AddPeerDialog
Add Peer
Enter the peer details below.
Be careful! Do not blindly trust anyone that tells you to add their node.
Enter the peer's address
Enter the peer's port
Add!
Please enter an address.
Please enter a valid peer address.
AddressBookPage
Right-click to edit address or label
Create a new address
Create a new address
&New
Copy the currently selected address to the system clipboard
Copy the currently selected address to the system clipboard
&Copy
C&lose
Delete the currently selected address from the list
Delete the currently selected address from the list
Export the data in the current tab to a file
Export the data in the current tab to a file
&Export
&Export
&Delete
&Delete
Choose the address to send coins to
Choose the address to receive coins with
C&hoose
Such sending addresses
Much receiving addresses
These are your Dogecoin addresses for sending payments. Always check the amount and the receiving address before sending coins.
These are your Dogecoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.
&Copy Address
Copy &Label
&Edit
Export Address List
Comma separated file (*.csv)
Exporting Failed
There was an error trying to save the address list to %1. Please try again.
AddressTableModel
Label
Address
(no label)
AskPassphraseDialog
Passphrase Dialog
Passphrase Dialog
Enter passphrase
Enter passphrase
New passphrase
New passphrase
Repeat new passphrase
Repeat new passphrase
Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>.
Encrypt wallet
This operation needs your wallet passphrase to unlock the wallet.
Unlock wallet
This operation needs your wallet passphrase to decrypt the wallet.
Decrypt wallet
Change passphrase
Enter the old passphrase and new passphrase to the wallet.
Confirm wallet encryption
Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR DOGECOINS</b>!
Are you sure you wish to encrypt your wallet?
Wallet encrypted
%1 will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your dogecoins from being stolen by malware infecting your computer.
IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.
Wallet encryption failed
Wallet encryption failed due to an internal error. Your wallet was not encrypted.
The supplied passphrases do not match.
Wallet unlock failed
The passphrase entered for the wallet decryption was incorrect.
Wallet decryption failed
Wallet passphrase was successfully changed.
Warning: The Caps Lock key is on!
BanTableModel
IP/Netmask
Banned Until
BitcoinGUI
Wallet
Wallet
Node
&Wow
&Wow
Show general overview of wallet
Show general overview of wallet
&Such Send
&Such Send
Send coins to a Dogecoin address
Send coins to a Dogecoin address
&Much Receive
&Much Receive
Request payments (generates QR codes and dogecoin: URIs)
&Transactions
&Transactions
Browse transaction history
Browse transaction history
E&xit
E&xit
Quit application
Quit application
&About %1
Show information about %1
About &Qt
About &Qt
Show information about Qt
Show information about Qt
&Options...
&Options...
Modify configuration options for %1
&Show / Hide
&Show / Hide
Show or hide the main Window
Show or hide the main Window
&Encrypt Wallet...
&Encrypt Wallet...
Encrypt the private keys that belong to your wallet
Encrypt the private keys that belong to your wallet
&Backup Wallet...
&Backup Wallet...
Backup wallet to another location
&Change Passphrase...
&Change Passphrase...
Change the passphrase used for wallet encryption
Change the passphrase used for wallet encryption
Sign &message...
Sign &message...
Sign messages with your Dogecoin addresses to prove you own them
Sign messages with your Dogecoin addresses to prove you own them
&Verify message...
Verify messages to ensure they were signed with specified Dogecoin addresses
Verify messages to ensure they were signed with specified Dogecoin addresses
&Print paper wallets
Print paper wallets
&Debug window
&Debug window
Open debugging and diagnostic console
Open debugging and diagnostic console
&Such sending addresses...
Show the list of used sending addresses and labels
&Much receiving addresses...
Show the list of used receiving addresses and labels
Open &URI...
Open a dogecoin: URI or payment request
&Import Private Key...
Import a Dogecoin private key
&Command-line options
Show the %1 help message to get a list with possible Dogecoin command-line options
&File
&File
&Settings
&Settings
&Help
&Help
Tabs toolbar
Tabs toolbar
%1 client
%n active connection(s) to Dogecoin network
%n active connection to Dogecoin network
%n active connections to Dogecoin network
Click to disable network activity.
Network activity disabled.
Click to enable network activity again.
Syncing Headers (%1%)...
Synchronizing with network...
Synchronizing with network...
Indexing blocks on disk...
Processing blocks on disk...
Reindexing blocks on disk...
Reindexing blocks on disk...
Connecting to peers...
Processed %n block(s) of transaction history.
Processed %n block of transaction history.
Processed %n blocks of transaction history.
Up to date
Up to date
%1 behind
%1 behind
Catching up...
Catching up...
Last received block was generated %1 ago.
Last received block was generated %1 ago.
Transactions after this will not yet be visible.
Transactions after this will not yet be visible.
Dogecoin
Dogecoin
Error
Error
Warning
Warning
Information
Information
Date: %1
Amount: %1
Type: %1
Label: %1
Address: %1
Sent transaction
Sent transaction
Incoming transaction
Incoming transaction
HD key generation is <b>enabled</b>
HD key generation is <b>disabled</b>
Wallet is <b>encrypted</b> and currently <b>unlocked</b>
Wallet is <b>encrypted</b> and currently <b>unlocked</b>
Wallet is <b>encrypted</b> and currently <b>locked</b>
Wallet is <b>encrypted</b> and currently <b>locked</b>
Runaway exception
A fatal error occurred. Dogecoin can no longer continue safely and will quit.
ClientModel
Network Alert
CoinControlDialog
Coin Selection
Quantity:
Bytes:
Amount:
Fee:
Dust:
After Fee:
Change:
(un)select all
Tree mode
List mode
Amount
Amount
Received with label
Received with address
Date
Date
Confirmations
Confirmed
Confirmed
Copy address
Copy label
Copy amount
Copy transaction ID
Lock unspent
Unlock unspent
Copy quantity
Copy fee
Copy after fee
Copy bytes
Copy dust
Copy change
(%1 locked)
yes
no
This label turns red if any recipient receives an amount smaller than the current dust threshold.
Can vary +/- %1 koinu(s) per input.
(no label)
change from %1 (%2)
(change)
EditAddressDialog
Edit Address
Edit Address
&Label
&Label
The label associated with this address list entry
The address associated with this address list entry. This can only be modified for sending addresses.
&Address
&Address
New receiving address
New sending address
Edit receiving address
Edit sending address
The entered address "%1" is not a valid Dogecoin address.
The entered address "%1" is already in the address book.
Could not unlock wallet.
New key generation failed.
FreespaceChecker
A new data directory will be created.
A new data directory will be created.
name
name
Directory already exists. Add %1 if you intend to create a new directory here.
Directory already exists. Add %1 if you intend to create a new directory here.
Path already exists, and is not a directory.
Path already exists, and is not a directory.
Cannot create data directory here.
Cannot create data directory here.
HelpMessageDialog
version
version
(%1-bit)
About %1
Command-line options
Usage:
Usage:
command-line options
command-line options
UI Options:
Choose data directory on startup (default: %u)
Set language, for example "de_DE" (default: system locale)
Start minimized
Set SSL root certificates for payment request (default: -system-)
Show splash screen on startup (default: %u)
Reset all settings changed in the GUI
ImportKeysDialog
Import Private Key
&Import Private Key
Private Key:
Private key to import into your wallet
Label for this private key in your wallet
Label (optional):
Rescan
Reset all key management options to default.
&Reset
&Import
&Cancel
&Cancel
Invalid private key; please check and try again!
Invalid address generated from private key; please check and try again!
Failed to add private key.
Rescanning...
Rescanning...
Intro
Welcome
Welcome
Welcome to %1.
As this is the first time the program is launched, you can choose where %1 will store its data.
%1 will download and store a copy of the Dogecoin block chain. At least %2GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.
Use the default data directory
Use the default data directory
Use a custom data directory:
Use a custom data directory:
Error: Specified data directory "%1" cannot be created.
Error
Error
%n GB of free space available
%n GB of free space available
%n GB of free space available
(of %n GB needed)
(of %n GB needed)
(of %n GB needed)
Choose data directory
ModalOverlay
Form
Form
Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the dogecoin network, as detailed below.
Attempting to spend dogecoins that are affected by not-yet-displayed transactions will not be accepted by the network.
Number of blocks left
Unknown...
Last block time
Last block time
Progress
Progress increase per hour
calculating...
Estimated time left until synced
Hide
Unknown. Syncing Headers (%1)...
OpenURIDialog
Open URI
Open payment request from URI or file
URI:
Select payment request file
Select payment request file to open
OptionsDialog
Options
Options
&Main
&Main
Automatically start %1 after logging in to the system.
&Start %1 on system login
Size of &database cache
MB
Number of script &verification threads
Accept connections from outside
Allow incoming connections
IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)
Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.
Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.
Third party transaction URLs
Active command-line options that override above options:
Reset all client options to default.
Reset all client options to default.
&Reset Options
&Reset Options
&Network
&Network
(0 = auto, <0 = leave that many cores free)
W&allet
Expert
Enable coin &control features
If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.
&Spend unconfirmed change
Automatically open the Dogecoin client port on the router. This only works when your router supports UPnP and it is enabled.
Map port using &UPnP
Map port using &UPnP
Connect to the Dogecoin network through a SOCKS5 proxy.
&Connect through SOCKS5 proxy (default proxy):
Proxy &IP:
Proxy &IP:
&Port:
&Port:
Port of the proxy (e.g. 9050)
Port of the proxy (e.g. 9050)
Used for reaching peers via:
Shows, if the supplied default SOCKS5 proxy is used to reach peers via this network type.
IPv4
IPv6
Tor
Connect to the Dogecoin network through a separate SOCKS5 proxy for Tor hidden services.
Use separate SOCKS5 proxy to reach peers via Tor hidden services:
&Window
&Window
&Hide the icon from the system tray.
Hide tray icon
Show only a tray icon after minimizing the window.
Show only a tray icon after minimizing the window.
&Minimize to the tray instead of the taskbar
&Minimize to the tray instead of the taskbar
M&inimize on close
M&inimize on close
&Display
&Display
User Interface &language:
User Interface &language:
The user interface language can be set here. This setting will take effect after restarting %1.
&Unit to show amounts in:
&Unit to show amounts in:
Choose the default subdivision unit to show in the interface and when sending coins.
Choose the default subdivision unit to show in the interface and when sending coins.
Whether to show coin control features or not.
&OK
&OK
&Cancel
&Cancel
default
default
none
Confirm options reset
Confirm options reset
Client restart required to activate changes.
Client will be shut down. Do you want to proceed?
This change would require a client restart.
The supplied proxy address is invalid.
The supplied proxy address is invalid.
OverviewPage
Form
Form
The displayed information may be out of date. Your wallet automatically synchronizes with the Dogecoin network after a connection is established, but this process has not completed yet.
Watch-only:
Available:
Your current spendable balance
Your current spendable balance
Pending:
Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance
Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance
Immature:
Immature:
Mined balance that has not yet matured
Mined balance that has not yet matured
Balances
Total:
Total:
Your current total balance
Your current total balance
Your current balance in watch-only addresses
Spendable:
Recent transactions
Helpful tip of the day:
Tip
Unconfirmed transactions to watch-only addresses
Mined balance in watch-only addresses that has not yet matured
Current total balance in watch-only addresses
Never share your wallet.dat file/your private key with anyone
For more advanced settings use the console in 'Help' -> 'Debug Window'
Encrypt your wallet with a strong passphrase for maximum security
Make sure to keep your wallet updated.
Backup your private key to recover your coins, using 'File' > 'Backup Wallet'
Always do your own research before using an external cryptocurrency service
Never share your private key to an untrustworthy person.
Who own the private keys own the coins.
To see ongoing development and contribute, checkout Dogecoin repository on GitHub!
Services that claim to double your dogecoins are always ponzi schemes
PaperWalletDialog
Print Your Paper Wallets
Very New Address
So Print
Many Wallets?
1
2
3
4
5
6
7
8
9
10
11
12
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>
Public Key:
Close
It is recommended to disconnect from the internet before printing paper wallets. Even though paper wallets are generated on your local computer, it is still possible to unknowingly have malware that transmits your screen to a remote location. It is also recommended to print to a local printer vs a network printer since that network traffic can be monitored. Some advanced printers also store copies of each printed document. Proceed with caution relative to the amount of value you plan to store on each address.
Warning: Network Activity Detected
Error encoding Address into QR Code.
Error encoding private key into QR Code.
failed to open file, is it writable?
Printing Error
Load Paper Wallets
The paper wallet printing process has begun.<br/>Please wait for the wallets to print completely and verify that everything printed correctly.<br/>Check for misalignments, ink bleeding, smears, or anything else that could make the private keys unreadable.<br/>Now, enter the number of DOGE you wish to send to each wallet:
Paper wallet %1
<b>%1</b> to Paper Wallet <span style='font-family: monospace;'>%2</span>
Send Coins
Send Coins
The recipient address is not valid, please recheck.
The amount to pay must be larger than 0
The amount exceeds your balance.
The total exceeds your balance when the transaction fee is included
Duplicate address found, can only send to each address once per send operation.
Transaction creation failed!
Are you sure you want to send?
added as transaction fee
Total Amount %1 (= %2)
or
Confirm send coins
The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
PaymentServer
Payment request error
Cannot start dogecoin: click-to-pay handler
URI handling
Payment request fetch URL is invalid: %1
Invalid payment address %1
URI cannot be parsed! This can be caused by an invalid Dogecoin address or malformed URI parameters.
Payment request file handling
Payment request file cannot be read! This can be caused by an invalid payment request file.
Payment request rejected
Payment request network doesn't match client network.
Payment request expired.
Payment request is not initialized.
Unverified payment requests to custom payment scripts are unsupported.
Invalid payment request.
Requested payment amount of %1 is too small (below discard threshold).
Refund from %1
Payment request %1 is too large (%2 bytes, allowed %3 bytes).
Error communicating with %1: %2
Payment request cannot be parsed!
Bad response from server %1
Network request error
Payment acknowledged
PeerTableModel
User Agent
Node/Service
NodeId
Ping
Bytes Sent
Bytes Received
PeerTools
Error: Peer-to-peer functionality missing or disabled
Attempted to one try node.
Error: Node already added
Node not found in connected nodes
Disconnected the node:
Returned OK.
QObject
Amount
Amount
Enter a Dogecoin address (e.g. %1)
%1 d
%1 h
%1 m
%1 s
None
N/A
N/A
%1 ms
%1 B
%1 TB
%1 GB
%1 MB
%1 KB
%n second(s)
%n second
%n seconds
%n minute(s)
%n minute
%n minutes
%n hour(s)
%n hour
%n hours
%n day(s)
%n day
%n days
%n week(s)
%n week
%n weeks
%1 and %2
%n year(s)
%n year
%n years
%1 didn't yet exit safely...
QObject::QObject
Error: Specified data directory "%1" does not exist.
Error: Cannot parse configuration file: %1. Only use key=value syntax.
Error: %1
QRImageWidget
&Save Image...
&Copy Image
Save QR Code
PNG Image (*.png)
RPCConsole
N/A
N/A
Client version
Client version
&Information
&Information
Debug window
General
Using BerkeleyDB version
Datadir
Startup time
Startup time
Network
Network
Name
Number of connections
Number of connections
Block chain
Block chain
Current number of blocks
Current number of blocks
Memory Pool
Current number of transactions
Memory usage
Received
Sent
&Peers
Connected peers
Add new peer
Remove peer
One try peer
Banned peers
Select a peer to view detailed information.
Whitelisted
Direction
Version
Starting Block
Synced Headers
Synced Blocks
User Agent
Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.
Decrease font size
Increase font size
Services
Ban Score
Connection Time
Last Send
Last Receive
Ping Time
The duration of a currently outstanding ping.
Ping Wait
Min Ping
Time Offset
Last block time
Last block time
&Open
&Open
&Console
&Console
&Network Traffic
&Clear
Totals
In:
Out:
Debug log file
Debug log file
Clear console
Clear console
1 &hour
1 &day
1 &week
1 &year
&Disconnect
Ban for
&Unban
Welcome to the %1 RPC console.
Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.
Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.
Type <b>help</b> for an overview of available commands.
Type <b>help</b> for an overview of available commands.
WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramification of a command.
Network activity disabled
Error
Error
Remove Peer
Are you sure you want to remove the peer:
No peer was selected.
%1 B
%1 KB
%1 MB
%1 GB
(node id: %1)
via %1
never
Inbound
Outbound
Yes
No
Unknown
ReceiveCoinsDialog
&Amount:
&Label:
&Label:
&Message:
Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.
R&euse an existing receiving address (not recommended)
An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Dogecoin network.
An optional label to associate with the new receiving address.
Use this form to request payments. All fields are <b>optional</b>.
An optional amount to request. Leave this empty or zero to not request a specific amount.
Clear all fields of the form.
Clear
Requested payments history
&Request payment
Show the selected request (does the same as double clicking an entry)
Show
Remove the selected entries from the list
Remove
Copy URI
Copy label
Copy message
Copy amount
ReceiveRequestDialog
QR Code
Copy &URI
Copy &Address
&Save Image...
Request payment to %1
Payment information
URI
Address
Amount
Amount
Label
Message
Resulting URI too long, try to reduce the text for label / message.
Error encoding URI into QR Code.
RecentRequestsTableModel
Date
Date
Label
Message
(no label)
(no message)
(no amount requested)
Requested
SendCoinsDialog
Send Coins
Send Coins
Coin Control Features
Inputs...
automatically selected
Insufficient funds!
Quantity:
Bytes:
Amount:
Fee:
After Fee:
Change:
If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.
Custom change address
Transaction Fee:
Choose...
Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until your have validated the complete chain.
Warning: Fee estimation is currently not possible.
collapse fee-settings
If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.
per kilobyte
Hide
total at least
(read the tooltip)
Recommended:
Custom:
Send to multiple recipients at once
Send to multiple recipients at once
Add &Recipient
Add &Recipient
Clear all fields of the form.
Dust:
Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for dogecoin transactions than the network can process.
Clear &All
Clear &All
Balance:
Balance:
Confirm the send action
Confirm the send action
Priority:
low
high
S&end
S&end
Copy quantity
Copy amount
Copy fee
Copy after fee
Copy bytes
Copy dust
Copy change
%1 to %2
Are you sure you want to send?
added as transaction fee
Total Amount %1
or
Confirm send coins
The recipient address is not valid. Please recheck.
The amount to pay must be larger than 0.
The amount exceeds your balance.
The total exceeds your balance when the %1 transaction fee is included.
Duplicate address found: addresses should only be used once each.
Transaction creation failed!
The transaction was rejected with the following reason: %1
A fee higher than %1 is considered an absurdly high fee.
Payment request expired.
Pay only the required fee of %1
Warning: Invalid Dogecoin address
Warning: Unknown change address
Confirm custom change address
The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure?
(no label)
SendCoinsEntry
A&mount:
A&mount:
Pay &To:
Pay &To:
&Label:
&Label:
Choose previously used address
This is a normal payment.
The Dogecoin address to send the payment to
Alt+A
Alt+A
Paste address from clipboard
Paste address from clipboard
Alt+P
Alt+P
Remove this entry
The fee will be deducted from the amount being sent. The recipient will receive less dogecoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.
S&ubtract fee from amount
Message:
This is an unauthenticated payment request.
This is an authenticated payment request.
Enter a label for this address to add it to the list of used addresses
A message that was attached to the dogecoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Dogecoin network.
Pay To:
Memo:
Enter a label for this address to add it to your address book
SendConfirmationDialog
Yes
ShutdownWindow
%1 is shutting down...
Do not shut down the computer until this window disappears.
SignVerifyMessageDialog
Signatures - Sign / Verify a Message
Signatures - Sign / Verify a Message
&Sign Message
&Sign Message
You can sign messages/agreements with your addresses to prove you can receive dogecoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.
The Dogecoin address to sign the message with
Choose previously used address
Alt+A
Alt+A
Paste address from clipboard
Paste address from clipboard
Alt+P
Alt+P
Enter the message you want to sign here
Enter the message you want to sign here
Signature
Signature
Copy the current signature to the system clipboard
Copy the current signature to the system clipboard
Sign the message to prove you own this Dogecoin address
Sign &Message
Sign &Message
Reset all sign message fields
Reset all sign message fields
Clear &All
Clear &All
&Verify Message
&Verify Message
Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!
The Dogecoin address the message was signed with
Verify the message to ensure it was signed with the specified Dogecoin address
Verify &Message
Verify &Message
Reset all verify message fields
Reset all verify message fields
Click "Sign Message" to generate signature
The entered address is invalid.
Please check the address and try again.
The entered address does not refer to a key.
Wallet unlock was cancelled.
Private key for the entered address is not available.
Message signing failed.
Message signed.
The signature could not be decoded.
Please check the signature and try again.
The signature did not match the message digest.
Message verification failed.
Message verified.
SplashScreen
[testnet]
[testnet]
TestPeerDialog
Test Peer
Enter the peer details below.
Be careful! Do not blindly trust anyone that tells you to add their node.
Enter the peer's address
Enter the peer's port
Test!
Please enter an address.
Please enter a valid peer address.
Try Peer
TrafficGraphWidget
KB/s
TransactionDesc
Open for %n more block(s)
Open for %n more block
Open for %n more blocks
Open until %1
conflicted with a transaction with %1 confirmations
%1/offline
0/unconfirmed, %1
in memory pool
not in memory pool
abandoned
%1/unconfirmed
%1 confirmations
Status
, has not been successfully broadcast yet
, broadcast through %n node(s)
, broadcast through %n node
, broadcast through %n nodes
Date
Date
Source
Generated
From
unknown
To
own address
watch-only
label
Credit
matures in %n more block(s)
matures in %n more block
matures in %n more blocks
not accepted
Debit
Total debit
Total credit
Transaction fee
Net amount
Message
Comment
Transaction ID
Transaction total size
Output index
Merchant
Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
Debug information
Transaction
Inputs
Amount
Amount
true
false
TransactionDescDialog
This pane shows a detailed description of the transaction
This pane shows a detailed description of the transaction
Details for %1
TransactionTableModel
Date
Date
Type
Label
Open for %n more block(s)
Open for %n more block
Open for %n more blocks
Open until %1
Offline
Unconfirmed
Abandoned
Confirming (%1 of %2 recommended confirmations)
Confirmed (%1 confirmations)
Conflicted
Immature (%1 confirmations, will be available after %2)
This block was not received by any other nodes and will probably not be accepted!
Generated but not accepted
Received with
Received from
Sent to
Payment to yourself
Mined
watch-only
(n/a)
(no label)
Transaction status. Hover over this field to show number of confirmations.
Date and time that the transaction was received.
Type of transaction.
Whether or not a watch-only address is involved in this transaction.
User-defined intent/purpose of the transaction.
Amount removed from or added to balance.
TransactionView
All
Today
This week
This month
Last month
This year
Range...
Received with
Sent to
To yourself
Mined
Other
Enter address or label to search
Min amount
Abandon transaction
Copy address
Copy label
Copy amount
Copy transaction ID
Copy raw transaction
Copy full transaction details
Edit label
Show transaction details
Export Transaction History
Comma separated file (*.csv)
Confirmed
Confirmed
Watch-only
Date
Date
Type
Label
Address
ID
Exporting Failed
There was an error trying to save the transaction history to %1.
Exporting Successful
The transaction history was successfully saved to %1.
Range:
to
UnitDisplayStatusBarControl
Unit to show amounts in. Click to select another unit.
WalletFrame
No wallet has been loaded.
WalletModel
Send Coins
Send Coins
WalletView
&Export
&Export
Export the data in the current tab to a file
Export the data in the current tab to a file
Backup Wallet
Wallet Data (*.dat)
Backup Failed
There was an error trying to save the wallet data to %1.
Backup Successful
The wallet data was successfully saved to %1.
bitcoin-core
Dogecoin Core
Dogecoin Core
The %s developers
Bitcoin Core and Dogecoin Core
(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)
-maxtxfee is set very high! Fees this large could be paid on a single transaction.
A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)
Accept connections from outside (default: 1 if no -proxy or -connect/-noconnect)
Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)
Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times
Amount under which a transaction output is considered dust, in %s (default: %s)
Bind to given address and always listen on it. Use [host]:port notation for IPv6
Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)
Cannot obtain a lock on data directory %s. %s is probably already running.
Connect only to the specified node(s); -noconnect or -connect=0 alone to disable automatic connections
Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)
Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup
Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)
Distributed under the MIT software license, see the accompanying file %s or %s
Do not keep transactions in the mempool longer than <n> hours (default: %u)
Equivalent bytes per sigop in transactions for relay and mining (default: %u)
Error loading %s: You can't enable HD on a already existing non-HD wallet
Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.
Error: Listening for incoming connections failed (listen returned error %s)
Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)
Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
Extra transactions to keep in memory for compact block reconstructions (default: %u)
Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)
Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)
Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)
How thorough the block verification of -checkblocks is (0-4, default: %u)
If <category> is not supplied or if <category> = 1, output all debugging information.
If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)
If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)
Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)
Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)
Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)
Maximum size of data in data carrier transactions we relay and mine (default: %u)
Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)
Number of seconds to keep misbehaving peers from reconnecting (default: %u)
Output debugging information (default: %u, supplying <category> is optional)
Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.
Please contribute if you find %s useful. Visit %s for further information about the software.
Prune configured below the minimum of %d MiB. Please use a higher number.
Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node)
Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect/-noconnect)
Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)
Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)
Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again.
Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)
Set maximum size of high-priority/low-fee transactions in bytes (default: %d)
Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)
Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)
Support filtering of blocks and transaction with bloom filters (default: %u)
The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct
The transaction amount is too small to send after the fee has been deducted
This is a pre-release test build - use at your own risk - do not use for mining or merchant applications
This is the transaction fee you may pay when fee estimates are not available.
Execute command when the best block changes (%s in cmd is replaced by block hash, %i is replaced by block number)
-discardthreshold is set very high! This is the output amount that the wallet will discard (to fee) if it is smaller than this setting.
Amount under which a transaction output is considered non-standard and will not be accepted or relayed, in %s (default: %s)
Invalid amount for -discardthreshold=<amount>: '%s' (must be at least the dust limit of %s to prevent stuck transactions)
The minimum transaction output size (in %s) used to validate wallet transactions and discard change (to fee) (default: %s)
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. Paper wallet art provided by Anacoluthia.
Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.
Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)
Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain
Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.
Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay.
Use UPnP to map the listening port (default: 1 when listening and no -proxy)
Use hierarchical deterministic key generation (HD) after BIP32. Only has effect during wallet creation/first start
Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)
Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times
Wallet will not create transactions that violate mempool chain limits (default: %u)
Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.
Warning: Unknown block versions being mined! It's possible unknown rules are in effect
Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup.
Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.
Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.
Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway
You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain
You need to rebuild the database using -reindex-chainstate to change -txindex
%s corrupt, salvage failed
%s is set very high!
(default: %s)
(default: %u)
-maxmempool must be at least %d MB
<category> can be:
Accept command line and JSON-RPC commands
Accept public REST requests (default: %u)
Add a node to connect to and attempt to keep the connection open
Allow DNS lookups for -addnode, -seednode and -connect
Always query for peer addresses via DNS lookup (default: %u)
Amaze
Append comment to the user agent string
Attempt to recover private keys from a corrupt wallet on startup
Automatically create Tor hidden service (default: %d)
Block creation options:
Cannot downgrade wallet
Cannot resolve -%s address: '%s'
Cannot write default address
Chain selection options:
Change index out of range
Connect through SOCKS5 proxy
Connect to a node to retrieve peer addresses, and disconnect
Connection options:
Copyright (C) %i-%i
Corrupted block database detected
Debugging/Testing options:
Default
Do not load the wallet and disable wallet RPC calls
Do you want to rebuild the block database now?
Done loading
Enable publish hash block in <address>
Enable publish hash transaction in <address>
Enable publish raw block in <address>
Enable publish raw transaction in <address>
Enable transaction replacement in the memory pool (default: %u)
Error initializing block database
Error initializing wallet database environment %s!
Error loading %s
Error loading %s: Wallet corrupted
Error loading %s: Wallet requires newer version of %s
Error loading %s: You can't disable HD on a already existing HD wallet
Error loading block database
Error opening block database
Error reading from database, shutting down.
Error
Error
Error: A fatal internal error occurred, see debug.log for details
Error: Disk space is low!
Failed to listen on any port. Use -listen=0 if you want this.
Fee (in %s/kB) to add to transactions you send (default: %s)
How many blocks to check at startup (default: %u, 0 = all)
Importing...
Imports blocks from external blk000??.dat file on startup
Include IP addresses in debug output (default: %u)
Incorrect or no genesis block found. Wrong datadir for network?
Information
Information
Initialization sanity check failed. %s is shutting down.
Insufficient funds
Invalid -onion address: '%s'
Invalid -proxy address: '%s'
Invalid amount for -%s=<amount>: '%s'
Invalid amount for -fallbackfee=<amount>: '%s'
Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s)
Invalid netmask specified in -whitelist: '%s'
Keep at most <n> unconnectable transactions in memory (default: %u)
Keep the transaction memory pool below <n> megabytes (default: %u)
Keypool ran out, please call keypoolrefill first
Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)
Listen for connections on <port> (default: %u or testnet: %u)
Loading addresses...
Loading banlist...
Loading block index...
Loading wallet...
Location of the auth cookie (default: data dir)
Maintain at most <n> connections to peers (default: %u)
Make the wallet broadcast transactions
Many generous
Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)
Maximum per-connection send buffer, <n>*1000 bytes (default: %u)
Minimum
More
Need to specify a port with -whitebind: '%s'
Node relay options:
Not enough file descriptors available.
Only connect to nodes in network <net> (ipv4, ipv6 or onion)
Options:
Password for JSON-RPC connections
Prepend debug output with timestamp (default: %u)
Print this help message and exit
Print version and exit
Prune cannot be configured with a negative value.
Prune mode is incompatible with -txindex.
Pruning blockstore...
RPC server options:
Rebuild chain state and block index from the blk*.dat files on disk
Rebuild chain state from the currently indexed blocks
Receive and display P2P network alerts (default: %u)
Reducing -maxconnections from %d to %d, because of system limitations.
Relay and mine data carrier transactions (default: %u)
Relay non-P2SH multisig (default: %u)
Rescan the block chain for missing wallet transactions on startup
Rescanning...
Rescanning...
Rewinding blocks...
Run in the background as a daemon and accept commands
Send trace/debug info to console instead of debug.log file
Send transactions as zero-fee transactions if possible (default: %u)
Send transactions with full-RBF opt-in enabled (default: %u)
Set database cache size in megabytes (%d to %d, default: %d)
Set key pool size to <n> (default: %u)
Set maximum BIP141 block weight (default: %d)
Set maximum block size in bytes (default: %d)
Set the number of threads to service RPC calls (default: %d)
Show all debugging options (usage: --help -help-debug)
Shrink debug.log file on client startup (default: 1 when no -debug)
Signing transaction failed
Specify configuration file (default: %s)
Specify connection timeout in milliseconds (minimum: 1, default: %d)
Specify data directory
Specify pid file (default: %s)
Specify wallet file (within data directory)
Specify your own public address
Spend unconfirmed change when sending transactions (default: %u)
Starting network threads...
Such expensive
The source code is available from %s.
The transaction amount is too small to pay the fee
The wallet will avoid paying less than the minimum relay fee.
This is experimental software.
This is the minimum transaction fee you pay on every transaction.
This is the transaction fee you will pay if you send a transaction.
Threshold for disconnecting misbehaving peers (default: %u)
Tor control port password (default: empty)
Tor control port to use if onion listening enabled (default: %s)
Transaction amount too small
Transaction amounts must not be negative
Transaction has too long of a mempool chain
Transaction must have at least one recipient
Transaction too large for fee policy
Transaction too large
Unable to bind to %s on this computer (bind returned error %s)
Unable to bind to %s on this computer. %s is probably already running.
Unable to start HTTP server. See debug log for details.
Unknown network specified in -onlynet: '%s'
Unsupported argument -benchmark ignored, use -debug=bench.
Unsupported argument -debugnet ignored, use -debug=net.
Unsupported argument -tor found, use -onion.
Upgrade wallet to latest format on startup
Use Namecoin-compatible AuxPow API structure, (default: %u)
Use UPnP to map the listening port (default: %u)
Use the test chain
User Agent comment (%s) contains unsafe characters.
Username for JSON-RPC connections
Verifying blocks...
Verifying wallet...
Wallet %s resides outside data directory %s
Wallet debugging/testing options:
Wallet needed to be rewritten: restart %s to complete
Wallet options:
Warning
Warning
Warning: unknown new rules activated (versionbit %i)
Whether to operate in a blocks only mode (default: %u)
Wow
Zapping all transactions from wallet...
ZeroMQ notification options: