* Make sure include_role inherit variables from parent role
Setting the parent of task blocks generated by include_role after they
have been produced is not sufficient - it means the tasks don't have the
correct dependency chain set afterwards, and therefore, don't properly
inherit variables from outer roles.
In addition to manually setting the parents, pass the dep_chain when
compiling the role, such that variables are correctly imported.
Fixes#18540.
* Add tests for include_role
* Fix include_role variable inheritance for multiple parent levels
* Add test cases for VyOS commands that don't honor paging settings
Testing for issue fixed in PR #18546
* Add provider line and fix indentation
For the way we invoke the tests we need to specify the `provider:`
Also fix the indentation on `register:`
* Replace pipes.quote for shlex_quote
* More migration of pipes.quote to shlex_quote
Note that we cannot yet move module code over. Modules have six-1.4
bundled which does not have shlex_quote. This shouldn't be a problem as
the function is still importable from pipes.quote. It's just that this
has become an implementation detail that makes us want to import from
shlex instead.
Once we get rid of the python2.4 dependency we can update to a newer
version of bundled six module-side and then we're free to use
shlex_quote everywhere.
If the current ansible enviroment has a config setup
that doesn't use 'smart' as the configured transport
test_play_context would fail when it assumes the
transport will be 'smart'.
Previous changes addressed a corner case, which unfortunately introduced
another bug. This patch adds a new flag to the host state (did_rescue) which
is set to true when the rescue portion of a block completes. This flag is
then checked in _check_failed_state() when the fail_state != FAILED_NONE.
This lead to the discovery of another bug - current strategies are not advancing
hosts to ITERATING_COMPLETE after doing a peek at the next task, leaving the
host state in the run_state of the final task. To address this, before gathering
the list of failed hosts in StrategyBase.run(), a final pass through the iterator
for all hosts is done to ensure each host is in its final state. This way, no
strategy derived from StrategyBase has to worry about it and it's handled.
Fixes#17983
This commit extends YAML linting by enabling standard rules from the
`yamllint` tool [1]. Since syntax errors and key duplicates are already
checked since 4d48711, this change only adds detection for cosmetic
problems. It also narrows checks to the test/ dir only.
The main goal is to prevent future problems to enter the code base
without being noticed. While it would be a huge effort to be PEP8
compliant, it is relatively easy to have correct YAML style *now* and
prevent future errors by enabling linting.
Note: for those (like me) caring about code attribution: use `git blame
-w` to ignore whitespace-only changes.
Note: I disabled some linting checks (such as indentation), they can be
enforced in the future if needed. Similarly, current checks can also be
disabled. See the `.yamllint` file.
[1]: https://yamllint.readthedocs.io/
This change corrects problems reported by the `yamllint` linter.
Since key duplication problems were removed in 4d48711, this commit
mainly fixes trailing spaces and extra empty lines at beginning/end of
files.
* Added test for sequenced-name instance generation (num_instances)
* Added param-check tags to tests that only do argument checking
Should be merged AFTER ansible/ansible-modules-core#4276
- Use assertRaisesRegexp to make sure correct exceptions are raised.
- Set docker_command to avoid docker dependency (skips find_executable).
- Use a fake path for docker_command to make sure mock.patch is working.
* Fix bug (#18355) where encrypted inventories fail
This is first part of fix for #18355
* Make DataLoader._get_file_contents return bytes
The issue #18355 is caused by a change to inventory to
stop using _get_file_contents so that it can handle text
encoding itself to better protect against harmless text
encoding errors in ini files (invalid unicode text in
comment fields).
So this makes _get_file_contents return bytes so it and other
callers can handle the to_text().
The data returned by _get_file_contents() is now a bytes object
instead of a text object. The callers of _get_file_contents() have
been updated to call to_text() themselves on the results.
Previously, the ini parser attempted to work around
ini files that potentially include non-vailid unicode
in comment lines. To do this, it stopped using
DataLoader._get_file_contents() which does the decryption of
files if vault encrypted. It didn't use that because _get_file_contents
previously did to_text() on the read data itself.
_get_file_contents() returns a bytestring now, so ini.py
can call it and still special case ini file comments when
converting to_text(). That also means encrypted inventory files
are decrypted first.
Fixes#18355
This allows validate-modules to run in an environment where
python 3 is the default. This will no longer be necessary once
validate-modules is updated to work with both python 2 and 3.
- Remove shebangs from:
- ini files
- unit tests
- module_utils
- plugins
- module_docs_fragments
- non-executable Makefiles
- Change non-modules from '/usr/bin/python' to '/usr/bin/env python'.
- Change '/bin/env' to '/usr/bin/env'.
Also removed main functions from unit tests (since they no longer
have a shebang) and fixed a python 3 compatibility issue with
update_bundled.py so it does not need to specify a python 2 shebang.
A script was added to check for unexpected shebangs in files.
This script is run during CI on Shippable.
- Update import for relocated tests.
- Fix test to expect changed from update_tags.
- Add checks for boto3 and botocore to tests.
- Set check mode with kwarg.
- Python 3 fixes for unit tests.
- Python 2.6 fix for unit tests.
- Add missing meta value for test_create_server
- Add .gitignore for pytest .cache directory
Exclude test_os_server from nose test runs since it was designed
for pytest. The test will work correctly when run using pytest.
This is a temporary issue, as we'll be moving to pytest soon.
This commit adds some unit tests for the `cloud.openstack.os_server`
module. These tests exercise `_network_args` thoroughly and
`_create_server` lightly.
These tests will **fail** until ansible/ansible-modules-core#2275 lands.
To run the tests:
pip install -r test-requirements.txt
PYTHONPATH=$PWD py.test
Originally from ansible/ansible-modules-core@3387526bca
- Correct directory name in test/README.md
- Move code-smell tests to test/sanity/code-smell
- Update code-smell.sh to use new script paths
- Add test/integration/target-prefixes.win for ansible-test
- Move module unit tests to match module directory layout
* Network Test Documentation
Will need improving over time, though this ensure that everything that was in `ansible/test-network-modules` is in `ansible/ansible`
* Update README.md
* Inventory file
* Network module prefixes
In ansible-test we should skip tests for these modules, they will be
tested via another process.
* Update target-prefixes.network
In order to support legacy plugins, the following two method signatures
are allowed for `CallbackBase.v2_playbook_on_start`:
def v2_playbook_on_start(self):
def v2_playbook_on_start(self, playbook):
Previously, the logic to handle this divergence checked to see if the
callback plugin being called supported an argument named `playbook`
in its `v2_playbook_on_start` method. This was fragile in a few ways:
- if a plugin author did not use the literal `playbook` to name their
method argument, their plugin would not be called correctly
- if a plugin author wrapped their `v2_playbook_on_start` method and
by doing so changed the argspec to no longer expose an argument
with that literal name, their plugin would not be called correctly
In order to continue to support both types of callback for backwards
compatibility while making the call more robust for plugin authors,
the logic can be reversed in order to have a positive check for the old
method signature instead of a positive check for the new one.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
As neon is derived from Ubuntu, ansible_os_family should have the value
"Debian" instead of "Neon". Add a test case for KDE neon and set
os_family correctly for it.
If the facts returned by setup included strings that
had double quotes in them, the asserts in test_gathering_facts.yml
would fail with errors like:
"The conditional check '\"[{u'mounts': {u'options':
u'rw,context=\"system_u:\"'}}]\" != \"UNDEF_HW\"' failed. The error was:
template error while templating string: expected token 'end of statement
block', got 'system_u'. String: {% if \"[{u'mounts': {u'options':
u'rw,context=\"system_u:\"'}}]\" != \"UNDEF_HW\" %} True {% else %}
False {% endif %}"
For one example, if mount facts returned an 'options' field that
included double quoated selinux context ids, the test would fail.
Fix is removing the double quoting in the assert 'that:' lines,
and removing the unneeded double curly brackets.
Nothing seems to use this now.
Was added originally added in2d11cfab92f9d26448461b4bc81f466d1910a15e
but the code that used it was removed in
e02b98274b
On openSUSE Tumbleweed, lsb-release -a currently reports
the distributor ID as "openSUSE Tumbleweed". On openSUSE
Leap, the distributor ID is "SUSE LINUX".
Add them to the OS_FAMILY dict as Suse family systems.
Also add an entry to TESTSETS in test_distribution_version.py
for openSUSE Tumbleweed.
Since passlib algo sometime takes a bytes, and sometime
not, depending on a internal variable, we have to convert
bnased on it, or it fail with "TypeError: salt must be bytes,
not str" (or unicode instead of bytes)
However, that's not great to use internal structure for that.
* Add tag verification test (ansible-modules-core PR 2654)
* Fix typo
* Use smaller repo for testing, add dependency control
* Test is gpg exists before running git signing tasks
* Correct the test conditionals so that gpg1 is tested
Currently (pre-repomerge) we aren't running sanity.sh from
ansible/ansible, after the merge we will. Therefore I've added the
requirements here, rather than in ansible-modules-*/test/utils/shippable
Implement tag and skip_tag handling in the CLI() class. Change tag and
skip_tag command line options to be accepted multiple times on the CLI
and add them together rather than overwrite.
* Make it configurable whether to merge or overwrite multiple --tags arguments
* Make the base CLI class an abstractbaseclass so we can implement
functionality in parse() but still make subclasses implement it.
* Deprecate the overwrite feature of --tags with a message that the
default will change in 2.4 and go away in 2.5.
* Add documentation for merge_multiple_cli_flags
* Fix galaxy search so its tags argument does not conflict with generic tags
* Unit tests and more integration tests for tags
Prior to this commit, the ini parser would fail if the inventory was
not 100% utf-8. This commit makes this slightly more robust by
omitting full line comments from that requirement.
Fixes#17593
* Remove unicode-escape which is not present on python3
Alternative fix for #17305
* Enable the assemble test on python3
* Fix other problems with assemble on python3
If the sftp fails, roll over to scp by default. This saves users
from having to know about the scp_if_ssh method when sftp is broken
on the remote host.
* Turn mount test back on
* Mount tests need PRIVILEGED so turn that back on
Revert "Revert "Set PRIVILEGED=true for non_destructive tests. (#17733)" (#17738)"
This reverts commit dc0fb1c212.
* Add a needs_privileged tag so that we can skip mount tests on centos6
Some containers timeout on shippable tests when run with privileged.
Unfortunately, some tests require that in order to run. Tagging those
allows us to skip those tests on the platforms that timeout when we get
ready to run the integration test in shippable.
* Centos6 times out with PRIVILEGED set so remove that (will disable the mount tests on centos6)
* Remove false start
Python2 seems to allow any integer. Python3.5 on Linux seems to allow
a 32 bit unsigned int. Python3.5 on El Capitan seems to limit it to
a smaller size... perhaps a 16 bit int.
This adds some test data to test_facts.py that
includes mnt points that have a single quote in
the path.
Ala, https://github.com/ansible/ansible/issues/16855
The bug was already fixed via other changes, but this is
for regression testing.
* Add tests for the mount module
* Switch from unmounted to absent...
the code for mounting always modifies fstab so we need to always modify
fstab to cleanup as well.
* Fix comments and copyright
A parameter of type int should accept int and string, but not float.
A parameter of type float should accept float, int, and string.
Also reset the arguments in another test so that it runs cleanly. This
agrees with what all the other tests are doing.
Includes:
* Tests to create, delete, resize, recreate and configure an Autoscaler
* Tests for parameters only. Use TEST_FLAGS="--tags 'param-check'" to execute only these tests.
Requires:
* An instance template to be configured in your project.
* Improve unit testing of 'password' lookup
The tests showed some UnicodeErrors for the
cases where the 'chars' param include unicode,
causing the 'getattr(string, c, c)' to fail.
So the candidate char generation code try/excepts
UnicodeErrors there now.
Some refactoring of the password.py module to make
it easier to test, and some new tests that cover more
of the password and salt generation.
* More refactoring and fixes.
* manual merge of text enc fixes from pr17475
* moving methods to module scope
* more refactoring
* A few more text encoding fixes/merges
* remove now unused code
* Add test cases and data for _gen_candidate_chars
* more test coverage for password lookup
* wip
* More text encoding fixes and test coverage
* cleanups
* reenable text_type assert
* Remove unneeded conditional in _random_password
* Add docstring for _gen_candidate_chars
* remove redundant to_text and list comphenesion
* Move set of 'chars' default in _random_password
on py2, C.DEFAULT_PASSWORD_CHARS is a regular str
type, so the assert here fails. Move setting the
default into the method and to_text(DEFAULT_PASSWORD_CHARS)
if it's needed.
* combine _random_password and _gen_password
* s/_create_password_file/_create_password_file_dir
* native strings for exception msgs
* move password to_text to _read_password_file
* move to_bytes(content) to _write_password_file
* add more test assertions about genned pw's
* Some cleanups to alikins and abadger's password lookup refactoring:
* Make DEFAULT_PASSWORD_CHARS into a text string in constants.py
- Move this into the nonconfigurable section of constants.
* Make utils.encrypt.do_encrypt() return a text string because all the
hashes in passlib should be returning ascii-only strings and they are
text strings in python3.
* Make the split up of functions more sane:
- Don't split such that conditionals have to occur in two separate functions.
- Don't go overboard: Good to split file system manipulation from parsing
but we don't need to do every file manipulation in a separate
function.
- Don't split so that creation of the password store happens in two
parts.
- Don't split in such a way that no decisions are made in run.
* Organize functions by when it gets called from run().
* Run all potential characters through the gen_candidate_chars function
because it does both normalization and validation.
* docstrings for functions
* Change when we store salt slightly. Store it whenever it was already
present in the file as well as when encrypt is requested. This will
head of potential idempotence bugs where a user has two playbook tasks
using the same password and in one they need it encrypted but in the
other they need it plaintext.
* Reorganize tests to follow the order of the functions so it's easier
to figure out if/where a function has been tested.
* Add tests for the functions that read and write the password file.
* Add tests of run() when the password has already been created.
* Test coverage currently at 100%
As suggested in feedback on
https://github.com/ansible/ansible/pull/17575, add
os_family to test_distribution_version. Add the
correct os_family to the existing testcase data
entries.
Also add os_family to the output of
gen_distribution_version_testcase.py so any new
generated entries will contain this data.
* Make is_encrypted_file handle both files opened in text and binary mode
On python3, by default files are opened in text mode. Since we know
the encoding of vault files (and especially the header which is the
first set of bytes) we can decide whether the file is an encrypted
vault file in either case.
* Fix is_encrypted_file not resetting the file position
* Update is_encrypted_file to check that all the data in the file is ascii
* For is_encrypted_file(), add start_pos and count parameters
This allows callers to specify reading vaulttext from the middle of
a file if necessary.
* Combine VaultLib.encrypt() and VaultLib.encrypt_bytestring()
* Change vault's is_encrypted() to take either text or byte strings and to return False if any part of the data is non-ascii.
* Remove unnecessary use of six.b
* Vault Cipher: mark a few methods as private.
* VaultAES256._is_equal throws a TypeError if given non byte strings
* Make VaultAES256 methods that don't need self staticmethods and classmethods
* Mark VaultAES and is_encrypted as deprecated
* Get rid of VaultFile (unused and feature implemented in a different way)
* Normalize variable and parameter names on plaintext, ciphertext, vaulttext
* Normalize variable and parameter names on "b_" prefix when dealing with bytes
* Test changes:
* Remove redundant tests( both checking the same byte string)
* Fix use of format string without format operator
* Enable vault editor tests on python3
* Initialize the vault_cipher for VaultAES256 testing in setUp()
* Make assertTrue and assertFalse take the actual method calls for
better error messages.
* Test that non-ascii byte strings compare correctly.
* Test that unicode strings and ints raise TypeError
* Test-specific:
* Removed test_methods_exist(). We only have one VaultLib so the
implementation is the assurance that the methods exist. (Can use an abc for
this if it changes).
* Add tests for both byte string and text string input where the API takes either.
* Convert "assert" to unittest assert functions or add a custom message where
that will make failures easier to debug.
* Move instantiating the VaultLib into setUp().
* Added aws_retry decorator function with unit tests
* Restructured the code to be used with a base class.
This base class CloudRetry can be reused by any other cloud provider.
This decorator should be used in situations, where you need to implement
a backoff algorithm and want to retry based on the status code from the
exception.
* updated documentation
* fixed tabs
* added botocore and boto3 to requirements.txt
* removed cloud.py from py24 tests, as it depends on boto3
* fix relative imports
* updated test to be 2.6 compat
* updated method name from retry to backoff
* readded lxd
* Updated default backoff from 2 seconds to 1.1s.
This will be about a total of 48 seconds in 10 tries. This is
configurable.
* Fixes to the controller text model
* Change command line args to text type
* Make display replace undecodable bytes with replacement chars. This
is only a problem on pyhton3 where surrogates can enter into the msg
but sys.stdout doesn't know how to handle them.
* Remove a deprecated playbook syntax in unicode.yml
* Fix up run_cmd to change its parameters to byte string at appropriate times.
* Enable more integration tests for python 3.
* Split out python 3 integration tests.
Now that we're running more integration tests on python 3, the
tests are taking long enough that they warrant splitting out in
the same way the python 2 tests are split.
We couldn't copy to_unicode, to_bytes, to_str into module_utils because
of licensing. So once created it we had two sets of functions that did
the same things but had different implementations. To remedy that, this
change removes the ansible.utils.unicode versions of those functions.
The test_async test target was updated to accommodate changes in
output buffering behavior in python 3. This change in behavior
may need to be addressed in the future.
* Fix paramiko's exec_command() to return bytes on python3
* Run test_connection for python3 now too
* Fix atomic_move for problem in shippable's testing
* Python-2.4 needs to use b()
for `VariableManager._get_magic_variables()`.
This saves a lot of time re-iterating the nearly always constant global
list of groups and their members.
Generate once and cache, and invalidate cache in case `add_host:` or
`group_by:` are used.
* Port set_*_if_different functions to python3
* Add surrogate_or_strict and surrogate_or_replace error handlers for
to_text, to_bytes, to_native
* Set default error handler to surrogate_or_replace
* Make use of the new error handlers in the already ported code
* Move the unittests for module_utils._text as they aren't in basic.py
* Cleanup around SEQUENCETYPE. On python2.6+ SEQUENCETYPE includes
strings so make sure code omits those explicitly if necessary
* Allow arg_spec aliases to be other sequence types
* New features for include_vars
include_vars.py now allows you to include an entire directory and its nested directories of variable files.
Added Features..
* Ignore by default *.md, *.py, and *.pyc
* Ignore any list of files.
* Only include files nested by depth (default=unlimited)
* Match only files matching (valid regex)
* Sort files alphabetically and load in that order.
* Sort directories alphabetically and load in that order.
```
- include_vars: 'vars/all.yml'
- name: include all.yml
include_vars:
file: 'vars/all.yml'
- name: include all yml files in vars/all and all nested directories
include_vars:
dir: 'vars/all'
- name: include all yml files in vars/all and all nested directories and save the output in test.
include_vars:
dir: 'vars/all'
name: test
- name: include all yml files in vars/services
include_vars:
dir: 'vars/services'
depth: 1
- name: include only bastion.yml files
include_vars:
dir: 'vars'
files_matching: 'bastion.yml'
- name: include only all yml files exception bastion.yml
include_vars:
dir: 'vars'
ignore_files: 'bastion.yml'
```
* Added whitelist for file extensisions (yaml, yml, json)
* Removed unit tests in favor of integration tests
While trying to fix the test suite on python3, I noticed
this test fail due to to_json adding more whitespace in
python3 than in python2. So -w should ignored those
differences.
* Fix to_native call in selinux_context and selinux_default_context to
use the error handler correctly.
* Port set_mode_if_different to work on python3
* Port atomic_move to work on python3
* Fix check_password_prompt variable which wasn't renamed properly
tempfile.NamedTemporaryFile keeps a file handle causing os.rename() to fail with windows based vboxfs: [Errno 26] Text file busy.
Changed NamedTemporaryFile to mkstemp() and added a finally block to unlink the temp file in each and every case.
* run_command needed a bit of tweaking to its string handling of
arguments.
* The run_command change fixes the last bit of lineinfile so we can
enable its tests
