* Update tx output in `p2p-fullblocktest.py` to match Dogecoin coin reward.
* Disable the re-org test as it disconnects the mini-node before the re-org completes.
* Enable full block tests
* Fix invalidblocktest
* Move watch only address funding to immediately before it's used, so node 0 doesn't spend the output before it checks it later.
* Fix `fundrawtransaction` tests and sanitize fee calculation at the same time
* Correct resolution of chain parameters when validating tx inputs, especially from previous coinbase transactions
* Set block versions on full block tests so that the generated blocks are AuxPoW compatible
* Make most of the RPC tests pass
* Add AUXPoW rpc tests
- Tests the auxpow rpc interface `getauxblock`
- Tests consensus constraints for auxpow:
- Minimum block height
- Valid scrypt proof of work
- Foreign chain ID
Changes are as below:
Wrap CBlockHeader::nVersion into a new class (CBlockVersion). This allows to take care of interpreting the field into a base version, auxpow flag and the chain ID.
Update getauxblock.py for new 'generate' RPC call.
Add 'auxpow' to block JSON.
Accept auxpow as PoW verification.
Add unit tests for auxpow verification.
Add check for memory-layout of CBlockVersion.
Weaken auxpow chain ID checks for the testnet.
Allow Params() to overrule when to check the auxpow chain ID and for legacy blocks. Use this to disable the checks on testnet.
Introduce CPureBlockHeader.
Split the block header part that is used by auxpow and the "real" block header (that uses auxpow) to resolve the cyclic dependency between the two.
Differentiate between uint256 and arith_uint256.
This change was done upstream, modify the auxpow code.
Add missing lock in auxpow_tests.
Fix REST header check for auxpow headers.
Those can be longer, thus take that into account. Also perform the check actually on an auxpow header.
Correctly set the coinbase for getauxblock results.
Call IncrementExtraNonce in getauxblock so that the coinbase is actually initialised with the stuff it should be. (BIP30 block height and COINBASE_FLAGS.)
Implement getauxblock plus regression test.
Turn auxpow test into FIXTURE test.
This allows using of the Params() calls.
Move CMerkleTx code to auxpow.cpp.
Otherwise we get linker errors when building without wallet.
Fix rebase with BIP66.
Update the code to handle BIP66's nVersion=3.
Enforce that auxpow parent blocks have no auxpow block version.
This is for compatibility with namecoind. See also https://github.com/namecoin/namecoin/pull/199.
Move auxpow-related parameters to Consensus::Params.
The fundrawtransaction() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when funding the transaction
failed). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
That error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
Github-Pull: #9853
Rebased-From: dab804c18a
The setban() RPC was returning misleading or incorrect error
codes (for example RPC_CLIENT_NODE_ALREADY_ADDED when an invalid IP
address was entered). This commit fixes those error codes:
- RPC_CLIENT_INVALID_IP_OR_SUBNET should be returned if the client
enters an invalid IP address or subnet.
This commit also updates the test cases to explicitly test the error code.
This commit also adds a testcase for trying to setban on an invalid subnet.
Github-Pull: #9853
Rebased-From: a012087667
The removeprunedfunds() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when the transaction was
not found in the wallet). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
This error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
Github-Pull: #9853
Rebased-From: 960bc7f778
RPCs in blockchain.cpp were returning misleading or incorrect error
codes (for example getblock() returning RPC_INTERNAL_ERROR when the
block had been pruned). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
- RPC_METHOD_NOT_FOUND should not be returned in response to a
JSON request for an existing method.
Those error codes have been replaced with RPC_MISC_ERROR or
RPC_INVALID_PARAMETER as appropriate.
Github-Pull: #9853
Rebased-From: c1190963b3
The bumpfee() RPC was returning misleading or incorrect error codes
(for example RPC_INVALID_ADDRESS_OR_KEY when the transaction was not
BIP125 replacable). This commit fixes those error codes:
- RPC_INVALID_ADDRESS_OR_KEY if an invalid address was provided:
- Invalid change address given
- RPC_INVALID_PARAMETER if a single (non-address/key) parameter is incorrect
- confTarget and totalFee options should not both be set.
- Invalid confTarget
- Insufficient totalFee (cannot be less than required fee)
- RPC_WALLET_ERROR for any other error
- Transaction has descendants in the wallet
- Transaction has descendants in the mempool
- Transaction has been mined, or is conflicted with a mined transaction
- Transaction is not BIP 125 replaceable
- Transaction has already been bumped
- Transaction contains inputs that don't belong to the wallet
- Transaction has multiple change outputs
- Transaction does not have a change output
- Fee is higher than maxTxFee
- New fee rate is less than the minimum fee rate
- Change output is too small.
This commit also updates the test cases to explicitly test the error code.
Github-Pull: #9853
Rebased-From: 6d07c62322
Segwit's version bit will be signalled for all invocations of CreateNewBlock,
and not specifying segwit only will cause CreateNewBlock to skip transactions
with witness from being selected.
Github-Pull: #9955
Rebased-From: abe7b3d3ab
Send payments during the test from a different node than the node generating
keys to be imported, so the spending node doesn't create transactions that
inadvertently involve (spend funds from) the imported keys.
Fixes#9826
Github-Pull: #9839
Rebased-From: 864890adf5
Get rid of partial functions so the test can be more easily extended to add
more variants of imports with options that affect rescanning (e.g. different
key timestamps).
Also change the second half of the test to send /to/ the imported addresses,
instead of /from/ the imported addresses. The goal of this part of the test was
to confirm that the wallet would pick up new transactions after an import
regardless of whether or not a rescan happened during the import. But because
the wallet can only do this reliably for incoming transactions and not outgoing
transactions (which require the wallet to look up transaction inputs) the test
previously was less meaningful than it should have been.
Fixes a bug in AcceptBlock() in invoking CheckBlock() with incorrect
arguments, and restores a call to CheckBlock() from ProcessNewBlock()
as belt-and-suspenders.
Updates the (overspecified) tests to match behavior.
d943491 qa: add a test to detect leaky p2p messages (Cory Fields)
8650bbb qa: Expose on-connection to mininode listeners (Matt Corallo)
5b5e4f8 qa: mininode learns when a socket connects, not its first action (Matt Corallo)
cbfc5a6 net: require a verack before responding to anything else (Cory Fields)
8502e7a net: parse reject earlier (Cory Fields)
c45b9fb net: correctly ban before the handshake is complete (Cory Fields)
66f861a Add a test for P2P inactivity timeouts (Matt Corallo)
b436f92 qa: Expose on-connection to mininode listeners (Matt Corallo)
8aaba7a qa: mininode learns when a socket connects, not its first action (Matt Corallo)
2cbd119 Disconnect peers which we do not receive VERACKs from within 60 sec (Matt Corallo)
266a811 Use MTP for importmulti "now" timestamps (Russell Yanofsky)
3cf9917 Add test to check new importmulti "now" value (Russell Yanofsky)
442887f Require timestamps for importmulti keys (Russell Yanofsky)
This is certainly not exhaustive, but it's better than nothing. Adds checks
for:
- Any message received before sending a version
- Any message received other than version/reject before sending a verack
It also tries to goad the remote into sending a pong, address, or block
announcement.
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
