Change:
- Previously CachePluginAdjudicator#flush only removed entries from the
cache backend that it knew about by using them earlier. Now it calls
the underlying plugin's flush() method.
Test Plan:
- New unit tests
Tickets:
- Fixes#68770
Signed-off-by: Rick Elrod <rick@elrod.me>
* Strip spaces in module names in explicit actions
Change:
- When an action is called like "action: copy foo=bar", strip spaces
around the action name.
- This allows "action: copy foo=bar" to work as expected.
Test Plan:
- New integration tests
Tickets:
- Fixes#62136
Signed-off-by: Rick Elrod <rick@elrod.me>
Add integration tests for unarchiving as unprivileged user
Break tasks into separate files for easier reading and maintenance
Create a user by specifying a default group of 'staff' for macOS.
The user module does not actually remove the user directory on macOS,
so explicitly remove it.
Put the removal tasks in an always block to ensure they always run
Co-authored-by: Philip Douglass <philip.douglass@amadeus.com>
Co-authored-by: Sam Doran <sdoran@redhat.com>
The iso8601_micro and iso8601 facts incorrectly called now.utcnow(), resulting
in a new timestamp at the time it was called, not a conversion of the previously
stored timestamp.
Correct this by capturing the UTC timestamp once then calculating the local
time using the UTC offset of the current system.
* Use time.time() for getting the current time
* Convert from that stored epoch timestamp to local and UTC times
* Used existing timestamp for epoch time
* Add unit tests that validate the formate of the return value rather than an exact value since mocking time and timezone is non-trivial
Follow up to #70221
Related to #67794
CVE-2020-1736
When set_mode_if_different() is called with mode of 'None', ensure we issue
a warning about the change in default permissions.
Add integration tests to ensure the warning works properly.
* Fix tests
- actually use custom module 🤦♂️
- verify file permission on created files
- use remote_tmp_dir so we're ready for split controller
- improve test module so we can skip the call to set_fs_attributes_if_different()
- fix tests for CentOS 6
Change:
- Allow older git to verify tags again
- Enable verification tests everywhere, even if most of them only work
on newer git. Some of them work on older git and they test the --raw
parameter.
Test Plan:
- Re-enabled subset of git tests
Tickets:
- Fixes#64469
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously, we only showed that something would have changed, not what
would have changed. This allows us to show what will chang as well.
Test Plan:
- Local RHEL8 VM
- New integration tests
Tickets:
- Fixes#66132
Signed-off-by: Rick Elrod <rick@elrod.me>
* Also validate top-level version_added.
* Fix error code.
* Produce same version_added validation error in schema than in code (and stop returning it twice).
* Return correct error codes for invalid version_added for options and return values.
* Add changelog.
* Fix forgotten closing braket.
* Accept 'historical' for some top-level version_added.
* dnf: Add nobest option
* dnf: Fix indent, add nobest specifically to dnf not yum
* Add changelog for dnf: add nobest option
* dnf: Add nobest to yumdnf module argument_spec
* dnf: remove nobest from module paramaters in yumdnf.py
* dnf: Add test for nobest option
* dnf: Cleanup packages in nobest test at last
* dnf: Cleanup manually added repos in nobest test at last
* dnf: Remove dnf-plugins-core as well in nobest test
* dnf: Change nobest release version to 2.11
* Change changelog number according to change in PR number
* Change changelog number according to change in PR number
Change:
- On Linux, there are situations where a host might be a KVM host but
not have the kernel module enabled (it might be compiled in instead).
In these cases, /dev/kvm will still exist, and rather than reporting
NA, we should report that the host is a KVM host.
Test Plan:
- Local
Signed-off-by: Rick Elrod <rick@elrod.me>
* Change default file permissions so they are not world readable
CVE-2020-1736
Set the default permissions for files we create with atomic_move() to 0o0660. Track
which files we create that did not exist and warn if the module supports 'mode'
and it was not specified and the module did not call set_mode_if_different(). This allows the user to take action and specify a mode rather than using the defaults.
A code audit is needed to find all instances of modules that call atomic_move()
but do not call set_mode_if_different(). The findings need to be documented in
a changelog since we are not warning. Warning in those instances would be frustrating
to the user since they have no way to change the module code.
- use a set for storing list of created files
- just check the argument spac and params rather than using another property
- improve the warning message to include the default permissions
* ensure hostvars are available on delegation
* also inventory_hostname must point to current host and not delegated one
* fix get_connection since it was still mixing original host vars and delegated ones
* also return connection vars for delegation and non delegation alike
* add test to ensure we have expected usage when directly assigning for non delegated host
Some platform such as ESXi does not implement EpollSelector,
which is selected by DefaultSelector. Use SelectSelector which is
based upon 'select' implementation. This works perfectly with
a platform like VMware ESXi.
Fixes: #70238
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Encode/Decode files in UTF-8
* Use helper function in ansible
* Add an integration test
* Use emoji in test data.
* add changelog
* Also support non-ascii chars in filepath and add tests about this.
* Also use non-ascii chars in replaced text and ensure not to break cron syntax.
* rename self.existing to self.n_existing
* rename crontab.existing to crontab.n_existing
Change:
- Refactoring to make it harder to get wrong and easier to read.
- Generalize become_unprivileged tests and fix some that never worked
but also never failed.
Test Plan:
- CI, new units/integration tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix missing quoting for remote_tmp in second mkdir of shell module. Issue #69577
* adding changelog
* fixing typo in changelog entry
* adding test case
Adding test case written by bmillemayhias.
* using $HOME instead of ~
* fixing commit measage
* Update 69578-shell-remote_tmp-quoting.yaml
Co-authored-by: Brian Kohles <me@briankohles.com>
debconf module exposes sensitive information to logs, console.
Add a note to user about using no_log=True to hide such
information from console.
Fixes: #32386
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
A couple of years ago Slackware -current began using a plus (“+”) at the end of the distribution version string to indicate a future version work-in-progress.
Rearrange distribution_files unit tests to easily support more tests
- add conftest with common fixtures
- use parametrize for testing multiple scenarios
* Add changelog
* Add unit tests for Slackware distribution parsing
* Use correct fixtures for Slackware
Data comes from /etc/slackware-version
Co-authored-by: Sam Doran <sdoran@redhat.com>
Co-authored-by: <Eduard Rozenberg <eduardr@pobox.com>>
A recent updated to psutil, which is a dependency of ansible-runner, fails
to install on older versions of pip.
Commit with the breaking change:
135628639b
pipe lookup plugin uses Popen with shell=True intentionally.
This is considered a security issue if user input is not validated.
Updated docs to reflect this information for the user. Also, added
Bandit B602 documentation link for further reading.
Fixes: #70159
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Add integration tests for various cases
- Fix wrong use of "its" in an exception thrown in varnames when it
throws an AnsibleError, given a term of the wrong type.
Test Plan:
- new tests, CI
Tickets:
- Fixes#70546
Signed-off-by: Rick Elrod <rick@elrod.me>
- ensure we preserve the typeerror part of the exception so loop defereed error handling
can postpone those caused by undefined variables until the when check is done.
- fix tests to comply with the 'new normal'
- human_to_bytes and others can issue TypeError not only on 'non string'
but also bad string that is not convertable.
Co-authored-by: Sloane Hertel <shertel@redhat.com>
Co-authored-by: Sloane Hertel <shertel@redhat.com>
Change:
- Use parse_kv() for parsing in the csvfile lookup plugin. This allows
us to handle multi-word search keys and filenames. Previously, the
plugin split on space and so none of these things worked as expected.
- Add integration tests for csvfile, testing a plethora of weird cases.
Test Plan:
- New integration tests, CI
Tickets:
- Fixes#70545
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Followup to #70504. We need to not pass the 'warn' parameter from the
action plugin either, unless it's True. Otherwise, even though it
defaults to false, we always show the deprecation.
Test Plan:
- Local
Signed-off-by: Rick Elrod <rick@elrod.me>
* speed up modify_module
* Remove debugging
* ci_complete
* Simplify generic_visit, alias to visit, eliminate some attr lookups
* ci_complete
* Add changelog fragment
* Fix ansible-test error in community.aws
* Add changelog entry for fix
* Change check from None to string_types
* Update changelogs/fragments/70507-validate-null-author.yaml
clarify wording "or a list of strings"
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update test/lib/ansible_test/_data/sanity/validate-modules/validate_modules/schema.py
clarify wording - single string or not specified valid
Co-authored-by: Felix Fontein <felix@fontein.de>
* Do not fail but return None when given outside list
Co-authored-by: Felix Fontein <felix@fontein.de>
Change:
- The command warnings feature which suggests that users use modules
instead of certain commands is now deprecated. Its `warn` paramater
and `COMMAND_WARNINGS` configuration options are also deprecated.
Their use will become an error in version 2.13.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Sam Doran <sdoran@redhat.com>
Change:
Our handling of NetBSD virtualization facts led to facts that were just
plain incorrect. One example is reporting Xen even when the system is
running on something completely different (like KVM).
As stated by the reporter of #69352, NetBSD has a better sysctl setting
to use for this information, machdep.hypervisor.
This PR does the following:
- Try to use machdep.hypervisor sysctl value if the other sysctl values
we check don't end up with enough information to be useful
- Only look for /dev/xencons and assume Xen if nothing else works
(Really this should probably return 'unknown' since the file exists on
non-Xen systems and is not very useful).
- Add a few more patterns (Xen matches and also Hyper-V) to
VirtualSysctlDetectionMixin#detect_virt_product.
This change is slightly breaking:
- If the first two attempts at using sysctl worked before,
(machdep.dmi.system-product and machdep.dmi.system-vendor), they will
continue to work.
- For cases when those values didn't work, previously the existence of
/dev/xencons was checked, and if found, we reported 'xen' (even on
non-Xen systems when the file existed). After this PR, we try the
machdep.hypervisor sysctl key before still falling back to
/dev/xencons. This means that in some cases, we might go from
(wrongly) saying "xen" to giving a more accurate value such as "kvm"
or "Hyper-V".
Test Plan:
- Tested with local NetBSD VM and got 'kvm' instead of 'xen' back.
Tickets:
- Fixes#69352
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- module_utils.basic.is_special_selinux_path() used a string ==
bytestring comparison which returned False and made Ansible think that
certain filesystems aren't, in fact, special-cased, when they should
be. Ensure both sides of the == are bytestrings.
Test Plan:
- Added `copy` integration tests for this case.
Tickets:
- Fixes#70244
Signed-off-by: Rick Elrod <rick@elrod.me>
* ansible-doc man formatter: do not crash when description isn't there.
* Change to report a better error message when description is not there.
* Add test.
When user uses home directory in --playbook-dir option
of ansible-inventory command, it warns user about this.
This PR suppress the warning message for user's home directory usage
in ansible-inventory command.
Fixes: #65262
Signed-off-by: Satyajit Bulage <sbulage@redhat.com>
The ssh_args were sometimes not correctly applied to the connection
when using _play_context. Use get_option() instead to ensure the
correct ssh_args are always applied.
* Use the first galaxy server supporting v1 for roles. Fixes#65440
* Add changelog fragment
* This is best effort, fall back to original behavior if something bad happens
* misc collection metadata fixes
* parse collection meta with libyaml if available
* require only Mapping for validation
* add explanatory text for _meta_yml_to_dict
* ignore custom pylint rule
* this code shouldn't import a bunch of stuff from ansible, since it's run under the import sanity test
Change:
- In certain situations, such as when the input string contains null
bytes (\0), syslog.syslog will throw a TypeError. Handle that and
fail_json instead.
Test Plan:
- New test
- ansible-test --docker centos[68] (for py2 and py3 respectively)
Tickets:
- Refs #70269
Signed-off-by: Rick Elrod <rick@elrod.me>
* ansible-test - do not validate blacklisted ps modules
* Update changelogs/fragments/validate-modules-ps-doc-blacklist.yaml
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* Ensure not to remove existing packages while installing apt packages.
* Make all lines shorter than 160 characters
* Allow removing packages only when upgrading.
* Add integration tests
In some usecases, we want to be able to clone a single branch
of a repository, without using --depth (which implies --single-branch).
* Use branch name when available
- update description of parameter
- consolidate branch or tag checking for easy reuse
* Add changelog
* Use static task imports rather than dynamic includes
* Add integration tests for single_branch
* Account for older versions of git
* Minor tweak to warnings
Co-authored-by: Laurent Coustet <laurent.coustet@clarisys.fr>
Co-authored-by: Sam Doran <sdoran@redhat.com>
* [Bugfix] curses.setupterm() error
When run playbook in celery task, curses.setupterm() will be failed
```
File "<frozen importlib._bootstrap>", line 675, in _load
File "<frozen importlib._bootstrap>", line 655, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 205, in _call_with_frames_removed
File "/Users/guang/.virtualenvs/ansible/lib/python3.6/site-packages/ansible/plugins/action/pause.py", line 45, in <module>
curses.setupterm()
TypeError: argument must be an int, or have a fileno() method.
```
* Add changelog
Co-authored-by: Sam Doran <sdoran@redhat.com>
Handle colon appearing in filename while parsing the mimetype and charset
using file command.
Fixes: #70256
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- On Python 3.9, `crypt.crypt` will throw instead of returning `None`
when the algorithm isn't supported. So we catch that and handle it
the same way we handled the algorithm not being supported on 3.8: by
throwing AnsibleError.
Test Plan:
- CI for <=3.8.
- Local for 3.9b3:
ansible -m debug -a "msg=\"{{ 'changeme' | password_hash('bcrypt') }}\"" localhost
Before:
localhost | FAILED! => {
"msg": "Unexpected failure during module execution.",
"stdout": ""
}
After:
localhost | FAILED! => {
"msg": "crypt.crypt does not support 'bcrypt' algorithm"
}
Tickets:
- Fixes#69930
Signed-off-by: Rick Elrod <rick@elrod.me>
The `packaging` and `pyparsing` packages are now installed by `ansible-test` during provisioning of RHEL instances to match the downstream vendored versions.
Change:
- Remove _get_item() alias as it has been deprecated
- Update tests
- Remove relevant sanity curtailment
- Add changelog
Test Plan:
CI, grep
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
Removes with_* loop squashing and tests for 2.11
Test Plan:
CI, and grepped for with_items in package manager integration targets.
There might be some test cases in collections which need to stop testing
this behavior.
Signed-off-by: Rick Elrod <rick@elrod.me>
* Clarify blockinfile docs for insertafter/insertbefore
It's not clear from the docs that these options take effect
only when no marker lines are found in the document.
* Add changelog fragment
The upcoming pyparsing 3 release will require Python 3.5 or later, see:
https://github.com/pypa/packaging/issues/313
Unfortunately pip 8.x and earlier versions do not support python version requirements, which is why this constraint is needed.
* builtin downstream vendoring support
* allows downstream packagers to install packages to `ansible/_vendor` that will automatically be added to head of sys.path during `ansible` package load
* tests
* sort conflicting package names in warning text
* sanity fixes
* skip unnecessary comparison
* Validate ansible-base & collection's runtime.yml
Add new test `runtime-metadata`
* Schema validation of file
* Error if a a legacy meta/routing.yml exist in a collection
* removal_date OR removal_version
* Add tombstone validation.
* Allow both ISO 8601 date strings and datetime.date objects (from YAML dates).
* Address review comments.
* Add metadata to test collection.
* Add requirements file.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Matt Clay <matt@mystile.com>
* Add mccabe complexity testing
* Make mccabe complexity an optional error
* Add mccabe to new sanity pylint requirements
* Add a changelog fragment.
Co-authored-by: Matt Clay <matt@mystile.com>
When using 'remote_src: yes' and 'mode: preserve', the code handling
the file modes has to be handled on the remote node because it's
the one that has access to the source files. This means that the
copy module itself must handle this, rather than the copy action
plugin (which is where all that logic exists). The copy module
handles this when we copy a single file over. But when it is a
directory as the src parameter value, the mode of the files
beneath it are not considered. Subdirectories are copied with
shutil.copytree() which will preserve permissions automatically.
Individual files are copied with shutil.copyfile() which does NOT
preserve permissions. We need to add some calls to shutil.copymode()
to correct that.
Note: This *always* retains individial file permissions. Specifying
a 'mode' other than 'preserve' when giving a source directory for
the 'src' param does not make sense so will be ignored in that case
only.
Fixes#69783
* Add changelog and test
* config: singular ANSIBLE_COLLECTIONS_PATH
Every other *_PATH setting in ansible is singular, and the traditional
$PATH variable is also singular despite containing a list of
directories. Let's be consistent both internally and with POSIX
tradition.
* update all ANSIBLE_COLLECTIONS_PATHS env references to be singular
* deprecate plural ANSIBLE_COLLECTIONS_PATHS setting
Replace the ansible-base changelog linting and generation tool with antsibull-changelog and make it available for linting collections. Previously changelog linting was limited to ansible-base.
* Tag return value docs if they are a dict (and not str/None).
* Try to parse return docs as YAML.
* Properly dump return values in ansible-doc.
* Adjust plugin formatter.
* Add changelog fragment.
* Don't add 'default' for return values.
* Fix plugin_formatter.
* Only try to parse return docs if they are still a string.
* Add tests.
* Warn if RETURN cannot be parsed.
* Adjust tests. Also test for warning.
* if -> elif (otherwise EXAMPLE will be parsed too).
* Always parse return documentation, and fail if it is invalid YAML.
* Polishing.
* Mostly re-enable ansible-doc tests.
Listing from the local collection seems to be somewhat broken. I assume this
is why the test was disabled.
* Lint and make tests work with Python 2.
* Keep FQCNs in plugins (not modules), i.e. restore previous state.
* use security_fix category in changelogs for CVEs
* these fragments do not say CVE but are security fixes
Co-authored-by: Alicia Cozine <acozine@users.noreply.github.com>
* Support removed_at_date in ansible-doc
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
Changes:
* ansible-doc does not support `removed_at_date` and assumes that
deprecated dict will either have `removed_in` or `version`. This
results in ansible-doc (and hence "sanity --test=ansible-doc")
failing for modules having only `removed_at_date`.
* This patch adds support for `removed_at_date` and also gives it
precedence over `removed_in` or `version`.
* Add tests and changelog
Signed-off-by: NilashishC <nilashishchakraborty8@gmail.com>
