Fixed typo from adress to address (#52143)

Signed-off-by: Amol Kahat <akahat@redhat.com>

lib/ansible/module_utils/facts/network/linux.py

@@ -220,7 +220,7 @@ class LinuxNetwork(Network):
                             default_ipv4['broadcast'] = broadcast
                             default_ipv4['netmask'] = netmask
                             default_ipv4['network'] = network
-                            # NOTE: macadress is ref from outside scope
+                            # NOTE: macaddress is ref from outside scope
                             default_ipv4['macaddress'] = macaddress
                             default_ipv4['mtu'] = interfaces[device]['mtu']
                             default_ipv4['type'] = interfaces[device].get("type", "unknown")

lib/ansible/modules/cloud/ovh/ovh_ip_failover.py

@@ -80,7 +80,7 @@ options:
 '''
 
 EXAMPLES = '''
-# Route an IP adress 1.1.1.1 to the service ns666.ovh.net
+# Route an IP address 1.1.1.1 to the service ns666.ovh.net
 - ovh_ip_failover:
     name: 1.1.1.1
     service: ns666.ovh.net

lib/ansible/modules/cloud/vmware/_vsphere_guest.py

@@ -236,7 +236,7 @@ EXAMPLES = '''
 
 ---
 # Typical output of a vsphere_facts run on a guest
-# If vmware tools is not installed, ipadresses with return None
+# If vmware tools is not installed, ipaddresses with return None
 
 - hw_eth0:
   - addresstype: "assigned"

lib/ansible/modules/network/fortios/fortios_address.py

@@ -97,7 +97,7 @@ EXAMPLES = """
 
 RETURN = """
 firewall_address_config:
-  description: full firewall adresses config string.
+  description: full firewall addresses config string.
   returned: always
   type: str
 change_string:

lib/ansible/modules/network/fortios/fortios_antivirus_heuristic.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_antivirus_profile.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_antivirus_quarantine.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_antivirus_settings.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_application_custom.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_application_group.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_application_list.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_application_name.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_application_rule_settings.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_authentication_rule.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_authentication_scheme.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_authentication_setting.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dlp_filepattern.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dlp_fp_doc_source.py

@@ -46,7 +46,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dlp_fp_sensitivity.py

@@ -46,7 +46,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dlp_sensor.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dlp_settings.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dnsfilter_domain_filter.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_dnsfilter_profile.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_endpoint_control_client.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_endpoint_control_forticlient_ems.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_endpoint_control_forticlient_registration_sync.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_endpoint_control_profile.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_endpoint_control_settings.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_extender_controller_extender.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_DoS_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_DoS_policy6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_address.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_address6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_address6_template.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_addrgrp.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_addrgrp6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_auth_portal.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_central_snat_map.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_dnstranslation.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_identity_based_route.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_interface_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_interface_policy6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_internet_service.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_internet_service_custom.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_internet_service_group.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ip_translation.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ipmacbinding_setting.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ipmacbinding_table.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ippool.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ippool6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ipv6_eh_filter.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_ldb_monitor.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_local_in_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_local_in_policy6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_multicast_address.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_multicast_address6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_multicast_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_multicast_policy6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_policy46.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_policy6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_policy64.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_profile_group.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_profile_protocol_options.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_proxy_address.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_proxy_addrgrp.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_proxy_policy.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vip.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vip46.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vip6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vip64.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vipgrp.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vipgrp46.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vipgrp6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_firewall_vipgrp64.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_ips_sensor.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_system_central_management.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_system_sdn_connector.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter.py

@@ -33,7 +33,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_content.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_content_header.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_fortiguard.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_ftgd_local_cat.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_ftgd_local_rating.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_ips_urlfilter_cache_setting.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_ips_urlfilter_setting.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_ips_urlfilter_setting6.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_override.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_profile.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_search_engine.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/network/fortios/fortios_webfilter_urlfilter.py

@@ -45,7 +45,7 @@ requirements:
 options:
     host:
        description:
-            - FortiOS or FortiGate ip adress.
+            - FortiOS or FortiGate ip address.
        required: true
     username:
         description:

lib/ansible/modules/web_infrastructure/sophos_utm/utm_dns_host.py

@@ -104,7 +104,7 @@ result:
             description: The ipv4 address of the object
             type: str
         address6:
-            description: The ipv6 adress of the object
+            description: The ipv6 address of the object
             type: str
         comment:
             description: The comment string

test/integration/targets/cnos_backup/cnos_backup_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_backup_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_backup_sample]

test/integration/targets/cnos_banner/cnos_banner_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_banner_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_banner_sample]

test/integration/targets/cnos_bgp/cnos_bgp_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_bgp_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_bgp_sample]

test/integration/targets/cnos_command/cnos_command_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_command_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_command]

test/integration/targets/cnos_conditional_command/cnos_conditional_command_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_conditional_command_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_conditional_command_sample]

test/integration/targets/cnos_conditional_template/cnos_conditional_template_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_conditional_template_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_conditional_template_sample]

test/integration/targets/cnos_config/cnos_config_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_command_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_config]

test/integration/targets/cnos_facts/cnos_facts_sample_hosts

@@ -3,11 +3,11 @@
 #    - Comments begin with the '#' character
 #    - Blank lines are ignored
 #    - Groups of hosts are delimited by [header] elements
-#    - You can enter hostnames or ip addresses
+#    - You can enter hostnames or ip Addresses
 #    - A hostname/ip can be a member of multiple groups
 #
 # In the /etc/ansible/hosts file u have to enter [cnos_facts_sample] tag
-# Following you should specify IP Adresses details 
+# Following you should specify IP Addresses details 
 # Please change <username> and <password> with appropriate value for your switch.
 
 [cnos_facts]