* Resolve issues in NetApp E-Series Host module
The E-Series host module had some bugs relating to the update/creation
of host definitions when iSCSI initiators when included in the
configuration. This patch resolves this and other minor issues with
correctly detecting updates.
There were also several minor issues found that were causing issues with
truly idepotent updates/changes to the host definition.
This patch also provides some unit tests and integration tests to help
catch future issues in these areas.
fixes#28272
* Improve NetApp E-Series Host module testing
The NetApp E-Series Host module integration test lacked feature test
verification to verify the changes made to the storage array.
The NetApp E-Series rest api was used to verify host create, update, and
remove changes made to the NetApp E-Series storage arrays.
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Update docs
* Add reboot action plugin
Refactor win_reboot so it is subclassed from reboot
* Use new connection methods
* Test fixes
* Use better uptime command for Linux
Use who -b to get the last time the system was booted rather than uptime, which changes every second.
* Use distribution specefic commands and flags
Query the managed node to determien its distribution, then set the appropriate command and flags.
* Tune debug messages a bit
* Update module docs with details about pre_reboot_delay
s docs
* Ensure that post_reboot_delay is a positive number
* Remove the stringification
* Add integration tests
* Make sure aliases are honored
* Handle systems that have an incorrect last boot time
SystemD and fakehw-clock do not properly set the
last boot time and instead always set it to epoch.
Use a different command if that is the case.
* Copyright and encoding fixes
* Minor fixes based on feedback
* Add exponential backoff to sucess check method
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Fail early with running with local connection
* Update docs based on feedback
* minor refactoring, state mgmt changes
The 'free' strategy still attempts to do all hosts per task before going to the next, it just doesn't wait for slow hosts,
This strategy processes each host as fast as possible to the end of the play before trying to process another host in the pool.
* Add (preview) diff mode support ec2_group
* Add diff mode to some ec2_group integration tests
* Remove unnecessary arguments and add comment to the module notes
* Add changelog
When creating a new account, check to see if the expiration parameter is negative and pass in the appropriate parameter. Since the negative integer passed into expires is converted to time.struct_time which in turn gets converted to a formatted time string when passed to the underlying command, a -1 or large negative number would result in passing a date before 1970-01-01 to the underlying command.
This had the opposite effect of creating an account with no expiration account resulting in a newly created account that was already expired, or just throwing an error on certain systems.
* gather_subset is a list of strings
When gather_subset is an integer, a message pointing out the problem, current tb error
is replaced by this one:
ERROR! the field 'gather_subset' should be a list of (<class 'str'>,), but the item '42' is a <class 'int'>
...
* gathering_facts test: ensure smart gathering is on
* Correct the default doc for attached in ec2_eni
Also corrected a typo in the summary
* Address ansible-test sanity error about E324
* Fix and remove the E325 suppression for ec2_eni
Extends `module_defaults` by adding a prefix to defaults `group/` which denotes a builtin list of modules. Initial groups are: `group/aws`, `group/azure`, and `group/gcp`
* add route module
* add test
* add table
* add route table
* fix dict
* fix
* fix
* route table accept no name
* add default
* fix
* fix
* fix
* fix pep
* support route table
* fix line ending
* fix pep
* fix
* fix
* set the default to 'None'
* make return value only id
* camel and snake
* set test alias
* change facts line ending
* change test
* fix
* add default
* fix
* fix line break
* remove unsafe args
* fix comment
* fix
* adding postgresql server facts
* updating postgresql server facts, minor changes
* changed return dict to list
* fixed test
* fixed several issues
* several updates
* fixed naming
* list -> complex
* try again
* fixed mistake
* added user_visible_state to the result
* added fully_qualified_domain_name
* fixed second test
* updates
* fixed test
* updated samples in return value
* wait for postgresql server to be actually ready
* another approach for test
* second server was not created
* fixing pr comments
* fix sanity
* removed forgotten ansible_facts
* added account_alias in the response of module aws_caller_facts
* added comment to explain list_account_aliases
* renamed caller_identity to caller_facts as the content is extended
* created changelog
* security-policy needs the iam:ListAccountAliases for this module to work
* test now checks for the added field account_alias
* gracefully handle missing iam:ListAccountAliases permission
* Added helper module for generating ACME challenge certificates.
* Soft-fail on missing cryptography. Also check version.
* Adding integration test.
* Move acme_challenge_cert_helper from web_infrastructure to crypto/acme.
* Adjusting to draft-05.
* The cryptography branch has already been merged.
when using only an activation key without any channels.
As already suggested by mattclay in
https://github.com/ansible/ansible/pull/25079
and also patch unit test for rhn_register and
add test case for activationkey only
Portions of the f5-sdk were removed as well as the netaddr library
and were replaced with libraries that are part of ansible. Additionally,
deprecated code has been removed.
* Use newer is_sequence function instead of MutableSequence. Fixes#44327
* Add changelog for #44331
* Update changelog fragment to describe the fix in more detail
Fixes#40650Fixes#40245Fixes#41541
* Refactor netconf_config module as per proposal #104
* Update netconf_config module metadata to core network supported
* Refactor local connection to use persistent connection framework
for backward compatibility
* Update netconf connection plugin configuration varaibles (Fixes#40245)
* Add support for optional lock feature to Fixes#41541
* Add integration test for netconf_config module
* Documentation update
* Move deprecated options in netconf_config module
* New boto3_facts module
boto3_facts aims to help users see whether their python and module
versions are as expected.
* Rename to `assert_python_requirements`
* Update integration tests
* Document options
* fix imports
* boilerplate
* fix docs
* reorder import
* Make distutils optional and fail gracefully when it is not available
* fix example doc
* fix docs on requirements_facts
* Don't use copy.deepcopy in high workload areas, use deepishcopy. ci_complete
* Add tests
* Add changelog fragment
* rename to naive_deepcopy and add extra docs
* Rename to module_response_deepcopy and move to vars/clean
One can install alternate packages managers on debuntu machines.
However, doing so doesn't mean you want to suddenly start using them.
Add in a check similar to the fedora yum/dnf check that sets apt as the
pkg_mgr if the ansible_os_family is Debian.
This commit introduces a new module called vultr_network_facts.
This module aims to return the list of networks avaiable in Vultr.
Sample available here:
```
"vultr_network_facts": [
{
"date_created": "2018-08-02 11:18:49",
"id": "net5b62e8991adfg",
"name": "mynet",
"region": "Amsterdam",
"v4_subnet": "192.168.42.0",
"v4_subnet_mask": 24
}
]
```
* Refactor yum and dnf, add feature parity
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unnecessary module_utils, move the classes into the module code
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove yum -> yum4, out of scope
Signed-off-by: Adam Miller <admiller@redhat.com>
* use ABCMeta
Signed-off-by: Adam Miller <admiller@redhat.com>
* re-arrange run() caller vs callee
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity checks happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix yum unit tests
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unecessary debug statements, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix licensing and attribution in yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* include fix from PR 40737
original commit 5cbda9658a
original Author: Strahinja Kustudic <kustodian@gmail.com>
yum will fail on 'No space left on device', fixes#32791 (#40737)
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel
package generates initramfs), but yum would still exit with a status
0. This is bad, especially for the kernel package, because it makes
it unable to boot. Because the yum module is usually used for
automation, which means the users cannot read every message yum
prints, it's better that the yum module fails if it detects that
there is no free space on the disk.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert "fix licensing and attribution in yumdnf module_util"
This reverts commit 59e11de5a2.
* move fetch_rpm_from_url out of yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the move of fetch_rpm_from_url
Signed-off-by: Adam Miller <admiller@redhat.com>
Make git module support --separate-git-dir option. When git version is higher than 1.7.5, use built-in --separate-git-dir option during the clone. When lower, adjust the location of git dir manually after clone to achieve the same effect.
* Compress src interface into one key
* Modified regex to support varied interface types
* Fixed documentation
* Unpacking return values from splitting method
- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
* Add backup option
* Only backup shadow file when the OS has one
* Only backup shadow file for SunOS
* Update docs on backup feature
* Add changelog fragment
* Add tests for shadow backup
* Remove backup option, make it automatic
Remove the option to enable/disable backups and make it automatic. Add note to docs describing this behavior.
Change tests to account for new module behavior.
Change section name in changelog fragment since minor_features is not a valid section.
NOTE:
1. use os.open() with os.O_CREAT|os.O_EXCL to check existence
and create a lock file if not exists, it's an atomic operation
2. the fastest process will create the lock file and others will
wait until the lock file is removed
3. after the writer finished writing to the password file, all the reading
operations use built-in open so processes can read the file parallel
* Update cloudflare_dns account link
* Add SSHFP and TLSA records to cloudflare_dns module
These are record types which Cloudflare recently added support
for. They both go well together with DNSSEC.
Technically it's a bit of a simplification to use the hash_type
parameter for TLSA records. Yet, it fits with all the real world usage
I have seen, and it keeps the module from sprawling too much.
Related to #43803
* Testing commands over various nxapi levels of cipher and ssl strengths.
* Reworked nxos nxapi ssl/tlv transport testing
* Added additional nxos nxapi httpapi local transport test suite
* Added meta: end_play to nxos nxapi transports task to
prevent execution unless nxos_ssl is defined.
* Refactored nxos nxapi tls and cipher options testing
* Removed blank line
* Renamed variable ssl to the more appropriate ciphers
* After each transport perumation test reset nxapi on the switch to
ensure no previous configuration is still present on the next test.
* 43651: Removed unnecessary changes to nxos_nxapi & removed hard-coded
nxapi port numbers.
* pip: combine chdir and env only when env is set
This fixes an AttributeError when chdir without virtualenv is specified:
File "/tmp/ansible_2UAFsZ/ansible_module_pip.py", line 387, in main
env = os.path.join(chdir, env)
File "/usr/lib64/python2.7/posixpath.py", line 75, in join
if b.startswith('/'):
AttributeError: 'NoneType' object has no attribute 'startswith'
* Add test for pip with chdir
Signed-off-by: Till Maas <opensource@till.name>
* Only template values in vars_prompt rather than all vars
This allows the use of variables in vars_prompt fields but allows variables entered in the prompt to affect play vars rather than throwing an undefined error.
Only post validate if there was a vars_prompt
* Add tests for vars_prompt
* Check the password format
Check the password format and notify user if they
input unencrypted password.
* Fix sanity error
* Add integration test
* Missed a task name
* Hard code the testing password
Since some testing platfrom has no passlib installed
* Add changelog fragment
* Rework some English sentences
* Fix a grammar mistake
* Fix cli_command junos test failure and update doc
* Fix cli_command module integration test failure
for junos
* Update cli_command module doc for prompt and
config command run scenario's
* Update cli_command module doc
* Collecting PEM -> DER conversions.
* Using cryptography instead of OpenSSL binary in some situations.
* Moving key-to-disk writing for key content to parse_account_key.
* Rename parse_account_key -> parse_key.
* Move OpenSSL specific code for key parsing and request signing into global functions.
* Also using cryptography for key parsing and request signing.
* Remove assert statements.
* Fixing handling of key contents for cryptography code path.
* Allow to disable the use of cryptography.
* Updating documentation.
* 1.5 seems to work as well (earlier versions don't have EC sign function). Making Python 2.x adjustments.
* Changing option to select_crypto_backend.
* Python 2.6 compatibility.
* Trying to test both backends separately for acme_account.
* Also testing both backends separately for acme_certificate and acme_certificate_revoke.
* Adding changelog entry which informs about select_crypto_backend option in case autodetect fails.
* Fixing YAML.
* Merge again trickily similar Accelerated networking and IP forwarding
* Add type to enable_ip_forwarding documentation
* Fix merge error
* auth to auto
* azure_rm_networkinterface: remove auth_source from tests
* azure_rm_networkinterface: remove spurious auth_source from test
* azure_rm_networkinterface: Revert formatting on test
* azure_rm_networkinterface: Correct indentation
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
* Remove wait_for & associated params
* Upgrade command dict to top-level, remove more wait_for accessories
* We don't need all this anymore
* Update docs
* Update tests to new argspec
* Be a little more explicit about sendonly
Also remove reference to the word provider.
* Add example of prompt and answer
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
* service tests: check that daemon is really running
(spoiler: it isn't)
* service tests: add PIDFile directive in systemd unit
* service tests: check 'changed' too
* service tests: fix indentation & use changed test
* service tests: #16694 has been fixed a long time ago
* service tests: refactor
- always execute cleaning tasks
- move tests tasks in a dedicated file
* service tests: add test for #42786
* service tests: display value of ansible_service_mgr
* service tests: allow to run tests twice in a row
stop & disable ansible test service
* service tests: 'pattern' value must be a substring
'pattern' parameter is poorly named
* service tests: check ansible_test service status
* service tests: test daemon must handle SIGHUP
because 'initctl reload' sends SIGHUP, otherwise test daemon stops when
receiving the signal
* service tests: remove upstart override file too
and check that files were removed using raw module and stat command
This functionality was not considered when the module was written, but
there's no reason why it shouldn't be supported.
We had to rework the query string construction and object filtering.
This new functionality allows to filter on arbitrary keys and supports
None values.
This PR fixes various issues with the existing framework, including
querying specific objects using construct_url_4 (i.e.
aci_epg_to_contract and aci_static_binding_to_epg)
Vultr API is being inconsisten in what it returns. An empty list when no
resources exists, but a dict of dict when they do. The case needs to be
handled so the module do not fail. An extra test has been added.
* Added support for TLS-ALPN-01 verification.
* Unrelated commit to re-trigger tests.
* Added test for TLS-ALPN-01.
* Try to remove to_bytes in the hope that binary data survives in Python 2.
* Using Base64 encoding for TLS-ALPN-01 value.
Only print warning when ansible.cfg is actually skipped
* Also add unittests for the find_ini_config_file function
* Add documentation on world writable current working directory
config files can no longer be loaded from a world writable current
working directory but the end user is allowed to specify that
explicitly. Give appropriate warnings and information on how.
Fixes#42388
* Refactoring to persistence connection BGP, factory, reload, save, showrun modules
* Refactoring methods from Util to module file
* Removing BGP Utility methods
* Adding to errors that need to be ignored
