The earlier-recommended "pat1:pat2:pat3[x:y]" notation doesn't work well
with IPv6 addresses, so we recommend ',' as a separator instead. We know
that commas can't occur within a pattern, so we can just split on it.
We still have to accept the "foo:bar" notation because it's so commonly
used, but we issue a deprecation warning for it.
Fixes#12296Closes#12404Closes#12329
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
Hi @amenonsen - thanks for fixing up the hunting down the unicode bug and expanding test_addresses. The code looks good, merging!-- Be systematic about parsing and validating hostnames and addresses
These used to go in vars_cache, so merging them in after that as they
are "live" variables and the user would most likely want to see these
above anything else.
Labels must start with an alphanumeric character, may contain
alphanumeric characters or hyphens, but must not end with a hyphen.
We enforce those rules, but allow underscores wherever hyphens are
accepted, and allow alphanumeric ranges anywhere.
We relax the definition of "alphanumeric" to include Unicode characters
even though such inventory hostnames cannot be used in practice unless
an ansible_ssh_host is set for each of them.
We still don't enforce length restrictions—the fact that we have to
accept ranges makes it more complex, and it doesn't seem especially
worthwhile.
This adds a parse_address(pattern) utility function that returns
(host,port), and uses it wherever where we accept IPv4 and IPv6
addresses and hostnames (or host patterns): the inventory parser
the the add_host action plugin.
It also introduces a more extensive set of unit tests that supersedes
the old add_host unit tests (which didn't actually test add_host, but
only the parsing function).
There was code to support set literals (on Python 2.7 and newer), but it
was buggy: SAFE_NODES.union() doesn't modify SAFE_NODES in place,
instead it returns a new set object that is then silently discarded.
I added a unit test and fixed the code. I also changed the version
check to use sys.version_tuple instead of a string comparison, for
consistency with the subsequent Python 3.4 version check that I added in
the previous commit.
Two things changed in Python 3.4:
- 'basestring' is no longer defined, so use six.string_types
- True/False are now special AST node types (NamedConstant) rather than
just names
(Good thing we had tests, or I wouldn't have noticed the 2nd thing!)
I found only one place where safe_eval() is called inside the ansible
codebase: in lib/template/__init__.py. The call to safe_eval(result,
...) is protected by result.startswith('...'), which means result cannot
possibly be a byte string on Python 3 (or startswith() would raise, so
six.string_types (which excludes byte strings on Python 3) is fine here.
PyYAML has a SafeRepresenter in lib/... that defines
def represent_unicode(self, data):
return self.represent_scalar(u'tag:yaml.org,2002:str', data)
and a different SafeRepresenter in lib3/... that defines
def represent_str(self, data):
return self.represent_scalar('tag:yaml.org,2002:str', data)
so the right thing to do on Python 3 is to use represent_str.
(AnsibleUnicode is a subclass of six.text_type, i.e. 'str' on Python 3.)
needed for winrm, disabled closing connections in ssh to avoid issues with that persistance, need to normalize all this in future
This reverts commit 23a22397bf.
Required some rewiring in inventory code to make sure we're using
the DataLoader class for some data file operations, which makes mocking
them much easier.
Also identified two corner cases not currently handled by the code, related
to inventory variable sources and which one "wins". Also noticed we weren't
properly merging variables from multiple group/host_var file locations
(inventory directory vs. playbook directory locations) so fixed as well.
This was commented out earlier because of the lack of interprocess
locking and prepare_writeable_dir in v2.
The locking was not needed: it could only protect against other siblings
of this process (since they were all locking a temporary file that was
opened in the parent), and those would be running as the same user and
with the same umask. Also, os.makedirs() tolerates intermediate paths
being created by other processes. For any other kind of error, both
locking and non-locking code paths would fail in the same way.
So all we really need to do is make sure we have write permissions.
(We also move the cp_dir handling code to where we actually set the
ControlPath ourselves; if the user has set it via ssh_*args already,
we don't need to bother.)
commit 9921bb9d20
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:19:44 2015 +0530
Document --ssh-extra-args command-line option
commit 8b25595e7b
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 13:24:57 2015 +0530
Don't disable GSSAPI/Pubkey authentication when using --ask-pass
This commit is based on a bug report and PR by kolbyjack (#6846) which
was subsequently closed and rebased as #11690. The original problem was:
«The password on the delegated host is different from the one I
provided on the command line, so it had to use the pubkey, and the
main host doesn't have a pubkey on it yet, so it had to use the
password.»
(This commit is revised and included here because #11690 would conflict
with the changes in #11908 otherwise.)
Closes#11690
commit 119d032389
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 11:16:42 2015 +0530
Be more explicit about why SSH arguments are added
This adds vvvvv log messages that spell out in detail where each SSH
command-line argument is obtained from.
Unfortunately, we can't be sure if, say, self._play_context.remote_user
is obtained from ANSIBLE_REMOTE_USER in the environment, remote_user in
ansible.cfg, -u on the command line, or an ansible_ssh_user setting in
the inventory or on a task or play. In some cases, e.g. timeout, we
can't even be sure if it was set by the user or just a default.
Nevertheless, on the theory that at five v's you can use all the hints
available, I've mentioned the possible sources in the log messages.
Note that this caveat applies only to the arguments that ssh.py adds by
itself. In the case of ssh_args and ssh_extra_args, we know where they
are from, and say so, though we can't say WHERE in the inventory they
may be set (e.g. in host_vars or group_vars etc.).
commit b605c285ba
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Tue Aug 11 15:19:43 2015 +0530
Add a FAQ entry about ansible_ssh_extra_args
commit 49f8edd035
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:48:50 2015 +0530
Allow ansible_ssh_args to be set as an inventory variable
Before this change, ssh_args could be set only in the [ssh_connection]
section of ansible.cfg, and was applied to all hosts. Now it's possible
to set ansible_ssh_args as an inventory variable (directly, or through
group_vars or host_vars) to selectively override the global setting.
Note that the default ControlPath settings are applied only if ssh_args
is not set, and this is true of ansible_ssh_args as well. So if you want
to override ssh_args but continue to set ControlPath, you'll need to
repeat the appropriate options when setting ansible_ssh_args.
(If you only need to add options to the default ssh_args, you may be
able to use the ansible_ssh_extra_args inventory variable instead.)
commit 37c1a5b679
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:42:30 2015 +0530
Allow overriding ansible_ssh_extra_args on the command-line
This patch makes it possible to do:
ansible somehost -m setup \
--ssh-extra-args '-o ProxyCommand="ssh -W %h:%p -q user@bouncer.example.com"'
This overrides the inventory setting, if any, of ansible_ssh_extra_args.
Based on a patch originally by @Richard2ndQuadrant.
commit b023ace8a8
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:06:19 2015 +0530
Add an ansible_ssh_extra_args inventory variable
This can be used to configure a per-host or per-group ProxyCommand to
connect to hosts through a jumphost, e.g.:
inventory:
[gatewayed]
foo ansible_ssh_host=192.0.2.1
group_vars/gatewayed.yml:
ansible_ssh_extra_args: '-o ProxyCommand="ssh -W %h:%p -q bounceuser@gateway.example.com"'
Note that this variable is used in addition to any ssh_args configured
in the [ssh_connection] section of ansible.cfg (so you don't need to
repeat the ControlPath settings in ansible_ssh_extra_args).
* When iterating over a child state, a failure should be propagated
up so parent blocks don't continue iterating
* Make sure a child state exists before trying to search it
Fixes#12210
I don't think six.iteritems is available here, but I also don't expect
there to be enough platforms to ever make the speed difference between
.items() and .iteritems() noticeable.
Replace .iteritems() with six.iteritems() everywhere except in
module_utils (because there's no 'six' on the remote host). And except
in lib/ansible/galaxy/data/metadata_template.j2, because I'm not sure
six is available there.
The lock file is (a temporary file) opened in the parent process, whose
open fd is inherited by the workers after fork, and passed down through
the PlayContext. Connection grows lock/unlock methods which can be used
by individual connection plugins.
Right now, we don't do any locking, but we still scan known_hosts files
twice per connection. That's completely unnecessary, and the proposed
solutions to the locking problem wouldn't need known_hosts scanning
anyway, so this code can go away.
In v1, a trailing newline was kept if the parameter was passed as key=value. If
the parameter was passed as yaml dict the trailing newline was
discarded. Since key-value and yaml dict were unified in v2 we have to
make a choice as to which behaviour we want. Decided that keeping trailing
newlines by default made the most sense.
Fixes#12200Fixes#12199
