37a480e0cd [net] Add addpeeraddress RPC method (John Newbery)
ae8051bbd8 [test] Test that getnodeaddresses() can return all known addresses (John Newbery)
f26502e9fc [addrman] Specify max addresses and pct when calling GetAddresses() (John Newbery)
Pull request description:
Currently addrman only allows a maximum of 1000 records or 23% of all records to be returned in a call to `GetAddr()`. Relax this limit and have the client specify the max records they want. For p2p, behaviour is unchanged (but the rate limiting is set inside net_processing, where it belongs). For RPC, `getnodeaddresses` can now return the complete addrman, which is helpful for testing and monitoring.
Also add a test-only RPC `addpeeraddress`, which adds an IP address:port to addrman. This is helpful for testing (eg #18991).
ACKs for top commit:
naumenkogs:
utACK 37a480e0cd
laanwj:
Code review and lightly manually tested ACK 37a480e0cd
Tree-SHA512: f86dcd410aaebaf6e9ca18ce6f23556e5e4649c1325577213d873aa09967298e65ab2dc19a72670641ae92211a923afda1fe124a82e9d2c1cad73d478ef27fdc
dac7a111bd refactor: test: use _ variable for unused loop counters (Sebastian Falbesoner)
Pull request description:
This tiny PR substitutes Python loops in the form of `for x in range(N): ...` by `for _ in range(N): ...` where applicable. The idea is indicating to the reader that a block (or statement, in list comprehensions) is just repeated N times, and that the loop counter is not used in the body, hence using the throwaway variable. This is already done quite often in the current tests (see e.g. `$ git grep "for _ in range("`). Another alternative would be using `itertools.repeat` (according to Python core developer Raymond Hettinger it's [even faster](https://twitter.com/raymondh/status/1144527183341375488)), but that doesn't seem to be widespread in use and I'm not sure about a readability increase.
The only drawback I see is that whenever one wants to debug loop iterations, one would need to introduce a loop variable again. Reviewing this is basically a no-brainer, since tests would fail immediately if a a substitution has taken place on a loop where the variable is used.
Instances to replace were found by `$ git grep "for.*in range("` and manually checked.
ACKs for top commit:
darosior:
ACK dac7a111bd
instagibbs:
manual inspection ACK dac7a111bd
practicalswift:
ACK dac7a111bd -- the updated code is easier to reason about since the throwaway nature of a variable is expressed explicitly (using the Pythonic `_` idiom) instead of implicitly. Explicit is better than implicit was we all know by now :)
Tree-SHA512: 5f43ded9ce14e5e00b3876ec445b90acda1842f813149ae7bafa93f3ac3d510bb778e2c701187fd2c73585e6b87797bb2d2987139bd1a9ba7d58775a59392406
9e165d0de4 test: Wait for 'cmpctblock' in p2p_compactblocks when it is expected (Ben Woosley)
Pull request description:
This is a more narrowly-construed wait which eliminates the possibility of the
wait being triggered by other messages.
Note `received_block_announcement` reflect three possible messages:
edec7f7c25/test/functional/p2p_compactblocks.py (L34-L53)
Prompted by looking into: #19449
ACKs for top commit:
laanwj:
Code review ACK 9e165d0de4
theStack:
ACK 9e165d0de4
Tree-SHA512: bc4a9c8bf031c8a7efb40d9625feaa3fd1f56f3b75da7034944af71ccea44328a6c708ab0c13fea85fb7cf4fd9043fe90eb94a25e95b2d42be44c2962b4904ce
fa4dfd215f test: Wait until is_connected in add_p2p_connection (MarcoFalke)
Pull request description:
Moving the wait_until from the individual test scripts to the test framework simplifies two tests
ACKs for top commit:
jnewbery:
Code review ACK fa4dfd215f
theStack:
ACK fa4dfd215f☕
Tree-SHA512: 36eda7eb323614a4c4f9215f1d7b40b9f9c4036d1c08eb701ea705f3e2986fdabd2fc558965a6aadabeed861034aeaeef3c00f968ca17ed7a27e42e506cda87d
566aada386 Test that wtxid relay peers add wtxid to reject filter (Gregory Sanders)
0fea6ede1b Restore test case for p2p transaction blinding (Gregory Sanders)
Pull request description:
Introduced in ca10a03add then erroneously removed in 8d8099e97a. The restored line is how we are
checking that the node will still re-request a specific txid given a witness-related failure.
ACKs for top commit:
fjahr:
tACK 566aada386
Tree-SHA512: be2b75b5eddb88019b79cc798f9922ca7347ccbb2210b8d4eae93fdde62e2cbb614b5247cb2fbd7ee3577dbe053875a9b62c5747aace8617f12790b8fccdeab4
9f88ded82b test addition of unknown segwit spends to txid reject filter (Gregory Sanders)
7989901c7e Add txids with non-standard inputs to reject filter (Suhas Daftuar)
Pull request description:
Our policy checks for non-standard inputs depend only on the non-witness
portion of a transaction: we look up the scriptPubKey of the input being
spent from our UTXO set (which is covered by the input txid), and the p2sh
checks only rely on the scriptSig portion of the input.
Consequently it's safe to add txids of transactions that fail these checks to
the reject filter, as the witness is irrelevant to the failure. This is helpful
for any situation where we might request the transaction again via txid (either
from txid-relay peers, or if we might fetch the transaction via txid due to
parent-fetching of orphans).
Further, in preparation for future witness versions being deployed on the
network, ensure that WITNESS_UNKNOWN transactions are rejected in
AreInputsStandard(), so that transactions spending v1 (or greater) witness
outputs will fall into this category of having their txid added to the reject
filter.
ACKs for top commit:
ajtowns:
ACK 9f88ded82b - code review
jnewbery:
Code review ACK 9f88ded82b
ariard:
Code Review/Tested ACK 9f88ded
naumenkogs:
utACK 9f88ded82b
jonatack:
ACK 9f88ded82b
Tree-SHA512: 1e93c0a5b68cb432524780ffc0093db893911fdfed9e2ed17f888e59114cc75d2a07062aefad4e5ce2e87c9270886117a8abb3c78fb889c9b9f31967f1777148
substitutes "for x in range(N):" by "for _ in range(N):"
indicates to the reader that a block is just repeated N times, and
that the loop counter is not used in the body
82fc4017b7 test: Catch decimal.InvalidOperation from TestNodeCLI#send_cli (Ben Woosley)
Pull request description:
`decimal.InvalidOperation` is a special case of a float parsing error, which
presumably should be handled in the same way as a general parsing error,
rather than blow up.
Alternatives include: logging the error, or re-raising with more information.
Example log output:
```
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 603, in sync_all
self.sync_blocks(nodes)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in sync_blocks
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in <listcomp>
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 571, in __call__
return self.cli.send_cli(self.command, *args, **kwargs)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 639, in send_cli
return json.loads(cli_stdout, parse_float=decimal.Decimal)
File "/usr/lib64/python3.6/json/__init__.py", line 367, in loads
return cls(**kw).decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 355, in raw_decode
obj, end = self.scan_once(s, idx)
decimal.InvalidOperation: [<class 'decimal.InvalidOperation'>]
```
See: https://travis-ci.org/github/bitcoin/bitcoin/jobs/713502326
ACKs for top commit:
laanwj:
ACK 82fc4017b7
Tree-SHA512: 8c102b8bf831b05c5ca4b2e1feb5574dcbaed8cab0b2f22b013c5dfcb81788a38839a163dd1e2c6470ccbe5874214663b84485f45467738fd850ca38d539ae25
31cf68a3ad [util] add RunCommandParseJSON (Sjors Provoost)
c17f54ee53 [ci] use boost::process (Sjors Provoost)
32128ba682 [doc] include Doxygen comments for HAVE_BOOST_PROCESS (Sjors Provoost)
3c84d85f7d [build] msvc: add boost::process (Sjors Provoost)
c47e4bbf0b [build] make boost-process opt-in (Sjors Provoost)
929cda5470 configure: add ax_boost_process (Sjors Provoost)
8314c23d7b [depends] boost: patch unused variable in boost_process (Sjors Provoost)
Pull request description:
Prerequisite for external signer support in #16546. Big picture overview in [this gist](https://gist.github.com/Sjors/29d06728c685e6182828c1ce9b74483d).
This adds a new dependency [boost process](https://github.com/boostorg/process/tree/boost-1.64.0). This is part of Boost since 1.64 which is part of `depends`. Because the minimum Boost version is 1.47, this functionality is skipped for older versions of Boost.
Use `./configure --with-boost-process` to opt in, which checks for the presence of Boost::Process.
We add `UniValue runCommandParseJSON(const std::string& strCommand)` to `system.{h,cpp}` which calls an arbitrary command and processes the JSON returned by it. This is currently only called by the test suite.
~For testing purposes this adds a new regtest-only RPC method `runcommand`, as well as `test/mocks/command.py` used by functional tests.~ (this is no longer the case)
TODO:
- [ ] review boost process in #15440
ACKs for top commit:
achow101:
ACK 31cf68a3ad
hebasto:
re-ACK 31cf68a3ad, only rebased (verified with `git range-diff`) and removed an unintentional tab character since the [previous](https://github.com/bitcoin/bitcoin/pull/15382#pullrequestreview-458371035) review.
meshcollider:
Very light utACK 31cf68a3ad, although I am not very confident with build stuff.
promag:
Code review ACK 31cf68a3ad, don't mind the nit.
ryanofsky:
Code review ACK 31cf68a3ad. I left some comments below that could be ignored or followed up later. The current change is clean and comprehensive.
Tree-SHA512: c506e747014b263606e1f538ed4624a8ad7bcf4e025cb700c12cc5739964e254dc04a2bbb848996b170e2ccec3fbfa4fe9e2b3976b191222cfb82fc3e6ab182d
72351784b3 lint: Remove travis env var from commit linter (Fabian Jahr)
Pull request description:
#19439 was recently merged and seemed to work fine but I now noticed strange behavior when it was running in Travis, which I could not reproduce locally. It turns out `TRAVIS_COMMIT_RANGE` which is used in Travis to get the commits for the linter, uses all the commits that were in a push, which includes all rebase commits for example. This means that the linter can fail on a commit that the developer has never even seen before, which can be very confusing. See an example here which caused me to look into this: https://travis-ci.org/github/bitcoin/bitcoin/jobs/714296381 The commit that is reported as failing in my PR is not part of my PR.
I think we rather want to use something like `git merge-base` to get the commit range by default and in Travis. I am leaving the env variable functionality in place with a different name but this is not a variable that can be expected to be present in the CI environments so the `merge-base` range should be used there by default.
ACKs for top commit:
hebasto:
ACK 72351784b3, I have reviewed the code and it looks OK, I agree it can be merged.
Tree-SHA512: afb27bb386855cb8d5cf84fd3a6c11ef1160b25af6175ed0aa146bf04b9a26eb77298df70df0a855f8c46f19f08b3f62c49872c12974fcfa5526a15ee05b3c10
faa9a74c9e test: Fail wait_until early if connection is lost (MarcoFalke)
Pull request description:
Calling `minonode.wait_until` needs a connection to make progress (e.g. waiting for an inv), unless the mininode waits for the initial connection or for a disconnection. So for test development and failure debugging, fail early in all `wait_until`, unless opted out.
ACKs for top commit:
jnewbery:
Code review ACK faa9a74c9e.
Tree-SHA512: 4be850b96e23b87bc2ff42c028a5045d6f5cdbc9482ce6a6ba01cc5eb26710dab9e2ed547c363aac4bd5825151ee9996fb797261420b631bceeddbfa698d1dec
3bd67ba5a4 Test addr response caching (Gleb Naumenko)
cf1569e074 Add addr permission flag enabling non-cached addr sharing (Gleb Naumenko)
acd6135b43 Cache responses to addr requests (Gleb Naumenko)
7cc0e8101f Remove useless 2500 limit on AddrMan queries (Gleb Naumenko)
ded742bc5b Move filtering banned addrs inside GetAddresses() (Gleb Naumenko)
Pull request description:
This is a very simple code change with a big p2p privacy benefit.
It’s currently trivial to scrape any reachable node’s AddrMan (a database of all nodes known to them along with the timestamps).
We do have a limit of one GETADDR per connection, but a spy can disconnect and reconnect even from the same IP, and send GETADDR again and again.
Since we respond with 1,000 random records at most, depending on the AddrMan size it takes probably up to 100 requests for an spy to make sure they scraped (almost) everything.
I even have a script for that. It is totally doable within couple minutes.
Then, with some extra protocol knowledge a spy can infer the direct peers of the victim, and other topological stuff.
I suggest to cache responses to GETADDR on a daily basis, so that an attacker gets at most 1,000 records per day, and can’t track the changes in real time. I will be following up with more improvements to addr relay privacy, but this one alone is a very effective. And simple!
I doubt any of the real software does *reconnect to get new addrs from a given peer*, so we shouldn’t be cutting anyone.
I also believe it doesn’t have any negative implications on the overall topology quality. And the records being “outdated” for at most a day doesn’t break any honest assumptions either.
ACKs for top commit:
jnewbery:
reACK 3bd67ba5a4
promag:
Code review ACK 3bd67ba5a4.
ariard:
Code Review ACK 3bd67ba
Tree-SHA512: dfa5d03205c2424e40a3f8a41af9306227e1ca18beead3b3dda44aa2a082175bb1c6d929dbc7ea8e48e01aed0d50f0d54491caa1147471a2b72a46c3ca06b66f
Introduced in ca10a03add then erroneously removed in
8d8099e97a. The restored line is how we are
checking that the node will still re-request a specific txid given a witness-related failure.
decimal.InvalidOperation is a special case of a float parsing error, which
presumably should be handled in the same way as a general parsing error,
rather than blow up.
Alternatives include: logging the error, or re-raising with more information.
Example log output:
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 603, in sync_all
self.sync_blocks(nodes)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in sync_blocks
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in <listcomp>
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 571, in __call__
return self.cli.send_cli(self.command, *args, **kwargs)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 639, in send_cli
return json.loads(cli_stdout, parse_float=decimal.Decimal)
File "/usr/lib64/python3.6/json/__init__.py", line 367, in loads
return cls(**kw).decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 355, in raw_decode
obj, end = self.scan_once(s, idx)
decimal.InvalidOperation: [<class 'decimal.InvalidOperation'>]
This is a more narrowly-construed wait which eliminates the possibility of the
wait being triggered by other messages.
Co-authored-by: Billy Garrison <billygarrison.btc@gmail.com>
284a969cc0 Linter to check commit message formatting (Amir Ghorbanian)
Pull request description:
Write linter to check that commit messages have a new line before the body or no body at all. fixes issue #19091.
ACKs for top commit:
troygiorshev:
ACK 284a969cc0 Reviewed, manually tested. Works great!
fjahr:
tested ACK 284a969cc0
adamjonas:
utACK 284a969cc0
Tree-SHA512: fa278f090780b54e4fa6e2967a62b4c1a4da55d112ec1ad6dd7e1181ac490c5c1af0165524b5781b463fdd6d0f79fd3d95b5160184e6eca432ccff1189f77390
78c312c983 Replace current benchmarking framework with nanobench (Martin Ankerl)
Pull request description:
Replace current benchmarking framework with nanobench
This replaces the current benchmarking framework with nanobench [1], an
MIT licensed single-header benchmarking library, of which I am the
autor. This has in my opinion several advantages, especially on Linux:
* fast: Running all benchmarks takes ~6 seconds instead of 4m13s on
an Intel i7-8700 CPU @ 3.20GHz.
* accurate: I ran e.g. the benchmark for SipHash_32b 10 times and
calculate standard deviation / mean = coefficient of variation:
* 0.57% CV for old benchmarking framework
* 0.20% CV for nanobench
So the benchmark results with nanobench seem to vary less than with
the old framework.
* It automatically determines runtime based on clock precision, no need
to specify number of evaluations.
* measure instructions, cycles, branches, instructions per cycle,
branch misses (only Linux, when performance counters are available)
* output in markdown table format.
* Warn about unstable environment (frequency scaling, turbo, ...)
* For better profiling, it is possible to set the environment variable
NANOBENCH_ENDLESS to force endless running of a particular benchmark
without the need to recompile. This makes it to e.g. run "perf top"
and look at hotspots.
Here is an example copy & pasted from the terminal output:
| ns/byte | byte/s | err% | ins/byte | cyc/byte | IPC | bra/byte | miss% | total | benchmark
|--------------------:|--------------------:|--------:|----------------:|----------------:|-------:|---------------:|--------:|----------:|:----------
| 2.52 | 396,529,415.94 | 0.6% | 25.42 | 8.02 | 3.169 | 0.06 | 0.0% | 0.03 | `bench/crypto_hash.cpp RIPEMD160`
| 1.87 | 535,161,444.83 | 0.3% | 21.36 | 5.95 | 3.589 | 0.06 | 0.0% | 0.02 | `bench/crypto_hash.cpp SHA1`
| 3.22 | 310,344,174.79 | 1.1% | 36.80 | 10.22 | 3.601 | 0.09 | 0.0% | 0.04 | `bench/crypto_hash.cpp SHA256`
| 2.01 | 496,375,796.23 | 0.0% | 18.72 | 6.43 | 2.911 | 0.01 | 1.0% | 0.00 | `bench/crypto_hash.cpp SHA256D64_1024`
| 7.23 | 138,263,519.35 | 0.1% | 82.66 | 23.11 | 3.577 | 1.63 | 0.1% | 0.00 | `bench/crypto_hash.cpp SHA256_32b`
| 3.04 | 328,780,166.40 | 0.3% | 35.82 | 9.69 | 3.696 | 0.03 | 0.0% | 0.03 | `bench/crypto_hash.cpp SHA512`
[1] https://github.com/martinus/nanobench
ACKs for top commit:
laanwj:
ACK 78c312c983
Tree-SHA512: 9e18770b18b6f95a7d0105a4a5497d31cf4eb5efe6574f4482f6f1b4c88d7e0946b9a4a1e9e8e6ecbf41a3f2d7571240677dcb45af29a6f0584e89b25f32e49e
82dee87933 test: test decodepsbt fee calculation (count input value only once per UTXO) (Sebastian Falbesoner)
Pull request description:
Fixes#19523, adding a simple test to `rpc_psbt.py` that checks that the decodepsbt fee matches the one given by the wallet (`walletcreatefundedpsbt`). This is in particular important for PSBTs with segwit inputs that have both a witness- and a non-witness-UTXO type set.
Example test run after reverting commit 75122780e2 ("Increment input value sum only once per UTXO in decodepsbt"):
```
$ test/functional/rpc_psbt.py
2020-07-26T11:31:44.862000Z TestFramework (INFO): Initializing test directory /tmp/bitcoin_func_test__sutcd4y
20.00007580
2020-07-26T11:31:47.073000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/honeybadger/buidl/bitcoin_thestack/test/functional/test_framework/test_framework.py", line 118, in main
self.run_test()
File "test/functional/rpc_psbt.py", line 166, in run_test
assert_equal(decoded['fee'], created_psbt['fee'])
File "/home/honeybadger/buidl/bitcoin_thestack/test/functional/test_framework/util.py", line 49, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(20.00007580 == 0.00007580)
2020-07-26T11:31:47.125000Z TestFramework (INFO): Stopping nodes
......
```
ACKs for top commit:
achow101:
ACK 82dee87933
Tree-SHA512: 296b8a701f851d482ef6200c6cbf0cf0257a79a828ac6dbc39b05d8c2d839c6fdb9d3f5a084015295cfa3eac7c11faa2f2d52e619c11627b04c75150eead8330
2c6a02e024 Clean message_count and last_message (Troy Giorshev)
Pull request description:
From #19580
This PR changes comments to clarify the intended usage of `message_count` and `last_message`. Additionally it changes the only usage of `message_count` to use `last_message` instead, bringing the code into alignment with the intended usage.
Note: Now `message_count` is completely unused. However, it is ready to be used (i.e. the supporting code works) and likely will be used in some test in the future.
ACKs for top commit:
jnewbery:
utACK 2c6a02e024
Tree-SHA512: 07c7684c9586de4f845e10d7aac36c1aab9fb56b409949c1c70d5ca705bc3971ca7d5943245a0472def4efd7b4e1c5dad2f713db5ead8fca08404daf4891e98b
74507ce71e walletdb: Remove BerkeleyBatch friend class from BerkeleyDatabase (Andrew Chow)
00f0041351 No need to check for duplicate fileids in all dbenvs (Andrew Chow)
d86efab370 walletdb: Move Db->open to BerkeleyDatabase::Open (Andrew Chow)
4fe4b3bf1b walletdb: track database file use as m_refcount within BerkeleyDatabase (Andrew Chow)
65fb8807ac Combine BerkeleyEnvironment::Verify into BerkeleyDatabase::Verify (Andrew Chow)
Pull request description:
`BerkeleyBatch` and `BerkeleyDatabase` are kind of messy. The goal of this is to clean up them up so that they are logically separated.
`BerkeleyBatch` currently handles the creation of the `BerkeleyDatabase`'s `Db` handle. This is instead moved into `BerkeleyDatabase` and is called by `BerkeleyBatch`.
Instead of having `BerkeleyEnvironment` track each database's usage, have `BerkeleyDatabase` track this usage itself with the `m_refcount` variable that is present in `WalletDatabase`.
Lastly, instead of having each `BerkeleyEnvironment` store the fileids of the databases open in it, have a global `g_fileids` to track those fileids. We were already checking fileid uniqueness globally (by checking the fileids in every environment when opening a database) so it's cleaner to do this with a global variable.
All of these changes allow us to make `BerkeleyBatch` and `BerkeleyDatabase` no longer be friend classes.
The diff of this PR is currently the same as in ##18971
Requires #19334
ACKs for top commit:
laanwj:
Code review ACK 74507ce71e
ryanofsky:
Code review ACK 74507ce71e. No changes since last review other than rebase
Tree-SHA512: 845d84ee1a470e2bf5d2e2e3d7738183d8ce43ddd06a0bbd57edecf5779b2f55d70728b1b57f5daab0f078650a8d60c3e19dc30b75b36e7aa952ce268399d5f6
This commit clarifies the intended usage of message_count and
last_message. Additionally it changes the only usage of message_count
to using last_message instead, bringing the code further along the
intended usage.
Checks that the RPC decodepsbt calculates the fee correctly, in particular for
PSBTs with segwit inputs that have both a witness- and a non-witness-UTXO type
set. Before commit 75122780e2 ("Increment input
value sum only once per UTXO in decodepsbt") the values for those inputs were
double counted.
9c69cfe4c5 Add <datadir>/settings.json persistent settings storage. (Russell Yanofsky)
eb682c5700 util: Add ReadSettings and WriteSettings functions (Russell Yanofsky)
Pull request description:
Persistent settings are used in followup PRs #15936 to unify gui settings between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to the loadwallet RPC and maintain a dynamic list of wallets that should be loaded on startup that also can be shared between bitcoind and bitcoin-qt.
ACKs for top commit:
MarcoFalke:
Approach re-ACK 9c69cfe4c5🌾
jnewbery:
utACK 9c69cfe4c5
Tree-SHA512: 39fcc6051717117c9141e934de1d0d3f739484be4685cdf97d54de967c8c816502b4fd0de12114433beaa5c5b7060c810fd8ae4e2b3ce7c371eb729ac01ba2e1
2aac093a3d test: Add test coverage for -networkactive option (Hennadii Stepanov)
3c58129b12 net: Log network activity status change unconditionally (Hennadii Stepanov)
62fe6aa87e net: Add -networkactive option (Hennadii Stepanov)
Pull request description:
Some Bitcoin Core activity is completely local (offline), e.g., reindexing.
The `setnetworkactive` RPC command is already present. This PR adds the corresponding command-line argument / config option, and allows to start the client with disabled p2p network by providing `-networkactive=0` or `-nonetworkactive`.
This was done while reviewing #16981.
ACKs for top commit:
MarcoFalke:
re-ACK 2aac093a3d🏠
LarryRuane:
ACK 2aac093a3d
Tree-SHA512: 446d791b46d7b556d7694df7b1f88cd4fbc09301fe4eaf036b45cb8166ed806156353cc03788a07b633d5887d5eee30a7c02a2d4307141c8ccc75e0a88145636
0a4f1422cd Further improve comments around recentRejects (Suhas Daftuar)
0e20cfedb7 Disconnect peers sending wtxidrelay message after VERACK (Suhas Daftuar)
cacd85209e test: Use wtxid relay generally in functional tests (Fabian Jahr)
8d8099e97a test: Add tests for wtxid tx relay in segwit test (Fabian Jahr)
9a5392fdf6 test: Update test framework p2p protocol version to 70016 (Fabian Jahr)
dd78d1d641 Rename AddInventoryKnown() to AddKnownTx() (Suhas Daftuar)
4eb515574e Make TX_WITNESS_STRIPPED its own rejection reason (Suhas Daftuar)
97141ca442 Delay getdata requests from peers using txid-based relay (Suhas Daftuar)
46d78d47de Add p2p message "wtxidrelay" (Suhas Daftuar)
2d282e0cba ignore non-wtxidrelay compliant invs (Anthony Towns)
ac88e2eb61 Add support for tx-relay via wtxid (Suhas Daftuar)
8e68fc246d Add wtxids to recentRejects instead of txids (Suhas Daftuar)
144c385820 Add wtxids of confirmed transactions to bloom filter (Suhas Daftuar)
85c78d54af Add wtxid-index to orphan map (Suhas Daftuar)
08b39955ec Add a wtxid-index to mapRelay (Suhas Daftuar)
60f0acda71 Just pass a hash to AddInventoryKnown (Suhas Daftuar)
c7eb6b4f1f Add wtxid to mempool unbroadcast tracking (Amiti Uttarwar)
2b4b90aa8f Add a wtxid-index to the mempool (Suhas Daftuar)
Pull request description:
Using txids (a transaction's hash, without witness) for transaction relay is problematic, post-segwit -- if a peer gives us a segwit transaction that fails policy checks, it could be because the txid associated with the transaction is definitely unacceptable to our node (regardless of the witness), or it could be that the transaction was malleated and with a different witness, the txid could be accepted to our mempool.
We have a bloom filter of recently rejected transactions, whose purpose is to help us avoid redownloading and revalidating transactions that fail to be accepted, but because of this potential for witness malleability to interfere with relay of valid transactions, we do not use the filter for segwit transactions. This issue is discussed at some length in #8279. The effect of this is that whenever a segwit transaction that fails policy checks is relayed, a node would download that transaction from every peer announcing it, because it has no way presently to cache failure. Historically this hasn't been a big problem, but if/when policy for accepting segwit transactions were to change (eg taproot, or any other change), we could expect older nodes talking to newer nodes to be wasting bandwidth because of this.
As discussed in that issue, switching to wtxid-based relay solves this problem -- by using an identifier for a transaction that commits to all the data in our relay protocol, we can be certain if a transaction that a peer is announcing is one that we've already tried to process, or if it's something new. This PR introduces support for wtxid-based relay with peers that support it (and remains backwards compatible with peers that use txids for relay, of course).
Apart from code correctness, one issue to be aware of is that by downloading from old and new peers alike, we should expect there to be some bandwidth wasted, because sometimes we might download the same transaction via txid-relay as well as wtxid-relay. The last commit in this PR implements a heuristic I want to analyze, which is to just delay relay from txid-relay peers by 2 seconds, if we have at least 1 wtxid-based peer. I've just started running a couple nodes with this heuristic so I can measure how well it works, but I'm open to other ideas for minimizing that issue. In the long run, I think this will be essentially a non-issue, so I don't think it's too big a concern, we just need to bite the bullet and deal with it during upgrade.
Finally, this proposal would need a simple BIP describing the changes, which I haven't yet drafted. However, review and testing of this code in the interim would be welcome.
To do items:
- [x] Write BIP explaining the spec here (1 new p2p message for negotiating wtxid-based relay, along with a new INV type)
- [ ] Measure and evaluate a heuristic for minimizing how often a node downloads the same transaction twice, when connected to old and new nodes.
ACKs for top commit:
naumenkogs:
utACK 0a4f1422cd
laanwj:
utACK 0a4f1422cd
Tree-SHA512: d8eb8f0688cf0cbe9507bf738e143edab1f595551fdfeddc2b6734686ea26e7f156b6bfde38bad8bbbe8bec1857c7223e1687f8f018de7463dde8ecaa8f450df
12410b1feb test: fix intermittent p2p_ibd_txrelay race, add test_framework.py#wait_until (Jon Atack)
Pull request description:
To fix these intermittent failures in Travis CI.
```
162/163 - p2p_ibd_txrelay.py failed, Duration: 2 s
stdout:
2020-07-19T05:44:17.213000Z TestFramework (INFO):
Check that nodes set minfilter to MAX_MONEY while still in IBD
2020-07-19T05:44:17.216000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/test_framework/test_framework.py", line 117, in main
self.run_test()
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/p2p_ibd_txrelay.py", line 30, in run_test
assert_equal(conn_info['minfeefilter'], MAX_FEE_FILTER)
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/test_framework/util.py", line 49, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(0E-8 == 0.09170997)
2020-07-19T05:44:17.293000Z TestFramework (INFO): Stopping nodes
```
At Marco's suggestion, cherry-picked part of #19134 to nicely simplify using `wait_until`.
ACKs for top commit:
vasild:
ACK 12410b1fe
Tree-SHA512: 615f509883682fd693e578b259cba35a9fa0bc519f1394e88c857e8b0650bfec5397bfa856cfa9e6d5ef81d0ee6ad02e4ad2b0eb0bd530b4c281cbe3e663790b
Using both txid and wtxid-based relay with peers means that we could sometimes
download the same transaction twice, if announced via two different hashes from
different peers.
Use a heuristic of delaying txid-peer-getdata requests by 2 seconds, if we have
at least one wtxid-based peer.
This adds a field to CNodeState that tracks whether to relay transactions with
that peer via wtxid, instead of txid. As of this commit the field will always
be false, but in a later commit we will add a way to negotiate turning this on
via p2p messages exchanged with the peer.
0cdf2a77dd ci: add tsan debug symbols option (Russell Yanofsky)
9a2f12680b ci: Add tsan suppression for race in DatabaseBatch (Hennadii Stepanov)
Pull request description:
Since #19325 was merged, the corresponding change in TSan suppression file gets required.
This PR is:
- an analogous to #19226 and #19450, and
- a temporary workaround for CI fail like https://cirrus-ci.com/task/5741795508224000?command=ci#L4993
ACKs for top commit:
MarcoFalke:
ACK 0cdf2a77dd
Tree-SHA512: 7832f143887c8a0df99dea03e00694621710378fbe923e3592185fcd3658546a590693b513abffc5ab96e9ef76c9c4bff3330eeee69a0c5dbe7574f34c417220
cb31ee01b4 [test] feefilter during and after IBD (gzhao408)
Pull request description:
This is a followup to #19204 which uses `minfeefilter=MAX_MONEY` to effectively shut off txrelay, thereby reducing inv traffic, when nodes are in IBD. It was [missing](https://github.com/bitcoin/bitcoin/pull/19204#issuecomment-644040070) a functional test.
ACKs for top commit:
jnewbery:
utACK cb31ee01b4
Tree-SHA512: a9effc8193fa95fb42a2f9c66b258cc7b0941fc04c1ce3a6092f4426c9bfc7e72f702aca559b3e30e90652497f411f22fae3cf5cdb6cfd6ef6d37fed712cda67
e80259f197 Additionally treat Tx.nVersion as unsigned in joinpsbts (Matt Corallo)
970de70bdd Dump transaction version as an unsigned integer in RPC/TxToUniv (Matt Corallo)
Pull request description:
Consensus-wise we already treat it as an unsigned integer (the
only rules around it are in CSV/locktime handling), but changing
the underlying data type means touching consensus code for a
simple cleanup change, which isn't really worth it.
See-also, https://github.com/rust-bitcoin/rust-bitcoin/pull/299
ACKs for top commit:
sipa:
ACK e80259f197
practicalswift:
ACK e80259f197
ajtowns:
ACK e80259f197 code review -- checked all other uses of tx.nVersion treat it as unsigned (except for policy.cpp:IsStandard anyway), so looks good.
naumenkogs:
ACK e80259f
Tree-SHA512: 6760a2c77e24e9e1f79a336ca925f9bbca3a827ce02003c71d7f214b82ed3dea13fa7d9f87df9b9445cd58dff8b44a15571d821c876f22f8e5a372a014c9976b