Signed-off-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <89468146+nico-famedly@users.noreply.github.com>
Co-authored-by: Hubert Chathi <hubert@uhoreg.ca>
And fix a bug in the implementation of the updated redaction
format (MSC2174) where the top-level redacts field was not
properly added for backwards-compatibility.
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
Unix socket support for `federation` and `client` Listeners has existed now for a little while(since [1.81.0](https://github.com/matrix-org/synapse/pull/15353)), but there was one last hold out before it could be complete: HTTP Replication communication. This should finish it up. The Listeners would have always worked, but would have had no way to be talked to/at.
---------
Co-authored-by: Eric Eastwood <madlittlemods@gmail.com>
Co-authored-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Eric Eastwood <erice@element.io>
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
The original code is from @erikjohnston's branches which I've gotten in-shape to merge.
If you leave a room and forget it, then rejoin it, the room would be
missing from the next initial sync.
fixes#13262
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
See https://github.com/matrix-org/synapse/pull/14095#discussion_r990335492
This is useful because when see that a relevant event is an `outlier` or `soft-failed`, then that's a good unexpected indicator explaining why it's not showing up. `filter_events_for_client` is used in `/sync`, `/messages`, `/context` which are all common end-to-end assertion touch points (also notifications, relations).
Implements stable support for MSC3882; this involves updating Synapse's support to
match the MSC / the spec says.
Continue to support the unstable version to allow clients to transition.
The stubs have some issues so this has some generous cast
and ignores in it, but it is better than not having stubs.
Note that confusing that Element is a function which creates
_Element instances (and similarly for Comment).
* Fix#15669: always populate instance map even if it was empty
* Fix some tests
* Fix more tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* CI fix: don't forget to update apt repository sources before installing olddeps deps
* Add test testing the backwards compatibility
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
The cached decorators always return a Deferred, which was not
properly propagated. It was close enough when wrapping coroutines,
but failed if a bare function was wrapped.
This moves the deactivated user check to the method which
all login types call.
Additionally updates the application service tests to be more
realistic by removing invalid tests and fixing server names.
Fix https://github.com/matrix-org/synapse/issues/15618
### Before
```
2023-05-17 22:51:36-0500 [-] 2023-05-17 22:51:36,889 - synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### After
```
2023-05-19 18:16:20-0500 [-] synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### Dev notes
The `Twisted.Logger` controls the `2023-05-19 18:16:20-0500 [-]` prefix, see : [`twisted/twisted` -> `src/twisted/logger/_format.py#L362-L374`](34b161e66b/src/twisted/logger/_format.py (L362-L374))
And we delegate our logs to the Twisted Logger for the tests which puts it in `_trial_temp/test.log`
The event_fields property in filters should use the proper
escape rules, namely backslashes can be escaped with
an additional backslash.
This adds tests (adapted from matrix-js-sdk) and implements
the logic to properly split the event_fields strings.
...to try to control memory usage. `HomeServerConfig`s hold on to
many Jinja2 objects, which come out to over 0.5 MiB per config.
Over the course of a full test run, the cache grows to ~360 entries.
Limit it to 8 entries.
Part of #15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
R30v2 has been out since 2021-07-19 (https://github.com/matrix-org/synapse/pull/10332)
and we started collecting stats on 2021-08-16. Since it's been over a year now
(almost 2 years), this is enough grace period for us to now rip it out.
Synapse will no longer send (or respond to) the unstable flags
for faster joins. These were only available behind a configuration
flag and handled in parallel with the stable flags.
This change fixes two memory leaks during `trial` test runs.
Garbage collection is disabled during each test case and a gen-0 GC is
run at the end of each test. However, when the gen-0 GC is run, the
`TestCase` object usually still holds references to the `HomeServer`
used during the test. As a result, the `HomeServer` gets promoted to
gen-1 and then never garbage collected.
Fix this by periodically running full GCs.
Additionally, fix `HomeServer`s leaking after tests that touch inbound
federation due to `FederationRateLimiter`s adding themselves to a global
set, by turning the set into a `WeakSet`.
Resolves#15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
To track changes in MSC2666:
- The change from `/mutual_rooms/{user_id}` to `/mutual_rooms?user_id={user_id}`.
- The addition of `next_batch_token` (and logic).
- Unstable flag now being `uk.half-shot.msc2666.query_mutual_rooms`.
- The error code when your own user is requested.
There are two situations which were previously not properly checked:
1. If the requested URL was replaced with an oEmbed URL, then the
oEmbed URL was not checked against url_preview_url_blacklist.
2. Follow-up URLs (either via autodiscovery of oEmbed or to pre-cache
images) were not checked against url_preview_url_blacklist.
Fix the following `mypy` errors when running `mypy` with Python 3.7:
```
synapse/storage/controllers/stats.py:58: error: "Counter" is not subscriptable, use "typing.Counter" instead [misc]
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
Part of https://github.com/matrix-org/synapse/issues/15603
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default, https://peps.python.org/pep-0585/#implementation
Fix:
```
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default,
https://peps.python.org/pep-0585/#implementation
MSC3389 proposes protecting the relation type & parent event ID
from redaction. This keeps the relation information intact after
redaction which helps with some UX flaws (e.g. deleting an
event causes it to no longer be in a thread, which is confusing).
* Add master to the instance_map as part of Complement, have ReplicationEndpoint look at instance_map for master.
* Fix typo in drive by.
* Remove unnecessary worker_replication_* bits from unit tests and add master to instance_map(hopefully in the right place)
* Several updates:
1. Switch from master to main for naming the main process in the instance_map. Add useful constants for easier adjustment of names in the future.
2. Add backwards compatibility for worker_replication_* to allow time to transition to new style. Make sure to prioritize declaring main directly on the instance_map.
3. Clean up old comments/commented out code.
4. Adjust unit tests to match with new code.
5. Adjust Complement setup infrastructure to only add main to the instance_map if workers are used and remove now unused options from the worker.yaml template.
* Initial Docs upload
* Changelog
* Missed some commented out code that can go now
* Remove TODO comment that no longer holds true.
* Fix links in docs
* More docs
* Remove debug logging
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Update version to latest, include completeish before/after examples in upgrade notes.
* Fix up and docs too
---------
Co-authored-by: reivilibre <olivier@librepush.net>
Separate out a HTTP client for replication in preparation for
also supporting using UNIX sockets. The major difference from
the base class is that this does not use treq to handle HTTP
requests.
This stops media (and thumbnails) from being accessed from the
listed domains. It does not delete any already locally cached media,
but will prevent accessing it.
Note that admin APIs are unaffected by this change.
MSC3984 proxies /keys/query requests to appservices, but servers will
can also requests devices / keys from the /user/devices endpoint.
The formats are close enough that we can "proxy" that /user/devices to
appservices (by calling /keys/query) and then change the format of the
returned data before returning it over federation.
Behind a configuration flag this adds + to the list of allowed
characters in Matrix IDs. The main feature this enables is
using full E.164 phone numbers as Matrix IDs.
Add an `is_mine_server_name` method, similar to `is_mine_id`.
Ideally we would use this consistently, instead of sometimes comparing
against `hs.hostname` and other times reaching into
`hs.config.server.server_name`.
Also fix a bug in the tests where `hs.hostname` would sometimes differ
from `hs.config.server.server_name`.
Signed-off-by: Sean Quah <seanq@matrix.org>
#15514 introduced a regression where Synapse would encounter
`PartialDownloadError`s when fetching OpenID metadata for certain
providers on startup. Due to #8088, this prevents Synapse from starting
entirely.
Revert the change while we decide what to do about the regression.
Pushers tend to make many connections to the same HTTP host
(e.g. a new event comes in, causes events to be pushed, and then
the homeserver connects to the same host many times). Due to this
the per-host HTTP connection pool size was increased, but this does
not make sense for other SimpleHttpClients.
Add a parameter for the connection pool and override it for pushers
(making a separate SimpleHttpClient for pushers with the increased
configuration).
This returns the HTTP connection pool settings to the default Twisted
ones for non-pusher HTTP clients.
Adds an optional keyword argument to the /relations API which
will recurse a limited number of event relationships.
This will cause the API to return not just the events related to the
parent event, but also events related to those related to the parent
event, etc.
This is disabled by default behind an experimental configuration
flag and is currently implemented using prefixed parameters.
MSC3983 provides a way to request multiple OTKs at once from appservices,
this extends this concept to the Client-Server API.
Note that this will likely be spit out into a separate MSC, but is currently part of
MSC3983.