* added configurable dir for tree callback
- allows usage in playbooks
- also made errors more specific if bad dir is supplied
- ensure we expand paths
* docfix
Change:
- Now sends meta tasks to the task start callback
- Lets callback plugins opt-in to receiving implicit tasks
Test Plan:
- New integration tests
Tickets:
- Indirectly fixes#71007 by allowing custom callbacks with this data
Signed-off-by: Rick Elrod <rick@elrod.me>
skip_missing parameter in subelements lookup plugin is accepted from
inside the dictionary.
Fixes: #38182
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* check run state of current block only
* Add changelog and test
* Add test for issue 29047
* Fix for both tests
* blerg
* Change test messages
* fix tests
* Add multi-level block in rescue test case
* Add recursive rescue check and multi-level test
* Should probably run the new test
* ci_complete
* Merge new tests
* ci_complete
* Don't do conflict check on sdist and egg_info. Fixes#71279
* Add changelog
* adjust changelog PR link
Co-authored-by: Rick Elrod <rick@elrod.me>
* add warning about bdist_wheel
Co-authored-by: Rick Elrod <rick@elrod.me>
This would be a partial solution for #69364 in that the SHASUMS file can be downloaded and gpg verified but then used from the downloaded location to verify the get_url's file.
* Make checksum url parsing more explicit
Use urlsplit to test if the checksum string has a (currently tested and) supported url scheme.
* Fix whitespace
* Changelog fragment
* Added tests
* Fix typo in test setup
The message generated by systemctl has been updated in 9321e23c40, which requires a corresponding change in the systemd module.
In addition, this fixes the module when the SYSTEMD_OFFLINE environment variable is set.
* POC for supporting callback events that come from the worker
* linting fixes. ci_complete
* fix up units. ci_complete
* Try moving the sentinel put higher. ci_complete
* safeguards. ci_complete
* Move queue killing to terminate
* LINTING. ci_complete
* Subclass Queue, to add helper send_callback method
* Just use _final_q instead of adding another queue and thread
* Revert a few changes
* Add helper for inserting a TaskResult into the _final_q
* Add changelog fragment
* Address rebase issue
* ci_complete
* Add test to assert async poll callback from fork
* Don't use full path
* ci_complete
* Use _results_lock as a context manager
* Add new generic lock decorator, and use it with send_callback
* Revert "Change default file permissions so they are not world readable (#70221)"
This reverts commit 5260527c4a.
* Revert "Fix warning for new default permissions when mode is not specified (#70976)"
This reverts commit dc79528cc6.
* Ensure -k is set to delegated hosts without a pass
* Fix up some broken tests
* Update task_executor.py
one possible fix, the other is updating winrm to normalize on 'password' like the other connection plugins
* Add alias for winrm and fix incorrect assumption
* Make sure aliases are used for keyword options
* Conditionally run test if sshpass is present, fix sanity
Co-authored-by: Brian Coca <bcoca@users.noreply.github.com>
Change:
- Allow systems to declare multiple virt techs. For example if a system
is both a docker container, but virtualized on KVM, show both. If a
system is set up to run virtualbox and KVM VMs, show both.
- This is done by introducing new facts keys:
- virtualization_tech_guest
- virtualization_tech_host
- Backwards compatibility is preserved by keeping track of the previous
return-points and refusing to update those keys after we would have
returned, but now returning them at the end, so that the new keys can
accumulate their data.
Test Plan:
- Local
- CI
Tickets:
- Refs #66304
- Refs #17151
- Refs #17058
- Probably others
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix tty_ify bugs and refactor
* Move tty_ify() and supporting attributes to the DocCLI class as that's
the only thing using it.
* Add unittest for the code.
* Fix a bug where the substitution macros can be detected when they are
a part of another word.
* Add support for L(), R(), and HORIZONTALLINE which were added to the
website docs many years ago.
* Update test/units/cli/test_doc.py
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* add jinja2 global to reserved names
also allow expansion by additional context provided from caller
fixes#41955
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Use `chmod +a` in the fallback chain to allow MacOS to use ACLs to
allow an unprivileged user to become an unprivileged user.
Test Plan:
- CI, new tests
Tickets:
- Fixes#70648
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Add a parameter `read_whole_file` which allows for reading the whole
file when doing a `contains` regex search.
- This allows for (for example) matching a pattern at the very end of
a file.
Test Plan:
- New integration tests
Tickets:
- Fixes#63378
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously CachePluginAdjudicator#flush only removed entries from the
cache backend that it knew about by using them earlier. Now it calls
the underlying plugin's flush() method.
Test Plan:
- New unit tests
Tickets:
- Fixes#68770
Signed-off-by: Rick Elrod <rick@elrod.me>
* Strip spaces in module names in explicit actions
Change:
- When an action is called like "action: copy foo=bar", strip spaces
around the action name.
- This allows "action: copy foo=bar" to work as expected.
Test Plan:
- New integration tests
Tickets:
- Fixes#62136
Signed-off-by: Rick Elrod <rick@elrod.me>
Add integration tests for unarchiving as unprivileged user
Break tasks into separate files for easier reading and maintenance
Create a user by specifying a default group of 'staff' for macOS.
The user module does not actually remove the user directory on macOS,
so explicitly remove it.
Put the removal tasks in an always block to ensure they always run
Co-authored-by: Philip Douglass <philip.douglass@amadeus.com>
Co-authored-by: Sam Doran <sdoran@redhat.com>
The iso8601_micro and iso8601 facts incorrectly called now.utcnow(), resulting
in a new timestamp at the time it was called, not a conversion of the previously
stored timestamp.
Correct this by capturing the UTC timestamp once then calculating the local
time using the UTC offset of the current system.
* Use time.time() for getting the current time
* Convert from that stored epoch timestamp to local and UTC times
* Used existing timestamp for epoch time
* Add unit tests that validate the formate of the return value rather than an exact value since mocking time and timezone is non-trivial
Follow up to #70221
Related to #67794
CVE-2020-1736
When set_mode_if_different() is called with mode of 'None', ensure we issue
a warning about the change in default permissions.
Add integration tests to ensure the warning works properly.
* Fix tests
- actually use custom module 🤦♂️
- verify file permission on created files
- use remote_tmp_dir so we're ready for split controller
- improve test module so we can skip the call to set_fs_attributes_if_different()
- fix tests for CentOS 6
Change:
- Allow older git to verify tags again
- Enable verification tests everywhere, even if most of them only work
on newer git. Some of them work on older git and they test the --raw
parameter.
Test Plan:
- Re-enabled subset of git tests
Tickets:
- Fixes#64469
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Previously, we only showed that something would have changed, not what
would have changed. This allows us to show what will chang as well.
Test Plan:
- Local RHEL8 VM
- New integration tests
Tickets:
- Fixes#66132
Signed-off-by: Rick Elrod <rick@elrod.me>
* Also validate top-level version_added.
* Fix error code.
* Produce same version_added validation error in schema than in code (and stop returning it twice).
* Return correct error codes for invalid version_added for options and return values.
* Add changelog.
* Fix forgotten closing braket.
* Accept 'historical' for some top-level version_added.
* dnf: Add nobest option
* dnf: Fix indent, add nobest specifically to dnf not yum
* Add changelog for dnf: add nobest option
* dnf: Add nobest to yumdnf module argument_spec
* dnf: remove nobest from module paramaters in yumdnf.py
* dnf: Add test for nobest option
* dnf: Cleanup packages in nobest test at last
* dnf: Cleanup manually added repos in nobest test at last
* dnf: Remove dnf-plugins-core as well in nobest test
* dnf: Change nobest release version to 2.11
* Change changelog number according to change in PR number
* Change changelog number according to change in PR number
Change:
- On Linux, there are situations where a host might be a KVM host but
not have the kernel module enabled (it might be compiled in instead).
In these cases, /dev/kvm will still exist, and rather than reporting
NA, we should report that the host is a KVM host.
Test Plan:
- Local
Signed-off-by: Rick Elrod <rick@elrod.me>
* Change default file permissions so they are not world readable
CVE-2020-1736
Set the default permissions for files we create with atomic_move() to 0o0660. Track
which files we create that did not exist and warn if the module supports 'mode'
and it was not specified and the module did not call set_mode_if_different(). This allows the user to take action and specify a mode rather than using the defaults.
A code audit is needed to find all instances of modules that call atomic_move()
but do not call set_mode_if_different(). The findings need to be documented in
a changelog since we are not warning. Warning in those instances would be frustrating
to the user since they have no way to change the module code.
- use a set for storing list of created files
- just check the argument spac and params rather than using another property
- improve the warning message to include the default permissions
* ensure hostvars are available on delegation
* also inventory_hostname must point to current host and not delegated one
* fix get_connection since it was still mixing original host vars and delegated ones
* also return connection vars for delegation and non delegation alike
* add test to ensure we have expected usage when directly assigning for non delegated host
Some platform such as ESXi does not implement EpollSelector,
which is selected by DefaultSelector. Use SelectSelector which is
based upon 'select' implementation. This works perfectly with
a platform like VMware ESXi.
Fixes: #70238
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Encode/Decode files in UTF-8
* Use helper function in ansible
* Add an integration test
* Use emoji in test data.
* add changelog
* Also support non-ascii chars in filepath and add tests about this.
* Also use non-ascii chars in replaced text and ensure not to break cron syntax.
* rename self.existing to self.n_existing
* rename crontab.existing to crontab.n_existing
Change:
- Refactoring to make it harder to get wrong and easier to read.
- Generalize become_unprivileged tests and fix some that never worked
but also never failed.
Test Plan:
- CI, new units/integration tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Fix missing quoting for remote_tmp in second mkdir of shell module. Issue #69577
* adding changelog
* fixing typo in changelog entry
* adding test case
Adding test case written by bmillemayhias.
* using $HOME instead of ~
* fixing commit measage
* Update 69578-shell-remote_tmp-quoting.yaml
Co-authored-by: Brian Kohles <me@briankohles.com>
debconf module exposes sensitive information to logs, console.
Add a note to user about using no_log=True to hide such
information from console.
Fixes: #32386
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
A couple of years ago Slackware -current began using a plus (“+”) at the end of the distribution version string to indicate a future version work-in-progress.
Rearrange distribution_files unit tests to easily support more tests
- add conftest with common fixtures
- use parametrize for testing multiple scenarios
* Add changelog
* Add unit tests for Slackware distribution parsing
* Use correct fixtures for Slackware
Data comes from /etc/slackware-version
Co-authored-by: Sam Doran <sdoran@redhat.com>
Co-authored-by: <Eduard Rozenberg <eduardr@pobox.com>>
A recent updated to psutil, which is a dependency of ansible-runner, fails
to install on older versions of pip.
Commit with the breaking change:
135628639b
