The networking API v2 specification, which is implemented
by openstack neutron, features an optional MTU parameter that
allows operators to specify the value for the maximum
transmission unit value.
* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
All vmware_guest_* module support for use_instance_uuid from Ansible 2.8,
somehow vmware_guest_disk missed from this change.
This fix adds support for use_instance_uuid in vmware_guest_disk.
Fixes: #56021
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
* nxos_snmp_user: platform fixes for get_snmp_user
snmp user output behavior varies quite a bit for the different nxos platforms and required several workarounds:
- N5K/N6k
- These platforms do not support structured output for `show snmp user`.
- The current code lands in an `except` clause when the output is not structured; so I added a new `get_non_structured_snmp_user` method to scrape the state from the regular cli output if it's present.
- N9K-F
- The `group` data in the JSON output is different for this platform; it has a different key (just `group` instead of `TABLE_groups` or `group_names`) and it is not indexed
- For a single group the value is a string, for multiple groups it's a list
- sanity
- N5K/N6K/N9K-F platforms will reject `no snmp user <name> <role>` when it's the last role defined for the user.
- workaround is to use `nxos_user` to remove the user
- Changes validated on:
- `N3K, N3K-F, N35, N6K, N7K, N9K, N9K-F`
- `6.0(2)A8`
- `7.0(3)I2, 7.0(3)I4, 7.0(3)I5, 7.0(3)I6, 7.0(3)I7`
- `7.3(2)D1`
- `7.3(3)N1, 7.3(4)N1`
- `8.3(2)`
- `9.2(2), 9.2(3)`
* fix lint warning
With the example, the `file_result.folderPath` of the file
does not have any trailing '/'. `target_folder_path` is correctly
generated and equal: `[nfs_1] images`.
As described in #53385 (and #31759), the docker connection driver did
not support privilege escalation. This commit is a shameless
cut-and-paste of the privilege escalation support from the `local`
connection plugin into the `docker` plugin.
Closes: #53385
Aggregate delete task will fail in case it has hosts within the aggregate.
As by the OpenStack, the hosts should be removed from the aggregate
prior aggregate delete.
Add remove host in case provided.
* use navigate_value instead navigate_hash
* add async wait method
* update dict compare
* remove unuse methods
* not all modules have timeouts parameter
* navigate_value, the input data may be None
* Same api client can be used for other service as well
* Incorporated Review comments. Modified Category and Guest Fact modules which are also dependent on vmware_rest_client module util
* Adding Integration Tests for vmware_rest_client changes
* Changes to incroporate changes in vcsim testware
* Change to get vm name to attach the tag
* Alter tests to pass
* Change diff_against to make changed work again
* Add another diff_against
* Expose supports_sessions across all EOS connection types
* Change session warning to failure
* supports_sessions needs to be a method to survive the rpc boundary
* Alter tests to match
* sysctl will now return an error if the value is invalid
sysctl can fail to set a value even if it returns an exit status 0. More
details: https://bugzilla.redhat.com/show_bug.cgi?id=1264080. Because of
this in case of an invalid value or a read-only file system, sysctl
module would return OK, even though it didn't set anything. To be sure
that sysctl correctly applied the changes we also need to check the
output of stderr.
* Run sysctl with LANG=C
Because we are parsing sysctl stderr we need to make sure that errors
are persistent across different system language settings.
* Add changelog fragment for sysctl
* remove deprecated get_md5 from stat
fixes#55309
* removed get_md5 from tests involving stat
* keep get_md5 but hide it
* rst it
* ammended comment
* ws
* added ignore for hidden md5
* Make ansible adhoc work with include_role
Fix logic condition so that include_role works
without
```
ERROR! 'async_val' is not a valid attribute for a IncludeRole
The error appears to be in 'None': line 0, column 0, but may
be elsewhere in the file depending on the exact syntax problem.
(could not open file to display line)
```
* Add include_role test for adhoc
* XenServer: Minor changes and fixes in xenserver_guest
- xenserver_guest module: ignore wait_for_ip_address when
state=absent (fixes#55348). Module docs are updated to reflect this.
- xenserver_guest module: show proper error message when maximum number
of network interfaces is reached and multiple network interfaces are
added at once (fix for changes introduced in #54697).
- xenserver_guest module: fixed a bug in reconfigure() where VM would
be powered off even though check mode is used when reconfiguration
needs VM to be powered off.
* Added changelog fragment
mem_reservation and memory_reservation has redundant implementation.
Combining them together.
Fixes: #54335
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* remove external grep call and parse with python
* use function for repeated code
* use module.get_bin_path() for iscsiutil on HPUX
* some code opt for HPUX
* clean up non-module code, module being defined is a requirement for this code
* import get_bin_path() directly and use without module prefix
* Add integration tests for AIX and HP-UX
* add changelog fragment
* Apply suggestions from code review
Co-Authored-By: mator <matorola@gmail.com>
* Apply suggestions from code review #2
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove strict requirement on executable to exist for get_bin_path() as
it will allow facts gathering to continue without an error. Almost all
other files under facts do not have "required=True" (except 2 files,
which should be probably fixed). And check return value for
get_bin_path() , before run attempt.
* add check for AIX lsattr run_command return code
The ACI MultiSite PATCH API has a deficiency requiring some objects to be referenced by index.
This can cause silent corruption on concurrent access when changing/removing on object as
the wrong object may be referenced.
This PR removes some references by index, and documents this issue for
others.
* nxos_snmp_traps: fix 'group: all' for N35 platforms
- `group: all` attempts to enable traps for all features defined in the module's `feature_list`
- `N35` platforms do not support `snmp-server enable traps bfd`; so removing `bfd` from the `feature_list` for that platform
- Minor cleanup in `sanity.yaml` test file
* whitespace lint fix
<!--- Your description here -->
The arguments for certificate, private_key and password are marked as required in the ArgumentSpec, but not in the documentation.
+label: docsite_pr
* Fixes Netconf_config single parameter bug
Fixes 56022
fixed get_config to not require multiple parameters to just run a backup
* Add Integration test for netconf_config
Associated with #56022
tests backup through netconf only using one parameter.
* Added debug to the begin and end of file
* Fix formatting of save config. #56022
* removed blank line at end: #56022
* Update include_role description to discuss tasks: use
The previous description in this statement's description really threw me off, and is IMO ambiguous at best. 'Loads and executes a role as a task dynamically. This frees roles from the roles: directive and allows them to be treated more as tasks.'
For reference, I spent a long time trying to make include_role, with a loop, work under a roles: section. It doesn't work, but this documentation and its use of the roles: keyword in the opening, and the phrase '"more" as a task' muddies the waters.
+label: docsite_pr
* add vmware_evc_mode module
* alter result message for absent/absent
* Apply suggestions from code review
Co-Authored-By: CastawayEGR <36353334+CastawayEGR@users.noreply.github.com>
* add idempotency test
* change result dict to evc_mode_msg
* refactor to use pyvmomi class
* fix update to only process task on update
* minimize update code
* add single quotes around vars to match other code
* pass datacenter to cluster find
* add check_mode to disable test
Make a small documentation cleanup for the package_facts module to use
the current YAML style and remove unnecessary quotes around `auto`.
Signed-off-by: Major Hayden <major@redhat.com>
When `vmware_datastore_facts` does not fine any datastore, it raises an error.
This is not consistent with the other _facts modules. It should just return
an empty list instead.
In a multi-host context, `changed_list` will record all the changes
done on any host. So as soon as ONE host is changed, it will be `True`.
A host can potentially already have a parameter set, in this case
`change_option_list` will be empty.
This commit uses `change_option_list` instead of `changed_list` to
decided if a given host should be updated.
* Fix loading namespaced doc_fragments
The syntax for specifying a different fragment name was already
using '.' as a separator, so the code needed to be tweaked to
avoid choking on names like `testns.testcoll.fragname` and
`testns.testcoll.fragname.altvar`.
`get_plugin_class()` returns 'docfragment' for the fragment loader;
mangling `subdir` provides consistent alignment with the normal plugin
directory names and avoids needing special handling of plugin types
with 'module' in the name.
* Add changelog entry
* Modified vcenter_license to accept vSAN license and assign to
the given cluster.
* review comments
Fixes: #55711
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add GetBootOverride as possible Systems command
* Add conditional to call get_boot_override if command == GetBootOverride
* Implement get_boot_override() in redfish_utils
* Implement get_multi_boot_override() and modify get_boot_override() to support the multi wrapper
* Update GetBootOverride to use get_multi_boot_override
* Add example for new command in docstring
* fix indent
* Update lib/ansible/module_utils/redfish_utils.py
Co-Authored-By: xmadsen <xander.madsen@gmail.com>
* Add GetChassisPower as viable Chassis command in redfish_facts
* Add conditional to catch command == 'GetChassisPower'
* Implement get_chassis_power() retrieving Watts-related and other useful power data from each Chassis
* Add RelatedItem property and remove MemberId property
* Check for length of data['PowerControl'] to be > 0 before checking index 0 of the list.
* Fix return statement being inside loop and result key not being 'entries' as is expected
* Update lib/ansible/module_utils/redfish_utils.py
Co-Authored-By: xmadsen <xander.madsen@gmail.com>
* Update lib/ansible/module_utils/redfish_utils.py
Co-Authored-By: xmadsen <xander.madsen@gmail.com>
* Update redfish_facts.py
The `nxos_vlan` module may raise with regex error `sre_constants.error: multiple repeat` in the non_structured codepath if the device has existing vlan names with certain regex control characters; e.g.
```
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Eth1/3
14 my-vlan-name-is-*** active
```
* `nxos_acl` may fail with `IndexError: list index out of range` while attempting to delete a non-existent ACL.
The failure occurs when the `acl` var is an empty list.
* nxos_acl: catch 501 'Structured output unsupported' when no ACLs present
With some older image versions, `show ip access-list | json` will raise a 501 error indicating `'Structured output unsupported'` when there are no access-lists configured. This change turns off the `check_rc` and then looks for the failure condition.
* Fix kwarg
* Fix lint issues
* Add new method to encode parameters in the URL
- I'm not really encoding, I'm sure this is broke
- There maybe an Ansible native way to do this
* Fix whitepace
* Added urlencode support
- Relies on urllib module
- Fixed string delimiter
* Enable URL params
- construct_params_list() creates a list of parameters to encode
- encode_url_params() does encoding in a simple manner
* Added proper methods for urlencoding
* Remove duplicate functions
* Remove blank line for PEP8
* add multi-node manipulation, delete on xpath match only and count capability to win_xml
* fix pep8 and yamllint errors identified by ci tests
* fixed bugs when handling multiple elements, multiple attribute nodes and handling for attribute nodes when using xpaths that only select attributes like //@lang. Added more tests and tweaked documentation.
* fixed line-too-long error
* fixed trailing space errors
* trailing whitespace expunged
* bump version_added to 2.9 for new changes
* fix PSAvoidUsingPositionalParameters sanity check failure
* refix sanity check as it broke the msg return value
* Check variables are defined before using combine filter
* Add tests for the combine filter
* Remove dependencies that should already be installed
* relocate the function to recursively check for undefined vars
add another test
* changelog
* Add GetSupportedFirmwareUpdateMethods to update category commands list
* Add condition when command == GetSupportedFirmwareUpdateMethods to call the forthcoming rf_utils function get_supported_firmware_update_methods
* Implement get_supporte_firmware_update_methods() in redfish_utils
* rename command to GetFirmwareUpdateCapabilities
* rename comand get_firmware_update_capabilities()
* Rename command get_firmware_update_capabilities()
* Group update protocols by the type of Action they are associated with.
* remove trailing whitespace
* Use safer method to get 'title' for each action type and its allowablevalues
* Add example to docstring for using GetFirmwareUpdateCapabilities
* fix line too long
* fix line too long and trailing whitespace
* Update redfish_utils.py
* remove trailing whitespace
* fix overindent
* Use self.update_uri instead of hard-coding '/redfish/v1' in get_firmware_update_capabilities()
* Add GetChassisThermals command to Chassis list
* Add GetChassisThermals conditional and point to rf_utils.get_chassis_thermals() function
* Implement get_chassis_thermals() in redfish_utils
* Remove trailing whitespace
* Add more properties, including RelatedItem tto distinguish entries' contexts from each other.
* Remove trailing whitespace
* Add custom action class for version info
* Use args from CLI as prog for ArgumentParser object
* Make prog a required parameter of create_base_parser() and update all uses to pass in the newly required parameter.
* Add unit test for checking ansible --version
* Update other related unit tests
The bare minimum example in the docs (i.e. only supplying name, state, and cluster) results in the error `state is present but all of the following are missing: task_definition, desired_count`.
The current code was not properly checking for the active state when
checking any_errors_fatal, so if the error occurred in a sub-block
or included file it is not properly detected.
Fixes#55515
* Support using importlib on py>=3 to avoid imp deprecation
* Add changelog fragment
* importlib coverage for py3
* Ansiballz execute should use importlib too
* recursive module_utils finder should utilize importlib too
* don't be dumb
* Fix up units
* Clean up tests
* Prefer importlib.util in plugin loader when available
* insert the module into sys.modules
* 3 before 2 for consistency
* ci_complete
* Address importlib.util.find_spec returning None
* prevents accidental templating on intra-action postprocessing of an untrusted module result
* makes the view of a module result within an action consistent with the way it would be stored for future use (eg facts, register)
* Make module not get all nets every time it's executed with net_id
* Add changelog fragment
* Update changelogs/fragments/meraki_static_route_api_calls.yml
Co-Authored-By: kbreit <kevin.breit@kevinbreit.net>
If more than one user-assigned identity is assigned to a host, then an identifier is required to specify which credentials are retrieved. This change uses the existing support for client_id to retrieve the user-assigned identity by client_id.
##### SUMMARY
<!--- Your description here -->
The documentation dictates the values are strings. but the examples don't show this.
This can be confusing for new people.
##### ISSUE TYPE
- Docs Pull Request
+label: docsite_pr
* Start of migration to argparse
* various fixes and improvements
* Linting fixes
* Test fixes
* Fix vault_password_files
* Add PrependAction for argparse
* A bunch of additional tweak/fixes
* Fix ansible-config tests
* Fix man page generation
* linting fix
* More adhoc pattern fixes
* Add changelog fragment
* Add support for argcomplete
* Enable argcomplete global completion
* Rename PrependAction to PrependListAction to better describe what it does
* Add documentation for installing and configuring argcomplete
* Address rebase issues
* Fix display encoding for vault
* Fix line length
* Address rebase issues
* Handle rebase issues
* Use mutually exclusive group instead of handling manually
* Fix rebase issues
* Address rebase issue
* Update version added for argcomplete support
* -e must be given a value
* ci_complete
-Add: Test cases for ansible_parent_role_names and ansible_parent_role_paths
-Add: ansible_parent_role_names/paths variables for when a role is being included by another role.
Ensure inventory plugin loading rel to play
fixes#51033
* clarify paths
* now adding dirs funciton in loader
* better warnings
* each cli should handle adding dirs depending on context
* Solaris WWN parsing cosmetic fix (commit 924f5b5467)
* simplify module.run_command by removing use_unsafe_shell and remove calling of external grep
* add changelog fragment
* Use module_utils.compat.ipaddress where possible.
* Simplify reverse pointer computation.
* Use dummy for unused variables.
* Remove from ignore list.
* Adjust fix.
* Fix text handling for Python 2.
* Add changelog.
* - initial commit for the modules and tests
* initial implementation based on ec2_asg
* docstring implemtation and further methods initial implementation
* refactoring and pylint changes
* further implementation and integration tests
* added examples and parameter documentation
* removed files that were essentially templates
* added waiter for delete and updated the tests
* removed unit test
* fixed pep8 failure
* fixed pep8 failure
* fixed pep8 password field issue
* fixed pep8 password field issue
* fixed syntax issues
* fixed pep8 defaults
* password property documentation was breaking yaml
* fixed pep8 defaults
* fixed lack of defaults for wait parameter
* added default to boolean parameter
* pep8 fix
* fixed author entry
* adding type to wait parameter
* adding type to wait parameter
* fixed linting issues
* updated description and removed default from docs
* added metaclass
changed default for boolean
* changed declared defaults
* - fixe the delete function
- solved the yaml syntax issue
* added missing defaults for timeout, retry and removed the one for endpointtype as it should be None, becasue parameter is Required anyway
* fixed RETURN documentation issue
* trying to fix the import placement error
* trying to fix the doc error for missing params
* pep8 issues
* added endpoint aliases
* - added documentation
* pep8
* changed to unsupported tag
* changed no_log fact to yes in the integration tests
* added suggested changes to the integration tests
* - making severname use resource_prefix as well as a more generic domain
- removing test fact
Check return value of FindByInventoryPath API which is used for
finding desired folder to deploy OVF.
Fixes: #54823
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix channel joining for some IRC servers.
Some IRC servers may return the channel in a different case than
requested. For instance, you might request "foo" but the server
returns "FOO". The regular expression matching must be case-insensitive
for the join response in order to handle this.
* ansible style guidelines want spaces
In addition to using creating container using image
aliases, containers can also be created using
fingerprints, provided that the playbook author provide
alternate values for 'server', 'protocol' and swap out
'alias' for 'fingerprint'.
+label: docsite_pr
* General test improvements.
* Adjust tests to older docker-py versions.
* docker_swarm_server_info: work around problems with older docker-py versions
* Bump minimal docker-py version for options network_filters and disk_usage.
* More general test improvements.
* Correct usage of docker_image.
* Put files into output directory.
* Speed up test.
* Remove old check.
* Update ce.py
while to_text(out, errors='surrogate_then_replace').strip().endswith(']'):
display.vvvv('wrong context, sending exit to device', self._play_context.remote_addr)
conn.exec_command('return')
out = conn.get_prompt()
connetion has no send_command function and ce device has no 'exit' command to return user-view(a correct context),but 'return' .command.
* Add files via upload
Some bugs fix.
* Add files via upload
fix some bugs
* fix a bug for ce_command
Running a command with prompt via ce_command, It doesn't work.The reason is that the key word for network_cli recognition is answer not response.
* fix bugs
fix bugs for ce modules
* Update ce.py
* Delete ce_ftp.py
need modify
* Delete ce_lacp.py
* Add files via upload
* Delete ce_aaa_server.py
* Delete ce_aaa_server_host.py
* Compatible with Python 3
Compatible with Python 3 and fix bugs for ce
* Update ce_aaa_server.py
* Add files via upload
modify doc
* Add files via upload
Compatible with Python 3 and fix bugs
* Add files via upload
Compatible with Python 3 and fix bugs
* Add files via upload
Cancellation of change
* Update ce_netconf.py
It is a bug that response has no xml attribute:line 183
* Add files via upload
* Add files via upload
Compatible with Python 3 and fix bugs
* updatp ce_config.py
a bug for this module.
* Version in deprecate calls should be a string. Fixes#55312. Fixes#55313. Fixes#55314. Fixes#55315. Fixes#55316. Fixes#55317.
* Add changelog fragment
The k8s plugin expects the "connections" field to be a list - current docs examples trigger:
[WARNING]: * Failed to parse {...}/inventory.yml with k8s plugin: Expecting connections to be a list.
Updated examples for `host` and `namespaces` to reflect this.
* Add test for generating a CSR with everything, and testing idempotency.
* Proper SAN normalization before comparison.
* Fix check in cryptography backend.
* Convert SANs to text. Update comments.
* Add changelog.
* Warn when log_options values are not strings.
* Add changelog.
* Improve message.
* Improve formatting and formulation of other messages.
* Add test for warning.
* Trying double escaping.
