Commit graph

115 commits

Author SHA1 Message Date
Trishna Guha
2e8a3efccb
Revert nxos, ios, iosxr return_timestamps (#56206)
* Revert "nxos_command:run_commands results failure when commands array size >1 (#52670)"
This reverts commit 0df5b92af3.
* Revert "added timestamps to nxos_command module (#50261)"
This reverts commit e150943314.
* Revert "added timestamps to ios_command module (#50323)"
This reverts commit 2a432a093b.
* Revert "added response_timestamps to iosxr_command module (#50095)"
This reverts commit 2a0c356da9.
2019-05-08 20:49:29 +05:30
Trishna Guha
57e0567310
fix nxos_vlan mode idempotence bug (#55144)
* fix nxos_vlan mode idempotence bug

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Fix CI failure

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2019-05-08 11:19:15 +05:30
Toshio Kuratomi
a1c8fc37e8 Remove modules which have ended their deprecation cycle
* Remove code but leave the metadata so that they can be listed as
  removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
  2.9 porting guide
2019-04-12 12:57:35 -07:00
Olivier BLIN
1a57daf9b0 Add support for multiple IPv6 addresses in nxos_l3_interface module (#50892)
* Add support for multiple IPv6 addresses in nxos_l3_interface module

Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.

* Add internal support for IPv6 list
* Fix module idempotency

* Initialize tests for nxos_l3_interface

* Fix IPv4 removal idempotency
* Fix data extraction from nxos config

* Fix silently ignored interfaces in nxos_l3_interface

* Add warning when interface does not exist in nxos config
2019-03-27 10:52:42 -04:00
Chris Van Heuveln
20fb77c49b nxos_interfaces_ospf: fix passive-interface states & check_mode (#54260)
* nxos_interfaces_ospf: fix passive-interface states & check_mode

This fix addresses issues #41704 and #45343.

The crux of the problem is that `passive-interface` should have been treated as a tri-state value instead of a boolean.

The `no` form of the command disables the passive state on an interface (allows it to form adjacencies and send routing updates).  It's essentially an override for `passive-interface default` which enables passive state on all OSPF interfaces.\*
This `no` config will be present in `running-config`.

   \**See `router ospf` configuration.*

Since both enable and disable states are explicit configs, the proper way to remove either of these is with the `default` syntax.

Passive-interface config syntax:
```
  ip ospf passive-interface              # enable  (nvgens)
  no ip ospf passive-interface           # disable (nvgens)
  default ip ospf passive-interface      # default (removes config, does not nvgen)
```

Code changes:

* `passive_interface` param changed from boolean to string, restricted to `true`,`false`,`default`.

* Several passive-interface specific checks were added because the existing module logic tends to test for true or false and doesn't handle the None case.

* Fixed `check_mode`.

Sanity verified on: N9K,N7K,N3K,N6K

* Fix doc header

* Unit tests for passive-interface

* doc fix #2

* Fix indent for SA

* Remove 'default' keyword, restore bool behavior

* remove changes to sanity
2019-03-27 09:15:50 +05:30
Sam Doran
43a44e6f35
Move utility functions out of basic.py (#51715)
Move the following methods to lib/anisble/module_utils/common/validation.py:

- _count_terms()
- _check_mutually_exclusive()
- _check_required_one_of()
- _check_required_together()
- _check_required_by()
- _check_required_arguments()
- _check_required_if
- fail_on_missing_params() --> create check_missing_parameters()
2019-03-14 21:29:55 -04:00
Olivier BLIN
87a01df6ad Fix 'defaults' option in the nxos_config module (#51076)
* Fix 'defaults' option in the nxos_config module

Nxos get_config is allways called with the 'all' option.
* Fix flag's calculation
* Add tests

* nxos_config: the 'backup' option take into account the value of 'defaults' option

If 'defaults' option is true, the running-config backup is done with the all
keyword.
2019-01-23 11:29:27 +05:30
Nathaniel Case
9702893729
Remove deprecated options from modules (#50246)
* Remove deprecated options from modules

* Update tests

* Add porting guide notes
2019-01-22 09:18:26 -05:00
vaneuk
e150943314 added timestamps to nxos_command module (#50261)
* added timestamps to nxos_command module

nxos_command module now returns timestamps field, which shows command execution time

* –fixed unit test failure for /lib/ansible/module_utils/basic

* cosmetic changes to align with PEP 8
2019-01-17 10:14:31 +05:30
Toshio Kuratomi
3fba006207 Update bare exceptions to specify Exception.
This will keep us from accidentally catching program-exiting exceptions
like KeyboardInterupt and SystemExit.
2018-12-16 15:03:19 -08:00
saichint
b92556549e Add new configurations for nxos_vxlan_vtep (#47834)
* add new commands for vxlan

* review comments

* fix unit test

* fix sanity yaml spaces
2018-11-02 11:23:37 +05:30
Matt Clay
3033fd96b0
Move unit test compat code out of lib/ansible/. (#46996)
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
2018-10-12 20:01:14 -07:00
Dan
a6c20488d3 Add ospf net type (#45904)
* Added ospf network type option to nxos_interface_ospf module

* Added documentation and example for the 'network' parameter

* adding version
2018-09-25 11:38:39 +05:30
Trishna Guha
96346938ee
nxos_vlan refactor to support non structured output (#43805)
* nxos_vlan refactor to support non structured output

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* unittest fix

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* minor fixes

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* use check_rc

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* address review comment

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* remove additional return statement

* address Nate's review

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-08-10 21:03:56 +05:30
Trishna Guha
09ae1ec308
cliconf refactor eos, nxos fix (#43596)
* cliconf refactor eos and nxos fix

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* move nxos replace check to plugins

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* address review comment

* fix shippable
2018-08-02 16:34:48 +05:30
Joren Vrancken
b954917761 Surround top-level function and class definitions with two blank lines. 2018-07-31 12:06:56 -07:00
tstoner
2c3d418e53 Nxapi ssl (#42905)
* NXAPI ssl ciphers & protocols default values

* TLSv1, TLSv1.1, TLSv1.2 and weak cipher support

* NXOS NXAPI weak/strong cipher & TLSv 1.2, 1.1 & 1.0 support

* Version checking for strong/weak ciphers & TLS 1.2, 1.1 & 1.0 support

* Cleaned up erroneously committed changes.

* Specific NXOS platform checking for nxapi ssl ciphers & protocols

* Fixed ansibot reported errors.

* Resolved ansibot reported error.

* Added network_os_version to mocked up N7K unit test device_info

* Calling get_capabilities() once in main and passing results into methods.

* Removed raising exceptions when platform capabilities return None
per reviewers request. Skipping nxapi ssl options when capabilities
are None and generating a warning when these options are skipped

* Cleaned up explicit checks for None/not None
2018-07-27 22:10:39 +05:30
Ganesh Nalawade
af3f510316
nxos cliconf plugin refactor (#43203)
* nxos cliconf plugin refactor

Fixes #39056

*  Refactor nxos cliconf plugin as per new api definition
*  Minor changes in ios, eos, vyos cliconf plugin
*  Change nxos httpapi plugin edit_config method to be in sync with
   nxos cliconf edit_config

* Fix CI failure

* Fix unit test failure and review comment
2018-07-27 11:05:40 +05:30
Nathaniel Case
82dfa542c2
Replace bogus (but routeable) ip addresses with RFC 5737 example addresses (#40554)
* Remove 1.1.1.1 from *_config tests

* remove from *_smoke and *_system

* Miscellaneous other tests

* Remove from module documentation as well

* Remove from unit tests as well

* Remove accidental duplication from rebase
2018-05-30 13:03:20 -04:00
James Mighion
d9533c3cbf Adding changed option to save_when (#40640)
* Adding changed option to save_when

* Fixing version when changed was added.
2018-05-24 22:18:59 +05:30
Matt Clay
8deced3e04
Fix shebangs and file modes and update tests. (#40563)
* Add execute bit sanity test and apply fixes.
* Add shebang test for `lib` dirs and apply fixes.
* Shebang and execute bit cleanup.
2018-05-22 14:25:36 -07:00
saichint
dabe5e6d07 fix nxos_hsrp issues (#38410)
* fix nxos_hsrp issues

* shippable fix

* add examples for md5 auth
2018-04-09 23:54:05 -04:00
Trishna Guha
2fbfce06e7
Fix nxos_interface multiple issues (#36827)
* fix interface_type

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* fix setting mtu, doc for state check param, doc for params applicable for ethernet intf

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* speed idempotence and add unittest

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* fabric_forwarding_anycast_gateway applicable for svi type intf only

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* fix speed

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-03-01 10:56:16 +05:30
rahushen
e24c547a3a Fixes for the N3500 platform that uses the A8 image (#36261)
* fix nxos_l3_interface tests as n35 doesn't support ipv6

* add terminal dont-ask to nxos_feature and nxos_lldp

* put interfaces in L2 mode for N35

* fix nxos_feature unit-tests
2018-02-17 10:16:03 +05:30
saichint
75a34f6668 fix nxos_bgp_af issues (#36147)
* fix nxos_bgp_af issues

* shippable fix

* review comments

* shippable error fix
2018-02-16 09:34:24 +05:30
saichint
c7305393a3 fix nxos_evpn_vni issues (#35930) 2018-02-09 13:02:41 +05:30
saichint
80fcfdc0d1 fix nxos_vpc issues (#35868) 2018-02-08 18:50:37 +05:30
saichint
dc35baa8db fix nxos_pim_interface issues (#35405)
* fix nxos_pim_interface issues

* add absent test for pim_interface
2018-01-31 10:51:11 +05:30
Trishna Guha
a65f702155
add config option to replace argument (#34342)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-01-15 21:17:02 +05:30
Trishna Guha
df8b01aaf7
Handle platform os version for sandbox nxos_nxapi (#34490)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-01-11 21:12:00 +05:30
Trishna Guha
5e6b2495c0
Convert nxos_vrf to DI module (#34274)
* Convert nxos_vrf to DI module

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add purge example and improve logic

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* revert version_added for rd param

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* update test to use network_cli

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-01-08 10:10:34 +05:30
Trishna Guha
9d2182bcf8 Deprecate nxos_switchport and Add nxos_l2_interface DI module (#33813)
* Deprecate nxos_switchport

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add nxos_l2_interface DI module

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* pep8 fixes

* aggregate test for nxos_l2_interface

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* revert nxos_switchport test change

* gundalow's comment

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2018-01-05 07:44:02 +00:00
bdowling
552d1df901 Adds parents to mutually_exclusive with src for *_config modules (#33957)
* mutually_exclusive add - ios_config parents works with lines by not src

* mutually_execlusive parents,src added to all other net modules

* tests for mutually_exclusive parents,src and whitespce removal
2018-01-03 09:47:12 -05:00
Trishna Guha
80ba767204
Convert nxos_interface to DI (#34240)
* Convert nxos_interface to DI

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add integration test

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* commit for ganeshrn's comment

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-12-28 16:41:09 +05:30
Trishna Guha
60f3649ebd
Convert nxos_vlan to DI module (#31866)
* Convert nxos_vlan to DI

* fix conflict

* push fix for qalthos's comment

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-12-21 14:08:33 +05:30
Trishna Guha
be89822bb5
Deprecate nxos_portchannel and add nxos_linkagg DI module (#33376)
* deprecate nxos_portchannel

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add nxos_linkagg DI module

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* remove nxos_portchannel unit test

* fix syntax issues

* fix ansible-doc failure

* update nxos_portchannel unittest

* minor fixes and integration test

* update nxos_linkagg
2017-12-20 11:26:07 +05:30
Trishna Guha
3cce8dfafd
Deprecate nxos_ip_interface and Add nxos_l3_interface DI module (#33866)
* Deprecate nxos_ip_interface module

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add nxos_l3_interface DI module

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add integration test

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* pep8 fixes

* Add nxapi cli test

* Improve complexity

* manage layer3 interface

* fix unit test
2017-12-20 11:07:23 +05:30
Trishna Guha
27be2a0f5a
Handle nxos platform diffs with cli conf implementation (#34020)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-12-20 10:41:10 +05:30
Trishna Guha
9f86b923e9
[CLI_CONF] Refactor nxos module common library to use cliconf plugin (#31524)
* refactor nxos modules

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* get_config update

* fix get_config

* update nxos module

* device_info

* fix conflict

* add failure message check

* pep8 fixes

* use get_capabilities to check cliconf

* Add logic to detect platform in get_capabilities and cache in module_utils

* return msg in edit_config

* fix conflicts

* make modules compatible

* fix nxos cliconf api

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* cache capabilities

* Update transport queries to get_capabilities in module level

* fix unit tests

* load_config error code

* remove unnecessary change

* Refactor nxos_install_os module
2017-12-19 12:22:33 +05:30
Trishna Guha
25a465ffcb
loopback doesn't support passive_interface (#33252)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-11-27 22:56:16 +05:30
Mike Wiebe
95a2140f4b Use show command to support wider platform set for nxos_interface module (#33037)
* Use show command to support wider platform set

* Fix unit tests
2017-11-20 18:59:09 +00:00
Arnaud
84117e57ba nxos: 32 bits AS in as-dot format not recognized by regexp asn_regex (#30569)
* added test for 32 bits AS

* Lint not happy.
2017-11-20 10:09:16 +00:00
Pilou
a5c9726502 Unit tests: share common code (#31456)
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
2017-11-17 09:17:07 -08:00
Trishna Guha
3ee2501c83
multiple fixes nxos (#32903)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-11-14 15:23:11 +00:00
Trishna Guha
c40de24e9c
fix mtu check nxos_interface (#32880)
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-11-14 10:40:37 +00:00
Trishna Guha
f49555d494
nxos_bgp_neighbor_af feature idea disable-peer-as-check (#32665)
* nxos_bgp_neighbor_af feature idea disable-peer-as-check

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add unit test

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-11-13 14:48:31 +00:00
Trishna Guha
e4052c1261
Add mtu option nxos_interface feature idea (#32680)
* Add mtu option nxos_interface feature idea

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>

* Add unit test for mtu feature

Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
2017-11-13 14:48:04 +00:00
Kedar K
916e6be888 - Fix to return error message back to the module. (#31035) 2017-09-29 17:06:30 +05:30
Kedar K
4c21563ac6 - Adds sub-interface support for nxos_interface and nxos_ip_interface (#30830)
- Support dot1 encapsulation on routed sub-interface
2017-09-26 21:34:51 +05:30
Ganesh Nalawade
d72eb08902 Fix nxos provider transport warning issue (#30610)
* Fix nxos provider transport warning issue

*  Add default value of transport arg in provider spec
*  Remove default value if transport arg in top level spec
   This ensure deprecation warning is seen only in case transport
   is given as a top level arg in task
*  Refactor nxos modules to reference transport value from provider
   spec

* Fix unit test

* Remove transport arg assignment in nxos action plugin

* As assigning transport value is handled in provider spec
  top level task arg assignment is no longer required
2017-09-22 10:32:25 +05:30