* junos_facts refactor to work with resources modules
* Refactor junos_facts module to work with
network resource module.
* Fix unit test failures
* Fix review comments
* Skip gitlab tests if dependencies aren't met
* Skip certain unittests if passlib is not installed
* Fix tests with deps on paramiko to skip if paramiko is not installed
* Use pytest to skip for cloudstack
If either on Python-2.6 or the cs library is not installed we cannot run
this test so skip it
* nxos_vpc: pkl_vrf fixes for #57069Fixes#57069
- Symptom: When playbooks specify `pkl_vrf: default`, the result is that the cli does not set the `vrf` state.
- Analysis:
- First issue: 'default' is a reserved word when used with the `peer-keepalive` `vrf` keyword. It refers to the default rib.
- This is confusing in several ways because `peer-keepalive`'s *default* vrf is the `management` vrf.
- Second issue: When changing only one optional value (`pkl_vrf`) while other optional values are idempotent (`pkl_src`), the result is that the idempotent values are ignored; unfortunately the device cli *replaces* the entire command, in which case the idempotent values are removed.
- e.g. playbook specifies this:
```
{ pkl_dest: 10.1.1.1, pkl_src: 10.2.2.2, pkl_vrf: my_vrf }
```
```
peer-keepalive dest 10.1.1.1 src 10.2.2.2 # original
peer-keepalive dest 10.1.1.1 src 10.2.2.2 vrf my_vrf # intended result
peer-keepalive dest 10.1.1.1 vrf my_vrf # actual result
```
- Third issue: the `pkl` getter was relying on positional data. This broke when the `udp` keyword nvgen'd where `vrf` used to appear (shifting all keywords to the right).
- Tested on regression platforms: `N3K,N6k,N7K,N9K,N3K-F,N9K-F`
* PEP fixes
* PEP fix 2
* pkl should merge by default, not override
* rmv debugs
* add mike's tests
* fix comments
openvswitch_db was not parsing properly some arguments, which caused
some commands to be executed when they shouldn't. This commit fixesit
and adds unit testing for the usecase.
Closes-Bug: #55432
Closes-bug: #43858
* Add tests for KubeAPIVersion
* Legibility improvements for KubevirtVM tests
* Create units.utils.kubevirt with common stuff
* Add some VMIRS unit tests
* Improve error for docker modules when docker-py can't be imported.
* Add changelog.
* Mention platform and Python interpreter in more cases.
* Clarify wording.
* Adjust tests.
* nxos_bgp_neighbor: Add bfd support
- Add support for bfd state in nxos_bgp_neighbor
- Feature Pull Request
- nxos_bgp_neighbor
- Tested on platforms: `N3K,N6K,N7K,N9K`
* bfd T/F now bfd enable/disable
* pep fix ws
* Update dependence's name to firepower-kickstart
* Check response type before getting attributes
* Add unit test for construct_ansible_facts method
* Update error message
* Adding device_facts module for contribution
* changes added for pylint error
* Updated code to solve ansible-test compile error
* Changes to avoide comile error added
* Review Comments changes update
* Avoided blank line
* pylint error changes
* Removed ansible_facts return in error case
* Updated description
* modules renamed
* changing from ansible_facts to device_info
* avoide pep8 error
* Updated sample output
* version changed to 2.9
* Changed Copyright license to BSD
* Changed 3-clause BSD license to 2-clause BSD
* Added unit test support for ome_device_info
* version change
* removed pylint error in unit test modules
* Avoid Sanity error for unit test modules
* updated version
* nxos_interface_ospf: Add bfd support
Add support for `bfd` state in `nxos_interface_ospf`
- Feature Pull Request
`nxos_interface_ospf`
* Fix pep issues
* sanity loop: syntax
* bfd states changed from T/F to enable/disable/default
* doc hdr fixes
* nxos_bfd_global: initial commit
This is an initial POC with just a few commands included. The code has been written somewhat generically so that it can act as a best practices template for re-use in future modules. The implementation follows the yaml cmd_ref style to define each command's getter/setter/type/default. It supports platform-specific defaults.
The basic logic is to collect all relevant data in a `cmd_ref` dict and pass that around to various methods.
In the BFD case the devices don't provide JSON output so we have to screen-scrape with show runs.
BFD does not support present/absent states so there is no state param.
BFD has three different property types to handle. We can add add'l types as needed:
- int
- int_list (list of ints)
- str (needs support for 'no' keyword)
* Use get_capabilities to find platform type
* PR comment fixes, round 1
* Minor cleanups
* nxos_bfd_global: create NxosCmdRef in module_utils
This commit just takes the latest bfd global code and moves the bulk
of the code into new `class NxosCmdRef` in `module_utils/nxos/nxos.py`.
The only remaining code in `nxos_bfd_global.py` are the calls from `main()`.
* Add remaining command properties and documentation
* update argument_spec
* Add check for _exclude; add sanity test
* Add targets files for bfd
* Context and state absent updates
* Add dict support to cmd_ref
* Changed remaining list commands to dict usage
* Add idempotence check for dict
* Fix existing overwrite bug
* Move pattern matching logic into its own method
* add support for 'command: absent'
* Add `get_platform_shortname`; update BFD platform-specific settings
* /absent/deleted/
* /sh/show/ in prepare_nxos_tests
* add dict check to get_platform_shortname
* Add normalize_defaults()
* UTs for bfd_global
* support yaml for both py2/py3
* update cmd_ref doc header
* Fix python2.6 incompatibility with dict comprehensions
* Fix bfd_global doc header (yaml syntax fail)
* more shippable fixes
* yet more shippable fixes
* shippable: remove r' ' wrappers
* docfix - remove ':'
* escape regex ctl chars in yaml table
* remove extra blank lines
* Fix str(None) issue
* Command context updates
* import PY2,PY3 instead of import sys
* fix ordereddict import & parent_context
* try/except for yaml import
* fix import issue for ordereddict
* remove epdb
* nxosCmdRef_import_check() workaround for shippable
* fix PEP ws errors
* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
* Returns zone ID for existing zone or `null`
* route53_zone: add module unit tests
* route53_zone: add compatibility with Python 2.6 to the unit tests
* route53_zone: address pycodestyle warning (add blank line)
* Adding New Model onyx_qos for Configuring QoS on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_qos
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on onyx_qos Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable Comments Phase 3
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Current Version 2.9
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove code but leave the metadata so that they can be listed as
removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
2.9 porting guide
* Adding Support For Vxlan In Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable failures
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on PR
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding New Model for Configure Buffer Pool on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_buffer_pool.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* fix missing attribs with dirct module execution
* also make remote tmp handling smarter
update tests
* set default if attrib does not exist
* add simple test
* add asa_og module
* add test
* fix pep8
* fix some sanity pylint
* fix import error order
* fix import
* replace cmd() method
* rename file and class
* add mock for connection
* fix commands in replace test function
* fix lines list
* update unit test
* fix 'and' logic for port-object command
* restore previous unit test; fix pep8 and remove debug
* other unit tests
* Add state present, absent, replace
* Update doc; add default for state
* update unit test with state present/absent
* fix typo in unit test
* fix pep8 too many blank lines
* fix show run for service object ASA Ver 8.x
* Add description field; fix bug for state present and absent
* Re-designed module structure for network, service and port objects
* update integration test for new module structure
* fix pep8
* update EXAMPLES and RETURN
* update units tests
* fix module typos in unit test
* removed provider from examples
* fix missing comma in replace test
* fix module name and remove provider
* update license
* remove register; update license; change import order; chage def state
* remove shebang
* fix doc default state
* change import order
* Update year in banner
* fix integration test as set of tasks
* remove arg_spec
* remove extends_documentation_fragment: asa
* Update DOC, remove unused import, change import order
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
Currently, if we try to stop or start a network two time in a row, the
second call will fail. With this patch:
- we don't recreate a network, if it exists
- we only stop a network if it's active, and so we avoid an exception
saying the network is not active
* test: mock libvirt
* add integration tests for virt_net
* test: enable virt_net test on RedHat 7 and 8
* ci: use the unsupported alias
* tests that require privileged mode are run in VM
* virt_net/create raise unexpected libvirt exception
* import mock from units.compat
* virt_net: do not call create() on "active" network
* virt_net func test: only clean up the libvirt packages
* test: virt_net: don't use assert_called()
* virt_net: add the destructive alias
* move the test in virt_net dir
* test/virt_net: clean up the network at the end
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Add support for multiple IPv6 addresses in nxos_l3_interface module
Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.
* Add internal support for IPv6 list
* Fix module idempotency
* Initialize tests for nxos_l3_interface
* Fix IPv4 removal idempotency
* Fix data extraction from nxos config
* Fix silently ignored interfaces in nxos_l3_interface
* Add warning when interface does not exist in nxos config
* Adding cnos_user module to Ansible
* Update cnos_user.py
* Adding Functional test cases and unit test cases.
* Fixing Bug found in testing with Lenovo Mars.
* Review comments incorporated
* Review comments implemented.
* Copy paste mistake
* Modify EXOS module utils to utilize 'httpapi' or 'network-cli' connection
* Changes to cliconf plugin to support 'json' or 'text' output for compatibility between network-cli and httpapi
* Add HTTPAPI plugin supportng JSONRPC and RESTCONF for EXOS
* exos_facts modify commands with run script cli2json.py to command dictionary specifying 'json' output
Load appropriate fixtures
* Update exos_config module to utilize the get_diff and get_default_flag functionality.
JSONRPC doesn't work well with pipes, regex MULTILINE
* Support for NOS agnostic 'cli_config' module by implementing 'get_default_flag' and 'get_diff' functionality
* Update Ansible Documentation regarding the connections available for EXOS
* nxos_interfaces_ospf: fix passive-interface states & check_mode
This fix addresses issues #41704 and #45343.
The crux of the problem is that `passive-interface` should have been treated as a tri-state value instead of a boolean.
The `no` form of the command disables the passive state on an interface (allows it to form adjacencies and send routing updates). It's essentially an override for `passive-interface default` which enables passive state on all OSPF interfaces.\*
This `no` config will be present in `running-config`.
\**See `router ospf` configuration.*
Since both enable and disable states are explicit configs, the proper way to remove either of these is with the `default` syntax.
Passive-interface config syntax:
```
ip ospf passive-interface # enable (nvgens)
no ip ospf passive-interface # disable (nvgens)
default ip ospf passive-interface # default (removes config, does not nvgen)
```
Code changes:
* `passive_interface` param changed from boolean to string, restricted to `true`,`false`,`default`.
* Several passive-interface specific checks were added because the existing module logic tends to test for true or false and doesn't handle the None case.
* Fixed `check_mode`.
Sanity verified on: N9K,N7K,N3K,N6K
* Fix doc header
* Unit tests for passive-interface
* doc fix#2
* Fix indent for SA
* Remove 'default' keyword, restore bool behavior
* remove changes to sanity
