From cc03f4c58b03b054db8c11e77e454bc195cca007 Mon Sep 17 00:00:00 2001 From: Richard van der Hoff Date: Fri, 2 Dec 2016 10:33:50 +0000 Subject: [PATCH] Rearrange the README Move some bits of the README around. No words were changed in the making of this commit. --- README.rst | 178 ++++++++++++++++++++++++++++------------------------- 1 file changed, 93 insertions(+), 85 deletions(-) diff --git a/README.rst b/README.rst index e0e835f14..8f8ba7366 100644 --- a/README.rst +++ b/README.rst @@ -11,7 +11,7 @@ VoIP. The basics you need to know to get up and running are: like ``#matrix:matrix.org`` or ``#test:localhost:8448``. - Matrix user IDs look like ``@matthew:matrix.org`` (although in the future - you will normally refer to yourself and others using a third party identifier + you will normally refer to yourself and others using a third party identifier (3PID): email address, phone number, etc rather than manipulating Matrix user IDs) The overall architecture is:: @@ -26,6 +26,7 @@ bridge at irc://irc.freenode.net/matrix. Synapse is currently in rapid development, but as of version 0.5 we believe it is sufficiently stable to be run as an internet-facing service for real usage! + About Matrix ============ @@ -87,6 +88,7 @@ Thanks for using Matrix! [1] End-to-end encryption is currently in development - see https://matrix.org/git/olm + Synapse Installation ==================== @@ -156,8 +158,8 @@ In case of problems, please see the _Troubleshooting section below. Alternatively, Silvio Fricke has contributed a Dockerfile to automate the above in Docker at https://registry.hub.docker.com/u/silviof/docker-matrix/. -Also, Martin Giess has created an auto-deployment process with vagrant/ansible, -tested with VirtualBox/AWS/DigitalOcean - see https://github.com/EMnify/matrix-synapse-auto-deploy +Also, Martin Giess has created an auto-deployment process with vagrant/ansible, +tested with VirtualBox/AWS/DigitalOcean - see https://github.com/EMnify/matrix-synapse-auto-deploy for details. To set up your homeserver, run (in your virtualenv, as before):: @@ -195,6 +197,7 @@ you can use the command line to register new users:: For reliable VoIP calls to be routed via this homeserver, you MUST configure a TURN server. See docs/turn-howto.rst for details. + Running Synapse =============== @@ -205,6 +208,42 @@ run (e.g. ``~/.synapse``), and:: source ./bin/activate synctl start + +Running The Demo Web Client +=========================== + +The homeserver runs a web client by default at https://localhost:8448/. + +If this is the first time you have used the client from that browser (it uses +HTML5 local storage to remember its config), you will need to log in to your +account. If you don't yet have an account, because you've just started the +homeserver for the first time, then you'll need to register one. + +Registering A New Account +------------------------- + +Your new user name will be formed partly from the hostname your server is +running as, and partly from a localpart you specify when you create the +account. Your name will take the form of:: + + @localpart:my.domain.here + (pronounced "at localpart on my dot domain dot here") + +Specify your desired localpart in the topmost box of the "Register for an +account" form, and click the "Register" button. Hostnames can contain ports if +required due to lack of SRV records (e.g. @matthew:localhost:8448 on an +internal synapse sandbox running on localhost). + +If registration fails, you may need to enable it in the homeserver (see +`Synapse Installation`_ above) + +Logging In To An Existing Account +--------------------------------- + +Just enter the ``@localpart:my.domain.here`` Matrix user ID and password into +the form and click the Login button. + + Security Note ============= @@ -220,24 +259,6 @@ server on the same domain. See https://github.com/vector-im/vector-web/issues/1977 and https://developer.github.com/changes/2014-04-25-user-content-security for more details. -Using PostgreSQL -================ - -As of Synapse 0.9, `PostgreSQL `_ is supported as an -alternative to the `SQLite `_ database that Synapse has -traditionally used for convenience and simplicity. - -The advantages of Postgres include: - -* significant performance improvements due to the superior threading and - caching model, smarter query optimiser -* allowing the DB to be run on separate hardware -* allowing basic active/backup high-availability with a "hot spare" synapse - pointing at the same DB master, as well as enabling DB replication in - synapse itself. - -For information on how to install and use PostgreSQL, please see -`docs/postgres.rst `_. Platform Specific Instructions ============================== @@ -340,6 +361,7 @@ Troubleshooting: you do, you may need to create a symlink to ``libsodium.a`` so ``ld`` can find it: ``ln -s /usr/local/lib/libsodium.a /usr/lib/libsodium.a`` + Troubleshooting =============== @@ -413,37 +435,6 @@ you will need to explicitly call Python2.7 - either running as:: ...or by editing synctl with the correct python executable. -Synapse Development -=================== - -To check out a synapse for development, clone the git repo into a working -directory of your choice:: - - git clone https://github.com/matrix-org/synapse.git - cd synapse - -Synapse has a number of external dependencies, that are easiest -to install using pip and a virtualenv:: - - virtualenv env - source env/bin/activate - python synapse/python_dependencies.py | xargs -n1 pip install - pip install setuptools_trial mock - -This will run a process of downloading and installing all the needed -dependencies into a virtual env. - -Once this is done, you may wish to run Synapse's unit tests, to -check that everything is installed as it should be:: - - python setup.py test - -This should end with a 'PASSED' result:: - - Ran 143 tests in 0.601s - - PASSED (successes=143) - Upgrading an existing Synapse ============================= @@ -454,6 +445,7 @@ versions of synapse. .. _UPGRADE.rst: UPGRADE.rst + Setting up Federation ===================== @@ -521,41 +513,26 @@ http://localhost:8080. Simply run:: This is mainly useful just for development purposes. -Running The Demo Web Client -=========================== -The homeserver runs a web client by default at https://localhost:8448/. +Using PostgreSQL +================ -If this is the first time you have used the client from that browser (it uses -HTML5 local storage to remember its config), you will need to log in to your -account. If you don't yet have an account, because you've just started the -homeserver for the first time, then you'll need to register one. +As of Synapse 0.9, `PostgreSQL `_ is supported as an +alternative to the `SQLite `_ database that Synapse has +traditionally used for convenience and simplicity. +The advantages of Postgres include: -Registering A New Account -------------------------- +* significant performance improvements due to the superior threading and + caching model, smarter query optimiser +* allowing the DB to be run on separate hardware +* allowing basic active/backup high-availability with a "hot spare" synapse + pointing at the same DB master, as well as enabling DB replication in + synapse itself. -Your new user name will be formed partly from the hostname your server is -running as, and partly from a localpart you specify when you create the -account. Your name will take the form of:: +For information on how to install and use PostgreSQL, please see +`docs/postgres.rst `_. - @localpart:my.domain.here - (pronounced "at localpart on my dot domain dot here") - -Specify your desired localpart in the topmost box of the "Register for an -account" form, and click the "Register" button. Hostnames can contain ports if -required due to lack of SRV records (e.g. @matthew:localhost:8448 on an -internal synapse sandbox running on localhost). - -If registration fails, you may need to enable it in the homeserver (see -`Synapse Installation`_ above) - - -Logging In To An Existing Account ---------------------------------- - -Just enter the ``@localpart:my.domain.here`` Matrix user ID and password into -the form and click the Login button. Identity Servers ================ @@ -605,8 +582,8 @@ First calculate the hash of the new password: $ source ~/.synapse/bin/activate $ ./scripts/hash_password - Password: - Confirm password: + Password: + Confirm password: $2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Then update the `users` table in the database: @@ -614,6 +591,7 @@ Then update the `users` table in the database: UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx' WHERE name='@test:test.com'; + Where's the spec?! ================== @@ -621,6 +599,38 @@ The source of the matrix spec lives at https://github.com/matrix-org/matrix-doc. A recent HTML snapshot of this lives at http://matrix.org/docs/spec +Synapse Development +=================== + +To check out a synapse for development, clone the git repo into a working +directory of your choice:: + + git clone https://github.com/matrix-org/synapse.git + cd synapse + +Synapse has a number of external dependencies, that are easiest +to install using pip and a virtualenv:: + + virtualenv env + source env/bin/activate + python synapse/python_dependencies.py | xargs -n1 pip install + pip install setuptools_trial mock + +This will run a process of downloading and installing all the needed +dependencies into a virtual env. + +Once this is done, you may wish to run Synapse's unit tests, to +check that everything is installed as it should be:: + + python setup.py test + +This should end with a 'PASSED' result:: + + Ran 143 tests in 0.601s + + PASSED (successes=143) + + Building Internal API Documentation =================================== @@ -635,7 +645,6 @@ Building internal API documentation:: python setup.py build_sphinx - Help!! Synapse eats all my RAM! =============================== @@ -650,4 +659,3 @@ matrix.org on. The default setting is currently 0.1, which is probably around a ~700MB footprint. You can dial it down further to 0.02 if desired, which targets roughly ~512MB. Conversely you can dial it up if you need performance for lots of users and have a box with a lot of RAM. -