212 lines
15 KiB
Markdown
212 lines
15 KiB
Markdown
# Support for Output Descriptors in Bitcoin Core
|
|
|
|
Since Bitcoin Core v0.17, there is support for Output Descriptors. This is a
|
|
simple language which can be used to describe collections of output scripts.
|
|
Supporting RPCs are:
|
|
- `scantxoutset` takes as input descriptors to scan for, and also reports
|
|
specialized descriptors for the matching UTXOs.
|
|
- `getdescriptorinfo` analyzes a descriptor, and reports a canonicalized version
|
|
with checksum added.
|
|
- `deriveaddresses` takes as input a descriptor and computes the corresponding
|
|
addresses.
|
|
- `listunspent` outputs a specialized descriptor for the reported unspent outputs.
|
|
- `getaddressinfo` outputs a descriptor for solvable addresses (since v0.18).
|
|
- `importmulti` takes as input descriptors to import into the wallet
|
|
(since v0.18).
|
|
- `generatetodescriptor` takes as input a descriptor and generates coins to it
|
|
(`regtest` only, since v0.19).
|
|
- `utxoupdatepsbt` takes as input descriptors to add information to the psbt
|
|
(since v0.19).
|
|
- `createmultisig` and `addmultisigaddress` return descriptors as well (since v0.20)
|
|
|
|
This document describes the language. For the specifics on usage, see the RPC
|
|
documentation for the functions mentioned above.
|
|
|
|
## Features
|
|
|
|
Output descriptors currently support:
|
|
- Pay-to-pubkey scripts (P2PK), through the `pk` function.
|
|
- Pay-to-pubkey-hash scripts (P2PKH), through the `pkh` function.
|
|
- Pay-to-witness-pubkey-hash scripts (P2WPKH), through the `wpkh` function.
|
|
- Pay-to-script-hash scripts (P2SH), through the `sh` function.
|
|
- Pay-to-witness-script-hash scripts (P2WSH), through the `wsh` function.
|
|
- Multisig scripts, through the `multi` function.
|
|
- Multisig scripts where the public keys are sorted lexicographically, through the `sortedmulti` function.
|
|
- Any type of supported address through the `addr` function.
|
|
- Raw hex scripts through the `raw` function.
|
|
- Public keys (compressed and uncompressed) in hex notation, or BIP32 extended pubkeys with derivation paths.
|
|
|
|
## Examples
|
|
|
|
- `pk(0279be667ef9dcbbac55a06295ce870b07029bfcdb2dce28d959f2815b16f81798)` describes a P2PK output with the specified public key.
|
|
- `pkh(02c6047f9441ed7d6d3045406e95c07cd85c778e4b8cef3ca7abac09b95c709ee5)` describes a P2PKH output with the specified public key.
|
|
- `wpkh(02f9308a019258c31049344f85f89d5229b531c845836f99b08601f113bce036f9)` describes a P2WPKH output with the specified public key.
|
|
- `sh(wpkh(03fff97bd5755eeea420453a14355235d382f6472f8568a18b2f057a1460297556))` describes a P2SH-P2WPKH output with the specified public key.
|
|
- `combo(0279be667ef9dcbbac55a06295ce870b07029bfcdb2dce28d959f2815b16f81798)` describes any P2PK, P2PKH, P2WPKH, or P2SH-P2WPKH output with the specified public key.
|
|
- `sh(wsh(pkh(02e493dbf1c10d80f3581e4904930b1404cc6c13900ee0758474fa94abe8c4cd13)))` describes an (overly complicated) P2SH-P2WSH-P2PKH output with the specified public key.
|
|
- `multi(1,022f8bde4d1a07209355b4a7250a5c5128e88b84bddc619ab7cba8d569b240efe4,025cbdf0646e5db4eaa398f365f2ea7a0e3d419b7e0330e39ce92bddedcac4f9bc)` describes a bare *1-of-2* multisig output with keys in the specified order.
|
|
- `sh(multi(2,022f01e5e15cca351daff3843fb70f3c2f0a1bdd05e5af888a67784ef3e10a2a01,03acd484e2f0c7f65309ad178a9f559abde09796974c57e714c35f110dfc27ccbe))` describes a P2SH *2-of-2* multisig output with keys in the specified order.
|
|
- `sh(sortedmulti(2,03acd484e2f0c7f65309ad178a9f559abde09796974c57e714c35f110dfc27ccbe,022f01e5e15cca351daff3843fb70f3c2f0a1bdd05e5af888a67784ef3e10a2a01))` describes a P2SH *2-of-2* multisig output with keys sorted lexicographically in the resulting redeemScript.
|
|
- `wsh(multi(2,03a0434d9e47f3c86235477c7b1ae6ae5d3442d49b1943c2b752a68e2a47e247c7,03774ae7f858a9411e5ef4246b70c65aac5649980be5c17891bbec17895da008cb,03d01115d548e7561b15c38f004d734633687cf4419620095bc5b0f47070afe85a))` describes a P2WSH *2-of-3* multisig output with keys in the specified order.
|
|
- `sh(wsh(multi(1,03f28773c2d975288bc7d1d205c3748651b075fbc6610e58cddeeddf8f19405aa8,03499fdf9e895e719cfd64e67f07d38e3226aa7b63678949e6e49b241a60e823e4,02d7924d4f7d43ea965a465ae3095ff41131e5946f3c85f79e44adbcf8e27e080e)))` describes a P2SH-P2WSH *1-of-3* multisig output with keys in the specified order.
|
|
- `pk(xpub661MyMwAqRbcFtXgS5sYJABqqG9YLmC4Q1Rdap9gSE8NqtwybGhePY2gZ29ESFjqJoCu1Rupje8YtGqsefD265TMg7usUDFdp6W1EGMcet8)` describes a P2PK output with the public key of the specified xpub.
|
|
- `pkh(xpub68Gmy5EdvgibQVfPdqkBBCHxA5htiqg55crXYuXoQRKfDBFA1WEjWgP6LHhwBZeNK1VTsfTFUHCdrfp1bgwQ9xv5ski8PX9rL2dZXvgGDnw/1'/2)` describes a P2PKH output with child key *1'/2* of the specified xpub.
|
|
- `pkh([d34db33f/44'/0'/0']xpub6ERApfZwUNrhLCkDtcHTcxd75RbzS1ed54G1LkBUHQVHQKqhMkhgbmJbZRkrgZw4koxb5JaHWkY4ALHY2grBGRjaDMzQLcgJvLJuZZvRcEL/1/*)` describes a set of P2PKH outputs, but additionally specifies that the specified xpub is a child of a master with fingerprint `d34db33f`, and derived using path `44'/0'/0'`.
|
|
- `wsh(multi(1,xpub661MyMwAqRbcFW31YEwpkMuc5THy2PSt5bDMsktWQcFF8syAmRUapSCGu8ED9W6oDMSgv6Zz8idoc4a6mr8BDzTJY47LJhkJ8UB7WEGuduB/1/0/*,xpub69H7F5d8KSRgmmdJg2KhpAK8SR3DjMwAdkxj3ZuxV27CprR9LgpeyGmXUbC6wb7ERfvrnKZjXoUmmDznezpbZb7ap6r1D3tgFxHmwMkQTPH/0/0/*))` describes a set of *1-of-2* P2WSH multisig outputs where the first multisig key is the *1/0/`i`* child of the first specified xpub and the second multisig key is the *0/0/`i`* child of the second specified xpub, and `i` is any number in a configurable range (`0-1000` by default).
|
|
- `wsh(sortedmulti(1,xpub661MyMwAqRbcFW31YEwpkMuc5THy2PSt5bDMsktWQcFF8syAmRUapSCGu8ED9W6oDMSgv6Zz8idoc4a6mr8BDzTJY47LJhkJ8UB7WEGuduB/1/0/*,xpub69H7F5d8KSRgmmdJg2KhpAK8SR3DjMwAdkxj3ZuxV27CprR9LgpeyGmXUbC6wb7ERfvrnKZjXoUmmDznezpbZb7ap6r1D3tgFxHmwMkQTPH/0/0/*))` describes a set of *1-of-2* P2WSH multisig outputs where one multisig key is the *1/0/`i`* child of the first specified xpub and the other multisig key is the *0/0/`i`* child of the second specified xpub, and `i` is any number in a configurable range (`0-1000` by default). The order of public keys in the resulting witnessScripts is determined by the lexicographic order of the public keys at that index.
|
|
|
|
## Reference
|
|
|
|
Descriptors consist of several types of expressions. The top level expression is either a `SCRIPT`, or `SCRIPT#CHECKSUM` where `CHECKSUM` is an 8-character alphanumeric descriptor checksum.
|
|
|
|
`SCRIPT` expressions:
|
|
- `sh(SCRIPT)` (top level only): P2SH embed the argument.
|
|
- `wsh(SCRIPT)` (not inside another 'wsh'): P2WSH embed the argument.
|
|
- `pk(KEY)` (anywhere): P2PK output for the given public key.
|
|
- `pkh(KEY)` (anywhere): P2PKH output for the given public key (use `addr` if you only know the pubkey hash).
|
|
- `wpkh(KEY)` (not inside `wsh`): P2WPKH output for the given compressed pubkey.
|
|
- `combo(KEY)` (top level only): an alias for the collection of `pk(KEY)` and `pkh(KEY)`. If the key is compressed, it also includes `wpkh(KEY)` and `sh(wpkh(KEY))`.
|
|
- `multi(k,KEY_1,KEY_2,...,KEY_n)` (anywhere): k-of-n multisig script.
|
|
- `sortedmulti(k,KEY_1,KEY_2,...,KEY_n)` (anywhere): k-of-n multisig script with keys sorted lexicographically in the resulting script.
|
|
- `addr(ADDR)` (top level only): the script which ADDR expands to.
|
|
- `raw(HEX)` (top level only): the script whose hex encoding is HEX.
|
|
|
|
`KEY` expressions:
|
|
- Optionally, key origin information, consisting of:
|
|
- An open bracket `[`
|
|
- Exactly 8 hex characters for the fingerprint of the key where the derivation starts (see BIP32 for details)
|
|
- Followed by zero or more `/NUM` or `/NUM'` path elements to indicate unhardened or hardened derivation steps between the fingerprint and the key or xpub/xprv root that follows
|
|
- A closing bracket `]`
|
|
- Followed by the actual key, which is either:
|
|
- Hex encoded public keys (either 66 characters starting with `02` or `03` for a compressed pubkey, or 130 characters starting with `04` for an uncompressed pubkey).
|
|
- Inside `wpkh` and `wsh`, only compressed public keys are permitted.
|
|
- [WIF](https://en.bitcoin.it/wiki/Wallet_import_format) encoded private keys may be specified instead of the corresponding public key, with the same meaning.
|
|
- `xpub` encoded extended public key or `xprv` encoded extended private key (as defined in [BIP 32](https://github.com/bitcoin/bips/blob/master/bip-0032.mediawiki)).
|
|
- Followed by zero or more `/NUM` unhardened and `/NUM'` hardened BIP32 derivation steps.
|
|
- Optionally followed by a single `/*` or `/*'` final step to denote all (direct) unhardened or hardened children.
|
|
- The usage of hardened derivation steps requires providing the private key.
|
|
|
|
(Anywhere a `'` suffix is permitted to denote hardened derivation, the suffix `h` can be used instead.)
|
|
|
|
`ADDR` expressions are any type of supported address:
|
|
- P2PKH addresses (base58, of the form `1...` for mainnet or `[nm]...` for testnet). Note that P2PKH addresses in descriptors cannot be used for P2PK outputs (use the `pk` function instead).
|
|
- P2SH addresses (base58, of the form `3...` for mainnet or `2...` for testnet, defined in [BIP 13](https://github.com/bitcoin/bips/blob/master/bip-0013.mediawiki)).
|
|
- Segwit addresses (bech32, of the form `bc1...` for mainnet or `tb1...` for testnet, defined in [BIP 173](https://github.com/bitcoin/bips/blob/master/bip-0173.mediawiki)).
|
|
|
|
## Explanation
|
|
|
|
### Single-key scripts
|
|
|
|
Many single-key constructions are used in practice, generally including
|
|
P2PK, P2PKH, P2WPKH, and P2SH-P2WPKH. Many more combinations are
|
|
imaginable, though they may not be optimal: P2SH-P2PK, P2SH-P2PKH,
|
|
P2WSH-P2PK, P2WSH-P2PKH, P2SH-P2WSH-P2PK, P2SH-P2WSH-P2PKH.
|
|
|
|
To describe these, we model these as functions. The functions `pk`
|
|
(P2PK), `pkh` (P2PKH) and `wpkh` (P2WPKH) take as input a `KEY` expression, and return the
|
|
corresponding *scriptPubKey*. The functions `sh` (P2SH) and `wsh` (P2WSH)
|
|
take as input a `SCRIPT` expression, and return the script describing P2SH and P2WSH
|
|
outputs with the input as embedded script. The names of the functions do
|
|
not contain "p2" for brevity.
|
|
|
|
### Multisig
|
|
|
|
Several pieces of software use multi-signature (multisig) scripts based
|
|
on Bitcoin's OP_CHECKMULTISIG opcode. To support these, we introduce the
|
|
`multi(k,key_1,key_2,...,key_n)` and `sortedmulti(k,key_1,key_2,...,key_n)`
|
|
functions. They represent a *k-of-n*
|
|
multisig policy, where any *k* out of the *n* provided `KEY` expressions must
|
|
sign.
|
|
|
|
Key order is significant for `multi()`. A `multi()` expression describes a multisig script
|
|
with keys in the specified order, and in a search for TXOs, it will not match
|
|
outputs with multisig scriptPubKeys that have the same keys in a different
|
|
order. Also, to prevent a combinatorial explosion of the search space, if more
|
|
than one of the `multi()` key arguments is a BIP32 wildcard path ending in `/*`
|
|
or `*'`, the `multi()` expression only matches multisig scripts with the `i`th
|
|
child key from each wildcard path in lockstep, rather than scripts with any
|
|
combination of child keys from each wildcard path.
|
|
|
|
Key order does not matter for `sortedmulti()`. `sortedmulti()` behaves in the same way
|
|
as `multi()` does but the keys are reordered in the resulting script such that they
|
|
are lexicographically ordered as described in BIP67.
|
|
|
|
### BIP32 derived keys and chains
|
|
|
|
Most modern wallet software and hardware uses keys that are derived using
|
|
BIP32 ("HD keys"). We support these directly by permitting strings
|
|
consisting of an extended public key (commonly referred to as an *xpub*)
|
|
plus derivation path anywhere a public key is expected. The derivation
|
|
path consists of a sequence of 0 or more integers (in the range
|
|
*0..2<sup>31</sup>-1*) each optionally followed by `'` or `h`, and
|
|
separated by `/` characters. The string may optionally end with the
|
|
literal `/*` or `/*'` (or `/*h`) to refer to all unhardened or hardened
|
|
child keys in a configurable range (by default `0-1000`, inclusive).
|
|
|
|
Whenever a public key is described using a hardened derivation step, the
|
|
script cannot be computed without access to the corresponding private
|
|
key.
|
|
|
|
### Key origin identification
|
|
|
|
In order to describe scripts whose signing keys reside on another device,
|
|
it may be necessary to identify the master key and derivation path an
|
|
xpub was derived with.
|
|
|
|
For example, when following BIP44, it would be useful to describe a
|
|
change chain directly as `xpub.../44'/0'/0'/1/*` where `xpub...`
|
|
corresponds with the master key `m`. Unfortunately, since there are
|
|
hardened derivation steps that follow the xpub, this descriptor does not
|
|
let you compute scripts without access to the corresponding private keys.
|
|
Instead, it should be written as `xpub.../1/*`, where xpub corresponds to
|
|
`m/44'/0'/0'`.
|
|
|
|
When interacting with a hardware device, it may be necessary to include
|
|
the entire path from the master down. [BIP174](https://github.com/bitcoin/bips/blob/master/bip-0174.mediawiki) standardizes this by
|
|
providing the master key *fingerprint* (first 32 bit of the Hash160 of
|
|
the master pubkey), plus all derivation steps. To support constructing
|
|
these, we permit providing this key origin information inside the
|
|
descriptor language, even though it does not affect the actual
|
|
scriptPubKeys it refers to.
|
|
|
|
Every public key can be prefixed by an 8-character hexadecimal
|
|
fingerprint plus optional derivation steps (hardened and unhardened)
|
|
surrounded by brackets, identifying the master and derivation path the key or xpub
|
|
that follows was derived with.
|
|
|
|
Note that the fingerprint of the parent only serves as a fast way to detect
|
|
parent and child nodes in software, and software must be willing to deal with
|
|
collisions.
|
|
|
|
### Including private keys
|
|
|
|
Often it is useful to communicate a description of scripts along with the
|
|
necessary private keys. For this reason, anywhere a public key or xpub is
|
|
supported, a private key in WIF format or xprv may be provided instead.
|
|
This is useful when private keys are necessary for hardened derivation
|
|
steps, or for dumping wallet descriptors including private key material.
|
|
|
|
### Compatibility with old wallets
|
|
|
|
In order to easily represent the sets of scripts currently supported by
|
|
existing Bitcoin Core wallets, a convenience function `combo` is
|
|
provided, which takes as input a public key, and describes a set of P2PK,
|
|
P2PKH, P2WPKH, and P2SH-P2WPH scripts for that key. In case the key is
|
|
uncompressed, the set only includes P2PK and P2PKH scripts.
|
|
|
|
### Checksums
|
|
|
|
Descriptors can optionally be suffixed with a checksum to protect against
|
|
typos or copy-paste errors.
|
|
|
|
These checksums consist of 8 alphanumeric characters. As long as errors are
|
|
restricted to substituting characters in `0123456789()[],'/*abcdefgh@:$%{}`
|
|
for others in that set and changes in letter case, up to 4 errors will always
|
|
be detected in descriptors up to 501 characters, and up to 3 errors in longer
|
|
ones. For larger numbers of errors, or other types of errors, there is a
|
|
roughly 1 in a trillion chance of not detecting the errors.
|
|
|
|
All RPCs in Bitcoin Core will include the checksum in their output. Only
|
|
certain RPCs require checksums on input, including `deriveaddress` and
|
|
`importmulti`. The checksum for a descriptor without one can be computed
|
|
using the `getdescriptorinfo` RPC.
|