diff --git a/rst/examples.rst b/rst/examples.rst index 37a206a81ee..a02f4b9581e 100644 --- a/rst/examples.rst +++ b/rst/examples.rst @@ -1,8 +1,10 @@ Command Line ============ -The following examples show how to use `/usr/bin/ansible` for running ad-hoc tasks. -Start here. +.. highlight:: bash + +The following examples show how to use `/usr/bin/ansible` for running +ad hoc tasks. Start here. For configuration management and deployments, you'll want to pick up on using `/usr/bin/ansible-playbook` -- the concepts port over directly. @@ -14,53 +16,65 @@ Parallelism and Shell Commands Let's use ansible's command line tool to reboot all web servers in Atlanta, 10 at a time. First, let's set up SSH-agent so it can remember our credentials:: - ssh-agent bash - ssh-add ~/.ssh/id_rsa.pub + $ ssh-agent bash + $ ssh-add ~/.ssh/id_rsa.pub -If you don't want to use ssh-agent and want to instead SSH with a password instead of keys, you can with ---ask-pass (-k), but it's much better to just use ssh-agent. +If you don't want to use ssh-agent and want to instead SSH with a +password instead of keys, you can with ``--ask-pass`` (``-k``), but +it's much better to just use ssh-agent. -Now to run the command on all servers in a group, in this case, 'atlanta', in 10 parallel forks:: +Now to run the command on all servers in a group, in this case, +*atlanta*, in 10 parallel forks:: - ansible atlanta -a "/sbin/reboot" -f 10 + $ ansible atlanta -a "/sbin/reboot" -f 10 If you want to run commands as a different user than root, it looks like this:: - ansible atlanta -a "/usr/bin/foo" -u yourname + $ ansible atlanta -a "/usr/bin/foo" -u yourname If you want to run commands through sudo:: - - ansible atlanta -a "/usr/bin/foo" -u yourname --sudo [--ask-sudo-pass] -Use --ask-sudo-pass (-K) if you are not using passwordless sudo. This will interactively prompt -you for the password to use. Use of passwordless sudo makes things easier to automate, but it's -not required. + $ ansible atlanta -a "/usr/bin/foo" -u yourname --sudo [--ask-sudo-pass] -It is also possible to sudo to a user other than root using --sudo-user (-U):: +Use ``--ask-sudo-pass`` (``-K``) if you are not using passwordless +sudo. This will interactively prompt you for the password to use. +Use of passwordless sudo makes things easier to automate, but it's not +required. - ansible atlanta -a "/usr/bin/foo" -u yourname -U otheruser [--ask-sudo-pass] +It is also possible to sudo to a user other than root using +``--sudo-user`` (``-U``):: + + $ ansible atlanta -a "/usr/bin/foo" -u yourname -U otheruser [--ask-sudo-pass] Ok, so those are basics. If you didn't read about patterns and groups yet, go back and read :doc:`patterns`. -The -f 10 in the above specifies the usage of 10 simultaneous processes. Normally commands also take -a `-m` for module name, but the default module name is 'command', so we didn't need to specify that -all of the time. We'll use `-m` in later examples to run some other :doc:`modules`. +The ``-f 10`` in the above specifies the usage of 10 simultaneous +processes. Normally commands also take a ``-m`` for module name, but +the default module name is :ref:`command`, so we didn't need to +specify that all of the time. We'll use ``-m`` in later examples to +run some other :doc:`modules`. -Note that the command module requires absolute paths and does not support shell variables. If we want to -execute a module using the shell, we can do those things, and also use pipe and redirection operators. -Read more about the differences on the :doc:`modules` page. The shell -module looks like this:: +.. note:: + The :ref:`command` module requires absolute paths and does not + support shell variables. If we want to execute a module using a + shell, we can do those things, and also use pipe and redirection + operators. Read more about the differences on the :doc:`modules` + page. - ansible raleigh -m shell -a 'echo $TERM' +Using the :ref:`shell` module looks like this:: -When running any command with the ansible "ad hoc" CLI (as opposed to playbooks), pay particular attention -to shell quoting rules, so the shell doesn't eat a variable before it gets passed to Ansible. For example, -using double vs single quotes in the above example would evaluate the variable on the box you were on. + $ ansible raleigh -m shell -a 'echo $TERM' -So far we've been demoing simple command execution, but most ansible modules usually do not work like -simple scripts. They make the remote system look like you state, and run the commands necessary to -get it there. This is commonly referred to as 'idempotence', and is a core design goal of ansible. -However, we also recognize that running ad-hoc commands is equally important, so Ansible easily supports both. +When running any command with the ansible *ad hoc* CLI (as opposed to +:doc:`playbooks`), pay particular attention to shell quoting rules, so +the shell doesn't eat a variable before it gets passed to Ansible. +For example, using double vs single quotes in the above example would +evaluate the variable on the box you were on. + +So far we've been demoing simple command execution, but most Ansible modules usually do not work like +simple scripts. They make the remote system look like you state, and run the commands necessary to +get it there. This is commonly referred to as 'idempotence', and is a core design goal of ansible. +However, we also recognize that running *ad hoc* commands is equally important, so Ansible easily supports both. File Transfer & Templating @@ -73,26 +87,28 @@ optionally use them as template sources. To transfer a file directly to many different servers:: - ansible atlanta -m copy -a "src=/etc/hosts dest=/tmp/hosts" + $ ansible atlanta -m copy -a "src=/etc/hosts dest=/tmp/hosts" To use templating, first run the setup module to put the template variables you would like to use on the remote host. Then use the -template module to write the files using those templates. +template module to write the files using those templates. -Templates are written in `Jinja2 `_ format. -Playbooks (covered elsewhere in the -documentation) will run the setup module for you, making this even -simpler:: +Templates are written in `Jinja2 `_ +format. :doc:`playbooks` will run the setup module for you, making +this even simpler:: - ansible webservers -m setup -a "favcolor=red ntp_server=192.168.1.1" - ansible webservers -m template -a "src=/srv/motd.j2 dest=/etc/motd" - ansible webservers -m template -a "src=/srv/ntp.j2 dest=/etc/ntp.conf" + $ ansible webservers -m setup -a "favcolor=red ntp_server=192.168.1.1" + $ ansible webservers -m template -a "src=/srv/motd.j2 dest=/etc/motd" + $ ansible webservers -m template -a "src=/srv/ntp.j2 dest=/etc/ntp.conf" -Ansible variables are used in templates by using the name surrounded by double -curly-braces. Ansible provides some 'facts' about the system being managed -automatically in playbooks or when the setup module is run manually. If facter or ohai -were installed on the remote machine, variables -from those programs can be accessed too, using the appropriate prefix:: +Ansible variables are used in templates by using the name surrounded +by double curly-braces. Ansible provides some *facts* about the +system being managed automatically in playbooks or when the setup +module is run manually. If facter or ohai were installed on the +remote machine, variables from those programs can be accessed too, +using the appropriate prefix: + +.. code-block:: django This is an Ansible variable: {{ favcolor }} This is an Ansible fact: {{ ansible_hostname }} @@ -103,19 +119,19 @@ Using the Ansible facts is generally preferred as that way you can avoid a depen on ruby. If you want to use facter instead, you will also need rubygem-json because the facter packages may forget this as a dependency. -The `file` module allows changing ownership and permissions on files. These -same options can be passed directly to the `copy` or `template` modules as well:: +The ``file`` module allows changing ownership and permissions on files. These +same options can be passed directly to the ``copy`` or ``template`` modules as well:: - ansible webservers -m file -a "dest=/srv/foo/a.txt mode=600" - ansible webservers -m file -a "dest=/srv/foo/b.txt mode=600 owner=mdehaan group=mdehaan" + $ ansible webservers -m file -a "dest=/srv/foo/a.txt mode=600" + $ ansible webservers -m file -a "dest=/srv/foo/b.txt mode=600 owner=mdehaan group=mdehaan" -The `file` module can also create directories, similar to `mkdir -p`:: - - ansible webservers -m file -a "dest=/path/to/c mode=644 owner=mdehaan group=mdehaan state=directory" +The ``file`` module can also create directories, similar to ``mkdir -p``:: + + $ ansible webservers -m file -a "dest=/path/to/c mode=644 owner=mdehaan group=mdehaan state=directory" As well as delete directories (recursively) and delete files:: - - ansible webservers -m file -a "dest=/path/to/c state=absent" + + $ ansible webservers -m file -a "dest=/path/to/c state=absent" The mode, owner, and group arguments can also be used on the copy or template lines. @@ -123,23 +139,24 @@ The mode, owner, and group arguments can also be used on the copy or template li Managing Packages ````````````````` -There are modules available for yum and apt. Here are some examples with yum. +There are modules available for yum and apt. Here are some examples +with :ref:`yum`. Ensure a package is installed, but don't update it:: - - ansible webservers -m yum -a "pkg=acme state=installed" + + $ ansible webservers -m yum -a "pkg=acme state=installed" Ensure a package is installed to a specific version:: - ansible webservers -m yum -a "pkg=acme-1.5 state=installed" + $ ansible webservers -m yum -a "pkg=acme-1.5 state=installed" Ensure a package is at the latest version:: - ansible webservers -m yum -a "pkg=acme state=latest" + $ ansible webservers -m yum -a "pkg=acme state=latest" Ensure a package is not installed:: - - ansible webservers -m yum -a "pkg=acme state=removed" + + $ ansible webservers -m yum -a "pkg=acme state=removed" Currently Ansible only has modules for managing packages with yum and apt. You can install for other packages for now using the command module or (better!) contribute a module @@ -148,12 +165,13 @@ for other package managers. Stop by the mailing list for info/details. Users and Groups ```````````````` -The user module allows easy creation and manipulation of existing user accounts, as well -as removal of user accounts that may exist:: +The :ref:`user` module allows easy creation and manipulation of +existing user accounts, as well as removal of user accounts that may +exist:: - ansible all -m user -a "name=foo password=" + $ ansible all -m user -a "name=foo password=" - ansible all -m user -a "name=foo state=absent" + $ ansible all -m user -a "name=foo state=absent" See the :doc:`modules` section for details on all of the available options, including how to manipulate groups and group membership. @@ -163,27 +181,27 @@ Deploying From Source Control Deploy your webapp straight from git:: - ansible webservers -m git -a "repo=git://foo.example.org/repo.git dest=/srv/myapp version=HEAD" + $ ansible webservers -m git -a "repo=git://foo.example.org/repo.git dest=/srv/myapp version=HEAD" -Since ansible modules can notify change handlers (see -:doc:`playbooks`) it is possible to tell ansible to run specific tasks -when the code is updated, such as deploying Perl/Python/PHP/Ruby -directly from git and then restarting apache. +Since ansible modules can notify change handlers it is possible to +tell ansible to run specific tasks when the code is updated, such as +deploying Perl/Python/PHP/Ruby directly from git and then restarting +apache. Managing Services ````````````````` Ensure a service is started on all webservers:: - ansible webservers -m service -a "name=httpd state=started" + $ ansible webservers -m service -a "name=httpd state=started" Alternatively, restart a service on all webservers:: - ansible webservers -m service -a "name=httpd state=restarted" + $ ansible webservers -m service -a "name=httpd state=restarted" Ensure a service is stopped:: - ansible webservers -m service -a "name=httpd state=stopped" + $ ansible webservers -m service -a "name=httpd state=stopped" Time Limited Background Operations `````````````````````````````````` @@ -193,25 +211,26 @@ checked on later. The same job ID is given to the same task on all hosts, so you won't lose track. If you kick hosts and don't want to poll, it looks like this:: - ansible all -B 3600 -a "/usr/bin/long_running_operation --do-stuff" + $ ansible all -B 3600 -a "/usr/bin/long_running_operation --do-stuff" If you do decide you want to check on the job status later, you can:: - ansible all -m async_status -a "jid=123456789" + $ ansible all -m async_status -a "jid=123456789" Polling is built-in and looks like this:: - - ansible all -B 3600 -P 60 -a "/usr/bin/long_running_operation --do-stuff" -The above example says "run for 60 minutes max (60*60=3600), poll for status every 60 seconds". + $ ansible all -B 1800 -P 60 -a "/usr/bin/long_running_operation --do-stuff" + +The above example says "run for 30 minutes max (``-B``: 30*60=1800), +poll for status (``-P``) every 60 seconds". Poll mode is smart so all jobs will be started before polling will begin on any machine. -Be sure to use a high enough `--forks` value if you want to get all of your jobs started +Be sure to use a high enough ``--forks`` value if you want to get all of your jobs started very quickly. After the time limit (in seconds) runs out (``-B``), the process on the remote nodes will be terminated. -Any module other than `copy` or `template` can be -backgrounded. Typically you'll be backgrounding long-running +Any module other than ``copy`` or ``template`` can be +backgrounded. Typically you'll be backgrounding long-running shell commands or software upgrades only. :doc:`playbooks` also support polling, and have a simplified syntax for this. @@ -221,11 +240,7 @@ a simplified syntax for this. A list of available modules :doc:`playbooks` Using ansible for configuration management & deployment - `Mailing List `_ + `Mailing List `_ Questions? Help? Ideas? Stop by the list on Google Groups `irc.freenode.net `_ #ansible IRC chat channel - - - -