ansible/test/integration/targets/enos_command

Ansible Role: enos_command - Exceutes any CLI command on switch and results are displayed.

---

Sends arbitrary commands to an ENOS node and returns the results read from the device. The C(enos_command) module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.

Requirements

---

• Ansible version 2.4 or later (Ansible installation documentation)
• Lenovo switches running ENOS version 8.4.1.0 or later
• an SSH connection to the Lenovo switch (SSH must be enabled on the network device)

Role Variables

---

Available variables are listed below, along with description.

The following are mandatory inventory variables:

Variable	Description
ansible_connection	Has to be network_cli
ansible_network_os	Has to be enos
ansible_ssh_user	Specifies the username used to log into the switch
ansible_ssh_pass	Specifies the password used to log into the switch

These are the various options the customer have in executing the enos_command modules:

Variable	Description
commands	List of commands to send to the remote device over the configured provider. The resulting output from the command is returned. If the I(wait_for) argument is provided, the module is not returned until the condition is satisfied or the number of retires as expired.
wait_for	List of conditions to evaluate against the output of the command. The task will wait for each condition to be true before moving forward. If the conditional is not true within the configured number of retries, the task fails. See examples.
match	The I(match) argument is used in conjunction with the I(wait_for) argument to specify the match policy. Valid values are C(all) or C(any). If the value is set to C(all) then all conditionals in the wait_for must be satisfied. If the value is set to C(any) then only one of the values must be satisfied.
retries	Specifies the number of retries a command should by tried before it is considered failed. The command is run on the target device every retry and evaluated against the I(wait_for) conditions.
interval	Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again.

Need to specify these variables in vars/main.yml under variable cli

Variable	Description
host	Has to be "{{ inventory_hostname }}"
port	Has to be22
username	User Name of switch
password	Password of switch
timeout	time out value for CLI
authorixe	Whether u have to enter enable mode for data collection.
auth_pass	Enable Password if required

Dependencies

---

• username.iptables - Configures the firewall and blocks all ports except those needed for web server and SSH access.
• username.common - Performs common server configuration.
• enos_command.py - This module file will be located at lib/ansible/modules/network/enos/ of Ansible installation.
• enos.py - This module util file will be located at lib/ansible/module_utils/network/enos of Ansible installation.
• enos.py - This module plugin file will be located at lib/ansible/plugins/action of Ansible installation.
• enos.py - This module plugin file will be located at lib/ansible/plugins/cliconf of Ansible installation.
• enos.py - This module plugin file will be located at lib/ansible/plugins/cliconf of Ansible installation.
• /etc/ansible/hosts - You must edit the /etc/ansible/hosts file with the device information of the switches designated as leaf switches. You may refer to cnos_command_sample_hosts for a sample configuration.

Ansible keeps track of all network elements that it manages through a hosts file. Before the execution of a playbook, the hosts file must be set up.

Open the /etc/ansible/hosts file with root privileges. Most of the file is commented out by using #. You can also comment out the entries you will be adding by using #. You need to copy the content of the hosts file for the role into the /etc/ansible/hosts file. The sample hosts file for the role is located in the main directory.

[enos_command]
10.241.105.24    ansible_connection=network_cli ansible_network_os=enos ansible_ssh_user=<username> ansible_ssh_pass=<password>

Note: You need to change the IP addresses to fit your specific topology. You also need to change the <username> and <password> to the appropriate values used to log into the specific Lenovo network devices.

Example Playbook

---

To execute an Ansible playbook, use the following command:

ansible-playbook enos_command_sample.yml -vvv

-vvv is an optional verbos command that helps identify what is happening during playbook execution. The playbook for each role is located in the main directory of the solution.

 - name: Module to  do some CLI Command configurations
   hosts: enos_command
   gather_facts: no
   connection: network_cli
   roles:
    - enos_command

License

---

Copyright (C) 2017 Lenovo, Inc.

This file is part of Ansible

Ansible is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, eithe r version 3 of the License, or (at your option) any later version.

Ansible is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PU RPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with Ansible. If not, see http://www.gnu.org/licenses/.