* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
* Returns zone ID for existing zone or `null`
* route53_zone: add module unit tests
* route53_zone: add compatibility with Python 2.6 to the unit tests
* route53_zone: address pycodestyle warning (add blank line)
* Adding New Model onyx_qos for Configuring QoS on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_qos
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on onyx_qos Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable Comments Phase 3
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Current Version 2.9
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove code but leave the metadata so that they can be listed as
removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
2.9 porting guide
* Adding Support For Vxlan In Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable failures
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on PR
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding New Model for Configure Buffer Pool on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_buffer_pool.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* fix missing attribs with dirct module execution
* also make remote tmp handling smarter
update tests
* set default if attrib does not exist
* add simple test
* add asa_og module
* add test
* fix pep8
* fix some sanity pylint
* fix import error order
* fix import
* replace cmd() method
* rename file and class
* add mock for connection
* fix commands in replace test function
* fix lines list
* update unit test
* fix 'and' logic for port-object command
* restore previous unit test; fix pep8 and remove debug
* other unit tests
* Add state present, absent, replace
* Update doc; add default for state
* update unit test with state present/absent
* fix typo in unit test
* fix pep8 too many blank lines
* fix show run for service object ASA Ver 8.x
* Add description field; fix bug for state present and absent
* Re-designed module structure for network, service and port objects
* update integration test for new module structure
* fix pep8
* update EXAMPLES and RETURN
* update units tests
* fix module typos in unit test
* removed provider from examples
* fix missing comma in replace test
* fix module name and remove provider
* update license
* remove register; update license; change import order; chage def state
* remove shebang
* fix doc default state
* change import order
* Update year in banner
* fix integration test as set of tasks
* remove arg_spec
* remove extends_documentation_fragment: asa
* Update DOC, remove unused import, change import order
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
Currently, if we try to stop or start a network two time in a row, the
second call will fail. With this patch:
- we don't recreate a network, if it exists
- we only stop a network if it's active, and so we avoid an exception
saying the network is not active
* test: mock libvirt
* add integration tests for virt_net
* test: enable virt_net test on RedHat 7 and 8
* ci: use the unsupported alias
* tests that require privileged mode are run in VM
* virt_net/create raise unexpected libvirt exception
* import mock from units.compat
* virt_net: do not call create() on "active" network
* virt_net func test: only clean up the libvirt packages
* test: virt_net: don't use assert_called()
* virt_net: add the destructive alias
* move the test in virt_net dir
* test/virt_net: clean up the network at the end
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Add support for multiple IPv6 addresses in nxos_l3_interface module
Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.
* Add internal support for IPv6 list
* Fix module idempotency
* Initialize tests for nxos_l3_interface
* Fix IPv4 removal idempotency
* Fix data extraction from nxos config
* Fix silently ignored interfaces in nxos_l3_interface
* Add warning when interface does not exist in nxos config
* Adding cnos_user module to Ansible
* Update cnos_user.py
* Adding Functional test cases and unit test cases.
* Fixing Bug found in testing with Lenovo Mars.
* Review comments incorporated
* Review comments implemented.
* Copy paste mistake
* Modify EXOS module utils to utilize 'httpapi' or 'network-cli' connection
* Changes to cliconf plugin to support 'json' or 'text' output for compatibility between network-cli and httpapi
* Add HTTPAPI plugin supportng JSONRPC and RESTCONF for EXOS
* exos_facts modify commands with run script cli2json.py to command dictionary specifying 'json' output
Load appropriate fixtures
* Update exos_config module to utilize the get_diff and get_default_flag functionality.
JSONRPC doesn't work well with pipes, regex MULTILINE
* Support for NOS agnostic 'cli_config' module by implementing 'get_default_flag' and 'get_diff' functionality
* Update Ansible Documentation regarding the connections available for EXOS
* nxos_interfaces_ospf: fix passive-interface states & check_mode
This fix addresses issues #41704 and #45343.
The crux of the problem is that `passive-interface` should have been treated as a tri-state value instead of a boolean.
The `no` form of the command disables the passive state on an interface (allows it to form adjacencies and send routing updates). It's essentially an override for `passive-interface default` which enables passive state on all OSPF interfaces.\*
This `no` config will be present in `running-config`.
\**See `router ospf` configuration.*
Since both enable and disable states are explicit configs, the proper way to remove either of these is with the `default` syntax.
Passive-interface config syntax:
```
ip ospf passive-interface # enable (nvgens)
no ip ospf passive-interface # disable (nvgens)
default ip ospf passive-interface # default (removes config, does not nvgen)
```
Code changes:
* `passive_interface` param changed from boolean to string, restricted to `true`,`false`,`default`.
* Several passive-interface specific checks were added because the existing module logic tends to test for true or false and doesn't handle the None case.
* Fixed `check_mode`.
Sanity verified on: N9K,N7K,N3K,N6K
* Fix doc header
* Unit tests for passive-interface
* doc fix#2
* Fix indent for SA
* Remove 'default' keyword, restore bool behavior
* remove changes to sanity
* Add Bitbucket pipelines variable module
* Add tests
* Remove parameters check for `absent` state
* Update version_added documentation field
* Minor fixes
* A few additional cosmetic changes
* Move to source_control
* Rename lib/ansible/modules/source_control/bitbucket_pipelines_variable.py to lib/ansible/modules/source_control/bitbucket/bitbucket_pipelines_variable.py
* Reflect directory change
* Move these imports as well
* Rename 'key' parameter (API) to 'name' (GUI)
* Add missing __init__.py files to mark modules
* Rename module (pipeline should be singular)
* Adjust module references and variable names after renaming
* Mention Docker SDK for Python instead of docker-py / docker.
* Docs fixes.
* Add myself as docker_container author.
* Use array syntax for running command.
* Break long lines.
* Avoid failure when docker_version is None.
* Improve docker-py vs. docker note in requirements.
* Canonicalize Docker SDK for Python upgrade instructions.
* Split long line.
* Make it clearer which hostnames are meant.
* Adding cnos_system module to Ansible.
* Adding UT, Functional test required for cnos_system. Bugs came up are fixed
* Adding more files to the cnos_system suit.
* Remove nose from unittests
This PR migrates the last of our unittests from using nose to using
pytest. We don't need to install nose in our testing environments
anymore
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
Adds missing Return values to documentation
Removes deprecated modules unit tests
adds ha order, ha group and ha load as failover types
refactors main() function and module manager to accomodate new patterns
updates docs
refactors unit tests
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* documentation changes
* Revert "documentation changes"
This reverts commit 02c369d0414fdff492d90865c903bdade3174261.
* Issue with port being removed and added on modify
* adds function to do version checks for bigiq
* adds version limitation to bigiq application modules
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Moving comparision functions to compare.py from common.py
* Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Moving comparision functions to compare.py from common.py
* fixes issue with data group elements containing IPs with Route Domains
refactors main() function and module_manager to accomodate new patterns
updates doc variables
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Pluribus Networks network cli terminal and cliconf plugins
* Changes in Unit tests and modules according to network_cli connection
* Changes in Unit tests and modules according to network_cli connection
