* Add a porting guide entry for ansible_distribution facts
Switching away from platform.distro() will cause changes sometimes due
to the new code using new sources of information that may be out of sync
with the old ones. Just have to make people aware of that and also what
we are doing to mitigate it when appropriate.
* wordsmithed, added links for new distro backend
* Once cli args are parsed, they're constant. So, save the parsed args
into the global context for everyone else to use them from now on.
* Port cli scripts to use the CLIARGS in the context
* Refactor call to parse cli args into the run() method
* Fix unittests for changes to the internals of CLI arg parsing
* Port callback plugins to use context.CLIARGS
* Got rid of the private self._options attribute
* Use context.CLIARGS in the individual callback plugins instead.
* Also output positional arguments in default and unixy plugins
* Code has been simplified since we're now dealing with a dict rather
than Optparse.Value
Added examples in playbooks_error_handling doc for handlining
multiple conditions in changed_when and failed_when
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* fix order of dnf api operations so transactions don't fail
Previously dnf.base.fill_sack() was called before
dnf.base.update_cache() which apparently breaks dnf transaction
logic as per https://bugzilla.redhat.com/show_bug.cgi?id=1658694Fixes#49060
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog and test case
Signed-off-by: Adam Miller <admiller@redhat.com>
* Combine systemd units/unit-files output for service_facts
Fixes#47118
Previously we were only taking the output of `systemd units` which
would leave out information about the service units that were
disabled, static, masked, etc. Now we're aggregating the results so
that anything not active/inactive/dead at least is pulled as fact
data with it's state provided.
Signed-off-by: Adam Miller <admiller@redhat.com>
* provide state and status information about services
Fixes#45730
Signed-off-by: Adam Miller <admiller@redhat.com>
conn_limit type is set to 'int'. This will allow module to compare conn_limit with record value without type casting.
Fixes: #38118
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Without this modprobe always reports changed when modprobe-ing a builtin module.
With this, if a kernel module is a builtin, the modprobe module will:
- succeed (without incorrectly reporting changed) if ``state`` is ``present``;
- fail if ``state`` is ``absent``
The failure will have whatever error message modprobe returns when
attempting to remove a builtin module. For example:
``modprobe: ERROR: Module nfs is builtin.``
* Handle 'latest' version when installing module for first time
Otherwise, a fresh install of a plugin with 'version: latest' gets installed without its dependencies, rendering the plugin effectively useless.
* Add changelog
* Refactor integration test for lvg module to introduce grow/reduce test
* List correctly current PV in lvg module: fix lvg reduce
Previous behaviour was to only take into account PV passed in 'pvs'
argument. This lead to reduce not working as expecting:
* with state=present and list of wanted pvs, lvg found only the pvs to
add or already present and ignored the pv to remove (obviously absent
from the list of given PV)
* with state=absent and a pv to remove, lvg found that the remaining pvs
list is empty (ignoring possible other PV in the vg) and decides to
remove the vg entirely (as supposely no PV are left anymore to store
lvm metadata)
* Add changelog fragment
When the security group the rule belongs to does not exist and
the state is absent, the module is not properly exited, leading
to a playbook execution failure.
Fixes issue #50057
* Added organization in the scm_credential get
* Fallback looking for cred in project org
* Tests project with multi org credential
* Fixed CI issue
* Added changelog fragment
* Change test suite to fit expected behaviour
This reverts some changes from ansible/ansible@723daf3
If a line is found in the file, exactly or via regexp matching, it must
not be added again.
insertafter/insertbefore options are used only when a line is to be
inserted, to specify where it must be added.
* Implement the change in behaviour mentioned in the previous commit
* Fix comment to reflect what the code does
* Set the correct return message.
In these cases, the lines are added, not replaced.
* Add a changelog
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
* Windows Privileges - moved util code to it's own C# util
* Rename Enabler class to PrivilegeEnabler to remove ambiguity
* rename Utils to PrivilegeUtil
* fix missing util name changes
* win become: refactor and add support for passwordless become
* make tests more stable
* fix up dep message for Load-CommandUtils
* Add further check for System impersonation token
* re-add support for become with accounts that have no password
* doc fixes and slight code improvements
* fix doc sanity issue
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* Fix various bugs related in reboot
- Use format strings for consistency and improve debug log messages
- Use local variables instead of class attributes in order to be thread safe
- Run setup module to get distribution and version
- Run find module to get full path of shutdown command
- Use ansible_os_family and ansible_distribution to find commands and args
- Use same command for all Solaris/SunOS distributions
- Move delay calculations to properties
- Reliably check for module run failure
- Fix bug in run_test_command() that accidentally made the method work properly
- Use better exceptions rather than Exception
- Use dict literals rather than constructors
- Correct _check_delay() so it always returns a value, not None
- Don't store and return result in run_test_command() because it's not used anywhere
- add test for post reboot command that fails
- test negative values for delay parameters
fixes to ansible-doc
- change json to always be type dependent
- change changelog generation to loop over the options
- warn about ignoring module path
* ensure idempotency for user set to None
* Update `user` documentation and add changelog fragment
* clarify changelog fragments and parameters documentation
* use restructuredtext syntax in changelog fragment
* Add info about loop based on jinja2 loop var
* ansible_loop
* Update test count
* Add extended loop_control that defines whether ansible_loop should be added
* Extended needs to be defaulted
* Revert "Update test count"
This reverts commit f1e93ee469825f4cdcd90fb28667d29aa088275c.
* Add docs about loop_control.extended
* Add revindex and revindex0
* Document ansible_loop in special vars
* Add changelog fragment
* Add tests, change items to allitems so that dot notation works, fix logic error with previtem
Incorporating the abandoned work from PRs #35288 and #45552. Also adding in
the version checking from `docker_container.py`, which should be abstracted
out to `docker_common.py`.
* fix py3 scope for unique filter errors, enable filters integration tests on rhel8 beta
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* Changed $IpAddress to $Gateway
* Tweaked win_route unit tests
Checks to see if new static route has the correct gateway
* Create win_route.yaml
* Fixed incorrect variable name
* Fix FactCache to conform to the dict API
* update needs to take a dict rather than a key and a value
* __init__ needs to allow for setting the intial dictionary
* Remove unneeded _display and _cache attributes
* Move ansible.plugins.cache.FactCache to
ansible.vars.fact_cache.FactCache because this isn't part of the cache
plugin API.
* Add backwards compatibility when calling update on the new FactCache
* Remove code for calling old FactCache. There's no way to call the old
FactCache so there's no need for backwards compatible code for calling
code. Backwards compatibility is handling things which are calling
the new FactCache.
* Port our code to the new FactCache location.
* Some types of 1Password items have a 'password' field alongside the 'fields' attribute, not inside it, so we need to search there as well.
* Add changelog fragement for onepassword_facts PR #47213.
* Fix for changes in clearlinux
clearlinux is now providing /etc/os-release file and ansible is identifying as NA
then this change allow ansible to find it
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add changelog fragment for clearlinux changes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add parameters to module vmware_guest for conversion of disk to thin or thick when vm is cloned or deployed with template
* unit test for convert clone vm
Co-Authored-By: chris93111 <christopheferreira@ymail.com>
* Fix win_nssm credentials quoting
Fix credential quoting for win_nssm after changes to the way nssm command is invoked in Ansible 2.7.1.
* Updating nssm command to update credentials to use Argv-ToString to properly escape password variable.
* Adding changelog fragment for fix of #48728.
* Add error message for k=v and YAML in a single task
Find the correct line, column, and position for k=v errors since they are different than the position reported initially.
Document bug in quoting syntax check.
* Change tense or error message
Since the error still exists, switch to present tense rather than past tense.
* Remove double spaces after periods in error messages.
http://www.slate.com/articles/technology/technology/2011/01/space_invaders.html
* Add changelog fragment
* Add tests for new error message
* Fix tests
* Add clarifying comments to unit test
* VMware: Fix module usages in module_utils
* Skip test for Python 2.6 as SSL context is not available in Python 2.6
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Implement test case prefix to filter test cases
* Cut line to not exceed 160 chars
* Replace tabs with spaces
* Add version_added field
* Include changelog file
* Support for pids_limit parameter in docker_container module
This add pids_limit parameter support in docker_container module
Fixes#43337
Signed-off-by: Akshay <akshay@localhost.localdomain>
* Add changelog for pids_limit parameter
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Remove unnecessary lines of code
The map is needed if the names are different.
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Update pids_limit option tests
It also run for docker-py < 1.10.0
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Only one exit point.
* Refactoring account handling.
* Add diff support for acme_account.
* Insert public_account_key into acme_account_facts result and into acme_account diff.
* Add changelog.
* require git when trying to use it in ansible-galaxy cli
Previously we weren't setting `required=True` when calling
`get_bin_path` and the path would return `None`, this would cause
a traceback when attempting to ' '.join() to create a string
representation of the failed command for error output
Fixes#49200
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* Don't check options for idempotency which are not supported.
This check should be superfluous if every option would adhere to
the convention that options not specified should have value None.
Unfortunately, some options (such as init) which correspond to
container properties have an explicit default set.
* Add append_hash functionality to k8s module
append_hash adds a hash based on the contents of a ConfigMap
or Secret to the name - this enables immutable ConfigMaps and
Secrets.
* Provide k8s_config_resource_name plugin
The k8s_config_resource_name filter plugin provides a means of determining
the name of ConfigMaps and Secrets created with append_hash
* Add changelog fragment
* fix failing tests
* Update openshift version needed for append_hash
* win_mapped_drive - refactor module and docs
* Updated code to work with become and split tokens
* use win_credential_manager instead of cmdkey
* updated credential manager module name
* harden the system token impersonation process
* Add difference tracking tool
* Improve --diff mode for docker_container.
* Improve diffs of sets by ordering the sets.
* Rewrite imports, get rid of HAS_DOCKER_PY_x variables and use docker_version instead.
* Rename container -> active (more generic).
* Add --diff for docker_volume. Change old diff output.
* Add --diff for docker_network. Change old diff output.
* Add --diff for docker_swarm_service.
* Add changelog.
* Add entry for porting guide on docker_network and docker_volume.
* port win-say to use CSharpUtil AnsibleBasic and add warning when requested voice not found
* win_say: fixes following code review: use C# style properties consistently; prefix changelog fragments
* fix invalid yaml in change log fragment
* win_say: fixes following code review: use generic module parameter validation where possible
* remove redundant setting of Result.changed to false, simplified some logic for readability.
* fix serialisation issue when message text is drawn from a file; allows tests to be run not in check mode and fix up some test descriptions
* Provide Kubernetes resource validation to k8s module
Use kubernetes-validate to validate Kubernetes resource
definitions against the published schema
* Additional tests for kubernetes-validate
* Improve k8s error messages on exceptions
Parse the response body for the message rather than returning
a JSON blob
If we've validated and there are warnings, return those too - they
can be more helpful
```
"msg": "Failed to patch object: {\"kind\":\"Status\",\"apiVersion\":\"v1\",\"metadata\":{},
\"status\":\"Failure\",\"message\":\"[pos 334]: json: decNum: got first char 'h'\",\"code\":500}\n",
```
vs
```
"msg": "Failed to patch object: [pos 334]: json: decNum: got first char 'h'\nresource
validation error at spec.replicas: 'hello' is not of type u'integer'",
```
* Update versions used
In particular openshift/origin:3.9.0
* Add changelog for k8s validate change
* -Change: Include dependency role names in `role_names`.
-Add: `play_role_names` magic variable to include only explicitly named roles (formerly `role_names`).
-Add: `dependent_role_names` magic variable to include all dependency names for all roles.
* -Change: use the ansible_ prefix for new magic variables.
-Change: keep `role_names` as a deprecated variable, using the old functionality.
* -Add: changelog fragment for the role_names rework.
* -Add: Tests for the role_names (and ansible_*role_names) special variables
* -Fix: resolve erroneous documentation snippet that was introduced after rebasing.
* -Fix: explicitly sort to ensure list comparison works in test.
* Fix tests: use same command if not testing command option.
* Fix idempotency of init option.
* Fix shm_size idempotency (it is included in inspect results from docker API version 1.22 on).
* Add changelog.
* clarify port.mode paramter requiremets, fail if unmet
* changelog fragment
* shorten too long line
* remove unnecessary indentation
* test version on docker_version for better maintainability
* normalize imports
* changelog fragment: minor_changes -> bugfixes
* rollback e96a7e57dfefd566fa47cf465a759637affd4795
* typo
Co-Authored-By: dariko <dariko@users.noreply.github.com>
* fix tagged implicit gathering
- None is not tHe default anymore, its an empty list
* Update changelogs/fragments/fix_taggged_gather.yml
Co-Authored-By: bcoca <bcoca@users.noreply.github.com>
* Simplify logic and add FreeBSD & NetBSD
* Remove incorrect flag for lock and unlock on FreeBSD
* Add tests and changelog
Co-authored-by: Chris Gadd <gaddman@email.com>
PIP package names must be case insensitive, and must consider hyphens
and underscores to be equivalent
(https://www.python.org/dev/peps/pep-0426/#name), because of this the
module didn't work correctly in check mode. For example if the passed
package name had a different case or an underscore instead of a hyphen
(or the other way around) compared to the installed package, check mode
reported as changed, even though packages were installed. Now the module
ignores case and hyphens/underscores in package names, so check mode
works correctly.
* Always use /proc/sys/kernel/random/boot_id to confirm reboot on Linux
/proc/sys/kernel/random/boot_id is available since kernel 2.3.16 and
should be safe to rely on.
The previously used method by checking the system boot time using who -b
turned out to be unreliable: Some systems lacking an RTC report the Unix
epoch as boot time, but the code trying to detect that did't always
work.
Closes#46562
* Change DEFAULT_BOOT_TIME_COMMAND
- change to usinsg /proc by default
- add BOOT_TIME_COMMANDS for BSD, Solaris, and macOS
* win_update: Add post search category matching to support product matching
* win_updates: Return categories of each update
* win_updates: Documentation fix-up
* win_updates: Adjusted documentation to reflect regex vs sub-string match of post-cat strings
* win_updates: Sped up post-category checking
* win_updates: Updated documentation to suggest querying post-category strings
* win_updates: Simplified saving and checking post-categories
* fixed some issues and added filtered categories to return value
* win_updates: Moved all category matching to occur after initial search
* win_updates: Adjustments to satisfy PowerShell lint checks
* win_updates: Dropped category validation from action plugin
* win_updates: Documentation updates
* win_updates: Fixed plugin unit tests
* Added basic equivalent to PowerShell modules
* changes based on latest review
* Added tests
* ignore sanity test due to how tests are set up
* Changes to work with PSCore
* Added documentation and change updated more modules
* Add some speed optimisations to AddType
* fix some issues in the doc changes
* doc changes
* yum also parse obsolete package output
This is a rebase of the patch originally proposed in
https://github.com/ansible/ansible/pull/40001 by machacekondra
Fixes#39978
Signed-off-by: Adam Miller <admiller@redhat.com>
* properly parse the obsoletes, provide a new output entry, add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* make pep8 happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove q debugging output
Signed-off-by: Adam Miller <admiller@redhat.com>
* First pass at a toml inventory
* Make EXAMPLES yaml
* Remove unnecessary comment
* Small formatting changes
* Add ansible-inventory option to list as TOML
* TOML inventory improvements, to allow a more simple inventory, specifically related to children
* changelog
* Simplify logic
* Dedupe _expand_hostpattern, making it available to all inventory plugins
* Don't make the TOML inventory dependent on the YAML inventory
* Quote IP address values
* Add more TOML examples
* Further cleanups
* Enable the toml inventory to run by default
* Create toml specific dumper
* 2.8
* Clean up imports
* No toml pygments lexer
* Don't raise an exception early when toml isn't present, and move toml to the end, since it requires an external dep
* Require toml>=0.10.0
* Further clean up of empty data
* Don't require toml>=0.10.0, but prefer it, add code for fallback in older versions
* Ensure we actually pass an encoder to toml.dumps
* Simplify recursive data converter
* Appease tests, since we haven't limited controller testing to 2.7+
* Update docstring for convert_yaml_objects_to_native
* remove outdated catching of AttributeError
* We don't need to catch ImportError when import ansible.plugins.inventory.toml
* Add note about what self.dump_funcs.update is doing
* Address some things
* A little extra comment
* Fix toml availability check
* Don't create an intermediate list
* Require toml file extension
* Add metadata
* Remove TOML docs from intro_inventory to prevent people from getting the wrong idea
* It's in defaults, remove note
* core supported, indicate very clearly that this is preview status
* Allow bang and exclamation without warning
Allow the password field to be ! or * without warning when using this feature to create accounts that are locked.
Add documentation and tests to cover this.
* Use set() rather than braces for Python 2.6
* Correct yum and dnf autoremove behavior
Sanity check args passed to autoremove
Fixes#47184
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix docs
Signed-off-by: Adam Miller <admiller@redhat.com>
* Store parsed docker-py / docker API versions in client.
* Began refactoring 'minimal required version' for docker_container options.
* Removing some fake defaults.
* Added changelog.
* Improve tests (check older docker versions).
* Fix comparison. The breaking point is not docker-py 2.0.0, but 1.10.0.
(Verified by testing with these versions.)
* Move docker-py/API version detection to setup_docker.
* Add YAML document starter.
* docker_network requirement for docker-py was bumped to 1.10.0 in #47492.
Handle exception when there is no snapshot available in virtual machine or template while cloning using vmware_guest.
Fixes: #47920
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Support for device read write limit parameters
* Add following options in docker_container module
- device_read_bps
- device_write_bps
- device_read_iops
- device_write_iops
Fixes#36831
* test for device_read_iops
* combined test for device_write_bps and device_write_iops
Don't fail when policy, requestPayment, tagging or versioning API is not
implemented by the endpoint and if related parameters policy, requester_pays,
tags or versioning are None.
* cleanup is already tested.
* Add test for paused.
* Add recreate and restart tests.
* timeout is a common docker option
* Implement paused and fix paused test.
* Add changelog.
* Improve paused test.
* New v2_runner_on_start callback added to indicate the start of execution for a host in a specific task
* Add changelog fragment
* Minor docstring clarification
* Parsing plugin filter may raise TypeError, gracefully handle this exception
and let user know about the syntax error in plugin filter file.
* Test for plugin_filtering
Fixes: #46658
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* docker_image: Fix up 'changed' event in force mode
This is the same as https://github.com/ansible/ansible/pull/19235 except it applies to all image-building modes (building the image locally, loading the image from an archive, or pulling the image), rather than only when pulling the image.
* Use 'dummy' rather than '_' as unused variable name.
* Add changelog fragment for pull request #33754
* integration test for docker_swarm_service
* ensure stack de-initialization
* Set default value for 'configs' parameter to None
Docker-py uses None as a default value for configs.
Using the same default here allows to create services on older docker
setups (docker_api<1.30).
* Set default value for 'update_order' parameter to None
Docker-py uses None as a default value for update_order.
Using the same default here allows to create services on older docker
setups (docker_api<1.29)
* Set default value for 'publish.mode' parameter to None
Docker-py uses None as a default value for publish_mode.
Using the same default here allows to create services on older docker
setups (docker_api<1.32)
* Allow tests to run on older version of docker.
* remove workarounds for old docker versions
* test correct swarm cleanup
* changelog fragment for docker_swarm_service defaults change
* Add support for POST-as-GET if GET fails with 405.
* Bumping ACME test container version to 1.4. This includes letsencrypt/pebble#162 and letsencrypt/pebble#168.
* Also use POST-as-GET for account data retrival.
This is not yet supported by any ACME server (see letsencrypt/pebble#171),
so we fall back to a regular empty update if a 'malformedRequest' error is
returned.
* Using newest ACME test container image.
Includes letsencrypt/pebble#171 and letsencrypt/pebble#172, which make Pebble behave closer to the current specs.
* Remove workaround for old Pebble version.
* Add changelog entry.
* First try POST-as-GET, then fall back to unauthenticated GET.
* Don't die when get_container is called for container which is terminating during get_container call.
If it terminates between client.containers() and client.inspect_container(),
the module will fail with an error such as
Error inspecting container: 404 Client Error: Not Found ("No such container: xxx")
* Add changelog.
* Add Support of healthcheck in docker_container module
Fixes#33622
Now container can be started with healthcheck enabled
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Extend docker_container healthcheck (#1)
* Allowing to disable healthcheck.
* Added test for healthcheck.
* Make sure correct types are used.
* Healthcheck needs to be explicitly disabled with test: ['NONE'].
* pep8 fixes
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Fix bug if healthcheck interval is 1 day or more
`timedelta` object has days too and seconds are up to one day.
Therefore use `total_seconds()` to convert time into seconds.
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Add test for healthcheck when healthcheck is not specified
This is to avoid the situation when healthcheck is not specified and
treat this as healthcheck is changed or removed.
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Convert string syntax for healthcheck test to CMD-SHELL
Also add another test case to check idempotency when healthcheck test
is specified as string
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Playbook fails if minimun docker version is not satisfy for healthcheck
This is to make more consistent with other non-supported options.
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* WinRM/PSRP: Ensure shell returns UTF-8 output
This PR makes UTF-8 output work in PSRP shells.
* Add win_command and win_shell integration tests
* Fix tests
* more test fixes
* Behave better if auto_remove and output_logs are combined. Warn if output cannot be retrieved because of auto_remove.
* Add tests.
* Added changelog.
This reverts commit 0e933f76ba.
The tests for this were broken on centos6 because jinja2 does not have
a map filter on that platform. Tests need to be rewritten
* Fix AWS EC2 inventory plugin caching of groups
* Added changelog fragment for aws_ec2 caching fix
* Store the AWS query results
The underlying inventory object contains inventory from other sources,
so caching it as ours would be wrong.
It seems easiest and safest to just cache the boto query results
instead.
* Remove unused functions
* Add runtime option to docker_container module
Signed-off-by: Antoine Bardoux <abardoux@nvidia.com>
* Add changelog fragment
Signed-off-by: Antoine Bardoux <abardoux@nvidia.com>
* Add idempotency test for docker_container.runtime
Signed-off-by: Antoine Bardoux <abardoux@nvidia.com>
This should provide a startup time speed boost at the expense of making
it harder to get ansible to use newer versions of packages than are
provided by the platform.
* reboot: Add timeout in error to help troubleshooting
So we've been hit by 'Timed out waiting for boot_time check' and it was
unclear what timeout was used for the boot_time check. By adding the
timeout value it is easier to understand the used value, and verify if a
change to the timeout is reflected in the output.
* Add changelog fragment
* removed hardcoded loader/plugins list
* updated a few errors to keep orig object
* fix httpapi/cliconf listing
* ansible-doc fixes
* show undocumented as UNDOCUMENTEd
* added missing undoc
* An earlier optimization of ansible-doc -l caused failures.
The optimization quickly searches the plugin code for short_description
fields and then uses that in the -l output. The searching was a bit too
naive and ended up pulling out malformed yaml. This caused those
plugins to be omitted from the list of plugins of that type with
a warning that their documentation strings were wrong.
This change makes the documentation parser aware that the documentation
string could have a relative indent for all of its fields which makes it
robust in the face of this particular problem.
* Don't search for space after short_description:
Any whitespace would be valid. In particular newline
Python sets the SIGPIPE handler to SIG_IGN. On execv() signal handlers are
reset to their defaults, EXCEPT those that are SIG_IGN which are left ignored.
In Python 3 subprocess.popen explicitly resets the SIGPIPE handler to SIG_DFL,
but unfortunately in Python 2.7 it does not. This leads to subprocesses being
executed with SIGPIPE ignored. This is often a problem with bash scripts which
rely on SIGPIPE to terminate commands in a pipe, but can easily be a problem
with other applications.
This implements the Python 3 behaviour for Python 2.7 by using a preexec_fn.
* Locate prtdiag even when absent from /usr/bin
On Solaris 8 hosts, this prevents fact collection from aborting with:
Argument 'args' to run_command must be list or string
* Lint fix.
* Style: pass /usr/platform/.../sbin as optional path to get_bin_path().
* allow update_cache as stand alone operation for yum/dnf
Fixes#40068
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* Add chdir support to win_package
* Add chdir support to uninstall too.
* Update docs to account for uninstall.
* Correct variable substitution for hashtable.
* added changelog fragment
* Allow to specify images by hash for docker_container and docker_image_facts.
* flake8
* More sanity checks.
* Added changelog.
* Added test.
* Make compatible with Python < 3.4.
* Remove out-commented imports.
* Don't simply ignore container in present() if image is not specified.
* Use image from existing container for recreation if not specified.
* Added changelog.
* Improve comment.
* macports: Replace update_ports with selfupdate
- Macports discourages use of `port sync` and recommends using `port
selfupdate` instead.
- Keep `update_cache` and `update_ports` as aliases.
- No longer require the `name` parameter so that `selfupdate` can be
used in a task by itself.
* macports: Add upgrade parameter
- New upgrade parameter which can be used to upgrade all outdated ports.
* Add changelog fragment
* win_exec: refactor PS exec runner
* more changes for PSCore compatibility
* made some changes based on the recent review
* split up module exec scripts for smaller payload
* removed C# module support to focus on just error msg improvement
* cleaned up c# test classifier code
* fix callback Plugin json to support global stat set by set_stats module
* refactor to not break compatiblity, add trailing comma on output dict
* Remove sorted, as it not needed
* refactor, to sivels better code
* clean some code messup
* add changelog fragment
* added missing new line
* fix pep8 stuff
* docker_container: Honour stop_timeout when creating docker containers (#43814)
* Adjusting description to what actually happens.
See docker-py changelog for 2.7.0: 'APIClient.stop will
no longer override the stop_timeout value present in the
container’s configuration.'
* Add a test whether stop_timeout can be configured for the container.
* Added changelog.
* Integrate with comparisons (by default, ignore stop_timeout value for restarts; will be configurable with PR ansible/ansible#44789).
* Fix config change code and tests (#2)
* Improving wildcard test.
* Using correct config.
This prevents a stack trace in Python 3 when the result is an empty file since
the file is open in binary mode and a native string in Python 3 is str,
not bytes.
The stdout and stderr values returned from self._low_level_execute() are text, not bytes. This results in an error in Python 3 since str and bytes cannot be concatenated.
Changing to unicode type allows this to work without error on Python 2 and Python 3.
* Ensure that the value of PLUGIN_FILTERS_CFG is treated as type=path, and that we use the standard section of 'defaults' instead of 'default'
* deprecate the default section
* Don't add version_added for the corrected section
* Sorting args.
* Doing comparisons of options with container parameters in a more context-sensitive way.
This prevents unnecessary restarts, or missing restarts (f.ex. if parameters are removed from ``cmd``).
* Make blkio_weight work.
* Fix cap_drop idempotency problem.
* Making groups idempotent if it contains integers.
* Make cpuset_mems work.
* Make dns_opts work.
* Fixing log_opts: docker expects string values, returns error for integer.
* Adding tests from felixfontein/ansible-docker_container-test#2.
* Make uts work.
* Adding changelog entry.
* Forgot option security_opts.
* Fixing typo.
* Explain strict set(dict) comparison a bit more.
* Improving idempotency tests.
* Making dns_servers a list, since the ordering is relevant.
* Making dns_search_domains a list, since the ordering is relevant.
* Improving dns_search_domains/dns_servers.
* Fixing entrypoint test.
* Making sure options are only supported for correct docker-py versions.
* fixes#45941
* corrects regression introduced by #26104; when the resource group doesn't exist, the module exits prematurely with an error instead of creating it.
* Ensure that the src file contents is converted to unicode in diff info. Fixes#45717
* Fix up and cleanup
* The diff functionality in the callback plugins should have the
to_text() calls removed since we're now doing it in ActionBase
* catching of UnicodeError and warnings in the callback diff
functionality from 61d01f549f haven't been
needed since we switched to to_text so remove them.
* Add a note to ActionBase's diff function giving an example of when the
diff function will be inaccurate and how to fix it
* Fix callback get_diff() tests
I believe the unittests of callback's get_diff() were wrong. They were
sending in a list where strings were expected. Because previous code
was transforming the lists into strings via their repr, the previous
tests did not fail but they would have formatted the test cases output
in an odd way if we had looked at it.
* win async: use async_dir for the async results file directory
* tried to unify POSIX and PowerShell async implementations of async_dir
* fix sanity issue
* Fix targets that may be a list containing strings and lists which worked prior to 2.6.
* Add ec2_group integration tests for lists of nested targets
* changelog
* Add diff mode support for lists of targets containing strings and lists.
* win_script: add support for become and centralise exec wrapper builder
* satisfying the pep8 gods
* do not scan for module dependencies when running as a script
* expect ssh_key_data to be a string instead of path
ssh_key_data should be a string filled with the private key
the old behavior can be archived with a lookup
Fixes#45119
* clarifies ssh_key_data description, adds newline
* Add definitive to valid_simple_controls in pamd module
* Add changelog fragment for issue 44278
* Adjusted module name to not include path or extension
* Add elapsed return value to select modules
It can be quite useful to know exactly how much time has elapsed
downloading/waiting. This improves existing modules or updates
documentation.
* Ensure elapsed is always returned
* Added changelog fragment
* Add new session parameter to win_psexec
* Indicate which version the session option was added in
* Added changelog fragment and minor edit on doc entry
* YUM4/DNF compatibility via yum action plugin
DNF does not natively support allow_downgrade as an option, instead
that is always the default (not configurable by the administrator)
so it had to be implemented
- Fixed group actions in check mode to report correct changed state
- Better error handling for depsolve and transaction errors in DNF
- Fixed group action idempotent transactions
- Add use_backend to yum module/action plugin
- Fix dnf handling of autoremove (didn't used to work nor had a
default value specified, now does work and matches default
behavior of yum)
- Enable installroot tests for yum4(dnf) integration testing, dnf
backend now supports that
- Switch from zip to bc for certain package install/remove test
cases in yum integration tests. The dnf depsolver downgrades
python when you uninstall zip which alters the test environment
and we have no control over that.
- Add changelog fragment
- Return a pkg_mgr fact if it was not previously set.
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
* Switch to LiteralPath instead of Path. Closes#44508
* add changelog fragment
* fix line endings and remove final empty line
* Minor text changes in changelog
* elb_application_lb: fix dangerous default of deleting an ELB if state is omitted by changing state to default to present to be more like other AWS modules
* expend checksum format to <algorithm>:(<checksum>|<url>)
* continue to code at office
* ALPHA - expend checksum format to <algorithm>:(<checksum>|<url>)
* clean up tmpfile and comment
* try to add test code for 27617
* try to add test code for 27617
* try to add test code for 27617
* try to fix [Could not find or access 'testserver.py']
* fix test code [Could not find or access 'testserver.py']
* fix test code [add files dir]
* fix test code [files dir not exists]
* as [connection was closed before a valid response was received]
* [connection was closed before a valid response was received]
* [connection was closed before a valid response was received]
* add test item [sha1 and sha256]
* since [connection was closed before a valid response was received]
* fix [connection was closed before a valid response was received]
* fix test code typo
* add docs for #27617
* PR #43751 is minor change
* fix pep8 issue.
* fix test code style.
* fix unexpected quote
* Add (preview) diff mode support ec2_group
* Add diff mode to some ec2_group integration tests
* Remove unnecessary arguments and add comment to the module notes
* Add changelog
In python 3.7.0, changes in `ssl.py` breaks `smtplib.SMTP_SSL`, which
then breaks `mail` module in ansible.
Run this line in python shell:
import smtplib;smtplib.SMTP_SSL().connect(host='smtp.gmail.com', port=465)
Before python 3.7.0, we will get:
(220, b'smtp.gmail.com ESMTP j13-v6sm3086685pgq.56 - gsmtp')
In python 3.7.0, we get such error at `lib/python3.7/ssl.py` line 843, method `_create`:
ValueError: server_hostname cannot be an empty string or start with a leading dot.
The ssl module is using host info on SMTP_SSL instance, which is not set.
The fix/workaround is simple, just pass host info to it:
import smtplib;smtplib.SMTP_SSL(host='smtp.gmail.com').connect(host='smtp.gmail.com', port=465)
Fixes: #44550
Signed-off-by: Guo Qiao <guoqiao@gmail.com>
Extends `module_defaults` by adding a prefix to defaults `group/` which denotes a builtin list of modules. Initial groups are: `group/aws`, `group/azure`, and `group/gcp`
