* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
* nxos_snmp_user: platform fixes for get_snmp_user
snmp user output behavior varies quite a bit for the different nxos platforms and required several workarounds:
- N5K/N6k
- These platforms do not support structured output for `show snmp user`.
- The current code lands in an `except` clause when the output is not structured; so I added a new `get_non_structured_snmp_user` method to scrape the state from the regular cli output if it's present.
- N9K-F
- The `group` data in the JSON output is different for this platform; it has a different key (just `group` instead of `TABLE_groups` or `group_names`) and it is not indexed
- For a single group the value is a string, for multiple groups it's a list
- sanity
- N5K/N6K/N9K-F platforms will reject `no snmp user <name> <role>` when it's the last role defined for the user.
- workaround is to use `nxos_user` to remove the user
- Changes validated on:
- `N3K, N3K-F, N35, N6K, N7K, N9K, N9K-F`
- `6.0(2)A8`
- `7.0(3)I2, 7.0(3)I4, 7.0(3)I5, 7.0(3)I6, 7.0(3)I7`
- `7.3(2)D1`
- `7.3(3)N1, 7.3(4)N1`
- `8.3(2)`
- `9.2(2), 9.2(3)`
* fix lint warning
* use navigate_value instead navigate_hash
* add async wait method
* update dict compare
* remove unuse methods
* not all modules have timeouts parameter
* navigate_value, the input data may be None
* Same api client can be used for other service as well
* Incorporated Review comments. Modified Category and Guest Fact modules which are also dependent on vmware_rest_client module util
* Adding Integration Tests for vmware_rest_client changes
* Changes to incroporate changes in vcsim testware
* Change to get vm name to attach the tag
* Alter tests to pass
* Change diff_against to make changed work again
* Add another diff_against
* Expose supports_sessions across all EOS connection types
* Change session warning to failure
* supports_sessions needs to be a method to survive the rpc boundary
* Alter tests to match
It is possible the EOS appliance doesn't have an IP address on the
management1 interface, instead just check we have found that interface.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* sysctl will now return an error if the value is invalid
sysctl can fail to set a value even if it returns an exit status 0. More
details: https://bugzilla.redhat.com/show_bug.cgi?id=1264080. Because of
this in case of an invalid value or a read-only file system, sysctl
module would return OK, even though it didn't set anything. To be sure
that sysctl correctly applied the changes we also need to check the
output of stderr.
* Run sysctl with LANG=C
Because we are parsing sysctl stderr we need to make sure that errors
are persistent across different system language settings.
* Add changelog fragment for sysctl
- Created `sanity.yaml` to contain all of the tests previously kept in separate files
- Removed `cli` and `nxapi` test directories
- Tested on current supported platforms and versions: `N3K,N6K,N7K,N9K,N3K-F,N9K-F`
* remove deprecated get_md5 from stat
fixes#55309
* removed get_md5 from tests involving stat
* keep get_md5 but hide it
* rst it
* ammended comment
* ws
* added ignore for hidden md5
* Make ansible adhoc work with include_role
Fix logic condition so that include_role works
without
```
ERROR! 'async_val' is not a valid attribute for a IncludeRole
The error appears to be in 'None': line 0, column 0, but may
be elsewhere in the file depending on the exact syntax problem.
(could not open file to display line)
```
* Add include_role test for adhoc
* remove external grep call and parse with python
* use function for repeated code
* use module.get_bin_path() for iscsiutil on HPUX
* some code opt for HPUX
* clean up non-module code, module being defined is a requirement for this code
* import get_bin_path() directly and use without module prefix
* Add integration tests for AIX and HP-UX
* add changelog fragment
* Apply suggestions from code review
Co-Authored-By: mator <matorola@gmail.com>
* Apply suggestions from code review #2
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove strict requirement on executable to exist for get_bin_path() as
it will allow facts gathering to continue without an error. Almost all
other files under facts do not have "required=True" (except 2 files,
which should be probably fixed). And check return value for
get_bin_path() , before run attempt.
* add check for AIX lsattr run_command return code
* nxos_snmp_traps: fix 'group: all' for N35 platforms
- `group: all` attempts to enable traps for all features defined in the module's `feature_list`
- `N35` platforms do not support `snmp-server enable traps bfd`; so removing `bfd` from the `feature_list` for that platform
- Minor cleanup in `sanity.yaml` test file
* whitespace lint fix
* Fixes Netconf_config single parameter bug
Fixes 56022
fixed get_config to not require multiple parameters to just run a backup
* Add Integration test for netconf_config
Associated with #56022
tests backup through netconf only using one parameter.
* Added debug to the begin and end of file
* Fix formatting of save config. #56022
* removed blank line at end: #56022
* add vmware_evc_mode module
* alter result message for absent/absent
* Apply suggestions from code review
Co-Authored-By: CastawayEGR <36353334+CastawayEGR@users.noreply.github.com>
* add idempotency test
* change result dict to evc_mode_msg
* refactor to use pyvmomi class
* fix update to only process task on update
* minimize update code
* add single quotes around vars to match other code
* pass datacenter to cluster find
* add check_mode to disable test
This gives us a little more structure to our console logs, which make it
easier for machines / humans to parse. It will be helpful once the
ansible network team starts importing this data into elastic-recheck.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
This has been broken for some time, but only noticed recently. Because
vyos_command isn't supported on ansible_connection=local, update our
testing to account for that.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Otherwise, we get the following error:
ERROR: ncclient 0.6.4 requires selectors2>=2.0.1, which is not installed.
when running ansible-test.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
- `vmware_target_canonical_facts`
- `vmware_vcenter_settings`
- `vmware_vcenter_statistics`
- `vmware_vm_facts`
- `vmware_vm_host_drs_rule`
- `vmware_vm_vm_drs_rule`
- `vmware_vmkernel`
- `vmware_vmkernel_facts`
- `vmware_vspan_session`
- `vmware_vswitch`
- `vmware_vswitch_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* Fix loading namespaced doc_fragments
The syntax for specifying a different fragment name was already
using '.' as a separator, so the code needed to be tweaked to
avoid choking on names like `testns.testcoll.fragname` and
`testns.testcoll.fragname.altvar`.
`get_plugin_class()` returns 'docfragment' for the fragment loader;
mangling `subdir` provides consistent alignment with the normal plugin
directory names and avoids needing special handling of plugin types
with 'module' in the name.
* Add changelog entry
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_drs_group`
- `vmware_drs_group_facts`
- `vmware_drs_rule_facts`
- `vmware_drs_portgroup`
- `vmware_drs_portgroup_facts`
- `vmware_dvs_portgroup_facts`
- `vmware_dvswitch`
- `vmware_dvswitch_pvlans`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_inventory`
- `vmware_local_role_facts`
- `vmware_local_role_manager`
- `vmware_local_user_facts`
- `vmware_local_user_manager`
- `vmware_maintenancemode`
- `vmware_portgroup_facts`
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
