* Parse Healthcheck.StartPeriod properly
* Add changelog fragment
* Use proper markup in changelog
Co-Authored-By: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow to inspect containers directly.
* Wait for containers to be removed before recreating them.
* Also wait for containers to be removed before creating them.
* Add changelog.
* Fix multiple subnet (of same IP version) idempotence for docker_network.
* Add changelog.
* Unit tests no longer make sense, since the part of the code they test has been removed.
* Re-add CIDR validation. Move it to better position (module setup instead of idempotence check).
* Update changelog.
* Only run new tests on VM test images.
* Actually do what is documented. Especially since an empty object is a valid value for aux_addresses.
In addition to signing update queries also use the TSIG key to sign
lookup queries. By doing that we allow a hidden master to not only to
be looked down network wise, but also TSIG wise.
A bonus benefit of threating update queries and lookup queries more
the same is that will allow for all queries to be refactored into a
shared helper method. Currently we have a bit too much duplicated code
within the module.
Check for virtualNicManager in Esxi host system before accessing properties in vmware_vmkernel_info.
Fixes: #62772
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Load the cache plugin for the inventory script plugin and fix update cache logic
* Remove the illusion and let individual scripts deal with it
* reword that
* Deprecate instead of a hard failure
* changelog
* Fix netconf plugin related to collections
Fixes#65655 (partly)
* Make netconf plugins configurable so that the
information of ncclient device handler
for give platform resides in the platform
specific netconf plugin.
* If the device handler value in ncclient is
different from the ansible_network_os value
the right value of `ncclient_device_handler`
should be set in the plugin documentation.
* Fix review comments
* Fix CI issue
* Fix review comment
elb_network_lb.py: allow UDP and TCP_UDP protocols
- Fixing documentation
- Add support to UDP and TCP_UDP as described on AWS SDK
elb_target_group.py: allow UDP, TLS, TCP_UDP proto
- Fixing documentation
- Making health checks with response codes and paths only in HTTP/HTTPS
- Allow UDP, TLS, TCP_UDP protocols as described on AWS SDK.
others:
- Added changelog fragments
- Integration test
Fixes: #65265
Signed-off-by: Alexandre Mulatinho <alex@mulatinho.net>
* free strategy - include failed hosts that were notified so --force-handlers is used
* trim line length a bit
* Loop over the force handler tests with the strategies linear and free
* rename changelog
* Use the play iterator instead of TQM for accurate failure representation in blocks
* Remove hack in a backwards compatible way for 3rd party plugins
* Fix copy/pasta for ecs_ecr test names
* Add support for lifecycle policies to ecs_ecr
New feature for ecs_ecr to support [ECR Lifecycle Policies][].
Fixes#32003
[ECR Lifecycle Policies]: https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html
* Improve error message for ecs_ecr parsing errors
Replaces the exception and stack trace with a description of what's
actually going wrong from a user perspective.
* Rename delete policy to purge policy
Marks the `delete_policy` parameter as deprecated, to be removed in
Ansible 2.6.
* Add version_added to purge_policy
* Remove changing results based on verbosity
What I really want is --diff support, and changing results based on
verbosity is abnormal.
* Ensure repository name is lowercase
* Fix deprecation cycle to 4 releases
* Use a YAML anchor for credentials
* Remove filters from assertions
* Add minimal permissions needed
* Updating version_added and deprecation cycle
The original PR sat while a few releases happened.
* Bumping version added and deprecation version
We missed the 2.8 release.
* Removing bare except:
This is not allowed and is generally bad practice.
* Fix lint errors
* update ansible release metadata
* Use the new alias deprecation scheme
This was added in the time the PR has been in development, so rework
things to use it.
* Add test coverage
This makes sure that lifecycle_policy is produced when passed in.
*Also a minor suggestion for simplification from PR.
* Restore changes from 62871 lost in rebase
* Add changelog
* Remove version_added for new purge_policy option
Per sanity test fail.
* Move new Ansible cli options '--ask-vault-password' and '--vault-pass-file' to the existing calls to add_argument
* Add changelog fragement
* Change order of ansible cli arguments to use --ask-vault-password and --vault-password-file by default
* Update runme.sh in vault integration tests to test new options --ask-vault-password and --vault-pass-file
Rather than silently processing extra_vars filename without @ sign,
CLI now fails with appropriate warning about requirement.
Fixes: #51857
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Modified to include plan information.
* Fixed where plan is passed to the virtual machine object.
* Added changelog file
* Update changelogs/fragments/65335-add-plan-to-azure-vmscaleset-module.yaml
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Added plan suboptions with required flag. Removed code block checking plan since suboptions were added.
* Changed true to True. Added space after commas where failed tests indicated.
* Removed extra blank line. Added promotion_code to plan param list.
* Trying to fix indention issue
* Trying to fix indention
* Changed example capacity to trigger build check. Last failure was not due to code.
* Removed property for accepting terms and code block using it..
* Removed extra unneeded spaces.
* Simply sorting of Windows files below other plugin types
Using the sort method with a custom key function uses less memory than creating multiple lists then joining them.
This seemed to be an acceptable use of a lamdba, even though I geneally try to avoid them.
* Fix sorting of plugins inside of collections
Explicitly sort Windows files below others, mimicking what we do in plugin/loader.py
* Add documentation about ansible.builtin and ansible.legacy
Also document to the two different methods used for searching based on the candidate type.
* Add changelog
* Add integration test
* Update comment with expected sort order
* Fix network action plugin load in collection
Fixes https://github.com/ansible/ansible/issues/65071
* Load network action plugin that matches the module
prefix name from list of collections.
* Update changelog
* Fix unit test
* Fix nxos_file_copy option value path validation
* Modify `local_file`, `local_file_directory` and
`remote_file` option type from `str` to `path`
so that the option value is validated in Ansible
for a legitimate path value
* Fix review comments
* fixes bug: visible_name was not updated when not set in existing host in zabbix
* Update changelogs/fragments/fix_zabbix_host_visible_name.yml
Co-Authored-By: Dusan Matejka <D3DeFi@users.noreply.github.com>
* Update lib/ansible/modules/monitoring/zabbix/zabbix_host.py
Co-Authored-By: Dusan Matejka <D3DeFi@users.noreply.github.com>
* The become method name check is not required in network_cli
as the become command is specific to platform and is implemented
in the platform specific terminal plugins
* Fix action plugin isse with network connection type in common collection
* For network connection in common collection the value of
ansible_connection is the FQCN of the connection type
For example ansible_connection=network.common.network_cli
* Add fix in supported network action plugins to extract
the connection name from FQCN
* Fix CI issue
* Fix review comments and update community network action plugins
if user sets 'write_files' to False or does not set value, then
handle file write related operations.
Fixes: #64936
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
CVE-2019-14904 - solaris_zone module accepts zone name and performs actions related to that.
However, there is no user input validation done while performing actions.
A malicious user could provide a crafted zone name which allows executing commands
into the server manipulating the module behaviour.
Adding user input validation as per Solaris Zone documentation fixes this issue.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Since older versions of paramiko do not require cryptography,
we cannot catch the exact exception from cryptography.
Remove other exceptions since we're catching everything now
Previously you'd get one of the following behaviours:
- A boto3 error
- Nothing would change
- An error that you're not allowed to change the strategy
So of the bahaviour would depend on the random order that AWS returns the list of all Placement Groups
* Use correct var, move cleanup for async
* Add changelog and tests. Fixes#65393. Fixes#65277.
* Kill off all long running async tasks from listen_ports_facts
* Update task to work with older jinja2
If user specifies a port number in vmware_vm_inventory plugin configuration,
then use that port to connect to vCenter rather than connecting to 443 which
is default port.
Fixes: #64096
* Finished implementing the "start" parameter to the nagios module. The backend functions already had it; this change just exposes it. This allows setting the time a Nagios outage begins rather than always starting at the time the module was run. If not provided, "start" defaults to the current time (preserving compability with existing playbooks).
* Changed default start time to None, as per comment by @goneri. This avoids initializing the variable twice.
* win_find - refactor to make more performance and use newer style
* win_find - refactor for performance improvements and alignment to find
* More path alignment to find
* Fix yamllint error
* Fix encrypt command output when using --stdin-name
Add a new line after reading input if input doesn't end with a new line
* Only print is we're in a tty
* Add changelog fragment
* Add test for print() call in module_utils and modules.
* Add changelog fragment.
* Add ignore.txt entries.
* Use blacklist plugin instead of adding a new.
* Update ignore.txt
Although it's not enforced that fail_json['msg'] should be a string
[1], I think it is pretty strongly implied.
In this case the failure_response['msg'] is sent through as the
fail_json['msg'], and the trailing commas here turn it into a tuple.
It's not clear if this is a typo or intended, but it does cause
problems for callbacks that expect this as a string (e.g. [2]).
Since there seems no point to having these values as a tuple, remove
the trailing commas so they return a string as per everywhere else.
[1] 4c589661c2/lib/ansible/module_utils/basic.py (L2078)
[2] https://review.opendev.org/#/c/696081
* win_share - Implement append paramtere for access rules
* changed fragment
* add test
* missing bracket
* removed whitespace
* Wrong number of lines
* Forgot the actual new parameter in the test
* community review
* Change option names
* version update
* Update tests.yml
* Add idempotence to rule_action: add
* Ensure `allow_duplicates: true` enables to run single role multiple times(#64902)
* Changed return value in `_load_roles` . Fixes#64902
* Add changelog fragment
* Add an integration test for the issue
* Fix changelog generation error and integration test.
* Fix yaml syntax error in changelog fragment
* The ssh key may be created manually prior the task execution with a
passphrase. And the task will be executed on the same key.
* The ssh key may be broken and not usable.
The module will check the private key and if the key is password
protected or broken, it will be overridden.
The check of the ssh key performed by retrieve the public key from the
private key.
Set the "self.force" check before the "isPrivateKeyValid" check.
In case of any issue with the "isPrivateKeyValid" function, the user
will be able to force the regeneration of the key with the "force: yes"
argument.
* ufw: escalate privileges in integration tests
A few of the integration tests for the UFW module forgot to `become`.
This is problematic if the test suite is executed as a non-privileged
user. This commit amends that by adding `become` when appropriate.
* ufw: add unit tests for direction and interface
Extend the unit tests for the UFW module to test the `direction` and
`interface` parameters. This will help in the implementation of a fix
for issue #63903.
* ufw: add support for interface_in and interface_out
The UFW module has support for specifying `direction` and `interface`
for UFW rules. Rules with these parameters are built such that
per-interface filtering only apply to a single direction based on the
value of `direction`.
Not being able to specify multiple interfaces complicates things for
`routed` rules where one might want to apply filtering only for a
specific combination of `in` and `out` interfaces.
This commit introduces two new parameters to the UFW module:
`interface_in` and `interface_out`. These rules are mutually exclusive
with the old `direction` and `interface` parameter because of the
ambiguity of having e.g.:
direction: XXX
interface: foo
interface_XXX: bar
Fixes#63903
* Elevate privileges for luks_device integration tests
Several tests in `key-management.yml` don't `become` before executing,
despite needing elevated privileges. This commit fixes that.
* Add passphrase support for luks_device
Previously, the luks_device module only worked with keyfiles. The
implication was that the key had to be written to disk before the module
could be used.
This commit implements support for opening, adding and removing
passphrases supplied as strings to the module.
Closes#52408
* proxmox: use 'release' key for version detection if possible
* proxmox: fix PEP issues
* add changelog fragment
* Uses LooseVersion for proxmox version detection
* move imports
* removes useless comment
* Replaced 'ansible_facts' by 'foreman_facts'
'foreman_facts' is the key that the foreman inventory script used
'ansible_facts' is a special key that is overwritten internally and has never worked in this inventory plugin
* Added changelog
Lookup 'first_found' returns empty list which results in
raw_params checking. Check NoneType for 'raw_params' before
proceeding.
Fixes: #64939
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Inventory CLI - Ignore settings for when vars plugins should run and just always run them
* Add note to porting guide
* Fix loading vars plugins
* changelog
* Remove a staging test for ansible-inventory since it ignores that setting
* docker_swarm_service: Sort lists when checking for changes
When two lists are checked for changes in this module, the lists are
reported changed when the order of the items is different. This PR
resolves this issue.
* docker_swarm_service: Minor typo fix
* docker_swarm_service: Another minor typo
* docker_swarm_service: Should use sorted(), not sort()
* docker_swarm_service: Sort lists of dictionaries
* docker_swarm_service: Fix style issues in tests
* docker_swarm_service: Updates to integration tests
* docker_swarm_service: Casting string types within lists when comparing
* docker_swarm_service: Special handling of unordered networks with ordered aliases
* docker_swarm_service: Sorting network lists
* docker_swarm_serivce: Better unit test code coverage for lists and networks
* docker_swarm_service: Fixed coding style for sanity tests
* docker_swarm_service: More coding style fixes
* docker_swarm_service: Ignoring test for Python < 3
* docker_swarm_service: Update to version info check for backwards compatibility
* docker_swarm_service: Added change fragment #63887
* docker_swarm_service: Better handling of missing sort key for dictionary of lists
* docker_swarm_service: Preventing sorts from modifying in-place
Co-Authored-By: Felix Fontein <felix@fontein.de>
* docker_swarm_service: Removed spurious import in test
* docker_swarm_service: Preventing sorts from modifying more data in-place
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Set name_version when version is not specified, fix#55097
This will default to installing the latest version available
* Add changelog fragment
* update changelog
self._get_user_property returns a string, so when doing a comparison
using this value, cast the second variable to a string so that the
comparison behaves correctly
* Add changelog
* Add to_text import
* Add integration test
* iam_user: use AnsibleAWSModule.client to fetch connection rather than C&P code
* iam_role: Add deprecation warning so we can switch purge_polices default behaviour from true to false
* iam_user/role/group: Rename 'managed_policy' and 'purge_policy'
Rename from singluar to plural (we accept a *list* of policies), and add aliases for the old values.
* Cleanup documentation
* Changelog
* ansible.utils.color.stringc: add wrap_nonvisible_chars flag in stringc
* add exaplanation for `wrap_nonvisible_chars` case in utils.stringc
* add changelog entry
* reworked iam_policy
* Deprecate policy_document option
* deprecate defaulting skip_duplicates to true
* No longer explicitly catch ParamValidationError.
ParamValidationErrror is already caught by ClientError
* Work with complex policy objects rather than json documents
comparisons can better cope with the special cases (eg True vs "True" )
* Enable check_mode tests and fix related 'changed' bug
* changelog
* doc cleanup based on review
* Implementing ability to specify certificates.
* Changelog fragment for rabbitmq_publish certificate checking
* Fixing version_added
* Reducing line size.
* Minor documentation updates.
* Update to add missing space.
Co-Authored-By: Felix Fontein <felix@fontein.de>
If two tags with same name and different category exists, vmware_tag_manager
used to take first found tag.
This commit use combination of tag and category to identify the category.
Fixes: #59379
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Revert most of PR #61605 commit e218c9814c
This removes the git error handling that converted all git errors into warnings.
* Fix ansible-test handling of git submodules.
Due to confusion between 'Custom Attributes' and 'Advanced options',
this change got in devel. Revert to original behavior i.e. customizing
custom values using vmware_guest is done in this PR.
Fixes: #64291
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* renamed module tls client auth parameters to avoid overlaping with ansible fetch_url
* added version_added info for params
* Updated version_added
Updated version_added info from 2.9 to 2.10
* Update pulp_repo.py
removed version_added for renamed params
* Apply suggestions from code review
added ca_cert alias and 'version_added'
Co-Authored-By: Mark Chappell <mchappel@redhat.com>
* Apply suggestions from code review
added old behavior for client_cert and client_key which will deprecate in 2.14
Co-Authored-By: Mark Chappell <mchappel@redhat.com>
* Update pulp_repo.py
fix for linting error ansibot is complaining
* added changelog fragment for 59522
* Apply suggestions from code review
more informative depreciation warning and changelog fragment
Co-Authored-By: Felix Fontein <felix@fontein.de>
* added mention for changes in client_key and client_cert behavior
* fixed too long line (linting)
* deprecated ca_cert alias to have consistent module params in Ansible 2.14
* fixed indentation for deprecation warning
* changed deprecated alias handling to argument_spec
* moved deprecated_aliases insied argument dict, thanks tremble
* suggestions from felixfontein
Move doc info about client_cert and client_key into its own paragraph
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Add full IPv6 support to win_dns_client - Fixes#55962
* Fix missing cast
* Add type to win_dns_client.py
* Remove version_added again, to hopefully make ansibot happy. Even though it was added as a response to the bot...
* Fix $params undefined error, that was introduced by fixing the "global variable" linting issue
* Fix casting error
* Fix inverted logic
* Fix rebase error
* Fix assignment to readonly variable
* Fix "reset IPv4 DNS back to DHCP adapter_name"
* Fix legacy windows server support (2008/2008R2)
* Fix 2k8
* Remove unecessary pslint ignore
* Added IPv6 tests, changelog fragment and further docs
This info about backing_disk_mode was renamed to backing_diskmode,
to keep backward compatability re-introducing backing_disk_mode along
with backing_diskmode info.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Restore module vmware_dns_config
* Remove domainname and change_hostname_to
* Changed version_added from 2.10 to '2.10'
* Add setup_attach_host: true to test case
* Add 'vcsim is not defined' block to integration tests
* Change 'result' to 'dns_config_result'
* Bugfix: Changing some static configurations while keeping others can crash the module
* Implement changing DNS config from DHCP to static on a cluster
* Update documentation for vmware_host_dns
* vmware_host_dns integration tests: Always revert to original DNS configuration, even if a test fails
* Deprecate vmware_dns_config
* Add support for multiple manager attributes configuration
* Updated version_added to 2.10
* Added support for modifying LC and system attributes
* Added support for LC and system attributes
* Pylint fixes
* Add support for multiple manager attributes
* Add support for multiple manager attributes
* Add support for multiple manager attributes
* add connect_as, username, password parameters
add tests
* fixed reference to undefined variable.
added version added to new options.
* add changelog fragment
* fix line endings
* use ansible facts to determine os version
remove unused iis version check
test checksum of iis configuration after backup
* correct assertion
* added more cleanup tasks.
* version added is now 2.10
* skip server 2008 r2 for now
* run tests on server 2012 and higher
* Adds win32_disk_drive object to win_disk_facts
* Names class parameter for Get-CimInstance as requested in the devdocs
* Maps whole class and adds docs
* Improve matching of disks when UniqueID is different format
* Improve logic for PNPDeviceID mapping
* Adds test for win32_disk_drive
* win_chocolatey: Fix error when choco.exe not found
* Slight tweak to check and added changelog fragment
* Removed ignore rule that's no longer needed
* win_domain_user: add retry logic for null user principal group
* win_domain_user.ps1: Fix "user without group" case use
* Added changelog fragment
* Fix up missing dollar sign
Use the --venv option instead.
This option was only available when running from source to test the ansible/ansible repository.
This will have no effect on testing collections or running from an installed version of Ansible.
Also update docs to reference the --venv option instead of the --tox option.
This is a fix for a regression introduced by Perfy. Since then we mainly
operate on host.name instead of the Host object. In a call to
set_nonpersistent_facts where we set ansible_failed_task and
ansible_failed_result variables we were still passing the object which
led to those vars being undefined.
Fixes#64789
While deleting gitlab user, several parameters such as email, name,
password are not required. This fix removes this requirement from the
module.
Fixes: #61921
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* win_domain_computer module: Minor documentation error
* Fix idempotence when name != samaccountname
* Added changelog
* Added unsupported alias for CI check
* win_acl no longer needs SeSecurityPrivilege
Set-ACL raises missing SeSecurityPrivilege error when the inheritance
from the parent directory is disabled.
* fixes test sanity
* registry rights can only be modified with Set-ACL
* add changelog
* Corrected Get-adcomputer
Corrected Get-adcomputer on "Remove-ConstructedState" and "Set-ConstructedState" functions.
resolved error: Unable to contact the server. This may be because this server does not exist, it is currently down, or it does not have the Active Directory Web Services running.
* Update lib/ansible/modules/windows/win_domain_computer.ps1
Co-Authored-By: Daniel-Sanchez-Fabregas <33929811+Daniel-Sanchez-Fabregas@users.noreply.github.com>
* Update win_domain_computer.ps1
changed
"-credential $credential" to "@extra_args" (Line 115 and 150)
corrected exception message (Line 122)
* Added changelog fragment, minor code tweak
* Ensure we work on only one user.
After the initial get/create use the GUID of the found/created user to
ensure we will not start to work with a different user. If we create a
user or modify it's attributes an he is not identified with the name
parameter afterwards this module fails in rather unpredictable ways.
This addressed #45298
* Use splatting create_args for creating user.
This prepars this for adding more optional create arguments without
nesting of condictions.
* Set the UserPrincipalName and SamAccountName on create.
Set the UserPrincipalName and SamAccountName on the create operation if
upn is given to ensure the User is created with a contollable
SamAccountName.
* Rename $username to $name.
$username is missleading as its not the SamAccountName.
* Add a identity parameter to win_domain_user
This gives the user full controll over how the user is identified in the
AD.
* Add version_added information for new parameter and fix yaml syntax.
* Added changelog fragment
wait_for_connection creates AnsiballZ_ping.py in temp directory,
which remains on remote machine even after playbook run.
Fixes: #62407
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add output_encoding_override params to win_command/win_shell (#54896)
This enhancement enables Ansible to parse the output of
localized commands that ignore the prompt code page.
* Added changelog and minor nits
* Set alter_sys=True instead of False to address backwards incompat
* ci_complete
* Add integration test
* ci_complete
* sanity
* ci_complete
* Changelog fragment
* Update import test and validate-modules to match
This fixes a regression that was caused by switching from copy() to
deepcopy() when 'saving' variables before templating. Since HostVars
did not implement the __deepcopy__() method, deepcopy returned incorrect
results when host vars were present in the variables.
Fixes#63940
* docker_login: Use with statement for accessing files (#64382)
* Update changelogs/fragments/64382-docker_login-fix-invalid-json.yml
Co-Authored-By: Felix Fontein <felix@fontein.de>
