Backfill events have a negative stream ordering, and so its not useful
to use to compare with other (positive) stream orderings.
Plus, the Rust SDK currently assumes `bump_stamp` is positive.
Introduced in: #17215
This caused us a minor bit of grief as the volume of logs produced was
much higher than normal
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
This is to address an issue in which `m.presence` results on initial
sync are not returning entries of users who are currently offline.
The original behaviour was from
https://github.com/element-hq/synapse/issues/1535
This change is useful for applications that use the
presence system for tracking user profile information/updates (e.g.
https://github.com/element-hq/synapse/pull/16992 or for profile status
messages).
This is gated behind a new configuration option to avoid performance
impact for applications that don't need this, as a pragmatic solution
for now.
As it gets used in sliding sync.
We basically invalidate it in all the same places as
`get_rooms_for_user`. Most of the changes are due to needing the
arguments you pass in to be hashable (which lists aren't)
Prior to this PR, remote downloads which did not provide a
`content-length` were decremented from the remote download ratelimiter
at the max allowable size, leading to excessive ratelimiting - see
https://github.com/element-hq/synapse/issues/17394.
This PR adds a linearizer to limit concurrent remote downloads to 6 per
IP address, and decrements remote downloads without a `content-length`
from the ratelimiter *after* the download is complete and the response
length is known.
Also adds logic to ensure that responses with a known length respect the
`max_download_size`.
This removes the `enable_media_repo` attribute on the server config in
favour of always using the `can_load_media_repo` in the media config.
This should avoid issues like in #17420 in the future
Add room subscriptions to Sliding Sync `/sync`
Based on
[MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575):
Sliding Sync
Currently, you can only subscribe to rooms you have had *any* membership
in before.
In the future, we will allow `world_readable` rooms to be subscribed to
without joining.
We can only fetch room types for rooms the server is in, so we need to
only filter rooms that we're joined to.
Also includes a perf fix to bulk fetch room types.
This looks like a copy/paste error: the function doesn't reject
anything, but instead allows the action count to go through regardless.
The remainder of the function's documentation appears correct.
Added RHEL/Rocky install instructions (PyPI). Instructions cover
versions 8 and 9 which are the only supported ones - except for RHEL7
which is now on extended life cycle support phase.
Large part of the guide is for installing Python 3.11 or 3.12. RHEL8
ships with Python 3.6 and RHEL9 ships with 3.9. Newer Python versions
can be installed easily as they don't interfere with OS software that
still relies on the default Python version.
I was first planning to add prerequisites part to the prerequisites
section and then install instructions on the top of the page but that
section is for pre-built packages so it just didn't sound right. So I
just dumped everything to the PyPI section of the page. But suggestions
to change are welcome.
I also didn't combine these with Fedora section. I haven't tested those
packages on RHEL and Fedora ships with Python 3.12 out-of-box.
We don't necessarily have `instance_name` for old events (before we
support multiple event persisters). We treat those as if the
`instance_name` was "master".
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
`bump_stamp` corresponds to the `stream_ordering` of the latest `DEFAULT_BUMP_EVENT_TYPES` in the room. This helps clients sort more readily without them needing to pull in a bunch of the timeline to determine the last activity. `bump_event_types` is a thing because for example, we don't want display name changes to mark the room as unread and bump it to the top. For encrypted rooms, we just have to consider any activity as a bump because we can't see the content and the client has to figure it out for themselves.
Outside of Synapse, `bump_stamp` is just a free-form counter so other implementations could use `received_ts`or `origin_server_ts` (see the [*Security considerations* section in MSC3575 about the potential pitfalls of using `origin_server_ts`](https://github.com/matrix-org/matrix-spec-proposals/blob/kegan/sync-v3/proposals/3575-sync.md#security-considerations)). It doesn't have any guarantee about always going up. In the Synapse case, it could go down if an event was redacted/removed (or purged in cases of retention policies).
In the future, we could add `bump_event_types` as [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575) mentions if people need to customize the event types.
---
In the Sliding Sync proxy, a similar [`timestamp` field was added](https://github.com/matrix-org/sliding-sync/pull/247) for the same purpose but the name is not obvious what it pertains to or what it's for.
The `timestamp` field was also added to Ruma in https://github.com/ruma/ruma/pull/1622
Follows on from @H-Shay's great work at
https://github.com/matrix-org/synapse/pull/15344 and MSC4026.
Also enables its use for MSC3881, mainly as an easy but concrete example
of how to use it.
This can help ensure that the rooms are eventually purged if the other
local users also forget them. Synapse already clears some of the room
information as part of the `_background_remove_left_rooms` background
task, but this doesn't catch `events`, `event_json`, etc.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
If we leave the `.so` in place it causes the tests to fail, as it gets
picked up (instead of the newly built .so) and so fails with mismatched
GLIBC errors.
Sid now defaults to python3.12, and our pinned version of cffi (1.5.1)
does not have wheels for 3.12. This installing cffi to fail as we did
not have the correct libs installed to build from source.
Fix bug where we don't get new to-device from remote if they resent a
message we've already persisted and have recorded in the DB twice.
`device_federation_inbox` table doesn't have a unique index, and so we
can race and store an entry in there twice. If we do so then
`simple_select_one_txn` will throw an error due to the query returning
more than one row. We should add an unique index, but it doesn't really
matter so lets just handle the case of multiple rows correctly for now.
Fixes up #17333, where we failed to actually send less data (the
`DISTINCT` didn't work due to `stream_id` being different).
We fix this by making it so that every device list outbound poke for a
given user ID has the same stream ID. We can't change the query to only
return e.g. max stream ID as the receivers look up the destinations to
send to by doing `SELECT WHERE stream_id = ?`
A simple change to update the docs where default values were missing.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Kim Brose <2803622+HarHarLinks@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This is #17291 (which got reverted), with some added fixups, and change
so that tests actually pick up the error.
The problem was that we were not calculating any new chain IDs due to a
missing `not` in a condition.
Reduce the replication traffic of device lists, by not sending every
destination that needs to be sent the device list update over
replication. Instead a "hosts to send to have been calculated"
notification over replication, and then federation senders read the
destinations from the DB.
For non federation senders this should heavily reduce the impact of a
user in many large rooms changing a device.
The parse_integer function was previously made to reject negative values by
default in https://github.com/element-hq/synapse/pull/16920, but the
documentation stated otherwise. This fixes the documentation and also:
- Removes explicit negative=False parameters from call sites.
- Brings the negative default of parse_integer_from_args in alignment with
parse_integer.
This reverts commit bdf82efea5 (#17291)
This seems to have stopped persisting auth chains for new events, and so
is causing state res to fall back to the slow methods
We calculate the auth chain links outside of the main persist event
transaction to ensure that we do not block other event sending during
the calculation.
Sort is no longer configurable and we always sort rooms by the `stream_ordering` of the last event in the room or the point where the user can see up to in cases of leave/ban/invite/knock.
Add `event.internal_metadata.instance_name` (the worker instance that persisted the event) to go alongside the existing `event.internal_metadata.stream_ordering`.
`instance_name` is useful to properly compare and query for events with a token since you need to compare both the `stream_ordering` and `instance_name` against the vector clock/`instance_map` in the `RoomStreamToken`.
This is pre-requisite work and may be used in https://github.com/element-hq/synapse/pull/17293
Adding `event.internal_metadata.instance_name` was first mentioned in the initial Sliding Sync PR while pairing with @erikjohnston, see 09609cb0db (diff-5cd773fb307aa754bd3948871ba118b1ef0303f4d72d42a2d21e38242bf4e096R405-R410)
PR where this was introduced: https://github.com/matrix-org/synapse/pull/14817
### What does this affect?
`get_last_event_in_room_before_stream_ordering(...)` is used in Sync v2 in a lot of different state calculations.
`get_last_event_in_room_before_stream_ordering(...)` is also used in `/rooms/{roomId}/members`
https://github.com/matrix-org/matrix-spec-proposals/pull/4151
This is intended to be enabled by default for immediate use. When FCP is
complete, the unstable endpoint will be dropped and stable endpoint
supported instead - no backwards compatibility is expected for the
unstable endpoint.
Spawning from https://github.com/element-hq/synapse/pull/17187#discussion_r1619492779 around wanting to put `SlidingSyncBody` (parse the request in the rest layer), `SlidingSyncConfig` (from the rest layer, pass to the handler), `SlidingSyncResponse` (pass the response from the handler back to the rest layer to respond) somewhere that doesn't contaminate the imports and cause circular import issues.
- Moved Pydantic parsing models to `synapse/types/rest`
- Moved handler types to `synapse/types/handlers`
Fixes: #17013
Add logging for whether room keys are replaced
This is motivated by the Crypto team who need to diagnose crypto issues.
The existing opentracing logging is not enough because it is not enabled
for all users.
Based on [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575): Sliding Sync
This iteration only focuses on returning the list of room IDs in the sliding window API (without sorting/filtering).
Rooms appear in the Sliding sync response based on:
- `invite`, `join`, `knock`, `ban` membership events
- Kicks (`leave` membership events where `sender` is different from the `user_id`/`state_key`)
- `newly_left` (rooms that were left during the given token range, > `from_token` and <= `to_token`)
- In order for bans/kicks to not show up, you need to `/forget` those rooms. This doesn't modify the event itself though and only adds the `forgotten` flag to `room_memberships` in Synapse. There isn't a way to tell when a room was forgotten at the moment so we can't factor it into the from/to range.
### Example request
`POST http://localhost:8008/_matrix/client/unstable/org.matrix.msc3575/sync`
```json
{
"lists": {
"foo-list": {
"ranges": [ [0, 99] ],
"sort": [ "by_notification_level", "by_recency", "by_name" ],
"required_state": [
["m.room.join_rules", ""],
["m.room.history_visibility", ""],
["m.space.child", "*"]
],
"timeline_limit": 100
}
}
}
```
Response:
```json
{
"next_pos": "s58_224_0_13_10_1_1_16_0_1",
"lists": {
"foo-list": {
"count": 1,
"ops": [
{
"op": "SYNC",
"range": [0, 99],
"room_ids": [
"!MmgikIyFzsuvtnbvVG:my.synapse.linux.server"
]
}
]
}
},
"rooms": {},
"extensions": {}
}
```
Use fully-qualified `PersistedEventPosition` (`instance_name` and `stream_ordering`) when returning `RoomsForUser` to facilitate proper comparisons and `RoomStreamToken` generation.
Spawning from https://github.com/element-hq/synapse/pull/17187 where we want to utilize this change
Otherwise things will get confused.
An alternative would be to make sure that for lagging stream we don't
return anything (and make sure the returned next_batch token doesn't go
backwards). But that is a faff.
We try and deduplicate in two places: 1) really early on, and 2) just
before we persist the event. The first case was broken due to it
occuring before the profile information was added, and so it thought the
event contents were different.
The second case did catch it and handle it correctly, however doing so
creates a redundant state group leading to bloat.
Fixes#3791
Fixes up #17239
We need to keep the spam check within the `try/except` block. Also makes
it so that we don't enter the top span twice.
Also also ensures that we get the right thumbnail length.
There is a problem with `StreamIdGenerator` where it can go backwards
over restarts when a stream ID is requested but then not inserted into
the DB. This is problematic if we want to land #17215, and is generally
a potential cause for all sorts of nastiness.
Instead of trying to fix `StreamIdGenerator`, we may as well move to
`MultiWriterIdGenerator` that does not suffer from this problem (the
latest positions are stored in `stream_positions` table). This involves
adding SQLite support to the class.
This only changes id generators that were already using
`MultiWriterIdGenerator` under postgres, a separate PR will move the
rest of the uses of `StreamIdGenerator` over.
Currently sending a to-device message to a user ID with a dodgy
destination is accepted, but then ends up spamming the logs when we try
and send to the destination.
An alternative would be to reject the request, but I'm slightly nervous
that could break things.
When a module rejects a piece of media we end up trying to close the
same logging context twice.
Instead of fixing the existing code we refactor to use an async context
manager, which is easier to write correctly.
The log format is the same as the request log format, except:
- fields that are specific to HTTP requests have been removed
- the task's params are included at the end of the log line.
These log lines are emitted:
- when the task function finishes — both completion and failure (and I
suppose it is possible for a task to become schedulable again?)
- every 5 minutes whilst it is running
Closes#17217.
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
This PR ports the logic from the
[synapse_auto_accept_invite](https://github.com/matrix-org/synapse-auto-accept-invite)
module into synapse.
I went with the naive approach of injecting the "module" next to where
third party modules are currently loaded. If there is a better/preferred
way to handle this, I'm all ears. It wasn't obvious to me if there was a
better location to add this logic that would cleanly apply to all
incoming invite events.
Relies on https://github.com/element-hq/synapse/pull/17166 to fix linter
errors.
Re-introduces #17191, and includes #17197 and #17214
The basic idea is to stop calling `get_rooms_for_user` everywhere, and
instead use the table `device_lists_changes_in_room`.
Commits reviewable one-by-one.
Removed `request_key` from the `SyncConfig` (moved outside as its own function parameter) so it doesn't have to flow into `_generate_sync_entry_for_xxx` methods. This way we can separate the concerns of caching from generating the response and reuse the `_generate_sync_entry_for_xxx` functions as we see fit. Plus caching doesn't really have anything to do with the config of sync.
Split from https://github.com/element-hq/synapse/pull/17167
Spawning from https://github.com/element-hq/synapse/pull/17167#discussion_r1601497279
It's almost always more efficient to query the rooms that have device
list changes, rather than looking at the list of all users whose devices
have changed and then look for shared rooms.
This is to allow clients to query the configured federation whitelist.
Disabled by default.
---------
Co-authored-by: Devon Hudson <devonhudson@librem.one>
Co-authored-by: devonh <devon.dmytro@gmail.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Linter errors are showing up in #17147 that are unrelated to that PR.
The errors do not currently show up on develop.
This PR aims to resolve the linter errors separately from #17147.
This version change requires a migration to a new API. See
https://pyo3.rs/v0.21.2/migration#from-020-to-021
This will fix the annoying warnings added when using the recent rust
nightly:
> warning: non-local `impl` definition, they should be avoided as they
go against expectation
When there have been lots of changes compared with the number of
entities, we can do a fast(er) path.
Locally I ran some benchmarking, and the comparison seems to give the
best determination of which method we use.
This change will apply the `email` & `picture` provided by OIDC to the
new user account when registering a new user via OIDC. If the user is
directed to the account details form, this change makes sure they have
been selected before applying them, otherwise they are omitted. In
particular, this change ensures the values are carried through when
Synapse has consent configured, and the redirect to the consent form/s
are followed.
I have tested everything manually. Including:
- with/without consent configured
- allowing/not allowing the use of email/avatar (via
`sso_auth_account_details.html`)
- with/without automatic account detail population (by un/commenting the
`localpart_template` option in synapse config).
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
... when workers are unreachable, etc.
Fixes https://github.com/element-hq/synapse/issues/17117.
The general principle is just to make sure that we propagate any
exceptions to the JsonResource, so that we return an error code to the
sending server. That means that the sending server no longer considers
the message safely sent, so it will retry later.
In the issue, Erik mentions that an alternative solution would be to
persist the to-device messages into a table so that they can be retried.
This might be an improvement for performance, but even if we did that,
we still need this mechanism, since we might be unable to reach the
database. So, if we want to do that, it can be a later follow-up.
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
This makes it easy to store UNIX sockets with correct permissions. Those
would be located in /run/synapse which is the directory used in many
examples in Synapse configuration manual. Additionally, the directory
and sockets are deleted when Synapse is shut down.
