Merge pull request #4599 from skg-net/devel

Added Command and Config modules to support Dell Networking OS10 device

network/dnos10/dnos10_command.py

@@ -0,0 +1,209 @@
+#!/usr/bin/python
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+DOCUMENTATION = """
+---
+module: dnos10_command
+version_added: "2.2"
+author: "Senthil Kumar Ganesan (@skg_net)"
+short_description: Run commands on remote devices running Dell OS10
+description:
+  - Sends arbitrary commands to a Dell OS10 node and returns the results
+    read from the device. This module includes an
+    argument that will cause the module to wait for a specific condition
+    before returning or timing out if the condition is not met.
+  - This module does not support running commands in configuration mode.
+    Please use M(dnos10_config) to configure Dell OS10 devices.
+extends_documentation_fragment: dnos10
+options:
+  commands:
+    description:
+      - List of commands to send to the remote dnos10 device over the
+        configured provider. The resulting output from the command
+        is returned. If the I(wait_for) argument is provided, the
+        module is not returned until the condition is satisfied or
+        the number of retries has expired.
+    required: true
+  wait_for:
+    description:
+      - List of conditions to evaluate against the output of the
+        command. The task will wait for each condition to be true
+        before moving forward. If the conditional is not true
+        within the configured number of I(retries), the task fails.
+        See examples.
+    required: false
+    default: null
+  retries:
+    description:
+      - Specifies the number of retries a command should by tried
+        before it is considered failed. The command is run on the
+        target device every retry and evaluated against the
+        I(wait_for) conditions.
+    required: false
+    default: 10
+  interval:
+    description:
+      - Configures the interval in seconds to wait between retries
+        of the command. If the command does not pass the specified
+        conditions, the interval indicates how long to wait before
+        trying the command again.
+    required: false
+    default: 1
+"""
+
+EXAMPLES = """
+# Note: examples below use the following provider dict to handle
+#       transport and authentication to the node.
+vars:
+  cli:
+    host: "{{ inventory_hostname }}"
+    username: admin
+    password: admin
+    transport: cli
+
+tasks:
+  - name: run show version on remote devices
+    dnos10_command:
+      commands: show version
+      provider "{{ cli }}"
+
+  - name: run show version and check to see if output contains OS10
+    dnos10_command:
+      commands: show version
+      wait_for: result[0] contains OS10
+      provider "{{ cli }}"
+
+  - name: run multiple commands on remote nodes
+     dnos10_command:
+      commands:
+        - show version
+        - show interface
+      provider "{{ cli }}"
+
+  - name: run multiple commands and evaluate the output
+    dnos10_command:
+      commands:
+        - show version
+        - show interface
+      wait_for:
+        - result[0] contains OS10
+        - result[1] contains Ethernet
+      provider: "{{ cli }}"
+"""
+
+RETURN = """
+stdout:
+  description: The set of responses from the commands
+  returned: always
+  type: list
+  sample: ['...', '...']
+
+stdout_lines:
+  description: The value of stdout split into a list
+  returned: always
+  type: list
+  sample: [['...', '...'], ['...'], ['...']]
+
+failed_conditions:
+  description: The list of conditionals that have failed
+  returned: failed
+  type: list
+  sample: ['...', '...']
+
+warnings:
+  description: The list of warnings (if any) generated by module based on arguments
+  returned: always
+  type: list
+  sample: ['...', '...']
+"""
+
+from ansible.module_utils.basic import get_exception
+from ansible.module_utils.netcli import CommandRunner, FailedConditionsError
+from ansible.module_utils.network import NetworkModule, NetworkError
+import ansible.module_utils.dnos10
+
+def to_lines(stdout):
+    for item in stdout:
+        if isinstance(item, basestring):
+            item = str(item).split('\n')
+        yield item
+
+def main():
+    spec = dict(
+        commands=dict(type='list', required=True),
+        wait_for=dict(type='list'),
+        retries=dict(default=10, type='int'),
+        interval=dict(default=1, type='int')
+    )
+
+    module = NetworkModule(argument_spec=spec,
+                           connect_on_load=False,
+                           supports_check_mode=True)
+
+    commands = module.params['commands']
+    conditionals = module.params['wait_for'] or list()
+
+    warnings = list()
+
+    runner = CommandRunner(module)
+
+    for cmd in commands:
+        if module.check_mode and not cmd.startswith('show'):
+            warnings.append('only show commands are supported when using '
+                            'check mode, not executing `%s`' % cmd)
+        else:
+            if cmd.startswith('conf'):
+                module.fail_json(msg='dnos10_command does not support running '
+                                     'config mode commands.  Please use '
+                                     'dnos10_config instead')
+            runner.add_command(cmd)
+
+    for item in conditionals:
+        runner.add_conditional(item)
+
+    runner.retries = module.params['retries']
+    runner.interval = module.params['interval']
+
+    try:
+        runner.run()
+    except FailedConditionsError:
+        exc = get_exception()
+        module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
+    except NetworkError:
+        exc = get_exception()
+        module.fail_json(msg=str(exc))
+
+    result = dict(changed=False)
+
+    result['stdout'] = list()
+    for cmd in commands:
+        try:
+            output = runner.get_command(cmd)
+        except ValueError:
+            output = 'command not executed due to check_mode, see warnings'
+        result['stdout'].append(output)
+
+
+    result['warnings'] = warnings
+    result['stdout_lines'] = list(to_lines(result['stdout']))
+
+    module.exit_json(**result)
+
+
+if __name__ == '__main__':
+    main()

network/dnos10/dnos10_config.py

@@ -0,0 +1,280 @@
+#!/usr/bin/python
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+DOCUMENTATION = """
+---
+module: dnos10_config
+version_added: "2.2"
+author: "Senthil Kumar Ganesan (@skg_net)"
+short_description: Manage Dell OS10 configuration sections
+description:
+  - Dell OS10 configurations use a simple block indent file syntax
+    for segmenting configuration into sections.  This module provides
+    an implementation for working with Dell OS10 configuration sections in
+    a deterministic way.
+extends_documentation_fragment: dnos10
+options:
+  lines:
+    description:
+      - The ordered set of commands that should be configured in the
+        section.  The commands must be the exact same commands as found
+        in the device running-config.  Be sure to note the configuration
+        command syntax as some commands are automatically modified by the
+        device config parser. This argument is mutually exclusive with O(src).
+    required: false
+    default: null
+    aliases: ['commands']
+  parents:
+    description:
+      - The ordered set of parents that uniquely identify the section
+        the commands should be checked against.  If the parents argument
+        is omitted, the commands are checked against the set of top
+        level or global commands.
+    required: false
+    default: null
+  src:
+    description:
+      - Specifies the source path to the file that contains the configuration
+        or configuration template to load.  The path to the source file can
+        either be the full path on the Ansible control host or a relative
+        path from the playbook or role root dir.  This argument is mutually
+        exclusive with O(lines).
+    required: false
+    default: null
+  before:
+    description:
+      - The ordered set of commands to push on to the command stack if
+        a change needs to be made.  This allows the playbook designer
+        the opportunity to perform configuration commands prior to pushing
+        any changes without affecting how the set of commands are matched
+        against the system.
+    required: false
+    default: null
+  after:
+    description:
+      - The ordered set of commands to append to the end of the command
+        stack if a changed needs to be made.  Just like with I(before) this
+        allows the playbook designer to append a set of commands to be
+        executed after the command set.
+    required: false
+    default: null
+  match:
+    description:
+      - Instructs the module on the way to perform the matching of
+        the set of commands against the current device config.  If
+        match is set to I(line), commands are matched line by line.  If
+        match is set to I(strict), command lines are matched with respect
+        to position.  If match is set to I(exact), command lines
+        must be an equal match.  Finally, if match is set to I(none), the
+        module will not attempt to compare the source configuration with
+        the running configuration on the remote device.
+    required: false
+    default: line
+    choices: ['line', 'strict', 'exact', 'none']
+  replace:
+    description:
+      - Instructs the module on the way to perform the configuration
+        on the device.  If the replace argument is set to I(line) then
+        the modified lines are pushed to the device in configuration
+        mode.  If the replace argument is set to I(block) then the entire
+        command block is pushed to the device in configuration mode if any
+        line is not correct.
+    required: false
+    default: line
+    choices: ['line', 'block']
+  update:
+    description:
+      - The I(update) argument controls how the configuration statements
+        are processed on the remote device.  Valid choices for the I(update)
+        argument are I(merge) and I(check).  When the argument is set to
+        I(merge), the configuration changes are merged with the current
+        device running configuration.  When the argument is set to I(check)
+        the configuration updates are determined but not actually configured
+        on the remote device.
+    required: false
+    default: merge
+    choices: ['merge', 'check']
+  save:
+    description:
+      - The C(save) argument instructs the module to save the running-
+        config to the startup-config at the conclusion of the module
+        running.  If check mode is specified, this argument is ignored.
+    required: false
+    default: no
+    choices: ['yes', 'no']
+  config:
+    description:
+      - The C(config) argument allows the playbook desginer to supply
+        the base configuration to be used to validate configuration
+        changes necessary.  If this argument is provided, the module
+        will not download the running-config from the remote node.
+    required: false
+    default: null
+  backup:
+    description:
+      - This argument will cause the module to create a full backup of
+        the current C(running-config) from the remote device before any
+        changes are made.  The backup file is written to the C(backup)
+        folder in the playbook root directory.  If the directory does not
+        exist, it is created.
+    required: false
+    default: no
+    choices: ['yes', 'no']
+"""
+
+EXAMPLES = """
+- dnos10_config:
+    lines: ['hostname {{ inventory_hostname }}']
+    provider: "{{ cli }}"
+
+- dnos10_config:
+    lines:
+      - 10 permit ip host 1.1.1.1 any log
+      - 20 permit ip host 2.2.2.2 any log
+      - 30 permit ip host 3.3.3.3 any log
+      - 40 permit ip host 4.4.4.4 any log
+      - 50 permit ip host 5.5.5.5 any log
+    parents: ['ip access-list test']
+    before: ['no ip access-list test']
+    match: exact
+    provider: "{{ cli }}"
+
+- dnos10_config:
+    lines:
+      - 10 permit ip host 1.1.1.1 any log
+      - 20 permit ip host 2.2.2.2 any log
+      - 30 permit ip host 3.3.3.3 any log
+      - 40 permit ip host 4.4.4.4 any log
+    parents: ['ip access-list test']
+    before: ['no ip access-list test']
+    replace: block
+    provider: "{{ cli }}"
+
+"""
+
+RETURN = """
+updates:
+  description: The set of commands that will be pushed to the remote device
+  returned: always
+  type: list
+  sample: ['...', '...']
+
+responses:
+  description: The set of responses from issuing the commands on the device
+  retured: when not check_mode
+  type: list
+  sample: ['...', '...']
+
+saved:
+  description: Returns whether the configuration is saved to the startup 
+               configuration or not.
+  retured: when not check_mode
+  type: bool
+  sample: True
+
+"""
+from ansible.module_utils.netcfg import NetworkConfig, dumps
+from ansible.module_utils.network import NetworkModule
+from ansible.module_utils.dnos10 import get_config, get_sublevel_config 
+
+def get_candidate(module):
+    candidate = NetworkConfig(indent=1)
+    if module.params['src']:
+        candidate.load(module.params['src'])
+    elif module.params['lines']:
+        parents = module.params['parents'] or list()
+        candidate.add(module.params['lines'], parents=parents)
+    return candidate
+
+
+def main():
+
+    argument_spec = dict(
+        lines=dict(aliases=['commands'], type='list'),
+        parents=dict(type='list'),
+
+        src=dict(type='path'),
+
+        before=dict(type='list'),
+        after=dict(type='list'),
+
+        match=dict(default='line',
+                   choices=['line', 'strict', 'exact', 'none']),
+        replace=dict(default='line', choices=['line', 'block']),
+
+        update=dict(choices=['merge', 'check'], default='merge'),
+        save=dict(type='bool', default=False),
+        config=dict(),
+        backup =dict(type='bool', default=False)
+    )
+
+    mutually_exclusive = [('lines', 'src')]
+
+    module = NetworkModule(argument_spec=argument_spec,
+                           connect_on_load=False,
+                           mutually_exclusive=mutually_exclusive,
+                           supports_check_mode=True)
+
+    parents = module.params['parents'] or list()
+
+    match = module.params['match']
+    replace = module.params['replace']
+    result = dict(changed=False, saved=False)
+
+    candidate = get_candidate(module)
+
+    if match != 'none':
+        config = get_config(module)
+        if parents:
+            contents = get_sublevel_config(config, module)
+            config = NetworkConfig(contents=contents, indent=1)
+        configobjs = candidate.difference(config, match=match, replace=replace)
+
+    else:
+        configobjs = candidate.items
+
+    if module.params['backup']:
+        result['__backup__'] = module.cli('show running-config')[0]
+
+    commands = list()
+    if configobjs:
+        commands = dumps(configobjs, 'commands')
+        commands = commands.split('\n')
+
+        if module.params['before']:
+            commands[:0] = module.params['before']
+
+        if module.params['after']:
+            commands.extend(module.params['after'])
+
+        if not module.check_mode and module.params['update'] == 'merge':
+            response = module.config.load_config(commands)
+            result['responses'] = response
+
+            if module.params['save']:
+                module.config.save_config()
+                result['saved'] = True
+
+        result['changed'] = True
+
+    result['updates'] = commands
+
+    module.exit_json(**result)
+
+if __name__ == '__main__':
+    main()