page for unauthenticated users \[home, explore, organizations, login, **custom**\]. Where custom would instead be any URL such as "/org/repo" or even `https://anotherwebsite.com`
-`REDIRECT_OTHER_PORT`: **false**: If true and `PROTOCOL` is https, allows redirecting http requests on `PORT_TO_REDIRECT` to the https port Gitea listens on.
-`SSL_CIPHER_SUITES`: **ecdhe_ecdsa_with_aes_256_gcm_sha384,ecdhe_rsa_with_aes_256_gcm_sha384,ecdhe_ecdsa_with_aes_128_gcm_sha256,ecdhe_rsa_with_aes_128_gcm_sha256,ecdhe_ecdsa_with_chacha20_poly1305,ecdhe_rsa_with_chacha20_poly1305**: Set the preferred cipher suites.
-`ENABLE_ACME`: **false**: Flag to enable automatic certificate management via an ACME capable Certificate Authority (CA) server (default: Lets Encrypt). If enabled, `CERT_FILE` and `KEY_FILE` are ignored, and the CA must resolve `DOMAIN` to this gitea server. Ensure that DNS records are set and either port `80` or port `443` are accessible by the CA server (the public internet by default), and redirected to the appropriate ports `PORT_TO_REDIRECT` or `HTTP_PORT` respectively.
-`ACME_URL`: **\<empty\>**: The CA's ACME directory URL, e.g. for a self-hosted [smallstep CA server](https://github.com/smallstep/certificates), it can look like `https://ca.example.com/acme/acme/directory`. If left empty, it defaults to using Let's Encerypt's production CA (check `LETSENCRYPT_ACCEPTTOS` as well).
-`ACME_ACCEPTTOS`: **false**: This is an explicit check that you accept the terms of service of the ACME provider. The default is Lets Encrypt [terms of service](https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf).
-`ACME_DIRECTORY`: **https**: Directory that the certificate manager will use to cache information such as certs and private keys.
-`ACME_EMAIL`: **\<empty\>**: Email used for the ACME registration. Usually it is to notify about problems with issued certificates.
-`ACME_CA_ROOT`: **\<empty\>**: The CA's root certificate. If left empty, it defaults to using the system's trust chain.
-`ALLOW_GRACEFUL_RESTARTS`: **true**: Perform a graceful restart on SIGHUP
-`GRACEFUL_HAMMER_TIME`: **60s**: After a restart the parent process will stop accepting new connections and will allow requests to finish before stopping. Shutdown will be forced if it takes longer than this time.
-`STARTUP_TIMEOUT`: **0**: Shutsdown the server if startup takes longer than the provided time. On Windows setting this sends a waithint to the SVC host to tell the SVC host startup may take some time. Please note startup is determined by the opening of the listeners - HTTP/HTTPS/SSH. Indexers may take longer to startup and can have their own timeouts.
-`PASSWD`: **\<empty\>**: Database user password. Use \`your password\` or """your password""" for quoting if you use special characters in the password.
-`true`: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Gitea servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
-`false`: Disable TLS.
-`disable`: Alias for `false`, for compatibility with PostgreSQL.
-`skip-verify`: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
-`prefer`: Enable TLS with fallback to non-TLS connection.
-`verify-ca`: Enable TLS with verification of the database server certificate against its root certificate.
-`verify-full`: Enable TLS and verify the database server name matches the given certificate in either the `Common Name` or `Subject Alternative Name` fields.
-`SQLITE_JOURNAL_MODE`: **""**: Change journal mode for SQlite3. Can be used to enable [WAL mode](https://www.sqlite.org/wal.html) when high load causes write congestion. See [SQlite3 docs](https://www.sqlite.org/pragma.html#pragma_journal_mode) for possible values. Defaults to the default for the database file, often DELETE.
-`CHARSET`: **utf8mb4**: For MySQL only, either "utf8" or "utf8mb4". NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Gitea is unable to check this.
-`CONN_MAX_LIFETIME`**0 or 3s**: Sets the maximum amount of time a DB connection may be reused - default is 0, meaning there is no limit (except on MySQL where it is 3s - see #6804ᮟ).
-`ISSUE_INDEXER_TYPE`: **bleve**: Issue indexer type, currently supported: `bleve`, `db` or `elasticsearch`.
-`ISSUE_INDEXER_CONN_STR`: ****: Issue indexer connection string, available when ISSUE_INDEXER_TYPE is elasticsearch. i.e. http://elastic:changeme@localhost:9200
-`ISSUE_INDEXER_NAME`: **gitea_issues**: Issue indexer name, available when ISSUE_INDEXER_TYPE is elasticsearch
-`ISSUE_INDEXER_PATH`: **indexers/issues.bleve**: Index file used for issue search; available when ISSUE_INDEXER_TYPE is bleve and elasticsearch. Relative paths will be made absolute against _`AppWorkPath`_.
-`ISSUE_INDEXER_QUEUE_TYPE`: **levelqueue**: Issue indexer queue, currently supports:`channel`, `levelqueue`, `redis`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`ISSUE_INDEXER_QUEUE_DIR`: **queues/common**: When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this will be the path where the queue will be saved. **DEPRECATED** use settings in `[queue.issue_indexer]`. Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
-`ISSUE_INDEXER_QUEUE_CONN_STR`: **addrs=127.0.0.1:6379 db=0**: When `ISSUE_INDEXER_QUEUE_TYPE` is `redis`, this will store the redis connection string. When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this is a directory or additional options of the form `leveldb://path/to/db?option=value&....`, and overrides `ISSUE_INDEXER_QUEUE_DIR`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`ISSUE_INDEXER_QUEUE_BATCH_NUMBER`: **20**: Batch queue number. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`REPO_INDEXER_CONN_STR`: ****: Code indexer connection string, available when `REPO_INDEXER_TYPE` is elasticsearch. i.e. http://elastic:changeme@localhost:9200
-`REPO_INDEXER_NAME`: **gitea_codes**: Code indexer name, available when `REPO_INDEXER_TYPE` is elasticsearch
-`REPO_INDEXER_INCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **include** in the index. Use `**.txt` to match any files with .txt extension. An empty list means include all files.
-`REPO_INDEXER_EXCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **exclude** from the index. Files that match this list will not be indexed, even if they match in `REPO_INDEXER_INCLUDE`.
-`STARTUP_TIMEOUT`: **30s**: If the indexer takes longer than this timeout to start - fail. (This timeout will be added to the hammer time above for child processes - as bleve will not start until the previous parent is shutdown.) Set to -1 to never timeout.
-`DATADIR`: **queues/**: Base DataDir for storing persistent and level queues. `DATADIR` for individual queues can be set in `queue.name` sections but will default to `DATADIR/`**`common`**. (Previously each queue would default to `DATADIR/`**`name`**.) Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
-`CONN_STR`: **redis://127.0.0.1:6379/0**: Connection string for the redis queue type. Options can be set using query params. Similarly LevelDB options can also be set using: **leveldb://relative/path?option=value** or **leveldb:///absolute/path?option=value**, and will override `DATADIR`
-`QUEUE_NAME`: **_queue**: The suffix for default redis and disk queue name. Individual queues will default to **`name`**`QUEUE_NAME` but can be overridden in the specific `queue.name` section.
-`SET_NAME`: **_unique**: The suffix that will be added to the default redis and disk queue `set` name for unique queues. Individual queues will default to
**`name`**`QUEUE_NAME`_`SET_NAME`_ but can be overridden in the specific `queue.name` section.
-`WRAP_IF_NECESSARY`: **true**: Will wrap queues with a timeoutable queue if the selected queue is not ready to be created - (Only relevant for the level queue.)
-`MAX_ATTEMPTS`: **10**: Maximum number of attempts to create the wrapped queue
-`TIMEOUT`: **GRACEFUL_HAMMER_TIME + 30s**: Timeout the creation of the wrapped queue if it takes longer than this to create.
- Queues by default come with a dynamically scaling worker pool. The following settings configure this:
-`MAX_WORKERS`: **10**: Maximum number of worker go-routines for the queue.
-`BLOCK_TIMEOUT`: **1s**: If the queue blocks for this time, boost the number of workers - the `BLOCK_TIMEOUT` will then be doubled before boosting again whilst the boost is ongoing.
-`BOOST_TIMEOUT`: **5m**: Boost workers will timeout after this long.
Certain queues have defaults that override the defaults set in `[queue]` (this occurs mostly to support older configuration):
-`[queue.issue_indexer]`
-`TYPE` this will default to `[queue]``TYPE` if it is set but if not it will appropriately convert `[indexer]``ISSUE_INDEXER_QUEUE_TYPE` if that is set.
-`LENGTH` will default to `[indexer]``UPDATE_BUFFER_LEN` if that is set.
-`BATCH_LENGTH` will default to `[indexer]``ISSUE_INDEXER_QUEUE_BATCH_NUMBER` if that is set.
-`DATADIR` will default to `[indexer]``ISSUE_INDEXER_QUEUE_DIR` if that is set.
-`CONN_STR` will default to `[indexer]``ISSUE_INDEXER_QUEUE_CONN_STR` if that is set.
-`[queue.mailer]`
-`LENGTH` will default to **100** or whatever `[mailer]``SEND_BUFFER_LEN` is.
-`[queue.pr_patch_checker]`
-`LENGTH` will default to **1000** or whatever `[repository]``PULL_REQUEST_QUEUE_LENGTH` is.
-`[queue.mirror]`
-`LENGTH` will default to **1000** or whatever `[repository]``MIRROR_QUEUE_LENGTH` is.
-`SECRET_KEY`: **\<random at every install\>**: Global secret key. This key is VERY IMPORTANT, if you lost it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
-`SECRET_KEY_URI`: **<empty>**: Instead of defining SECRET_KEY, this option can be used to use the key stored in a file (example value: `file:/etc/gitea/secret_key`). It shouldn't be lost like SECRET_KEY.
-`REVERSE_PROXY_LIMIT`: **1**: Interpret X-Forwarded-For header or the X-Real-IP header and set this as the remote IP for the request.
Number of trusted proxy count. Set to zero to not use these headers.
-`REVERSE_PROXY_TRUSTED_PROXIES`: **127.0.0.0/8,::1/128**: List of IP addresses and networks separated by comma of trusted proxy servers. Use `*` to trust all.
-`ONLY_ALLOW_PUSH_IF_GITEA_ENVIRONMENT_SET`: **true**: Set to `false` to allow local users to push to gitea-repositories without setting up the Gitea environment. This is not recommended and if you want local users to push to Gitea repositories you should set the environment appropriately.
-`INTERNAL_TOKEN_URI`: **<empty>**: Instead of defining INTERNAL_TOKEN in the configuration, this configuration option can be used to give Gitea a path to a file that contains the internal token (example value: `file:/etc/gitea/internal_token`)
-`PASSWORD_HASH_ALGO`: **pbkdf2**: The hash algorithm to use \[argon2, pbkdf2, pbkdf2_v1, pbkdf2_hi, scrypt, bcrypt\], argon2 and scrypt will spend significant amounts of memory.
- Note: The default parameters for `pbkdf2` hashing have changed - the previous settings are available as `pbkdf2_v1` but are not recommended.
- The hash functions may be tuned by using `$` after the algorithm:
-`argon2$<time>$<memory>$<threads>$<key-length>`
-`bcrypt$<cost>`
-`pbkdf2$<iterations>$<key-length>`
-`scrypt$<n>$<r>$<p>$<key-length>`
- The defaults are:
-`argon2`: `argon2$2$65536$8$50`
-`bcrypt`: `bcrypt$10`
-`pbkdf2`: `pbkdf2$50000$50`
-`pbkdf2_v1`: `pbkdf2$10000$50`
-`pbkdf2_v2`: `pbkdf2$50000$50`
-`pbkdf2_hi`: `pbkdf2$320000$50`
-`scrypt`: `scrypt$65536$16$2$50`
- Adjusting the algorithm parameters using this functionality is done at your own risk.
-`PASSWORD_COMPLEXITY`: **off**: Comma separated list of character classes required to pass minimum complexity. If left empty or no valid values are specified, checking is disabled (off):
-`SUCCESSFUL_TOKENS_CACHE_SIZE`: **20**: Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations. This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.
## Camo (`camo`)
-`ENABLED`: **false**: Enable media proxy, we support images only at the moment.
-`REGISTER_EMAIL_CONFIRM`: _[service]_**REGISTER\_EMAIL\_CONFIRM**: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER\_EMAIL\_CONFIRM setting of the `[service]` section)
- auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)
-`NO_REPLY_ADDRESS`: **noreply.DOMAIN** Value for the domain part of the user's email address in the Git log if user has set KeepEmailPrivate to true. DOMAIN resolves to the value in server.DOMAIN.
-`PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy. If not given, will use global proxy setting.
-`PROXY_HOSTS`: **\<empty\>`**: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts. If not given, will use global proxy setting.
-`PROTOCOL`: **\<empty\>**: Mail server protocol. One of "smtp", "smtps", "smtp+starttls", "smtp+unix", "sendmail", "dummy". _Before 1.18, this was inferred from a combination of `MAILER_TYPE` and `IS_TLS_ENABLED`._
- SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
- **sendmail** Use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
- **dummy** Send email messages to the log as a testing phase.
- Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`, `FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
- Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
-`SMTP_ADDR`: **\<empty\>**: Mail server address. e.g. smtp.gmail.com. For smtp+unix, this should be a path to a unix socket instead. _Before 1.18, this was combined with `SMTP_PORT` under the name `HOST`._
-`SMTP_PORT`: **\<empty\>**: Mail server port. If no protocol is specified, it will be inferred by this setting. Common ports are listed below. _Before 1.18, this was combined with `SMTP_ADDR` under the name `HOST`._
- 25: insecure SMTP
- 465: SMTP Secure
- 587: StartTLS
-`USE_CLIENT_CERT`: **false**: Use client certificate for TLS/SSL.
-`FORCE_TRUST_SERVER_CERT`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe. Consider adding the certificate to the system trust store instead.
- Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or SMTP host is localhost. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
-`ENABLE_HELO`: **true**: Enable HELO operation.
-`HELO_HOSTNAME`: **(retrieved from system)**: HELO hostname.
-`FROM`: **\<empty\>**: Mail from address, RFC 5322. This can be just an email address, or the "Name" \<email@example.com\> format.
-`ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
-`SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be command or full path).
-`SENDMAIL_ARGS`: **\<empty\>**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
-`SENDMAIL_CONVERT_CRLF`: **true**: Most versions of sendmail prefer LF line endings rather than CRLF line endings. Set this to false if your version of sendmail requires CRLF line endings.
-`ENABLED`: **false**: Enable handling of incoming emails.
-`REPLY_TO_ADDRESS`: **\<empty\>**: The email address including the `%{token}` placeholder that will be replaced per user/action. Example: `incoming+%{token}@example.com`. The placeholder must appear in the user part of the address (before the `@`).
-`HOST`: **\<empty\>**: IMAP server host.
-`PORT`: **\<empty\>**: IMAP server port.
-`USERNAME`: **\<empty\>**: Username of the receiving account.
-`PASSWORD`: **\<empty\>**: Password of the receiving account.
-`USE_TLS`: **false**: Whether the IMAP server uses TLS.
-`SKIP_TLS_VERIFY`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe.
-`MAILBOX`: **INBOX**: The mailbox name where incoming mail will end up.
-`DELETE_HANDLED_MESSAGE`: **true**: Whether handled messages should be deleted from the mailbox.
-`MAXIMUM_MESSAGE_SIZE`: **10485760**: Maximum size of a message to handle. Bigger messages are ignored. Set to 0 to allow every size.
- TwoQueue LRU cache: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000` representing the maximum number of objects stored in the cache.
-`PROVIDER_CONFIG`: **data/sessions**: For file, the root path; for db, empty (database config will be used); for others, the connection string. Relative paths will be made absolute against _`AppWorkPath`_.
-`AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
-`REPOSITORY_AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
-`REPOSITORY_AVATAR_FALLBACK_IMAGE`: **/img/repo_default.png**: Image used as default repository avatar (if `REPOSITORY_AVATAR_FALLBACK` is set to image and none was uploaded)
-`ALLOWED_TYPES`: **.csv,.docx,.fodg,.fodp,.fods,.fodt,.gif,.gz,.jpeg,.jpg,.log,.md,.mov,.mp4,.odf,.odg,.odp,.ods,.odt,.pdf,.png,.pptx,.svg,.tgz,.txt,.webm,.xls,.xlsx,.zip**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`STORAGE_TYPE`: **local**: Storage type for attachments, `local` for local disk or `minio` for s3 compatible object storage service, default is `local` or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`MODE`: **console**: Logging mode. For multiple modes, use a comma to separate values. You can configure each mode in per mode log subsections `\[log.modename\]`. By default the file mode will log to `$ROOT_PATH/gitea.log`.
-`ENABLE_SSH_LOG`: **false**: save ssh log to log file
-`ENABLE_XORM_LOG`: **true**: Set whether to perform XORM logging. Please note SQL statement logging can be disabled by setting `LOG_SQL` to false in the `[database]` section.
NB: You must have `DISABLE_ROUTER_LOG` set to `false` for this option to take effect. Configure each mode in per mode log subsections `\[log.modename.router\]`.
-`ACCESS`: **file**: Logging mode for the access logger, use a comma to separate values. Configure each mode in per mode log subsections `\[log.modename.access\]`. By default the file mode will log to `$ROOT_PATH/access.log`. (If you set this to `,` it will log to the default Gitea logger.)
-`Identity`: the SignedUserName or `"-"` if not logged in.
-`Start`: the start time of the request.
-`ResponseWriter`: the responseWriter from the request.
- You must be very careful to ensure that this template does not throw errors or panics as this template runs outside of the panic/recovery script.
### Log subsections (`log.name`, `log.name.*`)
-`LEVEL`: **log.LEVEL**: Sets the log-level of this sublogger. Defaults to the `LEVEL` set in the global `[log]` section.
-`STACKTRACE_LEVEL`: **log.STACKTRACE_LEVEL**: Sets the log level at which to log stack traces.
-`MODE`: **name**: Sets the mode of this sublogger - Defaults to the provided subsection name. This allows you to have two different file loggers at different levels.
-`EXPRESSION`: **""**: A regular expression to match either the function name, file or message. Defaults to empty. Only log messages that match the expression will be saved in the logger.
-`FLAGS`: **stdflags**: A comma separated string representing the log flags. Defaults to `stdflags` which represents the prefix: `2009/01/23 01:23:23 ...a/b/c/d.go:23:runtime.Caller() [I]: message`. `none` means don't prefix log lines. See `modules/log/flags.go` for more information.
-`PULL_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling pull mirror updating).
-`PUSH_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling push mirror updating).
-`CLEANUP_TYPE`**OlderThan** OlderThan or PerWebhook Method to cleanup hook_task, either by age (i.e. how long ago hook_task record was delivered) or by the number to keep per webhook (i.e. keep most recent x deliveries per webhook).
-`OLDER_THAN`: **168h**: If CLEANUP_TYPE is set to OlderThan, then any delivered hook_task records older than this expression will be deleted.
-`NUMBER_TO_KEEP`: **10**: If CLEANUP_TYPE is set to PerWebhook, this is number of hook_task records to keep for a webhook (i.e. keep the most recent x deliveries).
-`UPDATE_EXISTING`: **true**: Create new users, update existing user data and disable users that are not in external source anymore (default) or only create new users if UPDATE_EXISTING is set to false.
-`OLDER_THAN`: **@every 8760h**: any action older than this expression will be deleted from database, suggest using `8760h` (1 year) because that's the max length of heatmap.
#### Cron - Garbage collect LFS pointers in repositories ('cron.gc_lfs')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`SCHEDULE`: **@every 24h**: Cron syntax to set how often to check.
-`OLDER_THAN`: **168h**: Only attempt to garbage collect LFSMetaObjects older than this (default 7 days)
-`LAST_UPDATED_MORE_THAN_AGO`: **72h**: Only attempt to garbage collect LFSMetaObjects that have not been attempted to be garbage collected for this long (default 3 days)
-`NUMBER_TO_CHECK_PER_REPO`: **100**: Minimum number of stale LFSMetaObjects to check per repo. Set to `0` to always check all.
-`PROPORTION_TO_CHECK_PER_REPO`: **0.6**: Check at least this proportion of LFSMetaObjects per repo. (This may cause all stale LFSMetaObjects to be checked.)
This directory will be used to contain the `.gitconfig` and possible `.gnupg` directories that Gitea's git calls will use. If you can confirm Gitea is the only application running in this environment, you can set it to the normal home directory for Gitea user.
-`ENABLE_AUTO_GIT_WIRE_PROTOCOL`: **true**: If use Git wire protocol version 2 when Git version >= 2.18, default is true, set to false when you always want Git wire protocol version 1.
To enable this for Git over SSH when using a OpenSSH server, add `AcceptEnv GIT_PROTOCOL` to your sshd_config file.
-`PULL_REQUEST_PUSH_MESSAGE`: **true**: Respond to pushes to a non-default branch with a URL for creating a Pull Request (if the repository has them enabled)
-`TOKEN`: **\<empty\>**: You need to specify the token, if you want to include in the authorization the metrics . The same token need to be used in prometheus parameters `bearer_token` or `bearer_token_file`.
-`JWT_SIGNING_ALGORITHM`: **RS256**: Algorithm used to sign OAuth2 tokens. Valid values: \[`HS256`, `HS384`, `HS512`, `RS256`, `RS384`, `RS512`, `ES256`, `ES384`, `ES512`\]
-`JWT_SECRET`: **\<empty\>**: OAuth2 authentication secret for access and refresh tokens, change this to a unique string. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `HS256`, `HS384` or `HS512`.
-`JWT_SIGNING_PRIVATE_KEY_FILE`: **jwt/private.pem**: Private key file path used to sign OAuth2 tokens. The path is relative to `APP_DATA_PATH`. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `RS256`, `RS384`, `RS512`, `ES256`, `ES384` or `ES512`. The file must contain a RSA or ECDSA private key in the PKCS8 format. If no key exists a 4096 bit key will be created for you.
List of locales shown in language selector. The first locale will be used as the default if user browser's language doesn't match any locale in the list.
-`NAMES`: **English,简体中文,繁體中文（香港）,繁體中文（台灣）,Deutsch,Français,Nederlands,Latviešu,Русский,Українська,日本語,Español,Português do Brasil,Português de Portugal,Polski,Български,Italiano,Suomi,Türkçe,Čeština,Српски,Svenska,한국어,Ελληνικά,فارسی,Magyar nyelv,Bahasa Indonesia,മലയാളം**: Visible names corresponding to the locales
- RENDER_CONTENT_MODE: **sanitized** How the content will be rendered.
- sanitized: Sanitize the content and render it inside current page, default to only allow a few HTML tags and attributes. Customized sanitizer rules can be defined in `[markup.sanitizer.*]`.
- no-sanitizer: Disable the sanitizer and render the content inside current page. It's **insecure** and may lead to XSS attack if the content contains malicious code.
- iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.
If `RENDER_CONTENT_MODE` is `sanitized`, Gitea supports customizing the sanitization policy for rendered HTML. The example below will support KaTeX output from pandoc.
-`QUEUE_CONN_STR`: **redis://127.0.0.1:6379/0**: Task queue connection string, available only when `QUEUE_TYPE` is `redis`. If redis needs a password, use `redis://123@127.0.0.1:6379/0`.
-`ALLOWED_DOMAINS`: **\<empty\>**: Domains allowlist for migrating repositories, default is blank. It means everything will be allowed. Multiple domains could be separated by commas. Wildcard is supported: `github.com, *.github.com`.
-`BLOCKED_DOMAINS`: **\<empty\>**: Domains blocklist for migrating repositories, default is blank. Multiple domains could be separated by commas. When `ALLOWED_DOMAINS` is not blank, this option has a higher priority to deny domains. Wildcard is supported.
-`ALLOW_LOCALNETWORKS`: **false**: Allow private addresses defined by RFC 1918, RFC 1122, RFC 4632 and RFC 4291. If a domain is allowed by `ALLOWED_DOMAINS`, this option will be ignored.
-`ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors. Pre-existing mirrors remain valid but won't be updated; may be converted to regular repo.
-`DISABLE_NEW_PULL`: **false**: Disable the creation of **new** pull mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
-`DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
is `data/lfs` and the default of `MINIO_BASE_PATH` is `lfs/`.
-`STORAGE_TYPE`: **local**: Storage type for lfs, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`PATH`: **./data/lfs**: Where to store LFS files, only available when `STORAGE_TYPE` is `local`. If not set it fall back to deprecated LFS_CONTENT_PATH value in [server] section.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_BASE_PATH`: **lfs/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
## Storage (`storage`)
Default storage configuration for attachments, lfs, avatars and etc.
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the data only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
And you can also define a customize storage like below:
```ini
[storage.my_minio]
STORAGE_TYPE = minio
; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
MINIO_ENDPOINT = localhost:9000
; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
MINIO_ACCESS_KEY_ID =
; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
MINIO_SECRET_ACCESS_KEY =
; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
MINIO_BUCKET = gitea
; Minio location to create bucket only available when STORAGE_TYPE is `minio`
MINIO_LOCATION = us-east-1
; Minio enabled ssl only available when STORAGE_TYPE is `minio`
MINIO_USE_SSL = false
```
And used by `[attachment]`, `[lfs]` and etc. as `STORAGE_TYPE`.
Configuration for repository archive storage. It will inherit from default `[storage]` or
`[storage.xxx]` when set `STORAGE_TYPE` to `xxx`. The default of `PATH`
is `data/repo-archive` and the default of `MINIO_BASE_PATH` is `repo-archive/`.
-`STORAGE_TYPE`: **local**: Storage type for repo archive, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`PATH`: **./data/repo-archive**: Where to store archive files, only available when `STORAGE_TYPE` is `local`.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_BASE_PATH`: **repo-archive/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
-`PROXY_ENABLED`: **false**: Enable the proxy if true, all requests to external via HTTP will be affected, if false, no proxy will be used even environment http_proxy/https_proxy
-`PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy
-`PROXY_HOSTS`: **\<empty\>**: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts.
-`DEFAULT_ACTIONS_URL`: **https://gitea.com**: Default address to get action plugins, e.g. the default value means downloading from "<https://gitea.com/actions/checkout>" for "uses: actions/checkout@v3"
`DEFAULT_ACTIONS_URL` indicates where should we find the relative path action plugin. i.e. when use an action in a workflow file like
```yaml
name: versions
on:
push:
branches:
- main
- releases/*
jobs:
build:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
```
Now we need to know how to get actions/checkout, this configuration is the default git server to get it. That means we will get the repository via git clone ${DEFAULT_ACTIONS_URL}/actions/checkout and fetch tag v3.
To help people who don't want to mirror these actions in their git instances, the default value is https://gitea.com
To help people run actions totally in their network, they can change the value and copy all necessary action repositories into their git server.
Of course we should support the form in future PRs like
