This has several advantages:
1. It takes up less space on disk in-between builds in the nix store.
2. It uses less space in the binary cache for vendor derivation packages.
3. It uses less network traffic downloading from the binary cache.
4. It plays nicely with hashed mirrors like tarballs.nixos.org, which only
substitute --flat hashes on single files (not recursive directory hashes).
5. It's consistent with how simple `fetchurl` src derivations work.
6. It provides a stronger abstraction between input src-package and output
package, e.g., it's harder to accidentally depend on the src derivation at
runtime by referencing something like `${src}/etc/index.html`. Likewise, in
the store it's harder to get confused with something that is just there as a
build-time dependency vs. a runtime dependency, since the build-time
src dependencies are tarred up.
Disadvantages are:
1. It takes slightly longer to untar at the start of a build.
As currently implemented, this attaches the compacted vendor.tar.gz feature as a
rider on `verifyCargoDeps`, since both of them are relatively newly implemented
behavior that change the `cargoSha256`.
If this PR is accepted, I will push forward the remaining rust packages with a
series of treewide PRs to update the `cargoSha256`s.
No material changes to docs, but trying to sanitize them for consistent
readability prior to looking at #75837.
- Use `*` for lists instead of `-`. I have no opinion one way or the other, but
the latter was only used in 1-2 places.
- Pad the code blocks with whitespace.
- Wrap to 80 characters, except for a few 1-liners that were only slightly over.
When updating the section to python 3 some places still
referred to pythonPackages and were overlooked.
Decided to switch it to be more similar to the first
example binding pythonPackages and clarified comments a
bit based on confusion I observed on IRC.
Related to https://github.com/NixOS/nixpkgs/pull/77569
Updating section about imperative use of ad-hoc virtual-environments for
use of pythons built-in `venv` module via venvShellHook. Also trying to
make it a bit friendlier to beginners by adding a bit more explanation
to the code snippet and some remarks old-school virtualenv.
Adjusting for venvShellHook and adding manual example
Adding pip install and replacing python2 example with python3
When modSha256 is null, disable the nix sandbox instead of using a
fixed-output derivation. This requires the nix-daemon to have
`sandbox = relaxed` set in their config to work properly.
Because the output is (hopefully) deterministic based on the inputs,
this should give a reproducible output. This is useful for development
outside of nixpkgs where re-generating the modSha256 on each mod.sum
changes is cumbersome.
Don't use this in nixpkgs! This is why null is not the default value.
We shouldn’t force the user to have a C compiler in scope, just
because the derivation is forced to build locally. That can’t be
counted as “lightweight” anymore.
Co-Authored-By: Silvan Mosberger<contact@infinisil.com>
This has the same motivation as fetchFromGitHub/fetchFromGitLab --
it's cheaper to download a tarball of a single revision than it is to
download a whole history.
I could have gone with domain/group/repo, like fetchFromGitLab, but it
would have made implementation more difficult, and this syntax means
it's a drop-in replacement for fetchgit, so I decided it wasn't worth
it.
The package set is not maintained. It is also not used by most of the
BEAM community. Removing it to allow a more useful set of tools fit to
the BEAM community in Nixpkgs.
In my opinion Functions should only contain pure functions. These are
both meant to provide derivations so I put them under Builders. Don't
know exactly *where* to put them so "special" it is...
Reorganize the chapters into parts and reduce the TOC depth to make the
TOC useful again. The top-level TOC is very brief, but that is fine
because every part will have its own TOC.
Section titles of languages/frameworks are also simplified to just
the name of the language/framework.
@garbas and @seppeljordan, are these updates correct?
I removed `offlinehacker/pypi2nix` as an unmaintained ancestor of the current repo `nix-community/pypi2nix`. It appears @garbas forked `offlinehacker/pypi2nix` to `garbas/pypi2nix` and then handed off maintainership to @seppeljordan, transferring the repo to `nix-community/pypi2nix`.
One issue with cargoSha256 is that it's hard to detect when it needs to
be updated or not. It's possible to upgrade a package and forget to
update cargoSha256 and run with old versions of the program or
libraries.
This commit introduces `verifyCargoDeps` which, when enabled, will check
that the Cargo.lock is not out of date in the cargoDeps by comparing it
with the package source.
This commit splits the `buildPythonPackage` into multiple setup hooks.
Generally, Python packages are built from source to wheels using `setuptools`.
The wheels are then installed with `pip`. Tests were often called with
`python setup.py test` but this is less common nowadays. Most projects
now use a different entry point for running tests, typically `pytest`
or `nosetests`.
Since the wheel format was introduced more tools were built to generate these,
e.g. `flit`. Since PEP 517 is provisionally accepted, defining a build-system
independent format (`pyproject.toml`), `pip` can now use that format to
execute the correct build-system.
In the past I've added support for PEP 517 (`pyproject`) to the Python
builder, resulting in a now rather large builder. Furthermore, it was not possible
to reuse components elsewhere. Therefore, the builder is now split into multiple
setup hooks.
The `setuptoolsCheckHook` is included now by default but in time it should
be removed from `buildPythonPackage` to make it easier to use another hook
(curently one has to pass in `dontUseSetuptoolsCheck`).
This is a new package that provides a shell hook to make it easy to
declare manpages and shell completions in a manner that doesn't require
remembering where to actually install them. Basic usage looks like
{ stdenv, installShellFiles, ... }:
stdenv.mkDerivation {
# ...
nativeBuildInputs = [ installShellFiles ];
postInstall = ''
installManPage doc/foobar.1
installShellCompletion --bash share/completions/foobar.bash
installShellCompletion --fish share/completions/foobar.fish
installShellCompletion --zsh share/completions/_foobar
'';
# ...
}
See source comments for more details on the functions.
This setup hook modifies a Perl script so that any "-I" flags in its shebang
line are rewritten into a "use lib ..." statement on the next line. This gets
around a limitation in Darwin, which will not properly handle a script whose
shebang line exceeds 511 characters.
This system type was previously broken but is now fixed.
Add it here to showcase the common task of launching a fully-fledged Android
system with an included app store.
New release available:
https://www.citrix.com/downloads/workspace-app/linux/workspace-app-for-linux-latest.html
Apart from the new version the following things changed:
* Updated the docs as all notes about `citrix_receiver` also apply for
`citrix_workspace`. Also added a deprecation warning about the
upcoming removal.
* Removed the `libidn_134` override as neither `citrix_workspace_19_3_0`
nor `citrix_workspace_19_6_0` require this library anymore according
to `readelf -d ./result/opt/citrix-icaclient/wfica` (in contrast to
`citrix_receiver_13_10_0`).
* Added myself as maintainer as well.
Motivation: There is a thriving plugin ecosystem for Kakoune now,
and it is nice to add these in our Nix configurations. This was modeled
on neovim's plugins.
parinfer-rust is useable both standalone and as a Kakoune plugin,
so the plugin file inherits the same definition as pkgs.
I'll make PRs for other plugins if this gets accepted.
[Here](https://github.com/eraserhd/nixpkgs/tree/kak-ansi)'s a tested
branch for the `kak-ansi` plugin.
* manual: rename to users and contributors manual, add some user notes that should be there but don't fit in any chapter
* manual: move the package notes that are completely usage-related to the upper user notes section
* manual: link to package-specific development notes from user notes
With remote builds, the sandbox can't be accessed by `cntr` as it is on
a different machine. I decided to put this into an extra `note` block as it took
me admittedly too much time to figure this out.
There was a bunch of stuff in the cross section that haddn't had any
attention in a while. I might need to slim it down later, but this is
good for now.
$(shell ...) looks a little sketch like it will be run no matter what.
And there are problems building the manual on darwin so hopefully this
fixes them.
The function buildGoModule builds Go programs managed with Go modules. It builds
a Go module through a two phase build:
- An intermediate fetcher derivation. This derivation will be used to
fetch all of the dependencies of the Go module.
- A final derivation will use the output of the intermediate derivation
to build the binaries and produce the final output.
Especially older hardware doesn't support AVX instructions. DLib is
still functional there, but significantly slower[1].
By setting `avxInstructions` to false, DLib will be compiled without
this feature.
[1] http://dlib.net/compile.html
Whenever we create scripts that are installed to $out, we must use runtimeShell
in order to get the shell that can be executed on the machine we create the
package for. This is relevant for cross-compiling. The only use case for
stdenv.shell are scripts that are executed as part of the build system.
Usages in checkPhase are borderline however to decrease the likelyhood
of people copying the wrong examples, I decided to use runtimeShell as well.
The appimageTools attrset contains utilities to prevent
the usage of appimage-run to package AppImages, like done/attempted
in #49370 and #53156.
This has the advantage of allowing for per-package environment changes,
and extracts into the store instead of the users home directory.
The package list was extracted into appimageTools to prevent
duplication.
Since #53055 was merged the Makefile for the manual could not be run
correctly as the generated function documentation was included, but
not actually generated.
This adds the necessary generation step by first building the XML file
containing function locations and preserving its store path in a
variable, which is then used both for linking of the locations file
and as a build input for the function docs generator.
This fixes#55014
Comments on conflicts:
- llvm: d6f401e1 vs. 469ecc70 - docs for 6 and 7 say the default is
to build all targets, so we should be fine
- some pypi hashes: they were equivalent, just base16 vs. base32
