pytest.raises has two parameters, message and match. message is meant
to be the error message that pytest gives when the tested code does not
raise the expected exception. match is the string that pytest expects
to be a match for the repr of the exception. Unfortunately, it seems
that message is often mistakenly used where match is meant. Fix those
cases.
message is also deprecated so removed our usage of it. Perhaps we
should write a sanity test later that prevents the use of
pytest.raises(message) to avoid this mistake.
seealso: https://docs.pytest.org/en/4.6-maintenance/deprecations.html#message-parameter-of-pytest-raises
Also update the exception message tested for as we're now properly
detecting that the messages have changed.
* junos_facts refactor to work with resources modules
* Refactor junos_facts module to work with
network resource module.
* Fix unit test failures
* Fix review comments
* Skip gitlab tests if dependencies aren't met
* Skip certain unittests if passlib is not installed
* Fix tests with deps on paramiko to skip if paramiko is not installed
* Use pytest to skip for cloudstack
If either on Python-2.6 or the cs library is not installed we cannot run
this test so skip it
* nxos_vpc: pkl_vrf fixes for #57069Fixes#57069
- Symptom: When playbooks specify `pkl_vrf: default`, the result is that the cli does not set the `vrf` state.
- Analysis:
- First issue: 'default' is a reserved word when used with the `peer-keepalive` `vrf` keyword. It refers to the default rib.
- This is confusing in several ways because `peer-keepalive`'s *default* vrf is the `management` vrf.
- Second issue: When changing only one optional value (`pkl_vrf`) while other optional values are idempotent (`pkl_src`), the result is that the idempotent values are ignored; unfortunately the device cli *replaces* the entire command, in which case the idempotent values are removed.
- e.g. playbook specifies this:
```
{ pkl_dest: 10.1.1.1, pkl_src: 10.2.2.2, pkl_vrf: my_vrf }
```
```
peer-keepalive dest 10.1.1.1 src 10.2.2.2 # original
peer-keepalive dest 10.1.1.1 src 10.2.2.2 vrf my_vrf # intended result
peer-keepalive dest 10.1.1.1 vrf my_vrf # actual result
```
- Third issue: the `pkl` getter was relying on positional data. This broke when the `udp` keyword nvgen'd where `vrf` used to appear (shifting all keywords to the right).
- Tested on regression platforms: `N3K,N6k,N7K,N9K,N3K-F,N9K-F`
* PEP fixes
* PEP fix 2
* pkl should merge by default, not override
* rmv debugs
* add mike's tests
* fix comments
openvswitch_db was not parsing properly some arguments, which caused
some commands to be executed when they shouldn't. This commit fixesit
and adds unit testing for the usecase.
Closes-Bug: #55432
Closes-bug: #43858
* Add tests for KubeAPIVersion
* Legibility improvements for KubevirtVM tests
* Create units.utils.kubevirt with common stuff
* Add some VMIRS unit tests
* Improve error for docker modules when docker-py can't be imported.
* Add changelog.
* Mention platform and Python interpreter in more cases.
* Clarify wording.
* Adjust tests.
* nxos_bgp_neighbor: Add bfd support
- Add support for bfd state in nxos_bgp_neighbor
- Feature Pull Request
- nxos_bgp_neighbor
- Tested on platforms: `N3K,N6K,N7K,N9K`
* bfd T/F now bfd enable/disable
* pep fix ws
* Update dependence's name to firepower-kickstart
* Check response type before getting attributes
* Add unit test for construct_ansible_facts method
* Update error message
* Adding device_facts module for contribution
* changes added for pylint error
* Updated code to solve ansible-test compile error
* Changes to avoide comile error added
* Review Comments changes update
* Avoided blank line
* pylint error changes
* Removed ansible_facts return in error case
* Updated description
* modules renamed
* changing from ansible_facts to device_info
* avoide pep8 error
* Updated sample output
* version changed to 2.9
* Changed Copyright license to BSD
* Changed 3-clause BSD license to 2-clause BSD
* Added unit test support for ome_device_info
* version change
* removed pylint error in unit test modules
* Avoid Sanity error for unit test modules
* updated version
* nxos_interface_ospf: Add bfd support
Add support for `bfd` state in `nxos_interface_ospf`
- Feature Pull Request
`nxos_interface_ospf`
* Fix pep issues
* sanity loop: syntax
* bfd states changed from T/F to enable/disable/default
* doc hdr fixes
* nxos_bfd_global: initial commit
This is an initial POC with just a few commands included. The code has been written somewhat generically so that it can act as a best practices template for re-use in future modules. The implementation follows the yaml cmd_ref style to define each command's getter/setter/type/default. It supports platform-specific defaults.
The basic logic is to collect all relevant data in a `cmd_ref` dict and pass that around to various methods.
In the BFD case the devices don't provide JSON output so we have to screen-scrape with show runs.
BFD does not support present/absent states so there is no state param.
BFD has three different property types to handle. We can add add'l types as needed:
- int
- int_list (list of ints)
- str (needs support for 'no' keyword)
* Use get_capabilities to find platform type
* PR comment fixes, round 1
* Minor cleanups
* nxos_bfd_global: create NxosCmdRef in module_utils
This commit just takes the latest bfd global code and moves the bulk
of the code into new `class NxosCmdRef` in `module_utils/nxos/nxos.py`.
The only remaining code in `nxos_bfd_global.py` are the calls from `main()`.
* Add remaining command properties and documentation
* update argument_spec
* Add check for _exclude; add sanity test
* Add targets files for bfd
* Context and state absent updates
* Add dict support to cmd_ref
* Changed remaining list commands to dict usage
* Add idempotence check for dict
* Fix existing overwrite bug
* Move pattern matching logic into its own method
* add support for 'command: absent'
* Add `get_platform_shortname`; update BFD platform-specific settings
* /absent/deleted/
* /sh/show/ in prepare_nxos_tests
* add dict check to get_platform_shortname
* Add normalize_defaults()
* UTs for bfd_global
* support yaml for both py2/py3
* update cmd_ref doc header
* Fix python2.6 incompatibility with dict comprehensions
* Fix bfd_global doc header (yaml syntax fail)
* more shippable fixes
* yet more shippable fixes
* shippable: remove r' ' wrappers
* docfix - remove ':'
* escape regex ctl chars in yaml table
* remove extra blank lines
* Fix str(None) issue
* Command context updates
* import PY2,PY3 instead of import sys
* fix ordereddict import & parent_context
* try/except for yaml import
* fix import issue for ordereddict
* remove epdb
* nxosCmdRef_import_check() workaround for shippable
* fix PEP ws errors
* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
