* Fix mandatory statement error for junos modules
Fixes#40267
* Add error regex in junos terminal plugin to error out
in case of commit fails
* If commit fails add logic to discard changes before existing
else next task will result in error
* Add integration test
* Minor update
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
* Warn of standard behavior of 'default' key store
The default key store typically results in the key being stored as user. In instances where we're trying to install a cert to enable SSL binding in IIS, this will result in an unbind-able cert, as the IIS APPPOOL identity will not be able to read the private key, and presents a very cryptic error of 'A specified logon session does not exist'.
+label: docsite_pr
* fix trailing whitespace
* Use C(user) reference
* specify what's required for successful iis import
- store_location's default value is currently 'LocalMachine' but if this changes it could result in the documentation being inaccurate
- key_exportable is not required for a successful IIS import
* remove stray =
dang cat
Co-Authored-By: tdietrich513 <tom.dietrich@gmail.com>
* Fix example in ini.py
* Fix unittest in test_ini.py to pass CI as latest ansible returns list in
different order. To prevent such issues in future results are sorted
* PEP8 E501 styling improvements
Co-Authored-By: Sergii Golovatiuk <sgolovat@redhat.com>
Trying to use the apt module on a freshly install 16.04 Ubuntu VM with
"ansible -m apt -a 'name=* state=latest' all" fail with this backtrace:
Traceback (most recent call last):
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 1055, in <module>
main()
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 998, in main
upgrade(module, 'yes', force_yes, p['default_release'], use_apt_get, dpkg_options)
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 759, in upgrade
apt_cmd_path = m.get_bin_path(apt_cmd, required=True)
File \"/tmp/ansible_2inxygge/ansible_modlib.zip/ansible/module_utils/basic.py\", line 2182, in get_bin_path
File \"/usr/lib/python3.5/posixpath.py\", line 89, in join
genericpath._check_arg_types('join', a, *p)
File \"/usr/lib/python3.5/genericpath.py\", line 143, in _check_arg_types
(funcname, s.__class__.__name__)) from None
TypeError: join() argument must be str or bytes, not 'NoneType'
It seems that since aptitude is not installed on Xenial, so APTITUDE_CMD is None
and we later hit the bug in the upgrade function since it assume APTITUDE_CMD
is set.
* Improve the output when processing files
* Update docs/bin/plugin_formatter.py
Co-Authored-By: dagwieers <dag@wieers.com>
* Show progress indicator.
* Don't pp.pformat() huge structures when they aren't used anyway.
This saves ~10 seconds on my machine.
* Only show ASCII spinner if stdout is a TTY.
* Fix: E722 do not use bare 'except'
* Add GetManagerNicInventory command for Manager category, and tweak redfish_utils' get_nic_inventory to accommodate manager nic interfaces
* Remove get_manager_nic_inventory, since it is unnecessary while using get_manager in get_nic_inventory
* Rework get_nic_inventory() to take a resource_type as a string, which will be just the category parameter from redfish_facts, making it clearer
* remove extraneous blank line to conform with pep8
* Add GetManagerNicInventory example task to EXAMPLES docstring
* Add cryptography backend for openssl_privatekey.
* Adding ECC support.
No support for X25519 and X449, since they don't support serialization.
* Improve finterprint calculation to work with Python 3.
* Add fingerprint check.
* Fix typo.
* Use separate curve option for elliptic curves, and use type 'ECC'.
* Using curve names as defined in IANA registry.
* Bump minimal supported cryptography version. Older versions might work as well, but I couldn't test them.
* Improve documentation.
Fixes#48171Fixes#33742
Add force_host and issu options support in junos_package module
* Add force_host option to ignore warnings while installing package
* Add issu option to enable issu feature from Ansible
* PSRP: Add support for reconnection retries
This adds support for reconnection retries to overcome sudden Connection
Refused or other recoverable states. (Either because WinRM is (re)started,
or firewall changes make it briefly unavailable)
* Fixes from review comments
* Change test suite to fit expected behaviour
This reverts some changes from ansible/ansible@723daf3
If a line is found in the file, exactly or via regexp matching, it must
not be added again.
insertafter/insertbefore options are used only when a line is to be
inserted, to specify where it must be added.
* Implement the change in behaviour mentioned in the previous commit
* Fix comment to reflect what the code does
* Set the correct return message.
In these cases, the lines are added, not replaced.
* Add a changelog
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
* Port bundled distro to use optparse instead of argparse (py2.6)
* Use an absolute import to satisfy the current import testing harness
* Port from subprocess.check_output to subprocess.Popen.communicate() (py2.6)
* Add license location
The changes have been proposed upstream here:
https://github.com/nir0s/distro/pull/232
Upstream is contemplating a branch where everyone wanting python-2.6
support can collaborate without it becoming part of the regularly
supported releases.
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* New module - postgresql_idx
* New module postgresql_idx: added returns block
* New module postgresql_idx: fixed documentation, typos and added idxname to fail_json
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
* Windows Privileges - moved util code to it's own C# util
* Rename Enabler class to PrivilegeEnabler to remove ambiguity
* rename Utils to PrivilegeUtil
* fix missing util name changes
This documents two common issues related to rebooting Windows systems.
- Updates can take a long time being applied during reboot
- Reboots can cause the WinRM service to start before system has settled
Reporting of install failures was improperly guarded behind a list of
packages to install when the first element changed in a list was found.
This lead to the dnf module silently failing at times when it should not
fail.
Fixes issue 49759
This work enables to add sit tunnel via nmcli module
Signed-off-by: Susant Sahani susant@redhat.com
SUMMARY
ISSUE TYPE
Feature Pull Request
COMPONENT NAME
nmcli
ANSIBLE VERSION
2.8
ADDITIONAL INFORMATION
- nmcli:
state: present
type: sit
conn_name: sit_test1
autoconnect: yes
ip_tunnel_dev: enp0s8
ip_tunnel_local: 192.168.1.2
ip_tunnel_remote: 192.168.1.5
* win become: refactor and add support for passwordless become
* make tests more stable
* fix up dep message for Load-CommandUtils
* Add further check for System impersonation token
* re-add support for become with accounts that have no password
* doc fixes and slight code improvements
* fix doc sanity issue
* replace math round with ceiling to report the actually installed RAM for ansible_memtotal_mb
* add new variable ansible_memtotal to display TotalPhysicalMemory in bytes
add new variable ansible_swap_min to display initial pagefile size
add new variable ansible_swap_max to display maximum pagefile size
removed the variable ansible_swaptotal_mb
* output ansible_swap_min & ansible_swap_max value in bytes
* re-add the ansible_swaptotal_mb fact and fix the conversion of the TotalSwapSpaceSize value from kilobytes to MB
* indentation fix, replace tab with spaces
* Create Windows facts for ansible_virtualization_role and ansible_virtualization_type
* Create Windows facts for ansible_virtualization_role and ansible_virtualization_type
Updated formatting
* Removed executable flag on setup.ps1
* Changed Get-WMIObject to Get-CimInstance as Get-WMIObject has been deprecated and fails testing.
* Changed new variables to snake_case and also changed Get-CimInstance to Get-LazyCimInstance
* removed -class from Get-LazyCimInstance call as failed test.
this example shows two things not shown here already->
- dynamically looking up hosted zone id using the route53_zone module (vs knowing the ID we can use the name)
- showing an example of start_record_name which takes an entire record, not just a partial name
* Docs: Add a separate "seealso" section to the module docs
to list related modules and/or related references. This clears up the notes
section for things that are actual notes.
So you can add a section in your module documentation and four types of
references are possible.
seealso:
# Reference by module name
- module: aci_tenant
# Reference by module name, including description
- module: aci_tenant
description: ACI module to create tenants on a Cisco ACI fabric.
# Reference by rST documentation anchor
- ref: aci_guide
description: Detailed information on how to manage your ACI infrastructure using Ansible.
# Reference by Internet resource
- name: APIC Management Information Model reference
description: Complete reference of the APIC object model.
link: https://developer.cisco.com/docs/apic-mim-ref/
This PR also includes:
- Implements ansible-doc support
- Implements schema support for the seealso options
- Updates to the development documentation
- Rename filter convert_symbols_to_format to rst_ify, cfr the existing html_ify and tty_ify filters
- This makes the existing template a lot easier to read and fixes the confusion I had myself rereading the template (again).
- We fixed the possible suboption types (which was limited to 'bool' only)
* Use latest stable instead of devel docs
* Fix for 36950. Added support for missing options capabilities and root_device in properties of os_ironic.py ansible module
* Updated docstring to pass documentation validation
* Updated review comments from juliakreger
* version_added: "2.8"
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* k8s: add k8s_kind arg to KubernetesRawModule
Single–kind k8s modules (e.g. k8s_service) do not have a module
parameter called 'kind' and need to pass a static 'kind' on
KubernetesRawModule class creation. Hence this change.
* k8s: make 'validate' and 'wait' mod params optional
Not all k8s modules utilizing KubernetesRawModule will use these.
* k8s_service: new k8s module for handling Services
* Pluribus Networks pn access list ip module with unit test cases
* Changes according to ansibot standards in unit test modules
* Remove unwanted variables
* Removed unwanted super call
Previously we returned only nested attributes of the lists not of the
structs, this patch fixes it.
Signed-off-by: Ondra Machacek <omachace@redhat.com>
* [docker] Consolidating Python Boolean conversion for Docker API (#49563)
* [docker] Consolidating docker option min version checks (#49564)
* [docker] Moving option min version checks out of docker_swarm (#49564)
Also renaming Boolean cleanup function and fixing docker_container minimum
version check for network interfaces.
* Cleanup from PR feedback
* Bare minimum rip out cliconf
* nxapi changeover
* Update documentation, move options
* Memoize device_info
* Gratuitous rename to underscore use of local api implementation
Fixup eos module_utils like nxos
* Streamline version and image scans
* Expose get_capabilities through module_utils
* Add load_config to module_utils
* Support rpcs using both args and kwargs
* Add get_config for nxos
* Add get_diff
* module context, pulled from nxapi
We could probably do this correctly later
* Fix eos issues
* Limit connection._sub_plugin to only one plugin
* set ansible_os_family from name variable in os-release for clearlinux system
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add os_family for clear linux and clear linux mixes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* inventory plugins: try auto before ini
auto plugin should run before ini to avoid ini being able to parse
some plugin configuration YAML files successfully.
* Update comment
comment was added by 2ffe3c42bb but
related code was later removed by
506e6a0b2d.
Use a simple multiprocessing pipe to delay exiting the parent process
until after the child has been doubly forked.
Using a simple IPC to allow the forked process to start avoids the
control node waiting unnecessarily for lightly loaded systems.
* Fix various bugs related in reboot
- Use format strings for consistency and improve debug log messages
- Use local variables instead of class attributes in order to be thread safe
- Run setup module to get distribution and version
- Run find module to get full path of shutdown command
- Use ansible_os_family and ansible_distribution to find commands and args
- Use same command for all Solaris/SunOS distributions
- Move delay calculations to properties
- Reliably check for module run failure
- Fix bug in run_test_command() that accidentally made the method work properly
- Use better exceptions rather than Exception
- Use dict literals rather than constructors
- Correct _check_delay() so it always returns a value, not None
- Don't store and return result in run_test_command() because it's not used anywhere
- add test for post reboot command that fails
- test negative values for delay parameters
* Consolidate handler tracking
- Remove unused code. ci_complete
- unit test fixes. ci_complete
- Restore previous behavior of matching a single handler
- when notifying a host for a handler, return True if it was added, False otherwise, to reduce copied logic
- rename funcitons for clarity. ci_complete
- Remove handler logic for static includes which was disabled previously
- use the generic `package` module, this way it will cover dnf and yum
- to not specify the x86_64 arch, the package manager will pull the fine
version anyway
- with_items with package is deprecated
- libnm-qt-devel is only in Fedora 27 and 28.
Template lookup plugin now support variable_start_string and
variable_end_string, just like template module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
