Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
Also resolves a warning for current releases
```
| ##[group]GitHub Actions runtime token ACs
| ##[warning]Cannot parse GitHub Actions Runtime Token ACs: "undefined" is not valid JSON
| ##[endgroup]
====>
| ##[group]GitHub Actions runtime token ACs
| ##[endgroup]
```
\* this is an error in v3
References in the docker org:
-
831ca179d3/src/main.ts (L24)
-
7d8b4dc669/src/github.ts (L61)
No known official action of GitHub makes use of this claim.
Current releases throw an error when configure to use actions cache
```
| ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
| ##[error]buildx failed with: ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
```
1. Fix incorrect `HookEventType` for issue-related events in
`IssueChangeAssignee`
2. Add `case "types"` in the `switch` block in `matchPullRequestEvent`
to avoid warning logs
Fix#29175
Replace #29207
This PR makes some improvements to the `issue_comment` workflow trigger
event.
1. Fix the bug that pull requests cannot trigger `issue_comment`
workflows
2. Previously the `issue_comment` event only supported the `created`
activity type. This PR adds support for the missing `edited` and
`deleted` activity types.
3. Some events (including `issue_comment`, `issues`, etc. ) only trigger
workflows that belong to the workflow file on the default branch. This
PR introduces the `IsDefaultBranchWorkflow` function to check for these
events.
https://github.com/go-gitea/gitea/pull/27172#discussion_r1493735466
When cleanup artifacts, it removes storage first. If storage is not
exist (maybe delete manually), it gets error and continue loop. It makes
a dead loop if there are a lot pending but non-existing artifacts.
Now it updates db record at first to avoid keep a lot of pending status
artifacts.
Fix#29166
Add support for the following activity types of `pull_request`
- assigned
- unassigned
- review_requested
- review_request_removed
- milestoned
- demilestoned
This change allows act_runner / actions_runner to use jwt tokens for
`ACTIONS_RUNTIME_TOKEN` that are compatible with
actions/upload-artifact@v4.
The official Artifact actions are now validating and extracting the jwt
claim scp to get the runid and jobid, the old artifact backend also
needs to accept the same token jwt.
---
Related to #28853
I'm not familar with the auth system, maybe you know how to improve this
I have tested
- the jwt token is a valid token for artifact uploading
- the jwt token can be parsed by actions/upload-artifact@v4 and passes
their scp claim validation
Next steps would be a new artifacts@v4 backend.
~~I'm linking the act_runner change soonish.~~
act_runner change to make the change effective and use jwt tokens
<https://gitea.com/gitea/act_runner/pulls/471>
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fixes#28699
This PR implements the `MigrateRepository` method for `actionsNotifier`
to detect the schedules from the workflow files in the migrated
repository.
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
Replace #22751
1. only support the default branch in the repository setting.
2. autoload schedule data from the schedule table after starting the
service.
3. support specific syntax like `@yearly`, `@monthly`, `@weekly`,
`@daily`, `@hourly`
## How to use
See the [GitHub Actions
document](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#schedule)
for getting more detailed information.
```yaml
on:
schedule:
- cron: '30 5 * * 1,3'
- cron: '30 5 * * 2,4'
jobs:
test_schedule:
runs-on: ubuntu-latest
steps:
- name: Not on Monday or Wednesday
if: github.event.schedule != '30 5 * * 1,3'
run: echo "This step will be skipped on Monday and Wednesday"
- name: Every time
run: echo "This step will always run"
```
Signed-off-by: Bo-Yi.Wu <appleboy.tw@gmail.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
In the original implementation, we can only get the first 30 records of
the commit status (the default paging size), if the commit status is
more than 30, it will lead to the bug #25990. I made the following two
changes.
- On the page, use the ` db.ListOptions{ListAll: true}` parameter
instead of `db.ListOptions{}`
- The `GetLatestCommitStatus` function makes a determination as to
whether or not a pager is being used.
fixed#25990
- cancel running jobs if the event is push
- Add a new function `CancelRunningJobs` to cancel all running jobs of a
run
- Update `FindRunOptions` struct to include `Ref` field and update its
condition in `toConds` function
- Implement auto cancellation of running jobs in the same workflow in
`notify` function
related task: https://github.com/go-gitea/gitea/pull/22751/
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fix#25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
