ansible/examples/play.yml
Abhijeet Kasurde 8915f262b4
misc typo fixes ()
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
2020-07-19 18:51:29 -05:00

525 lines
19 KiB
YAML

#!/usr/bin/env ansible-playbook
# ^ Trick: the above line can be used to make your play an executable
# you also must add 'x' permissions to the file
#
# this file is based on phred's 'pedantically commented playbook'
# https://github.com/phred/ansible-examples/blob/master/pedantically_commented_playbook.yml
#
---
# ^^^ YAML documents can begin with the document separator "---"
# and end with the "...", neither is needed for Ansible # as it does not
# support multiple YAML documents per file, but some linters incorrectly insist
# you must have it ....
#
# The '#' is a comment character, so any line starting with it will be ignored by Ansible.
# Blank lines are ignored, so can be used # to create spacing to your taste.
# Note about YAML: like Python, cares about whitespace, it requires actual spaces, tabs won't work.
# Indent consistently throughout.
# Two-space or four space indents is what most users prefer, but do whatever you like.
#
# If you're new to YAML, keep in mind that YAML documents, like XML
# documents, represent a tree-like structure of nodes and text. More
# familiar with JSON? Think of YAML as a strict (with spaces) but also more flexible
# JSON (fewer significant characters, e.g., :, "", {}, [] and liberal quoting).
# Also, JSON is a subset of YAML, so most YAML parser can read JSON just the same.
#
# The curious may read more about YAML at:
# http://www.yaml.org/spec/1.1/current.html
# there is a 1.2, but Ansible uses pyyaml which is mostly 1.1
# the following line configures 'vim' to handle 2 space indents.
# vim:ff=unix ts=2 sw=2 ai expandtab
###
# Notice the minus (-) on the line below, this is the start of a 'list' in YAML
# In Ansible this is the 'list of plays' which starts this playbook.
# Plays map the inventory hosts to the tasks, the most minimal play you can have
# just requires 'hosts'
- hosts: all
###########
# Play keyword: hosts
# Required: yes
# Description:
# The selection of hosts (or host) that the tasks in this play play should apply to.
#
## Example values:
# hosts: all -- applies to all hosts
# hosts: host1 -- apply ONLY to the host that inventory defines as 'host1'
# hosts: group1 -- apply to all hosts in group1
# hosts: group1,group2 -- apply to hosts in group1 & group2
# hosts: group1,host1 -- hosts in group1 AND host
#
## now using host patterns (TODO: url)
# hosts: group1,!group3 -- hosts in group1 that are not in group3
# hosts: group1,&group3 -- hosts in group1 that are also in group3
# hosts: group1:&group3 -- same as above, but using : instead of , as separator
# hosts: group1:!group2:&group3 -- hosts in group1 what are not in group2 but are also in group3
#
## Using a variable value for 'hosts'
#
# You can, in fact, set hosts to a variable, for example:
#
# hosts: '{{mygroups}}' -- apply to all hosts specified in the variable 'mygroups'
#
# This is handy for testing playbooks, running the same playbook against a
# staging environment before running it against production, occasional
# maintenance tasks, and other cases where you want to run the playbook
# against just a few systems rather than a whole group.
# Note that the variable cannot be set in inventory, since we need to know the hosts
# before we can use inventory variables. So normally 'extra vars' are used, as you can
# see below.
#
# If you set hosts as shown above, then you can specify which hosts to
# apply the playbook to on each run as so:
#
# ansible-playbook playbook.yml --extra-vars="mygroups=staging"
#
# Use --extra-vars to set the variable to any combination of groups, hostnames,
# or host patterns just like the examples in the previous section.
#
name: my heavily commented play
###########
# Play keyword: name
# Default: play###
# Required: no
# Description: Just a description to document the play
gather_facts: yes
###########
# Play keyword: gather_facts
# Default: None
# Required: no
# Description:
# This controls if the play will trigger a 'fact gathering task' (aka 'gather_facts' or 'setup' action) to get information about the remote target.
# These facts normally provide useful variables on which to base decisions and task inputs. For example `ansible_os_distribution` can tell us if
# the target is a RHEL, Ubuntu or FreeBSD machine (among others), number of CPUs, RAM, etc.
# TODO: url to fact gathering
remote_user: login_user
###########
# Play keyword: user
# Default: depends on connection plugin, for ssh it is 'current user executing Ansible'
# Required: no
# Description:
# Remote user to login on remote targets and 'normally' execute the tasks as
become: True
###########
# Play keyword: become
# Default: False
# Required: no
# Description:
# If True, always use privilege escalation to run tasks from this play, just like passing the
# --become flag to ansible or ansible-playbook.
become_user: root
###########
# Play keyword: become_user
# Default: None
# Required: no
# Description:
# When using privilege escalation this is the user you 'become' after login with the remote_user
# for example you login to the remote as 'login_user' then you 'become' root to execute the tasks
become_method: sudo
###########
# Play keyword: become_method
# Default: sudo
# Required: no
# Description:
# When using privilege escalation this chooses the become plugin to use for privilege escalation.
# use `ansible-doc -t become -l` to list all the options.
connection: ssh
###########
# Play keyword: connection
# Default: ssh
# Required: no
# Description:
# This sets which connection plugin Ansible will use to try to communicate with the target host.
# notable options are paramiko (python implementation of ssh, mostly useful in corner cases in which the ssh cli
# does not work well with the target. Also 'local' which forces a 'local fork' to execute the task, but normally
# what you really want is `delegate_to: localhost` see examples below in 'Run things locally!' entry.
# use `ansible-doc -t connection -l` to list all the options.
vars:
###########
# Play keyword: vars
# Default: none
# Required: no
# Description:
# Mapping of variables defined for this play, normally for use in templates or as variables for tasks.
# to get the value just use {{color}} to reference that value
color: brown
# Mapping structures allow complex variables structures, to use you can reference
# the variable name with {{web['memcache']}} when using nested key value or {{web}}
# when using the whole structure..
web:
memcache: 192.168.1.2
httpd: apache
# lists use a slightly different notation {{ mylist[1] }} to get 'b', they are 0 indexed.
mylist:
- a
- b
- c
# Variables can be dynamically set via Jinja templates, to be filled when consumed.
#
# In this playbook, this will always evaluate to False, because 'color'
# is set to 'brown' above.
#
# When ansible interprets the following, it will first expand 'color' to
# 'brown' and then evaluate 'brown' == 'blue' as a Jinja expression.
is_color_blue: "{{ color == 'blue' }}"
# TODO: (url variables)
vars_files:
##########
# Play keyword: vars_files
# Required: no
# Description:
# Specifies a list of YAML files to load variables from.
#
# Always evaluated after the 'vars' section, no matter which section
# occurs first in the playbook. Examples are below.
#
# Example YAML for a file to be included by vars_files:
# ---
# monitored_by: phobos.mars.nasa.gov
# fish_sticks: "good with custard"
# ... # (END OF DOCUMENT)
#
# Remove the indentation & comments of course, the '---' should be at
# the left margin in the variables file.
#
# Include a file from this absolute path
- /srv/ansible/vars/vars_file.yml
# Include a file from a path relative to this playbook
- vars/vars_file.yml
# By the way, variables set in 'vars' or as extra vars are available here.
- vars/{{something}}.yml
# It's also possible to pass an array of files, in which case
# Ansible will loop over the array and include the first file that
# exists. If none exist, ansible-playbook will halt with an error.
#
# An excellent way to handle platform-specific differences.
- [ 'vars/{{platform}}.yml', vars/default.yml ]
# Files in vars_files process in order, so later files can
# provide more specific configuration:
- [ 'vars/{{host}}.yml' ]
# Hey, but if you're doing host-specific variable files, you might
# consider setting the variable for a group in your inventory and
# adding your host to that group. Just a thought.
vars_prompt:
##########
# Play keyword: vars_prompt
# Required: no
# Description:
# A list of variables that Ansible will prompt for manual input each time this playbook
# runs. Used for sensitive data and also things like release numbers that
# vary on each deployment.
#
# Ansible won't prompts for this value if already provided, like when
# passed through --extra-vars, but not from inventory.
#
# Also it won't prompt if it detects that it is a non interactive session.
# For example, when called from cron.
#
- name: passphrase
prompt: "Please enter the passphrase for the SSL certificate"
private: yes
# The input won't be echoed back to the terminal when private (default yes)
# Not sensitive, but something that should vary on each playbook run.
- name: release_version
prompt: "Please enter a release tag"
private: no
# you can even have a default
- name: package_version
prompt: "Please enter a package version"
default: '1.0'
# You can find more advanced features in https://docs.ansible.com/ansible/latest/user_guide/playbooks_prompts.html
roles:
##########
# Play keyword: roles
# Required: no
# Description: A list of roles to import and execute in this play. Executes AFTER pre_tasks and play fact gathering, but before 'tasks'.
# TODO url roles + url to 'play stages'
tasks:
##########
# Play keyword: tasks
# Required: no
# Description: A list of tasks to perform in this play. Executes AFTER roles and before post_tasks
# A simple task
# Each task must have an action. 'name' is optional but very useful to document what the task does
- name: Check that the target can execute Ansible tasks
action: ping
##########
# Ansible modules do the work!, 'action' is not needed, you can use the 'action itself' as part of the task
- file: path=/tmp/secret mode=0600 owner=root group=root
#
# Format 'action' like above:
# <modulename>: <module parameters>
#
# Test your parameters using:
# ansible -m <module> -a "<module parameters>"
#
# Documentation for the stock modules:
# http://ansible.github.com/modules.html
# normally most will want to use 'k: v' notation instead of 'k=v' used above (but useful for adhoc execution).
# while both formats are mostly interchangable, `k: v` is more explicit, 'type friendly' and simpler to escape.
- name: Ensure secret is locked down
file:
path: /tmp/secret
mode: '0600'
owner: root
group: root
# note that 'action options' are indented inside the option, while 'task keywords' stay on the top level
##########
# Use variables in the task! It expands on use.
- name: Paint the server
command: echo {{color}}
# you can also define variables at the task level
- name: Ensure secret is locked down
file:
path: '{{secret_file}}'
mode: '0600'
owner: root
group: root
vars:
secret_file: /tmp/secret
##########
# Trigger handlers when things change!
#
# Most Ansible actions can detect and report when something changed.
# Like if file permissions were not the same as requested,
# a file's content is different or a package was installed (or removed)
# When a change is reported, the task assumes the 'changed' status.
# Ansible can optionally notify one or more Handlers.
# Handlers are like normal tasks, the main difference is that they only
# run when notified.
# A common use is to restart a service after updating it's configuration file.
# https://docs.ansible.com/ansible/latest/user_guide/playbooks_intro.html#handlers-running-operations-on-change
# TODO: explain handler per stage execution
# This will call the "Restart Apache" handler whenever 'copy' alters
# the remote httpd.conf.
- name: Update the Apache config
copy:
src: httpd.conf
dest: /etc/httpd/httpd.conf
notify: Restart Apache
# Here's how to specify more than one handler
- name: Update our app's configuration
copy:
src: myapp.conf
dest: /etc/myapp/production.conf
notify:
- Restart Apache
- Restart Redis
##########
# Include tasks from another file!
#
# Ansible can insert a list of tasks from another file. The file
# must represent a list of tasks, which is different than a play.
#
# Task list format:
# ---
# - name: create user
# user: name={{myuser}} color={{color}}
#
# - name: add user to group
# user: name={{myuser}} groups={{hisgroup}} append=true
# ... # (END OF DOCUMENT)
#
# A 'tasks' YAML file represents a list of tasks. Don't use playbook
# YAML for a 'tasks' file.
#
# Remove the indentation & comments of course, the '---' should be at
# the left margin in the variables file.
# TODO: point at import_playbook, includes and roles
# In this example the user will be 'sklar'
# and 'color' will be 'red' inside new_user.yml
- import_tasks: tasks/new_user.yml
vars:
myuser: sklar
color: red
# In this example the user will be 'mosh'
# and $color will be 'mauve' inside new_user.yml
- import_tasks: tasks/new_user.yml
vars:
myuser: mosh
color: mauve
##########
# Run a task on each thing in a list!
#
# Ansible provides a simple loop facility. If 'loop' is provided for
# a task, then the task will be run once for each item in the provided
# list. Each iteration will create the 'item' variable with a different value.
- name: Create a file named via variable in /tmp
file: path=/tmp/{{item}} state=touched
loop:
- tangerine
- lemon
- name: Loop using a variable
file: path=/tmp/{{item}} state=touched
loop: '{{mylist}}'
vars:
# defined here, but could be anywhere before the task runs
# also note that YAML lists can be flush with their key,
# we normally indent for clarity, but this form is also correct.
mylist:
- tangerine
- lemon
##########
# Conditionally execute tasks!
#
# Sometimes you only want to run an action when a under certain conditions.
# Ansible supports using conditional Jinja expression, executing the task only when 'True'.
#
# If you're trying to run an task only when a value changes,
# consider rewriting the task as a handler and using 'notify' (see below).
#
- name: "shutdown all ubuntu"
command: /sbin/shutdown -t now
when: '{{is_ubuntu|bool}}'
- name: "shutdown the if host is in the government"
command: /sbin/shutdown -t now
when: "{{inventory_hostname in groups['government']}}"
# another way to write the same.
- name: "shutdown the if host is in the government"
command: /sbin/shutdown -t now
when: "{{'government' in group_names}}"
# Ansible has some built in variables, you can check them here (TODO url)
# inventory_hostname is the name of the current host the task is executing for (derived from the hosts: keyword)
# group_names has the list of groups the current host (inventory_hostname) is part of
# groups is a mapping of the inventory groups with the list of hosts that belong to them
##########
# Run things as other users!
#
# Each task has optional keywords that control which
# user a task should run as and whether or not to use privilege escalation
# (like sudo or su) to switch to that user.
- name: login in as postgres and dump all postgres databases
shell: pg_dumpall -w -f /tmp/backup.psql
remote_user: postgres
become: False
- name: login normally, but sudo to postgres to dump all postgres databases
shell: pg_dumpall -w -f /tmp/backup.psql
become: true
become_user: postgres
become_method: sudo
##########
# Run things locally!
#
# Each task can also be delegated to the control host
- name: create tempfile
local_action: shell dd if=/dev/urandom of=/tmp/random.txt count=100
# which is equivalent to the following
- name: create tempfile
shell: dd if=/dev/urandom of=/tmp/random.txt count=100
delegate_to: localhost
# delegate_to can use any target, but for the case above, it is the same as using local_action
# TODO url to delegation and implicit localhost
handlers:
##########
# Play keyword: handlers
# Required: no
# Description:
# Handlers are tasks that run when another task has changed something.
# See above for examples on how to trigger them.
# The format to define a handler is exactly the same as for tasks.
# Note that if multiple tasks notify the same handler in a playbook run
# that handler will only run once for that host.
#
# Handlers are referred to by name or using the listen keyword.
# They will be run in the order declared in the playbook.
# For example: if a task were to notify the handlers in reverse order like so:
#
# - task: ensure file does not exist
# file:
# name: /tmp/lock.txt
# state: absent
# notify:
# - Restart application
# - Restart nginx
#
# The "Restart nginx" handler will still run before the "Restart application"
# handler because it is declared first in this playbook.
# this one can only be called by name
- name: Restart nginx
service:
name: nginx
state: restarted
# this one can be called by name or via any entry in the listen keyword
- name: redis restarter
service:
name: redis
state: restarted
listen:
- Restart redis
# Any module can be used for the handler action
# even though this can be triggered multiple ways and times
# it will only execute once per host
- name: restart application that should really be a service
command: /srv/myapp/restart.sh
listen:
- Restart application
- restart myapp
# It's also possible to include handlers from another file. Structure is
# the same as a tasks file, see the tasks section above for an example.
- import_tasks: handlers/site.yml
# NOTE: this is not a complete list of all possible keywords in a play or task (TODO: url playbook object and keywords), just an example of very common options.
# below is the "totally optional" YAML "End of document" marker.
...