The `git submodule status` command is relative to the current git repository by default.
When running from a repository subdirectory paths can be returned above the current directory.
Specifying the current directory with `git submodule status` avoids listing submodules above that directory.
This will fix issues when testing a collection that is rooted below the repository root when that repository uses submodules.
* Update collections integration targets path.
* Fix integration path handling.
* Add collections test target fallback.
Also add warnings and errors for common path mistakes.
* Improve role target detection.
This directory is currently a fixed location to make troubleshooting easier.
It is cleared before each test target runs, but is preserved when a test target finishes.
This allows the contents to be inspected when a test fails.
The previous location was `~/ansible_testing/`.
The new location is within the content root:
- `test/results/.tmp/output_dir` for Ansible
- `tests/output/.tmp/output_dir` for Ansible Collections
Moving the directory reduces the number of places on the filesystem where tests create output.
It also enables the results to be returned from delegated systems.
* Clean up layout paths for integration tests.
* Remove "special" integration test target type.
* Remove unnecessary role detection logic.
* Remove support for non-sh runme scripts.
* Simplify reading of aliases.
The directories used for collections tests are changing as follows:
`test/` -> `tests/`
`test/results/` -> `tests/output/`
This is a breaking change for collections tests executed by ansible-test.
All collections will need to be updated to use the new directory.
The `tests/output/` directory should be added to the `.gitignore` or equivalent in each collection.
This change is being made before the first pre-release of Ansible 2.9 since ansible-test has not yet been shipped.
Using the `tests/` directory matches the other collections directories `plugins/` and `roles/`.
This resolves https://github.com/ansible/ansible/issues/60218
* Add --venv delegation to ansible-test.
* Update import sanity test venv creation.
* Fix import test when using --venv on Python 2.x.
* Improve virtualenv setup overhead.
* Hide pip noise for import sanity test.
* Raise verbosity on venv info messages.
* Get rid of base branch noise for collections.
* Add missing --requirements check.
* Remove .keep files from test/results/ dirs.
* Remove classification of test/results/ dir.
* Add results_relative to data context.
* Use variables in delegation paths.
* Standardize file writing and results paths.
* Fix issues reported by PyCharm.
* Clean up invocation of coverage command.
It now runs through the injector.
* Hack to allow intercept_command in cover.py.
* Simplify git ignore for test results.
* Use test result tmp dir instead of cache dir.
* Remove old .pytest_cache reference.
* Fix unit test docker delegation.
* Show HTML report link.
* Clean up more results references.
* Move import sanity test output to .tmp dir.
* Exclude test results dir from coverage.
* Fix import sanity test lib paths.
* Fix hard-coded import test paths.
* Fix most hard-coded integration test paths.
* Fix PyCharm warnings.
* Fix import placement.
* Fix integration test dir path.
* Fix Shippable scripts.
* Fix Shippable matrix check.
* Overhaul key pair management.
* Change collection PS util import pattern
* Add changes for py2 compat
* fix up regex and doc errors
* fix up import analysis
* Sanity fix for 2.6 CI workers
* Get collection util path for coverage collection
* Added coverage collection for PowerShell - ci_complete ci_coverage
* uncomment out coverage uploader call
* Generate XML for PowerShell coverage
* Use whitelist to exclude coverage run on non content plugins
* Remove uneeded ignore entry
* Try to reduce diff in cover.py
* Fix up coverage report package - ci_complete ci_coverage
ansible-test: async deployment w/ vcenter provider
So far, `ansible-test`'s vcenter provider was trigger by a blocking POST
call. Since the depoyment take a lot of time (> 8m), we decided to use
an async call instead and poll the API server until the deployment
is ready.
* Remove pointless sanity tests on `bin` dir.
* Update action-plugin-docs test for collections.
* Update no-main-display test for collections.
* Update empty-init test for collections.
* Update no-assert test for collections.
* Move required-and-default-attributes test.
This test only applies to Ansible itself.
* Update use-argspec-type-path test for collections.
* Relocate ansible-test self tests outside package.
We don't want to include the tests for verifying ansible-test within the ansible-test package.
* Add `test/ansible_test/` to classification.py.
* Fix test invocation.
* Relocate tests in MANIFEST.in.
* Improve package-data sanity test error checking.
* Only use includes for ansible-test in MANIFEST.in.
* Improve readability of MANIFEST.in.
* Run no-unwanted-files sanity test only on Ansible.
Since collections should be able to use binary modules there is not really any limit on what could exist in a collection `plugins` directory.
* Add support for symlinks in sanity target lists:
- Sanity tests that need to analyze symlinks can do so using the supplied target list.
- Tests that analyze directories will now only look at symlinks if requested.
- Directory symlinks will now be seen as directories instead of files.
* Enable symlinks on filename based sanity tests.
Sanity tests that evalulate filenames instead of content should include symlinks.
* Update symlinks sanity test.
Use the sanity test target list now that it can include symlinks.
DCI uses an inventory directory instead of a file, along with --no-temp-workdir.
This changes the inventory check to keep that scenario working until all DCI jobs can be migrated to Zuul.
* Update ansible-test collection inventory handling.
- The `windows-integration` command now supports the `--inventory` option.
- The incomplete support for host_vars and group_vars directories has been removed.
- The incomplete support for an inventory directory has been removed.
- The inventory specified by `--inventory` can now reside outside the install and content roots.
- Using `ansible_ssh_private_key_file` with `--docker` or `--remote` results in a warning about the combination being unsupported and likely to fail.
* Fix config handling.
* Fix payload handling of ssh keys.
* Disable pylint no-self-use rule for ansible-test.
* De-duplicate payload paths.
* add subdir support to collection loading
* collections may now load plugins from subdirs under a plugin type or roles dir, eg `ns.coll.subdir1.subdir2.myrole`->ns.coll's roles/subdir1/subdir2/myrole, `ns.coll.subdir1.mymodule`->ns.coll's plugins/modules/subdir1/mymodule.py
* centralize parsing/validation in AnsibleCollectionRef class
* fix issues loading Jinja2 plugins from multiple sources
* resolves#59462, #59890,
* sanity test fixes
* string fixes
* add changelog entry
Host specific settings are created as part of the generated inventory instead of using a host_vars directory.
Also update connection tests to work properly with the generated inventory changes.
* Start of work to support collections
* remove version_added from base schema
* If a collection, pass that to validate-modules
* clean ups
* Allow version_added in a collection, just make it optional
* Don't traceback on missing doc_fragment
* Don't validate metadata in a collection
The `test/integration/integration_config.yml` vars file will now be loaded from the content under test and is now optional.
The `output_dir` and `win_output_dir` vars are now provided by ansible-test.
* Move Ansible test config into env vars.
This allows ansible-test to use an empty Ansible config file, leaving open the option for users to customize the one used to run tests (although such usage is discouraged).
* Use config from content under test when present.
The vcenter provider allow one to use the `VMWARE_TEST_PLATFORM` to
manually select a test platform. The test platforms are:
- `govcsim`
- `static`
- and `worldstream`.
Before this commit, the `govcsim` value was ignored.
Example:
```shell
$ VMWARE_TEST_PLATFORM=govcsim ansible-test integration --python 3.7 needs/target/prepare_vmware_tests/
```
* Move ansible-test units code into separate dir.
* Fix --explain on "code smell" sanity tests.
* Add --strict-markers to pytest invoctaion.
* Fix classification of units code changes.
* Cache ansible version lookup.
* Fix method of determining ANSIBLE_ROOT.
* Clean up based on PyCharm inspections.
* Generate minimal PKG-INFO without setup.py.
* Use ANSIBLE_LIB_ROOT where possible.
* Use import instead of subprocess to get version.
* Fix install layout type.
* Correct required paths message for installs.
* Update list of files copied during delegation.
* Fix ansible-test entry point.
* Fix pylint issue.
* Fix version lookup on Python 2.x.
* Fix pylint issue.
* Remove unwanted print statement.
* Some framework for docs
* Separate CSS file for our site-specific CSS.
* Override the read-the-docs theme for tables so that tables don't
always horizontally scroll
* Add a |br| substitution that lets us line break inside of tables
* Add |_| non-breaking-space substitution which is also for formatting
tables
* Configure rstcheck to ignore all substitutions which are being added
by sphinx in the conf.py
* Fix table of auto interpreter options
The table was being hardcoded at a certain width to work around a
read-the-docs theme bug. Fix the bug instead and format the table using
better sphinx practices.
* Remove unused substitutions
We had substitutions defined that were never used in our documentation.
Remove those.
Also add to the rstcheck whitelist three substitutions which are defined
by sphinx itself, version, release, and today.
* Relocate module validator code and tests.
* Fix validate-modules entry point and imports.
* Fix paths and test entry points.
* Fix up unit tests.
* Fix shebang and execute bit.
* Relocate ansible-only sanity tests.
* Get "code smell" sanity tests from multiple dirs.
- `test/lib/ansible_test/_data/sanity/code-smell/` - General purpose tests used for both Ansible and Ansible Collections.
- `test/sanity/code-smell/` - Tests specific to Ansible, will not be used for Ansible Collections.
