Migrate git hook editor to monaco, replacing CodeMirror. Had to do a few
refactors to make the monaco instantiation generic enough to be of use.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add Vue linting
Turns out the .vue files were not linted at all, so I added that as well
as re-indented the file to 2-space and fixed all reasonable issues that
cam up except one case of a unintended side effect for which I have no
idea how to fix it, so the rule was disabled.
* misc tweaks
* update lockfile
* use overrides to include .vue files
* treat warnings as errors on lint-frontend
* also treat stylelint warnings as errors
* use equal sign syntax
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Some minor refactors I did while investigating another issue.
Functionalily should be pretty much the same as before.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix 'add code comment' button being invisible all the time
* Fix off-center icon
* Remove old JS hover hack
* Show on full-line hover
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix scrolling to resolved comment anchors
As described on discord, when the window.location.hash refers to a
resolved comment then the scroll to functionality does not work.
This PR fixes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* added mastodon provider to oauth code
* changed go.mod and vendor/modules.txt to add updated goth
* vendored mastodon and new goth
* committing result of go mod tidy && go mod vendor
* added pic and mastodon to oauth models
* handled instance url
* applied lafriks suggestion
* Update web_src/js/index.js
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Start fixing Issue & PR title on mobile
Signed-off-by: kolaente <k@knt.li>
* Make sure the save & cancel buttons float right
Signed-off-by: kolaente <k@knt.li>
* Fix edit buttons and title input on mobile
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix#13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Update some JS dependencies
- Update selective dependencies that are compatible with webpack 4. We
can not upgrade to webpack 5 yet because `license-webpack-plugin` is
incompatible.
- Enable a few new eslint rules and fix new issues
* fix comment
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
#11141 broke the appearance of dropzone attachments when editting
comments causing poorly updating lists.
This PR fixes this.
Fix#12583
Signed-off-by: Andrew Thornton art27@cantab.net
Just copy it from the WIKI tool bar :)
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Blame and regular code view have diverge slightly so line highlighting wasn't working properly anymore. Make work again in lieu of a larger refactor of blame HTML to move it outside of source and into templates to match code view.
Fixes#12836
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This is a port of gogs/gogs#4398
The only changes made by myself are:
Add locales
Add some JS to the UI
Otherwise all code credit goes to @aboron
Resolves#10829
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Remove duplicate logic in initListSubmits
Using the same logic to handle Choosing reviewers and assignees as
choosing label. It's the first step of #10926.
Signed-off-by: a1012112796 <1012112796@qq.com>
* fix choose block
* fix nit
* try fix bug
* simple code
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
If the user has pressed commit changes and the post has failed - do not disable
the commit changes button.
Fix#12072
Signed-off-by: Andrew Thornton <art27@cantab.net>
The previous method did not escape single quotes which under some
circumstances can lead to XSS vulnerabilites and the fact that it
depends on jQuery is also not ideal. Replace it with a lightweight
module.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move jquery-minicolors to npm/webpack
- Unvendor and add as npm dependency
- Removed unneeded backend variable
- Fixed existing bug where picker would previously initizalize to the
same green color when editing a label.
There was probably a version bump because the previous version was
over 3 years old but it seems to be compatible.
* use file-loader
* trailing comma and comment update
* misc tweaks
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add mermaid JS renderer
For feature parity with GitLab. Tested in files, issues, wiki, editor.
arc-green only does an inversion because the renderer seems to like to
render white backgrounds on boxes.
Ref: https://github.com/go-gitea/gitea/issues/3340
Fixes: https://github.com/go-gitea/gitea/issues/12307
* add feature entry, switch to neutral theme, remove border
* add bindFunctions support
* remove unnecessary border-radius
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Auto-init repo on license, .gitignore select
When a .gitignore or LICENSE file is added, the user is expecting the
repository to be auto-initialized. However, nothing sets the auto_init
value, so it remains at its default. We should set it to checked when
a .gitignore or LICENSE file is added, matching user expectations. If
the user clears .gitignore or LICENSE, it will leave repository creation
enabled. If the user changes the value again, it will re-check the box
if the user has since de-checked it. This behavior is at least
consistent.
Resolves: #11071
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Update Octicons to v10
Besides a few renames, these icons are no longer present in v10 that we've
used, so had to change:
file-symlink-directory -> file-submodule
internal-repo -> repo
repo-force-push -> repo-push
repo-template-private -> repo-template
Fixes: https://github.com/go-gitea/gitea/issues/11889
Ref: https://github.com/primer/octicons/releases/tag/v10.0.0
* add custom sliders svg for removed octicon-settings
* apply suggestion
* fix triangles and use play on admin dashboard
* add custom mirror svg
* add missing build files
* unify custom svgs
* move to octicon-repo-clone to gitea-mirror
* use octicon-x on conflicts
* tweak timeline icons
* tweak comment buttons
* update settings icon to octicons v1
* switch to octicon-mirror and octicon-tools
* replace two wiki buttons with octicons
* remove whitespace in svg sources
* Fix filepath basename on Windows for SVG bindata (#12241)
* move octicons to devDependencies
* move back to dependencies
* move svgo to devDependencies again
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- replace font-awesome icons with octicons
- clean up js and css surrounding the code expansion and file folding
- fix hover color on arc-green
- tweak diff line number colors
Co-authored-by: zeripath <art27@cantab.net>
Introduce 'make svg' which calls a node script that compiles svg files
to `public/img/svg`. These files are vendored to not create a dependency
on Node for the backend build.
On the frontend side, configure webpack using `raw-loader` so SVGs can
be imported as string.
Also moved our existing SVGs to web_src/svg for consistency.
Fixes: https://github.com/go-gitea/gitea/issues/11618
Move EventSource to use a SharedWorker. This prevents issues with HTTP/1.1
open browser connections from preventing gitea from opening multiple tabs.
Also allow setting EVENT_SOURCE_UPDATE_TIME to disable EventSource updating
Fix#11978
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Server-side syntax hilighting for all code
This PR does a few things:
* Remove all traces of highlight.js
* Use chroma library to provide fast syntax hilighting directly on the server
* Provide syntax hilighting for diffs
* Re-style both unified and split diffs views
* Add custom syntax hilighting styling for both regular and arc-green
Fixes#7729Fixes#10157Fixes#11825Fixes#7728Fixes#3872Fixes#3682
And perhaps gets closer to #9553
* fix line marker
* fix repo search
* Fix single line select
* properly load settings
* npm uninstall highlight.js
* review suggestion
* code review
* forgot to call function
* fix test
* Apply suggestions from code review
suggestions from @silverwind thanks
Co-authored-by: silverwind <me@silverwind.io>
* code review
* copy/paste error
* Use const for highlight size limit
* Update web_src/less/_repository.less
Co-authored-by: Lauris BH <lauris@nix.lv>
* update size limit to 1MB and other styling tweaks
* fix highlighting for certain diff sections
* fix test
* add worker back as suggested
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
This changes the links on headings like '# Usage' in markdown from
`https://host/user/repo#user-content-usage`
to just
`https://host/user/repo#usage`
matching GitHub and GitLab. The linked id elements still have the prefix
and this behaviour matches GitHub and GitLab too, so JS is needed to
scroll to the active anchor. I suspect it's like that to avoid namespace
collission between user-generated content and other page content.
Compatibilty for old links is included so they will continue to work.
Also included are some enhancements to make the clickable area for the
link icon larger and fix its color on arc-green.
Fixes: https://github.com/go-gitea/gitea/issues/11896
Fixes: https://github.com/go-gitea/gitea/issues/12062
* Fix sticky diff stats container
* Use pure CSS sticky instead of Fomantic's JS
* add border color to arc-green
* add slight padding on sides
* make linter happy
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Don't add same line code comment box twice
Clicking the same '+' button multiple times adds multiple comment boxes
to the same line. Prevent this by assigning a unique key to each comment
box and checking if it already exists in the DOM.
Also cleaned up the code around this a bit.
* Update web_src/js/index.js
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This removes the jQuery plugin as well as the associated config options.
Native input[type=date] does not require a language attribute as it is
localized by default, except for the placeholder attribute for which I
currently piggy-back the repo.issues.due_date_form localization option.
Implementation should pretty much match GH. Of note is that Safari does
not provide a UI for this input type, but I don't think providing one is
neccessary and GH did not bother either.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Show multiple octicons on repo list
* fix mixed spaces/tabs
* Internal repo octicon
* show internal icon in dashboard repolist
* swagger
* fix icon for normal repo on repo page
* don't expose owner visibility directly; provide internal in repo api
* fix icons for forks and mirrors
Co-authored-by: Lauris BH <lauris@nix.lv>
* Properly truncate system notices
As noted in #11658 the system notifications list will always suffix
system notices with ... even when the notice is longer than 120
characters.
Instead we should use .text.truncate to auto truncate and make the
notices clickable to view their details.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @CirnoT make table cell clickable
* ensure that pre wraps
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes#11540
GH has different HardBreaks behaviour for markdown comments and documents.
Comments have hard breaks and documents have soft breaks - therefore Gitea's rendering will always be different from GH's if we only provide one setting.
Here we split the setting in to two - one for documents and one for comments and other things.
Signed-off-by: Andrew Thornton art27@cantab.net
Changes to index.js as per @silverwind
Co-authored-by: silverwind <me@silverwind.io>
Changes to docs as per @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix serviceworker output file and misc improvements
- Fix output file location for production build
- Cache more asset types: fonts and worker variants
- Parallelize a few tasks during initalization
- Only invalidate caches starting with our prefix
- Remove public/serviceworker.js before building
- Remove font preloads, they cause strange cors issues
- Misc eslint config adjustments
* remove webpack output files on watch-frontend
* Fix Enter not working in SimpleMDE
This condition was wrongly inverted, leading to all enter keys being
blocked.
Fixes: https://github.com/go-gitea/gitea/issues/11559
* fix it for absent tribute too
