.. _network_debug_troubleshooting: *************************************** Network Debug and Troubleshooting Guide *************************************** .. contents:: Topics Introduction ============ Starting with Ansible version 2.1, you can now use the familiar Ansible models of playbook authoring and module development to manage heterogeneous networking devices. Ansible supports a growing number of network devices using both CLI over SSH and API (when available) transports. This section discusses how to debug and troubleshoot network modules in Ansible 2.3. How to troubleshoot =================== This section covers troubleshooting issues with Network Modules. Errors generally fall into one of the following categories: :Authentication issues: * Not correctly specifying credentials * Remote device (network switch/router) not falling back to other other authentication methods * SSH key issues :Timeout issues: * Can occur when trying to pull a large amount of data * May actually be masking a authentication issue :Playbook issues: * Use of ``delegate_to``, instead of ``ProxyCommand`` * Not using ``connection: local`` .. warning: ``unable to open shell` The ``unable to open shell`` message is new in Ansible 2.3, it means that the ``ansible-connection`` daemon has not been able to successfully talk to the remote network device. This generally means that there is an authentication issue. See the "Authentication and connection issues" section in this this document for more information. .. _enable_network_logging: Enabling Networking logging and how to read the logfile ------------------------------------------------------- **Platforms:** Any Ansible 2.3 features improved logging to help diagnose and troubleshoot issues regarding Ansible Networking modules. Because logging is very verbose it is disabled by default. It can be enabled via the ``ANSIBLE_LOG_PATH`` and ``ANISBLE_DEBUG`` options:: # Specify the location for the log file export ANSIBLE_LOG_PATH=~/ansible.log # Run with 4*v for connection level verbosity ANSIBLE_DEBUG=True ansible-playbook -vvvv ... After Ansible has finished running you can inspect the log file: .. code:: 2017-03-30 13:19:52,740 p=28990 u=fred | creating new control socket for host veos01:22 as user admin 2017-03-30 13:19:52,741 p=28990 u=fred | control socket path is /home/fred/.ansible/pc/ca5960d27a 2017-03-30 13:19:52,741 p=28990 u=fred | current working directory is /home/fred/ansible/test/integration 2017-03-30 13:19:52,741 p=28990 u=fred | using connection plugin network_cli ... 2017-03-30 13:20:14,771 paramiko.transport userauth is OK 2017-03-30 13:20:15,283 paramiko.transport Authentication (keyboard-interactive) successful! 2017-03-30 13:20:15,302 p=28990 u=fred | ssh connection done, setting terminal 2017-03-30 13:20:15,321 p=28990 u=fred | ssh connection has completed successfully 2017-03-30 13:20:15,322 p=28990 u=fred | connection established to veos01 in 0:00:22.580626 From the log notice: * ``p=28990`` Is the PID (Process ID) of the ``ansible-connection`` process * ``u=fred`` Is the user `running` ansible, not the remote-user you are attempting to connect as * ``creating new control socket for host veos01:22 as user admin`` host:port as user * ``control socket path is`` location on disk where the persistent connection socket is created * ``using connection plugin network_cli`` Informs you that persistent connection is being used * ``connection established to veos01 in 0:00:22.580626`` Time taken to obtain a shell on the remote device .. note: Port None ``creating new control socket for host veos01:None`` If the log reports the port as ``None`` this means that the default port is being used. A future Ansible release will improve this message so that the port is always logged. Because the log files are verbose, you can use grep to look for specific information. For example, once you have identified the ```pid`` from the ``creating new control socket for host`` line you can search for other connection log entries:: grep "p=28990" $ANSIBLE_LOG_PATH Isolating an error ------------------ **Platforms:** Any As with any effort to troubleshoot it's important to simplify the test case as much as possible. For Ansible this can be done ensuring you are only running against one remote device: * Using ``ansible-playbook --limit switch1.example.net...`` * Using an ad-hoc ``ansible`` command `ad-hoc` refers to running Ansible to perform some quick command, using ``/usr/bin/ansible``, rather than the orchestration language, which is ``/usr/bin/ansible-playbook``, in this case we can ensure connectivity by attempting to execute a single command on the remote device:: ansible -m eos_command -a 'commands=?' -i inventory switch1.example.net -e 'ansible_connection=local' -u admin -k In the above example we: * Connect to ``switch1.example.net`` specified in the inventory file ``inventory`` * Use the module ``eos_command`` * Run the command ``?`` * Connect using the username ``admin`` * Inform ansible to prompt for the ssh password by specifying ``-k`` If you have SSH keys configured correctly you can drop the ``-k`` parameter If the connection still fails you can combine it the enable_network_logging_, for example:: # Specify the location for the log file export ANSIBLE_LOG_PATH=~/ansible.log # Run with 4*v for connection level verbosity ANSIBLE_DEBUG=True ansible -m eos_command -a 'commands=?' -i inventory switch1.example.net -e 'ansible_connection=local' -u admin -k Then review the log file and find the relevant error message in the rest of this document. .. For details on other ways to authenticate see LINKTOAUTHHOWTODOCS. .. _unable_to_open_shell: Category "Unable to open shell" =============================== **Platforms:** Any The ``unable to open shell`` message is new in Ansible 2.3, it means that the ``ansible-connection`` daemon has not been able to successfully talk to the remote network device. This generally means that there is an authentication issue. It is a "catch all" message, meaning you need to enable ``ANSIBLE_LOG_PATH`` to find the underlying issues. For example: .. code-block:: TASK [prepare_eos_tests : enable cli on remote device] ************************************************** fatal: [veos01]: FAILED! => {"changed": false, "failed": true, "msg": "unable to open shell"} or: .. code-block:: yaml TASK [ios_system : configure name_servers] ************************************************************* task path: fatal: [ios-csr1000v]: FAILED! => { "changed": false, "failed": true, "msg": "unable to open shell", "rc": 255 } Suggestions to resolve: Follow the steps detailed in enable_network_logging_. Once you've identified the error message from the log file, the specific solution can be found in the rest of this document. Error: "[Errno -2] Name or service not known" --------------------------------------------- **Platforms:** Any Indicates that the remote host you are trying to connect to can not be reached For example: .. code-block:: yaml 2017-04-04 11:39:48,147 p=15299 u=fred | control socket path is /home/fred/.ansible/pc/ca5960d27a 2017-04-04 11:39:48,147 p=15299 u=fred | current working directory is /home/fred/git/ansible-inc/stable-2.3/test/integration 2017-04-04 11:39:48,147 p=15299 u=fred | using connection plugin network_cli 2017-04-04 11:39:48,340 p=15299 u=fred | connecting to host veos01 returned an error 2017-04-04 11:39:48,340 p=15299 u=fred | [Errno -2] Name or service not known Suggestions to resolve: * If you are using the ``provider:`` options ensure that it's suboption ``host:`` is set correctly. * If you are not using ``provider:`` nor top-level arguments ensure your inventory file is correct. Error: "Authentication failed" ------------------------------ **Platforms:** Any Occurs if the credentials (username, passwords, or ssh keys) passed to ``ansible-connection`` (via ``ansible`` or ``ansible-playbook``) can not be used to connect to the remote device. For example: .. code-block:: yaml ESTABLISH CONNECTION FOR USER: cisco on PORT 22 TO ios01 Authentication failed. Suggestions to resolve: If you are specifying credentials via ``password:`` (either directly or via ``provider:``) or the environment variable ``ANSIBLE_NET_PASSWORD`` it is possible that ``paramiko`` (the Python SSH library that Ansible uses) is using ssh keys, and therefore the credentials you are specifying are being ignored. To find out if this is the case, disable "look for keys". This can be done like this: .. code-block:: yaml export ANSIBLE_PARAMIKO_LOOK_FOR_KEYS=False To make this a permanent change, add the following to your ``ansible.cfg`` file: .. code-block:: ini [paramiko_connection] look_for_keys = False Error: "connecting to host returned an error" or "Bad address" ------------------------------------------------------------------------- This may occur if the SSH fingerprint hasn't been added to Paramiko's (the Python SSH library) know hosts file. When using persistent connections with Paramiko, the connection runs in a background process. If the host doesn't already have a valid SSH key, by default Ansible will prompt to add the host key. This will cause connections running in background processes to fail. For example: .. code-block:: yaml 2017-04-04 12:06:03,486 p=17981 u=fred | using connection plugin network_cli 2017-04-04 12:06:04,680 p=17981 u=fred | connecting to host veos01 returned an error 2017-04-04 12:06:04,682 p=17981 u=fred | (14, 'Bad address') 2017-04-04 12:06:33,519 p=17981 u=fred | number of connection attempts exceeded, unable to connect to control socket 2017-04-04 12:06:33,520 p=17981 u=fred | persistent_connect_interval=1, persistent_connect_retries=30 Suggestions to resolve: Use ``ssh-keyscan`` to pre-populate the known_hosts. You need to ensure the keys are correct. .. code-block:: shell ssh-keyscan veos01 or You can tell Ansible to automatically accept the keys Environment variable method:: ANSIBLE_PARAMIKO_HOST_KEY_AUTO_ADD=True ansible-playbook ... ``ansible.cfg`` method: ansible.cfg .. code-block: ini [paramiko_connection] host_key_auto_add = True .. warning: Security warning Care should be taken before accepting keys. Error: "No authentication methods available" -------------------------------------------- For example: .. code-block:: yaml 2017-04-04 12:19:05,670 p=18591 u=fred | creating new control socket for host veos01:None as user admin 2017-04-04 12:19:05,670 p=18591 u=fred | control socket path is /home/fred/.ansible/pc/ca5960d27a 2017-04-04 12:19:05,670 p=18591 u=fred | current working directory is /home/fred/git/ansible-inc/ansible-workspace-2/test/integration 2017-04-04 12:19:05,670 p=18591 u=fred | using connection plugin network_cli 2017-04-04 12:19:06,606 p=18591 u=fred | connecting to host veos01 returned an error 2017-04-04 12:19:06,606 p=18591 u=fred | No authentication methods available 2017-04-04 12:19:35,708 p=18591 u=fred | number of connection attempts exceeded, unable to connect to control socket 2017-04-04 12:19:35,709 p=18591 u=fred | persistent_connect_interval=1, persistent_connect_retries=30 Suggestions to resolve: No password or SSH key supplied Clearing Out Persistent Connections ----------------------------------- **Platforms:** Any In Ansible 2.3, persistent connection sockets are stored in ``~/.ansible/pc`` for all network devices. When an Ansible playbook runs, the persistent socket connection is displayed when verbose output is specified. `` socket_path: /home/fred/.ansible/pc/f64ddfa760`` To clear out a persistent connection before it times out (the default timeout is 30 seconds of inactivity), simple delete the socket file. Timeout issues ============== Timeouts -------- All network modules support a timeout value that can be set on a per task basis. The timeout value controls the amount of time in seconds before the task will fail if the command has not returned. For example: .. FIXME: Detail error here Suggestions to resolve: .. code-block:: yaml - name: save running-config ios_command: commands: copy running-config startup-config provider: "{{ cli }}" timeout: 30 Some operations take longer than the default 10 seconds to complete. One good example is saving the current running config on IOS devices to startup config. In this case, changing the timeout value form the default 10 seconds to 30 seconds will prevent the task from failing before the command completes successfully. Playbook issues =============== This section details issues are caused by issues with the Playbook itself. Error: "invalid connection specified, expected connection=local, got ssh" ------------------------------------------------------------------------- **Platforms:** Any Network modules require that the connection is set to ``local``. Any other connection setting will cause the playbook to fail. Ansible will now detect this condition and return an error message: .. code-block:: yaml fatal: [nxos01]: FAILED! => { "changed": false, "failed": true, "msg": "invalid connection specified, expected connection=local, got ssh" } To fix this issue, set the connection value to ``local`` using one of the following methods: * Set the play to use ``connection: local`` * Set the task to use ``connection: local`` * Run ansible-playbook using the ``-c local`` setting Error: "Unable to enter configuration mode" ------------------------------------------- **Platforms:** eos and ios This occurs when you attempt to run a task that requires privileged mode in a user mode shell. For example: .. code-block:: yaml TASK [ios_system : configure name_servers] ***************************************************************************** task path: fatal: [ios-csr1000v]: FAILED! => { "changed": false, "failed": true, "msg": "unable to enter configuration mode", "rc": 255 } Suggestions to resolve: Add ``authorize: yes`` to the task. For example: .. code-block:: yaml - name: configure hostname ios_system: provider: hostname: foo authorize: yes register: result If the user requires a password to go into privileged mode, this can be specified with ``auth_pass``; if ``auth_pass`` isn't set, the environment variable ``ANSIBLE_NET_AUTHORIZE`` will be used instead. Add `authorize: yes` to the task. For example: .. code-block:: yaml - name: configure hostname ios_system: provider: hostname: foo authorize: yes auth_pass: "{{ mypasswordvar }}" register: result .. delete_to not honoured ---------------------- FIXME Do we get an error message FIXME Link to howto fixmes ====== Error: "number of connection attempts exceeded, unable to connect to control socket" ------------------------------------------------------------------------------------ **Platforms:** Any This occurs when Ansible wasn't able to connect to the remote device and obtain a shell with the timeout. This information is available when ``ANSIBLE_LOG_PATH`` is set see (FIXMELINKTOSECTION): .. code-block:: yaml less $ANSIBLE_LOG_PATH 2017-03-10 15:32:06,173 p=19677 u=fred | number of connection attempts exceeded, unable to connect to control socket 2017-03-10 15:32:06,174 p=19677 u=fred | persistent_connect_interval=1, persistent_connect_retries=10 2017-03-10 15:32:06,222 p=19669 u=fred | fatal: [veos01]: FAILED! => { Suggestions to resolve: Do stuff For example: .. code-block:: yaml Example stuff