- Add RequireAdminOnWindows to the list of blessed tags - Fix a bug in Get-PesterTag where we accepted 'Slow' as a proper priority - Fix missed comma in Start-PSPester parameters - Add documentation about new Pester tag - Fix finishing logic for Start-PSPester -Unelevate
14 KiB
Executable file
Writing Pester Tests
Note that this document does not replace the documents found in the Pester project. This is just some quick tips and suggestions for creating Pester tests for this project. The Pester community is vibrant and active, if you have questions about Pester or creating tests, the Pester Wiki has a lot of great information.
When creating tests, keep the following in mind:
- Tests should not be overly complicated and test too many things
- boil down your tests to their essence, test only what you need
- Tests should be as simple as they can
- Tests should generally not rely on any other test
Examples: Here's the simplest of tests
Describe "A variable can be assigned and retrieved" {
It "Create a variable and make sure it's value is correct" {
$a = 1
$a | Should be 1
}
}
If you need to do type checking, that can be done as well
Describe "One is really one" {
It "Compare 1 to 1" {
$a = 1
$a | Should be 1
}
It "1 is really an int" {
$i = 1
$i.GetType() | Should Be "int"
}
}
alternatively, you could do the following:
Describe "One is really one" {
It "Compare 1 to 1" {
$a = 1
$a | Should be 1
}
It "1 is really an int" {
$i = 1
$i.GetType() | Should Be ([System.Int32])
}
}
If you are checking for proper errors, do that in a try/catch
, and then check FullyQualifiedErrorId
. Checking against FullyQualifiedErrorId
is recommended because it does not change based on culture as an error message might.
...
it "Get-Item on a nonexisting file should have error PathNotFound" {
try
{
get-item "ThisFileCannotPossiblyExist" -ErrorAction Stop
throw "No Exception!"
}
catch
{
$_.FullyQualifiedErrorId | should be "PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand"
}
}
Note that if get-item were to succeed, a different FullyQualifiedErrorId would be thrown and the test will fail because the FQErrorId is wrong. This is the suggested path because Pester wants to check the error message, which will likely not work here because of localized builds, but the FullyQualifiedErrorId is constant regardless of the locale.
Describe/Context/It
For creation of PowerShell tests, the Describe block is the level of granularity suggested and one of three tags should be used: "CI", "Feature", or "Scenario". If the tag is not provided, tests in that describe block will be run any time tests are executed.
Describe
Creates a logical group of tests. All Mocks and TestDrive contents defined within a Describe block are scoped to that Describe; they will no longer be present when the Describe block exits. A `Describe block may contain any number of Context and It blocks.
Context
Provides logical grouping of It blocks within a single Describe block. Any Mocks defined inside a Context are removed at the end of the Context scope, as are any files or folders added to the TestDrive during the Context block's execution. Any BeforeEach or AfterEach blocks defined inside a Context also only apply to tests within that Context .
It
The It block is intended to be used inside of a Describe or Context Block. If you are familiar with the AAA pattern (Arrange-Act-Assert), the body of the It block is the appropriate location for an assert. The convention is to assert a single expectation for each It block. The code inside of the It block should throw a terminating error if the expectation of the test is not met and thus cause the test to fail. The name of the It block should expressively state the expectation of the test.
Admin privileges in tests
Tests that require admin privileges on windows should be additionally marked with 'RequireAdminOnWindows' Pester tag. In the AppVeyor CI, we run two different passes:
- The pass with exclusion of tests with 'RequireAdminOnWindows' tag
- The pass where we run only 'RequireAdminOnWindows' tests
In each case, tests are executed with appropriate privileges.
Selected Features
Test Drive
A PSDrive is available for file activity during a tests and this drive is limited to the scope of a single Describe block. The contents of the drive are cleared when a context block is exited. A test may need to work with file operations and validate certain types of file activities. It is usually desirable not to perform file activity tests that will produce side effects outside of an individual test. Pester creates a PSDrive inside the user's temporary drive that is accessible via a names PSDrive TestDrive:. Pester will remove this drive after the test completes. You may use this drive to isolate the file operations of your test to a temporary store.
The following example illustrates the feature:
function Add-Footer($path, $footer) {
Add-Content $path -Value $footer
}
Describe "Add-Footer" {
$testPath="TestDrive:\test.txt"
Set-Content $testPath -value "my test text."
Add-Footer $testPath "-Footer"
$result = Get-Content $testPath
It "adds a footer" {
(-join $result) | Should Be("my test text.-Footer")
}
}
When this test completes, the contents of the TestDrive PSDrive will be removed.
Parameter Generation
$testCases = @(
@{ a = 0; b = 1; ExpectedResult = 1 }
@{ a = 1; b = 0; ExpectedResult = 1 }
@{ a = 1; b = 1; ExpectedResult = 0 }
@{ a = 0; b = 0; ExpectedResult = 0 }
)
Describe "A test" {
It "<a> -xor <b> should be <expectedresult>" -testcase $testcases {
param ($a, $b, $ExpectedResult)
$a -xor $b | Should be $ExpectedResult
}
}
You can also construct loops and pass values as parameters, including the expected value, but Pester does this for you.
Mocking
Mocks the behavior of an existing command with an alternate implementation. This creates new behavior for any existing command within the scope of a Describe or Context block. The function allows you to specify a script block that will become the command's new behavior. The following example illustrates simple use:
Context "Get-Random is not random" {
Mock Get-Random { return 3 }
It "Get-Random returns 3" {
Get-Random | Should be 3
}
}
More information may be found on the wiki
Free Code in a Describe block
Code execution in Pester can be very subtle and can cause issues when executing test code. The execution of code which lays outside of the usual code blocks may not happen as you expect. Consider the following:
Describe it {
Write-Host -For DarkRed "Before Context"
Context "subsection" {
Write-Host -for DarkRed "Before BeforeAll"
BeforeAll { write-host -for Blue "In Context BeforeAll" }
Write-Host -for DarkRed "After BeforeAll"
Write-Host -for DarkRed "Before AfterAll"
AfterAll { Write-Host -for Blue "In Context AfterAll" }
Write-Host -for DarkRed "After AfterAll"
BeforeEach { Write-Host -for Blue "In BeforeEach" }
AfterEach { Write-Host -for Blue "In AfterEach" }
Write-Host -for DarkRed "Before It"
It "should not be a surprise" {
1 | should be 1
}
Write-Host -for DarkRed "After It"
}
Write-Host -for DarkRed "After Context"
Write-Host -for DarkGreen "Before Describe BeforeAll"
BeforeAll { Write-Host -for DarkGreen "In Describe BeforeAll" }
AfterAll { Write-Host -for DarkGreen "In Describe AfterAll" }
}
Now, when run, you can see the execution schedule
PS# invoke-pester c:\temp\pester.demo.tests.ps1
Describing it
In Describe BeforeAll
Before Context
Context subsection
In Context BeforeAll
Before BeforeAll
After BeforeAll
Before AfterAll
After AfterAll
Before It
In BeforeEach
[+] should not be a surprise 79ms
In AfterEach
After It
In Context AfterAll
After Context
Before Describe BeforeAll
In Describe AfterAll
Tests completed in 79ms
Passed: 1 Failed: 0 Skipped: 0 Pending: 0
The DESCRIBE BeforeAll block is executed before any other code even though it was at the bottom of the Describe block, so if state is set elsewhere in the describe BLOCK, that state will not be visible (as the code will not yet been run). Notice, too, that the BEFOREALL block in Context is executed before any other code in that block.
Generally, you should have code reside in one of the code block elements of [Before|After][All|Each]
, especially if those block rely on state set by free code elsewhere in the block.
Skipping tests in bulk
Sometimes it is beneficial to skip all the tests in a particular Describe
block. For example, tests which are not applicable to a platform could be skipped, and they would be reported as skipped. The following is an example of how this may be done:
Describe "Should not run these tests on non-Windows platforms" {
BeforeAll {
$originalDefaultParameterValues = $PSDefaultParameterValues.Clone()
if ( ! $IsWindows ) {
$PSDefaultParameterValues["it:skip"] = $true
}
}
AfterAll {
$global:PSDefaultParameterValues = $originalDefaultParameterValues
}
Context "Block 1" {
It "This block 1 test 1" {
1 | should be 1
}
It "This is block 1 test 2" {
1 | should be 1
}
}
Context "Block 2" {
It "This block 2 test 1" {
2 | should be 1
}
It "This is block 2 test 2" {
2 | should be 1
}
}
}
Here is the output when run on a Linux distribution:
Describing Should not run these tests on non-Windows platforms
Context Block 1
[!] This block 1 test 1 691ms
[!] This is block 1 test 2 114ms
Context Block 2
[!] This block 2 test 1 73ms
[!] This is block 2 test 2 6ms
and here is the output when run on a Windows distribution:
Describing Should not run these tests on non-Windows platforms
Context Block 1
[+] This block 1 test 1 86ms
[+] This is block 1 test 2 33ms
Context Block 2
[-] This block 2 test 1 52ms
Expected: {1}
But was: {2}
22: 2 | should be 1
at <ScriptBlock>, <No file>: line 22
[-] This is block 2 test 2 77ms
Expected: {1}
But was: {2}
25: 2 | should be 1
at <ScriptBlock>, <No file>: line 25
this technique uses the $PSDefaultParameterValues
feature of PowerShell to temporarily set the It block parameter -skip
to true (or in the case of Windows, it is not set at all)
Multi-line strings
You may want to have a test like
It 'tests multi-line string' {
Get-MultiLineString | Should Be @'
first line
second line
'@
}
There are problems with using here-strings with verifying the output results. The reason for it are line-ends.
They cause problems for two reasons:
- They are different on different platforms (
\r\n
on windows and\n
on unix). - Even on the same system, they depends on the way how the repo was cloned.
Particularly, in the default AppVeyour CI windows image, you will get \n
line ends in all your files.
That causes problems, because at runtime Get-MultiLineString
would likely produce \r\n
line ends on windows.
Some workaround could be added, but they are sub-optimal and make reading test code harder.
function normalizeEnds([string]$text)
{
$text -replace "`r`n?|`n", "`r`n"
}
It 'tests multi-line string' {
normalizeEnds (Get-MultiLineString) | Should Be (normalizeEnds @'
first line
second line
'@)
}
When appropriate, you can avoid creating multi-line strings at the first place. These commands create an array of strings:
Get-Content
Out-String -Stream
Pester Do and Don't
Do
- Name your files .tests.ps1
- Keep tests simple
- Test only what you need
- Reduce dependencies
- Be sure to tag your
Describe
blocks based on their purpose- Tag
CI
indicates that it will be run as part of the continuous integration process. These should be unit test like, and generally take less than a second. - Tag
Feature
indicates a higher level feature test (we will run these on a regular basis), for example, tests which go to remote resources, or test broader functionality - Tag
Scenario
indicates tests of integration with other features (these will be run on a less regular basis and test even broader functionality than feature tests.
- Tag
- Make sure that
Describe
/Context
/It
descriptions are useful- The error message should not be the place where you describe the test
- Use
Context
to group tests- Multiple
Context
blocks can help you group your test suite into logical sections
- Multiple
- Use
BeforeAll
/AfterAll
/BeforeEach
/AfterEach
instead of custom initiators - Prefer Try-Catch for expected errors and check $_.fullyQualifiedErrorId (don't use
should throw
) - Use
-testcases
when iterating over multipleIt
blocks - Use code coverage functionality where appropriate
- Use
Mock
functionality when you don't have your entire environment - Avoid free code in a
Describe
block- Use
[Before|After][Each|All]
see Free Code in a Describe block
- Use
- Avoid creating or using test files outside of TESTDRIVE:
- TESTDRIVE: has automatic clean-up
- Keep in mind that we are creating cross platform tests
- Avoid using the registry
- Avoid using COM
- Avoid being too specific about the count of a resource as these can change platform to platform
- ex: checking for the count of loaded format files, check rather for format data for a specific type
Don't
- Don't have too many evaluations in a single It block
- The first
Should
failure will stop that block
- The first
- Don't use
Should
outside of anIt
Block - Don't use the word "Error" or "Fail" to test a positive case
- ex: "Get-Childitem TESTDRIVE: shouldn't fail", rather "Get-ChildItem should be able to retrieve file listing from TESTDRIVE"