corrected output from default callback
added new tests for no_log loops
updated makefile test to check for both positive and negative occurrences of no_log
The earlier code behaved exactly as though this default had been set,
but it was actually handled as a(n unnecessary) special case inside the
connection plugin, rather than set as an explicit default.
If the default is overriden either in ansible.cfg or the environment,
the new code will continue to work (in fact, it won't know or care,
since it just uses the value set in the PlayContext).
This is submitted as a separate commit for easier review to address
backwards-compatibility concerns.
Using set_host_overrides() in the connection plugin to access the ssh
argument variables from the inventory didn't see group_vars/host_vars
settings, as noted earlier. Instead, we can set the correct values in
the PlayContext, which has access to all command-line options, task
settings, and variables.
The only downside of doing so is that the source of the settings is no
longer available in ssh.py, and therefore can't be logged. But the code
is simpler, and it actually works.
This change was suggested by @jimi-c in response to the FIXME in the
earlier commit.
Now we have the following ways to set additional arguments:
1. [ssh_connection]ssh_args in ansible.cfg: global setting, prepended to
every command line for ssh/scp/sftp. Overrides default ControlPersist
settings.
2. ansible_ssh_common_args inventory variable. Appended to every command
line for ssh/scp/sftp. Used in addition to ssh_args, if set above, or
the default settings.
3. ansible_{sftp,scp,ssh}_extra_args inventory variables. Appended to
every command line for the relevant binary only. Used in addition to
#1 and #2, if set above, or the default settings.
3. Using the --ssh-common-args or --{sftp,scp,ssh}-extra-args command
line options (which are overriden by #2 and #3 above).
This preserves backwards compatibility (for ssh_args in ansible.cfg),
but also permits global settings (e.g. ProxyCommand via _common_args) or
ssh-specific options (e.g. -R via ssh_extra_args).
Fixes#12576
<crab> jimi|ansible: do you think it should be possible to add both
foo:22 and foo:23 to the inventory?
<jimi|ansible> no
…so we don't want an invitation to FIXME.
CLI already provides a pager() method that feeds $PAGER on stdin, so we
just feed that the plaintext from the vault file. We can also eliminate
the redundant and now-unused shell_pager_command method in VaultEditor.
(Reminder: cannot use six here, module_utils get shipped to remote
machines that may not have six installed -- besides six doens't support
Python 2.4.)
Since c8f2483d, ini.py expects to always be passed in a pre-created list
of groups, and can no longer deal sensibly with an empty list; this just
makes that expectation clear.
This fixes a corner case where ini files live in a subdir
of the main inventory directory.
Reproducing the original error:
mkdir -p inventory/ini
cat > inventory/ini/hosts << EOF
[www]
www1
EOF
$ ansible -i inventory/ all -m ping
ERROR! 'all'
(or without the [www] group, it would complain about 'ungrouped')
Fixes another failing test.
(I don't want to do a global search/replace for 'basestring' because I
want to have unit tests covering each occurrence. When I run out of
existing failing tests, I'll try to write new ones.)
* Remove extraneous imports
* Fix some error handling
* Enable pipelining
* Disable su since it doesn't work
* Add error message when installed docker is not recent enough to
support this plugin
* Move nested functions to class level
* Make transport a class attribute
* Make exec_command, put_file and fetch_file more robust
Removed deletion of salt param from lookup file by 'password' lookup_filter.
Old behaviour leads to constant changed status when two tasks uses same lookup,
one with 'encrypt' parameter, and other without.
For example:
tasks:
- name: Create user
user:
password: "{{ lookup('password', inventory_dir + '/creds/user/pass' ncrypt=sha512_crypt) }}"
...
# Lookup file 'creds/user/pass' now contain password with salt
- name: Create htpasswd
htpasswd:
password: "{{ lookup('password', inventory_dir + '/creds/user/pass') }}"
...
# Salt gets deleted from lookup file 'creds/user/pass'
# Next run of "Create user" task will create it again and will have 'changed' status
* Disable su as it's not currently working 100% (and was disabled in v1).
* Move BUFSIZE out of the class to match other conenction plugins
* _connect shouldn't return self.
This is also peripheral to what _build_command needs, can be improved
and tested independently, and so makes more sense in a separate method.
This commit doesn't change any functionality (and I've verified that it
works with the various combinations: control_path set in ansible.cfg,
ssh_args adding or not adding ControlMaster/ControlPersist, etc.).
SSH pipelining can be a significant performance improvement, but it will
not work if sudoers is configured to requiretty. With this change, one
could have pipelining enabled in ansible.cfg, but use sudo to turn off
requiretty in a separate play (or task) where pipelining is disabled:
- hosts: foo
vars:
ansible_pipelining: no
tasks:
- lineinfile: dest=/etc/sudoers line='Defaults requiretty' state=absent
sudo_user: root
(Note that sudoers has a complicated syntax, so the above lineinfile
invocation may be too simplistic for production use; but the point is
that a separate play can do something to disable requiretty.)
Also get pipelining working for people who look to chroot as an example
for their own connection plugins
Note: In the latest v2 API, action handles become but chroot doesn't
reliably handle become. Maybe we need to add a has_become attribute
that the action can display an appropriate error.
* allow global no_log setting, no need to set at play or task level, but can be overriden by them
* allow turning off syslog only on task execution from target host (manage_syslog), overlaps with no_log functionality
* created log function for task modules to use, now we can remove all syslog references, will use systemd journal if present
* added debug flag to modules, so they can make it call new log function conditionally
* added debug logging in module's run_command
Due to the way we're now calculating delegate_to, if that value is based
on a loop variable ('item') we need to calculate all of the possible
delegated_to variables for that loop.
Fixes#12499
There doesn't appear to be anything that actually uses tmp_path in the
connection plugins so we don't need to pass that in to exec_command.
That change also means that we don't need to pass tmp_path around in
many places in the action plugins any more. there may be more cleanup
that can be done there as well (the action plugin's public run() method
takes tmp as a keyword arg but that may not be necessary).
As a sideeffect of this patch, some potential problems with chmod and
the patch, assemble, copy, and template modules has been fixed (those
modules called _remote_chmod() with the wrong order for their
parameters. Removing the tmp parameter fixed them.)
The process is already gone, so there's not going to be any new data
showing up on its stderr; we only want to make sure that we haven't
missed something that was already written. So polling once is enough.
This change is motivated by an ssh oddity: when ControlPersist is
enabled, the first (i.e. master) connection goes into the background; we
see EOF on its stdout and the process exits, but we never see EOF on its
stderr. So if we ran a command like this:
ANSIBLE_SSH_PIPELINING=1 ansible -T 30 -vvv somehost -u someuser -m command -a whoami
We would first do select([stdout,stderr], timeout) and read the command
module output, then select([stdout,stderr], timeout) again and read EOF
on stdout, then select([stderr], timeout) AGAIN (though the process has
exited), and select() would wait for the full timeout before returning
rfd=[], and then we would exit. The use of a very short timeout in the
code masked the underlying problem (that we don't see EOF on stderr).
It's always preferable to call select() with a long timeout so that the
process doesn't use any CPU until one of the events it's interested in
happens (and then select will return independent of elapsed time).
(A long timeout value means "if nothing happens, sleep for up to <x>";
omitting the timeout value means "if nothing happens, sleep forever";
specifying a zero timeout means "don't sleep at all", i.e. poll for
events and return immediately.)
This commit uses a long timeout, but explicitly detects the condition
where we've seen EOF on stdout and the process has exited, but we have
not seen EOF on stderr. If and only if that happens, it reruns select()
with a short timeout (in practice it could just exit at that point, but
I chose to be extra cautious). As a result, we end up calling select()
far less often, and use less CPU while waiting, but don't sleep for a
long time waiting for something that will never happen.
Note that we don't omit the timeout to select() altogether because if
we're waiting for an escalation prompt, we DO want to give up with an
error after some time. We also don't set exceptfds, because we're not
actually acting on any notifications of exceptional conditions.
On Python 2, shlex.split() raises if you pass it a unicode object with
non-ASCII characters in it. The Ansible codebase copes by explicitly
converting the string using to_bytes() before passing it to
shlex.split().
On Python 3, shlex.split() raises ('bytes' object has no attribute 'read')
if you pass a bytes object. Oops.
This commit introduces a new wrapper function, shlex_split, that
transparently performs the to_bytes/to_unicode conversions only on
Python 2.
Currently I've only converted one call site (the one that was causing a
unit test to fail on Python 3). If this approach is deemed suitable,
I'll convert them all.
Without this, we could execute «ssh -q ...» and call select(), which
would timeout after the default 10s, and only then send initial data.
(This is a relic of the earlier change where we always ran ssh with
-vvv, so the situation where it would sit quietly never happened in
practice; but this would have been the right thing to do even then.)
Make the code compatible with Pythons 2.4 through 3.5 by using
sys.exc_info()[1] instead.
This is necessary but not sufficient for Python 3 compatibility.
The event loop (even after it was brought into one place in _run in the
previous commit) was hard to follow. The states and transitions weren't
clear or documented, and the privilege escalation code was non-blocking
while the rest was blocking.
Now we have a state machine with four states: awaiting_prompt,
awaiting_escalation, ready_to_send (initial data), and awaiting_exit.
The actions in each state and the transitions between then are clearly
documented.
The check_incorrect_password() method no longer checks for empty strings
(since they will always match), and check_become_success() uses equality
rather than a substring match to avoid thinking an echoed command is an
indication of successful escalation. Also adds a check_missing_password
connection method to detect the error from sudo -n/doas -n.
The main exec_command/put_file/fetch_file methods now _build_command and
call _run to handle input from/output to the ssh process. The purpose is
to bring connection handling together in one place so that the locking
doesn't have to be split across functions.
Note that this doesn't change the privilege escalation and connection IO
code at all—just puts it all into one function.
Most of the changes are just moving code from one place to another (e.g.
from _connect to _build_command, from _exec_command and _communicate to
_run), but there are some other notable changes:
1. We test for the existence of sshpass the first time we need to use
password authentication, and remember the result.
2. We set _persistent in _build_command if we're using ControlPersist,
for later use in close(). (The detection could be smarter.)
3. Some apparently inadvertent inconsistencies between put_file and
fetch_file (e.g. argument quoting, sftp -b use) have been removed.
Also reorders functions into a logical sequence, removes unused imports
and functions, etc.
Aside: the high-level EXEC/PUT/FETCH description should really be logged
from ConnectionBase, while individual subclasses log transport-specific
details.
* Make LookupBase an abc with required methods (run()) marked as an
abstractmethod
* Mark methods that don't use self as @staticmethod
* Document how to implement the run method of a lookup plugin.
Follow up to 8769f03c, which allows the undefined var error to be raised
if we're getting vars with a full context (play/host/task) and the host
has already gathered facts. In this way, vars_files containing variables
that fail to be templated are not silently ignored.
This fixes a failing unit test.
In actual use (which is still quite far), I'm not sure if bytes ->
unicode conversion should be done here (in which case the code will fail
with an AttributeError: 'bytes' object has no attribute 'readlines'), or
inside self._connection.exec_command() (in which case my change is
correct).
Now, instead of relying on hostvars on the executor side, we compile
the vars for the delegated to host in a special internal variable and
have the PlayContext object look for things there when applying task/
var overrides, which is much cleaner and takes advantage of the code
already dealing with all of the magic variable variations.
Fixes#12127Fixes#12079
* Clearing interpreter settings from variables, so those set for the
original host aren't incorrectly applied to the delegated to host
* Fixed incorrect string for remote user in delegated hosts hostvars
* Properly looking for multiple possiblities in the delegated-to hosts
hostvars (ansible_ssh_host vs. ansible_host)
Use six.moves.range instead (aliased to xrange on Python 2, aliased to
range on Python 3).
Also I couldn't resist replacing the elaborate chr/ord/randrange dance
with the simpler random.choice(string.ascii_lowercase) that was already
used elsewhere in the Ansible codebase.
The earlier distinction was never used; .ipv6_address was always a copy
of .ipv4_address, and the latter was always used to set the remote_addr
field in the PlayContext.
Also uses the canonical ansible_host/ansible_port names when setting the
address and port from variables.
The earlier-recommended "pat1:pat2:pat3[x:y]" notation doesn't work well
with IPv6 addresses, so we recommend ',' as a separator instead. We know
that commas can't occur within a pattern, so we can just split on it.
We still have to accept the "foo:bar" notation because it's so commonly
used, but we issue a deprecation warning for it.
Fixes#12296Closes#12404Closes#12329
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
Hi @amenonsen - thanks for fixing up the hunting down the unicode bug and expanding test_addresses. The code looks good, merging!-- Be systematic about parsing and validating hostnames and addresses
These used to go in vars_cache, so merging them in after that as they
are "live" variables and the user would most likely want to see these
above anything else.
Labels must start with an alphanumeric character, may contain
alphanumeric characters or hyphens, but must not end with a hyphen.
We enforce those rules, but allow underscores wherever hyphens are
accepted, and allow alphanumeric ranges anywhere.
We relax the definition of "alphanumeric" to include Unicode characters
even though such inventory hostnames cannot be used in practice unless
an ansible_ssh_host is set for each of them.
We still don't enforce length restrictions—the fact that we have to
accept ranges makes it more complex, and it doesn't seem especially
worthwhile.
This adds a parse_address(pattern) utility function that returns
(host,port), and uses it wherever where we accept IPv4 and IPv6
addresses and hostnames (or host patterns): the inventory parser
the the add_host action plugin.
It also introduces a more extensive set of unit tests that supersedes
the old add_host unit tests (which didn't actually test add_host, but
only the parsing function).
There was code to support set literals (on Python 2.7 and newer), but it
was buggy: SAFE_NODES.union() doesn't modify SAFE_NODES in place,
instead it returns a new set object that is then silently discarded.
I added a unit test and fixed the code. I also changed the version
check to use sys.version_tuple instead of a string comparison, for
consistency with the subsequent Python 3.4 version check that I added in
the previous commit.
Two things changed in Python 3.4:
- 'basestring' is no longer defined, so use six.string_types
- True/False are now special AST node types (NamedConstant) rather than
just names
(Good thing we had tests, or I wouldn't have noticed the 2nd thing!)
I found only one place where safe_eval() is called inside the ansible
codebase: in lib/template/__init__.py. The call to safe_eval(result,
...) is protected by result.startswith('...'), which means result cannot
possibly be a byte string on Python 3 (or startswith() would raise, so
six.string_types (which excludes byte strings on Python 3) is fine here.
PyYAML has a SafeRepresenter in lib/... that defines
def represent_unicode(self, data):
return self.represent_scalar(u'tag:yaml.org,2002:str', data)
and a different SafeRepresenter in lib3/... that defines
def represent_str(self, data):
return self.represent_scalar('tag:yaml.org,2002:str', data)
so the right thing to do on Python 3 is to use represent_str.
(AnsibleUnicode is a subclass of six.text_type, i.e. 'str' on Python 3.)
needed for winrm, disabled closing connections in ssh to avoid issues with that persistance, need to normalize all this in future
This reverts commit 23a22397bf.
Required some rewiring in inventory code to make sure we're using
the DataLoader class for some data file operations, which makes mocking
them much easier.
Also identified two corner cases not currently handled by the code, related
to inventory variable sources and which one "wins". Also noticed we weren't
properly merging variables from multiple group/host_var file locations
(inventory directory vs. playbook directory locations) so fixed as well.
This was commented out earlier because of the lack of interprocess
locking and prepare_writeable_dir in v2.
The locking was not needed: it could only protect against other siblings
of this process (since they were all locking a temporary file that was
opened in the parent), and those would be running as the same user and
with the same umask. Also, os.makedirs() tolerates intermediate paths
being created by other processes. For any other kind of error, both
locking and non-locking code paths would fail in the same way.
So all we really need to do is make sure we have write permissions.
(We also move the cp_dir handling code to where we actually set the
ControlPath ourselves; if the user has set it via ssh_*args already,
we don't need to bother.)
commit 9921bb9d20
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:19:44 2015 +0530
Document --ssh-extra-args command-line option
commit 8b25595e7b
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 13:24:57 2015 +0530
Don't disable GSSAPI/Pubkey authentication when using --ask-pass
This commit is based on a bug report and PR by kolbyjack (#6846) which
was subsequently closed and rebased as #11690. The original problem was:
«The password on the delegated host is different from the one I
provided on the command line, so it had to use the pubkey, and the
main host doesn't have a pubkey on it yet, so it had to use the
password.»
(This commit is revised and included here because #11690 would conflict
with the changes in #11908 otherwise.)
Closes#11690
commit 119d032389
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 11:16:42 2015 +0530
Be more explicit about why SSH arguments are added
This adds vvvvv log messages that spell out in detail where each SSH
command-line argument is obtained from.
Unfortunately, we can't be sure if, say, self._play_context.remote_user
is obtained from ANSIBLE_REMOTE_USER in the environment, remote_user in
ansible.cfg, -u on the command line, or an ansible_ssh_user setting in
the inventory or on a task or play. In some cases, e.g. timeout, we
can't even be sure if it was set by the user or just a default.
Nevertheless, on the theory that at five v's you can use all the hints
available, I've mentioned the possible sources in the log messages.
Note that this caveat applies only to the arguments that ssh.py adds by
itself. In the case of ssh_args and ssh_extra_args, we know where they
are from, and say so, though we can't say WHERE in the inventory they
may be set (e.g. in host_vars or group_vars etc.).
commit b605c285ba
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Tue Aug 11 15:19:43 2015 +0530
Add a FAQ entry about ansible_ssh_extra_args
commit 49f8edd035
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:48:50 2015 +0530
Allow ansible_ssh_args to be set as an inventory variable
Before this change, ssh_args could be set only in the [ssh_connection]
section of ansible.cfg, and was applied to all hosts. Now it's possible
to set ansible_ssh_args as an inventory variable (directly, or through
group_vars or host_vars) to selectively override the global setting.
Note that the default ControlPath settings are applied only if ssh_args
is not set, and this is true of ansible_ssh_args as well. So if you want
to override ssh_args but continue to set ControlPath, you'll need to
repeat the appropriate options when setting ansible_ssh_args.
(If you only need to add options to the default ssh_args, you may be
able to use the ansible_ssh_extra_args inventory variable instead.)
commit 37c1a5b679
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:42:30 2015 +0530
Allow overriding ansible_ssh_extra_args on the command-line
This patch makes it possible to do:
ansible somehost -m setup \
--ssh-extra-args '-o ProxyCommand="ssh -W %h:%p -q user@bouncer.example.com"'
This overrides the inventory setting, if any, of ansible_ssh_extra_args.
Based on a patch originally by @Richard2ndQuadrant.
commit b023ace8a8
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:06:19 2015 +0530
Add an ansible_ssh_extra_args inventory variable
This can be used to configure a per-host or per-group ProxyCommand to
connect to hosts through a jumphost, e.g.:
inventory:
[gatewayed]
foo ansible_ssh_host=192.0.2.1
group_vars/gatewayed.yml:
ansible_ssh_extra_args: '-o ProxyCommand="ssh -W %h:%p -q bounceuser@gateway.example.com"'
Note that this variable is used in addition to any ssh_args configured
in the [ssh_connection] section of ansible.cfg (so you don't need to
repeat the ControlPath settings in ansible_ssh_extra_args).
* When iterating over a child state, a failure should be propagated
up so parent blocks don't continue iterating
* Make sure a child state exists before trying to search it
Fixes#12210
I don't think six.iteritems is available here, but I also don't expect
there to be enough platforms to ever make the speed difference between
.items() and .iteritems() noticeable.
Replace .iteritems() with six.iteritems() everywhere except in
module_utils (because there's no 'six' on the remote host). And except
in lib/ansible/galaxy/data/metadata_template.j2, because I'm not sure
six is available there.
The lock file is (a temporary file) opened in the parent process, whose
open fd is inherited by the workers after fork, and passed down through
the PlayContext. Connection grows lock/unlock methods which can be used
by individual connection plugins.
Right now, we don't do any locking, but we still scan known_hosts files
twice per connection. That's completely unnecessary, and the proposed
solutions to the locking problem wouldn't need known_hosts scanning
anyway, so this code can go away.
In v1, a trailing newline was kept if the parameter was passed as key=value. If
the parameter was passed as yaml dict the trailing newline was
discarded. Since key-value and yaml dict were unified in v2 we have to
make a choice as to which behaviour we want. Decided that keeping trailing
newlines by default made the most sense.
Fixes#12200Fixes#12199
dbd755e0 previously assigned the value to self._templar.environment.searchpath,
which is incorrect - it needs to be assigned to the environment.loader.searchpath
value instead.
Fixes#11931
This information was earlier shown only with ANSIBLE_DEBUG, but it's
extremely useful in a user context, especially with module invocations
with deeply nested args like the ec2_vpc/ec2 modules.
Closes#11680
The contributor's name on line 10 (originally line 7) includes a character
that the default Python encoding (ASCII) raises an error on when interpreting
the file.
Specifying the utf-8 encoding, as is done in other modules, resolves
the error.
The error being raised is
SyntaxError: Non-ASCII character '\xc3' in file /.../lib/ansible/module_utils/f5.py
on line 7, but no encoding declared; see http://www.python.org/peps/pep-0263.html
for details
Rewrite function `get_fqdn`. It returns fqdn for all kinds of urls now.
`add_git_host_key` determines whether a url is ssh and whether its host
key should be added.
FieldAttributes will now by default not be post_validated unless a flag
is set on them in the class, as a large number of fields are really there
simply to be inherited by Task/PlayContext and shouldn't be templated too
early.
The other (unrelated to the base issue) in #12084 is also fixed here, where
the roles field is loaded before vars/vars_files, meaning there are no vars
yet loaded in the play when the templating occurs.
Fixes#12084
You cannot call bytes(obj) to get a simple representation of obj on
Python 3! E.g. bytes(42) returns a byte string with 42 NUL characters
instead of b'42'.
Python has had automatic int-to-long promotion for a long long time now.
Even Python 2.4 does that automatically.
Python 3 drops support for the L suffix altogether.
This is based on some code from (closed) PR #7872, but reworked based on
suggestions by @abadger and the other core team members.
Closes#7872 by @darkk (hash_merge/hash_replace filters)
Closes#11153 by @telbizov (merged_dicts lookup plugin)
Now we issue a "Reading … from stdin" prompt if our input isatty(), as
gpg does. We also suppress the "x successful" confirmation message at
the end if we're part of a pipeline.
(The latter requires that we not close sys.stdout in VaultEditor, and
for symmetry we do the same for sys.stdin, though it doesn't matter in
that case.)
This allows the following invocations:
# Interactive use, like gpg
ansible-vault encrypt --output x
# Non-interactive, for scripting
echo plaintext|ansible-vault encrypt --output x
# Separate input and output files
ansible-vault encrypt input.yml --output output.yml
# Existing usage (in-place encryption) unchanged
ansible-vault encrypt inout.yml
…and the analogous cases for ansible-vault decrypt as well.
In all cases, the input and output files can be '-' to read from stdin
or write to stdout. This permits sensitive data to be encrypted and
decrypted without ever hitting disk.
Now that VaultLib always decides to use AES256 to encrypt, we don't need
this broken code any more. We need to be able to decrypt this format for
a while longer, but encryption support can be safely dropped.
Now we don't have to recreate VaultEditor objects for each file, and so
on. It also paves the way towards specifying separate input and output
files later.
It's unused and unnecessary; VaultLib can decide for itself what cipher
to use when encrypting. There's no need (and no provision) for the user
to override the cipher via options, so there's no need for code to see
if that has been done either.
This commit deprecates the earlier groupname[x-y] syntax in favour of
the inclusive groupname[x:y] syntax. It also makes the subscripting
code simpler and adds explanatory comments.
One problem addressed by the cleanup is that _enumeration_info used to
be called twice, and its results discarded the first time because of the
convoluted control flow.
The possibilities are complicated enough that I didn't want to make
changes without having a complete description of what it actually
accepts/matches. Note that this text documents current behaviour, not
necessarily the behaviour we want. Some of this is undocumented and may
not be intended.
The --new-vault-password-file option works the same as
--vault-password-file but applies only to rekeying (when
--vault-password-file sets the old password). Also update the manpage
to document these options more fully.
`if method in dir(self):` is very inefficient:
- it must construct a list object listing all the object attributes & methods
- it must then perform a O(N) linear scan of that list
Replace it with the idiomatic `if hasattr(self, method):`, which is a
O(1) expected time hash lookup.
Should fix#11981.
Apart from ansible-vault create, every vault subcommand is happy to deal
with multiple filenames, so we can check that there's at least one, and
make create check separately that there aren't any extra.
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
* Fixes hostvar serialization issue (#12005)
* Fixes regression in include_vars from within a role (#9498), where
we had the precedence order for vars_cache (include_vars, set_fact)
incorrectly before role vars.
* Fixes another bug in which vars loaded from files in the format of
a list instead of dictionary would cause a failure.
Fixes#9498Fixes#12005
Now we accept IPv6 addresses _with port numbers_ only in the standard
[xxx]:NN notation (though bare IPv6 addresses may be given, as before,
and non-IPv6 addresses may also be placed in square brackets), and any
other host identifiers (IPv4/hostname/host pattern) as before, with an
optional :NN suffix.
The new code parses INI-format inventory files in a single pass using a
well-documented state machine that reports precise errors and eliminates
the duplications and inconsistencies and outright errors in the earlier
three-phase parsing code (e.g. three ways to skip comments). It is also
much easier now to follow what decisions are being taken on the basis of
the parsed data. The comments point out various potential improvements,
particularly in the area of consistent IPv6 handling.
On the ornate marble tombstone of the old code, the following
inscription is one last baffling memento from a bygone age:
- def _before_comment(self, msg):
- ''' what's the part of a string before a comment? '''
- msg = msg.replace("\#","**NOT_A_COMMENT**")
- msg = msg.split("#")[0]
- msg = msg.replace("**NOT_A_COMMENT**","#")
- return msg
This change is similar to https://github.com/ansible/ansible/pull/10465
It extends the logic there to also support none types. Right now if you have
a '!!null' in yaml, and that var gets passed around, it will get converted to
a string.
eg. defaults/main.yml
```
ENABLE_AWESOME_FEATURE: !!null # Yaml Null
OTHER_CONFIG:
secret1: "so_secret"
secret2: "even_more_secret"
CONFIG:
hostname: "some_hostname"
features:
awesame_feature: "{{ ENABLE_AWESOME_FEATURE}}"
secrets: "{{ OTHER_CONFIG }}"
```
If you output `CONFIG` to json or yaml, the feature flag would get represented in the output
as a string instead of as a null, but secrets would get represented as a dictionary. This is
a mis-match in behaviour where some "types" are retained and others are not. This change
should fix the issue.
I also updated the template test to test for this and made the changes to v2.
Added a changelog entry specifically for the change from empty string to null as the default.
Made the null representation configurable.
It still defaults to the python NoneType but can be overriden to be an emptystring by updating
the DEFAULT_NULL_REPRESENTATION config.
first off, we add an oddly slow basic test of 10k item inventory
Before:
```
Ran 229 tests in 13.214s
OK
real 0m13.403s
user 0m12.106s
sys 0m1.155s
```
After:
```
Ran 230 tests in 21.328s
OK
real 0m21.516s
user 0m20.099s
sys 0m1.275s
```
since that seems like a bit long for the test to add to runtime, lets profile
`python -m cProfile -s time ./bin/ansible all -i test/units/inventory_test_data/huge_range --list-hosts`
Before:
```
1272607 function calls (1259689 primitive calls) in 8.497 seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function)
10000 4.393 0.000 4.396 0.000 __init__.py:395(_get_host)
20000 2.695 0.000 2.697 0.000 __init__.py:341(__append_host_to_results)
40369 0.113 0.000 0.113 0.000 {posix.lstat}
50006 0.102 0.000 0.153 0.000 __init__.py:1490(combine_vars)
40008 0.089 0.000 0.202 0.000 __init__.py:1546(_load_vars_from_path)
20195 0.088 0.000 0.088 0.000 {posix.stat}
10011 0.087 0.000 0.087 0.000 {posix.getcwd}
```
The top two lines are promising optimization targets
- populate Inventory's host cache more in _get_host, as we are looping
over all the groups anyways.
- eliminate duplicate check of whether we've already included a host
in the construction around __append_host_to_results we can infer
presence of a host in the results list implies the presence of its
name in the hostnames set, allowing us to only to the less expensive
of the two checks
After:
```
1252610 function calls (1239692 primitive calls) in 1.320 seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function)
40369 0.105 0.000 0.105 0.000 {posix.lstat}
50006 0.094 0.000 0.141 0.000 __init__.py:1490(combine_vars)
40008 0.081 0.000 0.184 0.000 __init__.py:1546(_load_vars_from_path)
10011 0.080 0.000 0.080 0.000 {posix.getcwd}
20195 0.074 0.000 0.074 0.000 {posix.stat}
10002 0.069 0.000 0.261 0.000 __init__.py:1517(load_vars)
```
* Speed up serialization of hostvars by simply using the internal
dictionary used for cached lookups
* Use blocking gets/puts on queues instead of spin locking
* Merge sequential implicitly created blocks
* now it uses -n to get immediate error if no password is supplied and one is needed,
this should fix the issue with sudo hanging waiting for input.
* made -k configurable, this can break changing become_users in play if left out,
but opens up the possiblity of OTP support.
This function takes a string like 'foo:bar[1:2]:baz[x:y]-quux' and
returns a list of patterns ['foo', 'bar[1:2]', 'baz[x:y]-quux'], i.e.
splits the string on colons that are not part of a range specification.
get_hosts → used externally, not changed
_get_hosts → _evaluate_patterns (takes a list, evaluates ! and &)
__get_hosts → _match_one_pattern (takes one pattern only, ignores !&)
This function takes a string like 'foo:bar[1:2]:baz[x:y]-quux' and
returns a list of patterns ['foo', 'bar[1:2]', 'baz[x:y]-quux'], i.e.
splits the string on colons that are not part of a range specification.
This was used earlier to implement serial, but that's now done using
restrict_to_hosts() (whose docstring is also suitably adjusted here)
and there are no more callers.
* A commen dict of keys has been defined, which we look in results returned from the API.
* self.returns dict can be use in subclass to extend this dict.
* Optionally the key name can be replaced with a new key name, often used to make the return keys identical to the arguments passed.
* Use new style class
