719 lines
26 KiB
ReStructuredText
719 lines
26 KiB
ReStructuredText
.. _cli_parsing:
|
|
|
|
*****************************************
|
|
Parsing semi-structured text with Ansible
|
|
*****************************************
|
|
|
|
The :ref:`cli_parse <ansible_collections.ansible.netcommon.cli_parse_module>` module parses semi-structured data such as network configurations into structured data to allow programmatic use of the data from that device. You can pull information from a network device and update a CMDB in one playbook. Use cases include automated troubleshooting, creating dynamic documentation, updating IPAM (IP address management) tools and so on.
|
|
|
|
|
|
.. contents::
|
|
:local:
|
|
|
|
|
|
Understanding the CLI parser
|
|
=============================
|
|
|
|
The `ansible.netcommon <https://galaxy.ansible.com/ansible/netcommon>`_ collection version 1.2.0 or later includes the :ref:`cli_parse <ansible_collections.ansible.netcommon.cli_parse_module>` module that can run CLI commands and parse the semi-structured text output. You can use the ``cli_parse`` module on a device, host, or platform that only supports a command-line interface and the commands issued return semi-structured text. The ``cli_parse`` module can either run a CLI command on a device and return a parsed result or can simply parse any text document. The ``cli_parse`` module includes cli_parser plugins to interface with a variety of parsing engines.
|
|
|
|
Why parse the text?
|
|
--------------------
|
|
|
|
Parsing semi-structured data such as network configurations into structured data allows programmatic use of the data from that device. Use cases include automated troubleshooting, creating dynamic documentation, updating IPAM (IP address management) tools and so on. You may prefer to do this with Ansible natively to take advantage of native Ansible constructs such as:
|
|
|
|
- The ``when`` clause to conditionally run other tasks or roles
|
|
- The ``assert`` module to check configuration and operational state compliance
|
|
- The ``template`` module to generate reports about configuration and operational state information
|
|
- Templates and ``command`` or ``config`` modules to generate host, device, or platform commands or configuration
|
|
- The current platform ``facts`` modules to supplement native facts information
|
|
|
|
By parsing semi-structured text into Ansible native data structures, you can take full advantage of Ansible's network modules and plugins.
|
|
|
|
|
|
When not to parse the text
|
|
---------------------------
|
|
|
|
You should not parse semi-structured text when:
|
|
|
|
- The device, host, or platform has a RESTAPI and returns JSON.
|
|
- Existing Ansible facts modules already return the desired data.
|
|
- Ansible network resource modules exist for configuration management of the device and resource.
|
|
|
|
Parsing the CLI
|
|
=========================
|
|
|
|
The ``cli_parse`` module includes the following cli_parsing plugins:
|
|
|
|
``native``
|
|
The native parsing engine built into Ansible and requires no addition python libraries
|
|
``xml``
|
|
Convert XML to an Ansible native data structure
|
|
``textfsm``
|
|
A python module which implements a template based state machine for parsing semi-formatted text
|
|
``ntc_templates``
|
|
Predefined ``textfsm`` templates packages supporting a variety of platforms and commands
|
|
``ttp``
|
|
A library for semi-structured text parsing using templates, with added capabilities to simplify the process
|
|
``pyats``
|
|
Uses the parsers included with the Cisco Test Automation & Validation Solution
|
|
``json``
|
|
Converts JSON output at the CLI to an Ansible native data structure
|
|
|
|
Although Ansible contains a number of plugins that can convert XML to Ansible native data structures, the ``cli_parse`` module runs the command on devices that return XML and returns the converted data in a single task.
|
|
|
|
Because ``cli_parse`` uses a plugin based architecture, it can use additional parsing engines from any Ansible collection.
|
|
|
|
.. note::
|
|
|
|
The ``ansible.netcommon.native`` and ``ansible.netcommon.json`` parsing engines are fully supported with a Red Hat Ansible Automation Platform subscription. Red Hat Ansible Automation Platform subscription support is limited to the use of the ``ntc_templates``, pyATS, ``textfsm``, ``xmltodict``, public APIs as documented.
|
|
|
|
Parsing with the native parsing engine
|
|
--------------------------------------
|
|
|
|
The native parsing engine is included with the ``cli_parse`` module. It uses data captured using regular expressions to populate the parsed data structure. The native parsing engine requires a YAML template file to parse the command output.
|
|
|
|
Networking example
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
This example uses the output of a network device command and applies a native template to produce an output in Ansible structured data format.
|
|
|
|
The ``show interface`` command output from the network device looks as follows:
|
|
|
|
.. code-block:: console
|
|
|
|
Ethernet1/1 is up
|
|
admin state is up, Dedicated Interface
|
|
Hardware: 100/1000/10000 Ethernet, address: 5254.005a.f8bd (bia 5254.005a.f8bd)
|
|
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
|
|
reliability 255/255, txload 1/255, rxload 1/255
|
|
Encapsulation ARPA, medium is broadcast
|
|
Port mode is access
|
|
full-duplex, auto-speed
|
|
Beacon is turned off
|
|
Auto-Negotiation is turned on FEC mode is Auto
|
|
Input flow-control is off, output flow-control is off
|
|
Auto-mdix is turned off
|
|
Switchport monitor is off
|
|
EtherType is 0x8100
|
|
EEE (efficient-ethernet) : n/a
|
|
Last link flapped 4week(s) 6day(s)
|
|
Last clearing of "show interface" counters never
|
|
<...>
|
|
|
|
|
|
Create the native template to match this output and store it as ``templates/nxos_show_interface.yaml``:
|
|
|
|
.. code-block:: yaml
|
|
|
|
---
|
|
- example: Ethernet1/1 is up
|
|
getval: '(?P<name>\S+) is (?P<oper_state>\S+)'
|
|
result:
|
|
"{{ name }}":
|
|
name: "{{ name }}"
|
|
state:
|
|
operating: "{{ oper_state }}"
|
|
shared: true
|
|
|
|
- example: admin state is up, Dedicated Interface
|
|
getval: 'admin state is (?P<admin_state>\S+),'
|
|
result:
|
|
"{{ name }}":
|
|
name: "{{ name }}"
|
|
state:
|
|
admin: "{{ admin_state }}"
|
|
|
|
- example: " Hardware: Ethernet, address: 5254.005a.f8b5 (bia 5254.005a.f8b5)"
|
|
getval: '\s+Hardware: (?P<hardware>.*), address: (?P<mac>\S+)'
|
|
result:
|
|
"{{ name }}":
|
|
hardware: "{{ hardware }}"
|
|
mac_address: "{{ mac }}"
|
|
|
|
|
|
This native parser template is structured as a list of parsers, each containing the following key-value pairs:
|
|
|
|
- ``example`` - An example line of the text line to be parsed
|
|
- ``getval`` - A regular expression using named capture groups to store the extracted data
|
|
- ``result`` - A data tree, populated as a template, from the parsed data
|
|
- ``shared`` - (optional) The shared key makes the parsed values available to the rest of the parser entries until matched again.
|
|
|
|
The following example task uses ``cli_parse`` with the native parser and the example template above to parse the ``show interface`` command from a Cisco NXOS device:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with native"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
set_fact: interfaces
|
|
|
|
Taking a deeper dive into this task:
|
|
|
|
- The ``command`` option provides the command you want to run on the device or host. Alternately, you can provide text from a previous command with the ``text`` option instead.
|
|
- The ``parser`` option provides information specific to the parser engine.
|
|
- The ``name`` suboption provides the fully qualified collection name (FQCN) of the parsing engine (``ansible.netcommon.native``).
|
|
- The ``cli_parse`` module, by default, looks for the template in the templates directory as ``{{ short_os }}_{{ command }}.yaml``.
|
|
|
|
- The ``short_os`` in the template filename is derived from either the host ``ansible_network_os`` or ``ansible_distribution``.
|
|
- Spaces in the network or host command are replace with ``_`` in the ``command`` portion of the template filename. In this example, the ``show interfaces`` network CLI command becomes ``show_interfaces`` in the filename.
|
|
|
|
.. note::
|
|
|
|
``ansible.netcommon.native`` parsing engine is fully supported with a Red Hat Ansible Automation Platform subscription.
|
|
|
|
Lastly in this task, the ``set_fact`` option sets the following ``interfaces`` fact for the device based on the now-structured data returned from ``cli_parse``:
|
|
|
|
.. code-block:: yaml
|
|
|
|
Ethernet1/1:
|
|
hardware: 100/1000/10000 Ethernet
|
|
mac_address: 5254.005a.f8bd
|
|
name: Ethernet1/1
|
|
state:
|
|
admin: up
|
|
operating: up
|
|
Ethernet1/10:
|
|
hardware: 100/1000/10000 Ethernet
|
|
mac_address: 5254.005a.f8c6
|
|
<...>
|
|
|
|
|
|
Linux example
|
|
^^^^^^^^^^^^^
|
|
|
|
You can also use the native parser to run commands and parse output from Linux hosts.
|
|
|
|
The output of a sample Linux command (``ip addr show``) looks as follows:
|
|
|
|
.. code-block:: bash
|
|
|
|
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
|
|
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
|
|
inet 127.0.0.1/8 scope host lo
|
|
valid_lft forever preferred_lft forever
|
|
inet6 ::1/128 scope host
|
|
valid_lft forever preferred_lft forever
|
|
2: enp0s31f6: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
|
|
link/ether x2:6a:64:9d:84:19 brd ff:ff:ff:ff:ff:ff
|
|
3: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
|
|
link/ether x6:c2:44:f7:41:e0 brd ff:ff:ff:ff:ff:ff permaddr d8:f2:ca:99:5c:82
|
|
|
|
Create the native template to match this output and store it as ``templates/fedora_ip_addr_show.yaml``:
|
|
|
|
.. code-block:: yaml
|
|
|
|
---
|
|
- example: '1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000'
|
|
getval: |
|
|
(?x) # free-spacing
|
|
\d+:\s # the interface index
|
|
(?P<name>\S+):\s # the name
|
|
<(?P<properties>\S+)> # the properties
|
|
\smtu\s(?P<mtu>\d+) # the mtu
|
|
.* # gunk
|
|
state\s(?P<state>\S+) # the state of the interface
|
|
result:
|
|
"{{ name }}":
|
|
name: "{{ name }}"
|
|
loopback: "{{ 'LOOPBACK' in stats.split(',') }}"
|
|
up: "{{ 'UP' in properties.split(',') }}"
|
|
carrier: "{{ not 'NO-CARRIER' in properties.split(',') }}"
|
|
broadcast: "{{ 'BROADCAST' in properties.split(',') }}"
|
|
multicast: "{{ 'MULTICAST' in properties.split(',') }}"
|
|
state: "{{ state|lower() }}"
|
|
mtu: "{{ mtu }}"
|
|
shared: True
|
|
|
|
- example: 'inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0'
|
|
getval: |
|
|
(?x) # free-spacing
|
|
\s+inet\s(?P<inet>([0-9]{1,3}\.){3}[0-9]{1,3}) # the ip address
|
|
/(?P<bits>\d{1,2}) # the mask bits
|
|
result:
|
|
"{{ name }}":
|
|
ip_address: "{{ inet }}"
|
|
mask_bits: "{{ bits }}"
|
|
|
|
.. note::
|
|
|
|
The ``shared`` key in the parser template allows the interface name to be used in subsequent parser entries. The use of examples and free-spacing mode with the regular expressions makes the template easier to read.
|
|
|
|
The following example task uses ``cli_parse`` with the native parser and the example template above to parse the Linux output:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: Run command and parse
|
|
ansible.netcommon.cli_parse:
|
|
command: ip addr show
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
set_fact: interfaces
|
|
|
|
This task assumes you previously gathered facts to determine the ``ansible_distribution`` needed to locate the template. Alternately, you could provide the path in the ``parser/template_path`` option.
|
|
|
|
|
|
Lastly in this task, the ``set_fact`` option sets the following ``interfaces`` fact for the host, based on the now-structured data returned from ``cli_parse``:
|
|
|
|
.. code-block:: yaml
|
|
|
|
lo:
|
|
broadcast: false
|
|
carrier: true
|
|
ip_address: 127.0.0.1
|
|
mask_bits: 8
|
|
mtu: 65536
|
|
multicast: false
|
|
name: lo
|
|
state: unknown
|
|
up: true
|
|
enp64s0u1:
|
|
broadcast: true
|
|
carrier: true
|
|
ip_address: 192.168.86.83
|
|
mask_bits: 24
|
|
mtu: 1500
|
|
multicast: true
|
|
name: enp64s0u1
|
|
state: up
|
|
up: true
|
|
<...>
|
|
|
|
|
|
Parsing JSON
|
|
-------------
|
|
|
|
Although Ansible will natively convert serialized JSON to Ansible native data when recognized, you can also use the ``cli_parse`` module for this conversion.
|
|
|
|
Example task:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse as json"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface | json
|
|
parser:
|
|
name: ansible.netcommon.json
|
|
register: interfaces
|
|
|
|
Taking a deeper dive into this task:
|
|
|
|
- The ``show interface | json`` command is issued on the device.
|
|
- The output is set as the ``interfaces`` fact for the device.
|
|
- JSON support is provided primarily for playbook consistency.
|
|
|
|
.. note::
|
|
|
|
The use of ``ansible.netcommon.json`` is fully supported with a Red Hat Ansible Automation Platform subscription
|
|
|
|
Parsing with ntc_templates
|
|
----------------------------
|
|
|
|
The ``ntc_templates`` python library includes pre-defined ``textfsm`` templates for parsing a variety of network device commands output.
|
|
|
|
Example task:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with ntc_templates"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.ntc_templates
|
|
set_fact: interfaces
|
|
|
|
Taking a deeper dive into this task:
|
|
|
|
- The ``ansible_network_os`` of the device is converted to the ntc_template format ``cisco_nxos``. Alternately, you can provide the ``os`` with the ``parser/os`` option instead.
|
|
- The ``cisco_nxos_show_interface.textfsm`` template, included with the ``ntc_templates`` package, parses the output.
|
|
- See `the ntc_templates README <https://github.com/networktocode/ntc-templates/blob/master/README.md>`_ for additional information about the ``ntc_templates`` python library.
|
|
|
|
.. note::
|
|
|
|
Red Hat Ansible Automation Platform subscription support is limited to the use of the ``ntc_templates`` public APIs as documented.
|
|
|
|
|
|
This task and and the predefined template sets the following fact as the ``interfaces`` fact for the host:
|
|
|
|
.. code-block:: yaml
|
|
|
|
interfaces:
|
|
- address: 5254.005a.f8b5
|
|
admin_state: up
|
|
bandwidth: 1000000 Kbit
|
|
bia: 5254.005a.f8b5
|
|
delay: 10 usec
|
|
description: ''
|
|
duplex: full-duplex
|
|
encapsulation: ARPA
|
|
hardware_type: Ethernet
|
|
input_errors: ''
|
|
input_packets: ''
|
|
interface: mgmt0
|
|
ip_address: 192.168.101.14/24
|
|
last_link_flapped: ''
|
|
link_status: up
|
|
mode: ''
|
|
mtu: '1500'
|
|
output_errors: ''
|
|
output_packets: ''
|
|
speed: 1000 Mb/s
|
|
- address: 5254.005a.f8bd
|
|
admin_state: up
|
|
bandwidth: 1000000 Kbit
|
|
bia: 5254.005a.f8bd
|
|
delay: 10 usec
|
|
|
|
|
|
Parsing with pyATS
|
|
----------------------
|
|
|
|
``pyATS`` is part of the Cisco Test Automation & Validation Solution. It includes many predefined parsers for a number of network platforms and commands. You can use the predefined parsers that are part of the ``pyATS`` package with the ``cli_parse`` module.
|
|
|
|
Example task:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with pyats"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.pyats
|
|
set_fact: interfaces
|
|
|
|
|
|
Taking a deeper dive into this task:
|
|
|
|
- The ``cli_parse`` modules converts the ``ansible_network_os`` automatically (in this example, ``ansible_network_os`` set to ``cisco.nxos.nxos``, converts to ``nxos`` for pyATS. Alternately, you can set the OS with the ``parser/os`` option instead.
|
|
- Using a combination of the command and OS, the pyATS selects the following parser: https://pubhub.devnetcloud.com/media/genie-feature-browser/docs/#/parsers/show%2520interface.
|
|
- The ``cli_parse`` module sets ``cisco.ios.ios`` to ``iosxe`` for pyATS. You can override this with the ``parser/os`` option.
|
|
- ``cli_parse`` only uses the predefined parsers in pyATS. See the `pyATS documentation <https://developer.cisco.com/docs/pyats/>`_ and the full list of `pyATS included parsers <https://pubhub.devnetcloud.com/media/genie-feature-browser/docs/#/parsers>`_.
|
|
|
|
.. note::
|
|
|
|
Red Hat Ansible Automation Platform subscription support is limited to the use of the pyATS public APIs as documented.
|
|
|
|
|
|
This task sets the following fact as the ``interfaces`` fact for the host:
|
|
|
|
.. code-block:: yaml
|
|
|
|
mgmt0:
|
|
admin_state: up
|
|
auto_mdix: 'off'
|
|
auto_negotiate: true
|
|
bandwidth: 1000000
|
|
counters:
|
|
in_broadcast_pkts: 3
|
|
in_multicast_pkts: 1652395
|
|
in_octets: 556155103
|
|
in_pkts: 2236713
|
|
in_unicast_pkts: 584259
|
|
rate:
|
|
in_rate: 320
|
|
in_rate_pkts: 0
|
|
load_interval: 1
|
|
out_rate: 48
|
|
out_rate_pkts: 0
|
|
rx: true
|
|
tx: true
|
|
delay: 10
|
|
duplex_mode: full
|
|
enabled: true
|
|
encapsulations:
|
|
encapsulation: arpa
|
|
ethertype: '0x0000'
|
|
ipv4:
|
|
192.168.101.14/24:
|
|
ip: 192.168.101.14
|
|
prefix_length: '24'
|
|
link_state: up
|
|
<...>
|
|
|
|
|
|
Parsing with textfsm
|
|
---------------------
|
|
|
|
``textfsm`` is a Python module which implements a template-based state machine for parsing semi-formatted text.
|
|
|
|
The following sample``textfsm`` template is stored as ``templates/nxos_show_interface.textfsm``
|
|
|
|
.. code-block:: text
|
|
|
|
|
|
Value Required INTERFACE (\S+)
|
|
Value LINK_STATUS (.+?)
|
|
Value ADMIN_STATE (.+?)
|
|
Value HARDWARE_TYPE (.\*)
|
|
Value ADDRESS ([a-zA-Z0-9]+.[a-zA-Z0-9]+.[a-zA-Z0-9]+)
|
|
Value BIA ([a-zA-Z0-9]+.[a-zA-Z0-9]+.[a-zA-Z0-9]+)
|
|
Value DESCRIPTION (.\*)
|
|
Value IP_ADDRESS (\d+\.\d+\.\d+\.\d+\/\d+)
|
|
Value MTU (\d+)
|
|
Value MODE (\S+)
|
|
Value DUPLEX (.+duplex?)
|
|
Value SPEED (.+?)
|
|
Value INPUT_PACKETS (\d+)
|
|
Value OUTPUT_PACKETS (\d+)
|
|
Value INPUT_ERRORS (\d+)
|
|
Value OUTPUT_ERRORS (\d+)
|
|
Value BANDWIDTH (\d+\s+\w+)
|
|
Value DELAY (\d+\s+\w+)
|
|
Value ENCAPSULATION (\w+)
|
|
Value LAST_LINK_FLAPPED (.+?)
|
|
|
|
Start
|
|
^\S+\s+is.+ -> Continue.Record
|
|
^${INTERFACE}\s+is\s+${LINK_STATUS},\sline\sprotocol\sis\s${ADMIN_STATE}$$
|
|
^${INTERFACE}\s+is\s+${LINK_STATUS}$$
|
|
^admin\s+state\s+is\s+${ADMIN_STATE},
|
|
^\s+Hardware(:|\s+is)\s+${HARDWARE_TYPE},\s+address(:|\s+is)\s+${ADDRESS}(.*bia\s+${BIA})*
|
|
^\s+Description:\s+${DESCRIPTION}
|
|
^\s+Internet\s+Address\s+is\s+${IP_ADDRESS}
|
|
^\s+Port\s+mode\s+is\s+${MODE}
|
|
^\s+${DUPLEX}, ${SPEED}(,|$$)
|
|
^\s+MTU\s+${MTU}.\*BW\s+${BANDWIDTH}.\*DLY\s+${DELAY}
|
|
^\s+Encapsulation\s+${ENCAPSULATION}
|
|
^\s+${INPUT_PACKETS}\s+input\s+packets\s+\d+\s+bytes\s\*$$
|
|
^\s+${INPUT_ERRORS}\s+input\s+error\s+\d+\s+short\s+frame\s+\d+\s+overrun\s+\d+\s+underrun\s+\d+\s+ignored\s\*$$
|
|
^\s+${OUTPUT_PACKETS}\s+output\s+packets\s+\d+\s+bytes\s\*$$
|
|
^\s+${OUTPUT_ERRORS}\s+output\s+error\s+\d+\s+collision\s+\d+\s+deferred\s+\d+\s+late\s+collision\s\*$$
|
|
^\s+Last\s+link\s+flapped\s+${LAST_LINK_FLAPPED}\s\*$$
|
|
|
|
The following task uses the example template for ``textfsm`` with the ``cli_parse`` module.
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with textfsm"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.textfsm
|
|
set_fact: interfaces
|
|
|
|
Taking a deeper dive into this task:
|
|
|
|
- The ``ansible_network_os`` for the device (``cisco.nxos.nxos``) is converted to ``nxos``. Alternately you can provide the OS in the ``parser/os`` option instead.
|
|
- The textfsm template name defaulted to ``templates/nxos_show_interface.textfsm`` using a combination of the OS and command run. Alternately you can override the generated template path with the ``parser/template_path`` option.
|
|
- See the `textfsm README <https://github.com/google/textfsm>`_ for details.
|
|
- ``textfsm`` was previously made available as a filter plugin. Ansible users should transition to the ``cli_parse`` module.
|
|
|
|
.. note::
|
|
|
|
Red Hat Ansible Automation Platform subscription support is limited to the use of the ``textfsm`` public APIs as documented.
|
|
|
|
This task sets the following fact as the ``interfaces`` fact for the host:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- ADDRESS: X254.005a.f8b5
|
|
ADMIN_STATE: up
|
|
BANDWIDTH: 1000000 Kbit
|
|
BIA: X254.005a.f8b5
|
|
DELAY: 10 usec
|
|
DESCRIPTION: ''
|
|
DUPLEX: full-duplex
|
|
ENCAPSULATION: ARPA
|
|
HARDWARE_TYPE: Ethernet
|
|
INPUT_ERRORS: ''
|
|
INPUT_PACKETS: ''
|
|
INTERFACE: mgmt0
|
|
IP_ADDRESS: 192.168.101.14/24
|
|
LAST_LINK_FLAPPED: ''
|
|
LINK_STATUS: up
|
|
MODE: ''
|
|
MTU: '1500'
|
|
OUTPUT_ERRORS: ''
|
|
OUTPUT_PACKETS: ''
|
|
SPEED: 1000 Mb/s
|
|
- ADDRESS: X254.005a.f8bd
|
|
ADMIN_STATE: up
|
|
BANDWIDTH: 1000000 Kbit
|
|
BIA: X254.005a.f8bd
|
|
|
|
|
|
Parsing with TTP
|
|
-----------------
|
|
|
|
TTP is a Python library for semi-structured text parsing using templates. TTP uses a jinja-like syntax to limit the need for regular expressions. Users familiar with jinja templating may find the TTP template syntax familiar.
|
|
|
|
The following is an example TTP template stored as ``templates/nxos_show_interface.ttp``:
|
|
|
|
.. code-block:: jinja
|
|
|
|
{{ interface }} is {{ state }}
|
|
admin state is {{ admin_state }}{{ ignore(".\*") }}
|
|
|
|
The following task uses this template to parse the ``show interface`` command output:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with ttp"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.ttp
|
|
set_fact: interfaces
|
|
|
|
Taking a deeper dive in this task:
|
|
|
|
- The default template path ``templates/nxos_show_interface.ttp`` was generated using the ``ansible_network_os`` for the host and ``command`` provided.
|
|
- TTP supports several additional variables that will be passed to the parser. These include:
|
|
|
|
- ``parser/vars/ttp_init`` - Additional parameter passed when the parser is initialized.
|
|
- ``parser/vars/ttp_results`` - Additional parameters used to influence the parser output.
|
|
- ``parser/vars/ttp_vars`` - Additional variables made available in the template.
|
|
|
|
- See the `TTP documentation <https://ttp.readthedocs.io>`_ for details.
|
|
|
|
|
|
The task sets the follow fact as the ``interfaces`` fact for the host:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- admin_state: up,
|
|
interface: mgmt0
|
|
state: up
|
|
- admin_state: up,
|
|
interface: Ethernet1/1
|
|
state: up
|
|
- admin_state: up,
|
|
interface: Ethernet1/2
|
|
state: up
|
|
|
|
|
|
Converting XML
|
|
-----------------
|
|
|
|
Although Ansible contains a number of plugins that can convert XML to Ansible native data structures, the ``cli_parse`` module runs the command on devices that return XML and returns the converted data in a single task.
|
|
|
|
This example task runs the ``show interface`` command and parses the output as XML:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse as xml"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface | xml
|
|
parser:
|
|
name: ansible.netcommon.xml
|
|
set_fact: interfaces
|
|
|
|
.. note::
|
|
|
|
Red Hat Ansible Automation Platform subscription support is limited to the use of the ``xmltodict`` public APIs as documented.
|
|
|
|
This task sets the ``interfaces`` fact for the host based on this returned output:
|
|
|
|
.. code-block:: yaml
|
|
|
|
nf:rpc-reply:
|
|
'@xmlns': http://www.cisco.com/nxos:1.0:if_manager
|
|
'@xmlns:nf': urn:ietf:params:xml:ns:netconf:base:1.0
|
|
nf:data:
|
|
show:
|
|
interface:
|
|
__XML__OPT_Cmd_show_interface_quick:
|
|
__XML__OPT_Cmd_show_interface___readonly__:
|
|
__readonly__:
|
|
TABLE_interface:
|
|
ROW_interface:
|
|
- admin_state: up
|
|
encapsulation: ARPA
|
|
eth_autoneg: 'on'
|
|
eth_bia_addr: x254.005a.f8b5
|
|
eth_bw: '1000000'
|
|
|
|
|
|
Advanced use cases
|
|
===================
|
|
|
|
The ``cli_parse`` module supports several features to support more complex uses cases.
|
|
|
|
Provide a full template path
|
|
-----------------------------
|
|
|
|
Use the ``template_path`` option to override the default template path in the task:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with native"
|
|
ansible.netcommon.cli_parse:
|
|
command: show interface
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
template_path: /home/user/templates/filename.yaml
|
|
|
|
|
|
Provide command to parser different than the command run
|
|
-----------------------------------------------------------
|
|
|
|
Use the ``command`` suboption for the ``parser`` to configure the command the parser expects if it is different from the command ``cli_parse`` runs:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: "Run command and parse with native"
|
|
ansible.netcommon.cli_parse:
|
|
command: sho int
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
command: show interface
|
|
|
|
Provide a custom OS value
|
|
--------------------------------
|
|
|
|
Use the ``os`` suboption to the parser to directly set the OS instead of using ``ansible_network_os`` or ``ansible_distribution`` to generate the template path or with the specified parser engine:
|
|
|
|
.. code-block:: yaml
|
|
|
|
- name: Use ios instead of iosxe for pyats
|
|
ansible.netcommon.cli_parse:
|
|
command: show something
|
|
parser:
|
|
name: ansible.netcommon.pyats
|
|
os: ios
|
|
|
|
- name: Use linux instead of fedora from ansible_distribution
|
|
ansible.netcommon.cli_parse:
|
|
command: ps -ef
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
os: linux
|
|
|
|
|
|
Parse existing text
|
|
--------------------
|
|
|
|
Use the ``text`` option instead of ``command`` to parse text collected earlier in the playbook.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# using /home/user/templates/filename.yaml
|
|
- name: "Parse text from previous task"
|
|
ansible.netcommon.cli_parse:
|
|
text: "{{ output['stdout'] }}"
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
template_path: /home/user/templates/filename.yaml
|
|
|
|
# using /home/user/templates/filename.yaml
|
|
- name: "Parse text from file"
|
|
ansible.netcommon.cli_parse:
|
|
text: "{{ lookup('file', 'path/to/file.txt') }}"
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
template_path: /home/user/templates/filename.yaml
|
|
|
|
# using templates/nxos_show_version.yaml
|
|
- name: "Parse text from previous task"
|
|
ansible.netcommon.cli_parse:
|
|
text: "{{ sho_version['stdout'] }}"
|
|
parser:
|
|
name: ansible.netcommon.native
|
|
os: nxos
|
|
command: show version
|
|
|
|
|
|
.. seealso::
|
|
|
|
* :ref:`develop_cli_parse_plugins`
|