kibana/x-pack/plugins/alerts

Kibana alerting

The Kibana alerting plugin provides a common place to set up alerts. You can:

• Register types of alerts
• List the types of registered alerts
• Perform CRUD actions on alerts

---

Table of Contents

• Kibana alerting
  • Terminology
  • Usage
  • Limitations
  • Alert types
    • Methods
    • Executor
    • Example
  • Role Based Access-Control
  • Alert Navigation
  • RESTful API
    • POST /api/alerts/alert: Create alert
    • DELETE /api/alerts/alert/{id}: Delete alert
    • GET /api/alerts/_find: Find alerts
    • GET /api/alerts/alert/{id}: Get alert
    • GET /api/alerts/alert/{id}/state: Get alert state
    • GET /api/alerts/list_alert_types: List alert types
    • PUT /api/alerts/alert/{id}: Update alert
    • POST /api/alerts/alert/{id}/_enable: Enable an alert
    • POST /api/alerts/alert/{id}/_disable: Disable an alert
    • POST /api/alerts/alert/{id}/_mute_all: Mute all alert instances
    • POST /api/alerts/alert/{alert_id}/alert_instance/{alert_instance_id}/_mute: Mute alert instance
    • POST /api/alerts/alert/{id}/_unmute_all: Unmute all alert instances
    • POST /api/alerts/alert/{alertId}/alert_instance/{alertInstanceId}/_unmute: Unmute an alert instance
    • POST /api/alerts/alert/{id}/_update_api_key: Update alert API key
  • Schedule Formats
  • Alert instance factory
  • Templating actions
  • Examples

Terminology

Alert Type: A function that takes parameters and executes actions to alert instances.

Alert: A configuration that defines a schedule, an alert type w/ parameters, state information and actions.

Alert Instance: The instance(s) created from an alert type execution.

A Kibana alert detects a condition and executes one or more actions when that condition occurs. Alerts work by going through the followings steps:

1. Run a periodic check to detect a condition (the check is provided by an Alert Type)
2. Convert that condition into one or more stateful Alert Instances
3. Map Alert Instances to pre-defined Actions, using templating
4. Execute the Actions

Usage

1. Develop and register an alert type (see alert types -> example).
2. Configure feature level privileges using RBAC
3. Create an alert using the RESTful API (see alerts -> create).

Limitations

When security is enabled, an SSL connection to Elasticsearch is required in order to use alerting.

When security is enabled, users who create alerts will need the manage_api_key cluster privilege. There is currently work in progress to remove this requirement.

Note that the manage_own_api_key cluster privilege is not enough - it can be used to create API keys, but not invalidate them, and the alerting plugin currently both creates and invalidates APIs keys as part of it's processing. When using only the manage_own_api_key privilege, you will see the following message logged in the server when the alerting plugin attempts to invalidate an API key:

[error][alerting][plugins] Failed to invalidate API Key: [security_exception] \
    action [cluster:admin/xpack/security/api_key/invalidate] \
    is unauthorized for user [user-name-here]

Alert types

Methods

server.newPlatform.setup.plugins.alerts.registerType(options)

The following table describes the properties of the options object.

Property	Description	Type
id	Unique identifier for the alert type. For convention purposes, ids starting with . are reserved for built in alert types. We recommend using a convention like <plugin_id>.mySpecialAlert for your alert types to avoid conflicting with another plugin.	string
name	A user-friendly name for the alert type. These will be displayed in dropdowns when choosing alert types.	string
actionGroups	An explicit list of groups the alert type may schedule actions for, each specifying the ActionGroup's unique ID and human readable name. Alert actions validation will use this configuartion to ensure groups are valid. We highly encourage using kbn-i18n to translate the names of actionGroup when registering the AlertType.	Array<{id:string, name:string}>
defaultActionGroupId	Default ID value for the group of the alert type.	string
actionVariables	An explicit list of action variables the alert type makes available via context and state in action parameter templates, and a short human readable description. Alert UI will use this to display prompts for the users for these variables, in action parameter editors. We highly encourage using kbn-i18n to translate the descriptions.	{ context: Array<{name:string, description:string}, state: Array<{name:string, description:string}>
validate.params	When developing an alert type, you can choose to accept a series of parameters. You may also have the parameters validated before they are passed to the executor function or created as an alert saved object. In order to do this, provide a @kbn/config-schema schema that we will use to validate the params attribute.	@kbn/config-schema
executor	This is where the code of the alert type lives. This is a function to be called when executing an alert on an interval basis. For full details, see executor section below.	Function
producer	The id of the application producing this alert type.	string

Executor

This is the primary function for an alert type. Whenever the alert needs to execute, this function will perform the execution. It receives a variety of parameters. The following table describes the properties the executor receives.

executor(options)

Property	Description
services.callCluster(path, opts)	Use this to do Elasticsearch queries on the cluster Kibana connects to. This function is the same as any other callCluster in Kibana but in the context of the user who created the alert when security is enabled.
services.savedObjectsClient	This is an instance of the saved objects client. This provides the ability to do CRUD on any saved objects within the same space the alert lives in. The scope of the saved objects client is tied to the user who created the alert (only when security isenabled).
services.getLegacyScopedClusterClient	This function returns an instance of the LegacyScopedClusterClient scoped to the user who created the alert when security is enabled.
services.alertInstanceFactory(id)	This alert instance factory creates instances of alerts and must be used in order to execute actions. The id you give to the alert instance factory is a unique identifier to the alert instance.
services.log(tags, [data], [timestamp])	Use this to create server logs. (This is the same function as server.log)
startedAt	The date and time the alert type started execution.
previousStartedAt	The previous date and time the alert type started a successful execution.
params	Parameters for the execution. This is where the parameters you require will be passed in. (example threshold). Use alert type validation to ensure values are set before execution.
state	State returned from previous execution. This is the alert level state. What the executor returns will be serialized and provided here at the next execution.
alertId	The id of this alert.
spaceId	The id of the space of this alert.
namespace	The namespace of the space of this alert; same as spaceId, unless spaceId === 'default', then namespace = undefined.
name	The name of this alert.
tags	The tags associated with this alert.
createdBy	The userid that created this alert.
updatedBy	The userid that last updated this alert.

The actionVariables property

This property should contain the flattened names of the state and context variables available when an executor calls alertInstance.scheduleActions(actionGroup, context). These names are meant to be used in prompters in the alerting user interface, are used as text values for display, and can be inserted into to an action parameter text entry field via UI gesture (eg, clicking a menu item from a menu built with these names). They should be flattened, so if a state or context variable is an object with properties, these should be listed with the "parent" property/properties in the name, separated by a . (period).

For example, if the context has one variable foo which is an object that has one property bar, and there are no state variables, the actionVariables value would be in the following shape:

{
	context: [
		{ name: 'foo.bar', description: 'the ultra-exciting bar property' },
	]
}

Example

This example receives server and threshold as parameters. It will read the CPU usage of the server and schedule actions to be executed (asynchronously by the task manager) if the reading is greater than the threshold.

import { schema } from '@kbn/config-schema';
...
server.newPlatform.setup.plugins.alerts.registerType({
	id: 'my-alert-type',
	name: 'My alert type',
	validate: {
		params: schema.object({
			server: schema.string(),
			threshold: schema.number({ min: 0, max: 1 }),
		}),
	},
	actionGroups: [
		{
			id: 'default',
			name: 'Default',
		},
		{
			id: 'warning',
			name: 'Warning',
		},
	],
	defaultActionGroupId: 'default',
	actionVariables: {
		context: [
			{ name: 'server', description: 'the server' },
			{ name: 'hasCpuUsageIncreased', description: 'boolean indicating if the cpu usage has increased' },
		],
		state: [
			{ name: 'cpuUsage', description: 'CPU usage' },
		],
	},
	async executor({
    alertId,
		startedAt,
		previousStartedAt,
		services,
		params,
		state,
	}: AlertExecutorOptions) {
		// Let's assume params is { server: 'server_1', threshold: 0.8 }
		const { server, threshold } = params;

		// Call a function to get the server's current CPU usage
		const currentCpuUsage = await getCpuUsage(server);

		// Only execute if CPU usage is greater than threshold
		if (currentCpuUsage > threshold) {
			// The first argument is a unique identifier the alert instance is about. In this scenario
			// the provided server will be used. Also, this id will be used to make `getState()` return
			// previous state, if any, on matching identifiers.
			const alertInstance = services.alertInstanceFactory(server);

			// State from last execution. This will exist if an alert instance was created and executed
			// in the previous execution
			const { cpuUsage: previousCpuUsage } = alertInstance.getState();

			// Replace state entirely with new values
			alertInstance.replaceState({
				cpuUsage: currentCpuUsage,
			});

			// 'default' refers to the id of a group of actions to be scheduled for execution, see 'actions' in create alert section
			alertInstance.scheduleActions('default', {
				server,
				hasCpuUsageIncreased: currentCpuUsage > previousCpuUsage,
			});
		}

		// Returning updated alert type level state, this will become available
		// within the `state` function parameter at the next execution
		return {
			// This is an example attribute you could set, it makes more sense to use this state when
			// the alert type executes multiple instances but wants a single place to track certain values.
			lastChecked: new Date(),
		};
	},
	producer: 'alerting',
});

This example only receives threshold as a parameter. It will read the CPU usage of all the servers and schedule individual actions if the reading for a server is greater than the threshold. This is a better implementation than above as only one query is performed for all the servers instead of one query per server.

server.newPlatform.setup.plugins.alerts.registerType({
	id: 'my-alert-type',
	name: 'My alert type',
	validate: {
		params: schema.object({
			threshold: schema.number({ min: 0, max: 1 }),
		}),
	},
	actionGroups: [
		{
			id: 'default',
			name: 'Default',
		},
	],
	defaultActionGroupId: 'default',
	actionVariables: {
		context: [
			{ name: 'server', description: 'the server' },
			{ name: 'hasCpuUsageIncreased', description: 'boolean indicating if the cpu usage has increased' },
		],
		state: [
			{ name: 'cpuUsage', description: 'CPU usage' },
		],
	},
	async executor({
    alertId,
		startedAt,
		previousStartedAt,
		services,
		params,
		state,
	}: AlertExecutorOptions) {
		const { threshold } = params; // Let's assume params is { threshold: 0.8 }

		// Call a function to get the CPU readings on all the servers. The result will be
		// an array of { server, cpuUsage }.
		const cpuUsageByServer = await getCpuUsageByServer();

		for (const { server, cpuUsage: currentCpuUsage } of cpuUsageByServer) {
			// Only execute if CPU usage is greater than threshold
			if (currentCpuUsage > threshold) {
				// The first argument is a unique identifier the alert instance is about. In this scenario
				// the provided server will be used. Also, this id will be used to make `getState()` return
				// previous state, if any, on matching identifiers.
				const alertInstance = services.alertInstanceFactory(server);

				// State from last execution. This will exist if an alert instance was created and executed
				// in the previous execution
				const { cpuUsage: previousCpuUsage } = alertInstance.getState();

				// Replace state entirely with new values
				alertInstance.replaceState({
					cpuUsage: currentCpuUsage,
				});

				// 'default' refers to the id of a group of actions to be scheduled for execution, see 'actions' in create alert section
				alertInstance.scheduleActions('default', {
					server,
					hasCpuUsageIncreased: currentCpuUsage > previousCpuUsage,
				});
			}
		}

		// Single object containing state that isn't specific to a server, this will become available
		// within the `state` function parameter at the next execution
		return {
			lastChecked: new Date(),
		};
	},
	producer: 'alerting',
});

Role Based Access-Control

Once you have registered your AlertType, you need to grant your users privileges to use it. When registering a feature in Kibana you can specify multiple types of privileges which are granted to users when they're assigned certain roles.

Assuming your feature introduces its own AlertTypes, you'll want to control which roles have all/read privileges for these AlertTypes when they're inside the feature. In addition, when users are inside your feature you might want to grant them access to AlertTypes from other features, such as built-in AlertTypes or AlertTypes provided by other features.

You can control all of these abilities by assigning privileges to the Alerting Framework from within your own feature, for example:

features.registerFeature({
	id: 'my-application-id',
	name: 'My Application',
	app: [],
	privileges: {
		all: {
			alerting: {
				all: [
					// grant `all` over our own types
					'my-application-id.my-alert-type',
					'my-application-id.my-restricted-alert-type',
					// grant `all` over the built-in IndexThreshold
					'.index-threshold',
					// grant `all` over Uptime's TLS AlertType
					'xpack.uptime.alerts.actionGroups.tls'
				],
			},
		},
		read: {
			alerting: {
				read: [
					// grant `read` over our own type
					'my-application-id.my-alert-type',
					// grant `read` over the built-in IndexThreshold
					'.index-threshold', 
					// grant `read` over Uptime's TLS AlertType
					'xpack.uptime.alerts.actionGroups.tls'
				],
			},
		},
	},
});

In this example we can see the following:

• Our feature grants any user who's assigned the all role in our feature the all role in the Alerting framework over every alert of the my-application-id.my-alert-type type which is created inside the feature. What that means is that this privilege will allow the user to execute any of the all operations (listed below) on these alerts as long as their consumer is my-application-id. Below that you'll notice we've done the same with the read role, which is grants the Alerting Framework's read role privileges over these very same alerts.
• In addition, our feature grants the same privileges over any alert of type my-application-id.my-restricted-alert-type, which is another hypothetical alertType registered by this feature. It's worth noting though that this type has been omitted from the read role. What this means is that only users with the all role will be able to interact with alerts of this type.
• Next, lets look at the .index-threshold and xpack.uptime.alerts.actionGroups.tls types. These have been specified in both read and all, which means that all the users in the feature will gain privileges over alerts of these types (as long as their consumer is my-application-id). The difference between these two and the previous two is that they are produced by other features! .index-threshold is a built-in type, provided by the Built-In Alerts feature, and xpack.uptime.alerts.actionGroups.tls is an AlertType provided by the Uptime feature. Specifying these type here tells the Alerting Framework that as far as the my-application-id feature is concerned, the user is privileged to use them (with all and read applied), but that isn't enough. Using another feature's AlertType is only possible if both the producer of the AlertType, and the consumer of the AlertType, explicitly grant privileges to do so. In this case, the Built-In Alerts & Uptime features would have to explicitly add these privileges to a role and this role would have to be granted to this user.

It's important to note that any role can be granted a mix of all and read privileges accross multiple type, for example:

features.registerFeature({
	id: 'my-application-id',
	name: 'My Application',
	app: [],
	privileges: {
		all: {
			alerting: {
				all: [
					'my-application-id.my-alert-type',
					'my-application-id.my-restricted-alert-type'
				],
			},
		},
		read: {
			alerting: {
				all: [
					'my-application-id.my-alert-type'
				]
				read: [
					'my-application-id.my-restricted-alert-type'
				],
			},
		},
	},
});

In the above example, you note that instead of denying users with the read role any access to the my-application-id.my-restricted-alert-type type, we've decided that these users should be granted read privileges over the resitricted AlertType. As part of that same change, we also decided that not only should they be allowed to read the restricted AlertType, but actually, despite having read privileges to the feature as a whole, we do actually want to allow them to create our basic 'my-application-id.my-alert-type' AlertType, as we consider it an extension of reading data in our feature, rather than writing it.

read privileges vs. all privileges

When a user is granted the read role in the Alerting Framework, they will be able to execute the following api calls:

• get
• getAlertState
• find

When a user is granted the all role in the Alerting Framework, they will be able to execute all of the read privileged api calls, but in addition they'll be granted the following calls:

• create
• delete
• update
• enable
• disable
• updateApiKey
• muteAll
• unmuteAll
• muteInstance
• unmuteInstance

Finally, all users, whether they're granted any role or not, are privileged to call the following:

• listAlertTypes, but the output is limited to displaying the AlertTypes the user is perivileged to get

Attempting to execute any operation the user isn't privileged to execute will result in an Authorization error thrown by the AlertsClient.

Alert Navigation

When registering an Alert Type, you'll likely want to provide a way of viewing alerts of that type within your own plugin, or perhaps you want to provide a view for all alerts created from within your solution within your own UI.

In order for the Alerting framework to know that your plugin has its own internal view for displaying an alert, you must resigter a navigation handler within the framework.

A navigation handler is nothing more than a function that receives an Alert and its corresponding AlertType, and is expected to then return the path within your plugin which knows how to display this alert.

The signature of such a handler is:

type AlertNavigationHandler = (
  alert: SanitizedAlert,
  alertType: AlertType
) => string;

There are two ways to register this handler. By specifying alerting as a dependency of your public (client side) plugin, you'll gain access to two apis: alerting.registerNavigation and alerting.registerDefaultNavigation.

registerNavigation

The registerNavigation api allows you to register a handler for a specific alert type within your solution:

alerting.registerNavigation(
	'my-application-id',
	'my-application-id.my-alert-type',
	(alert: SanitizedAlert, alertType: AlertType) => `/my-unique-alert/${alert.id}`
);

This tells the Alerting framework that, given an alert of the AlertType whose ID is my-application-id.my-unique-alert-type, if that Alert's consumer value (which is set when the alert is created by your plugin) is your application (whose id is my-application-id), then it will navigate to your application using the path /my-unique-alert/${the id of the alert}.

The navigation is handled using the navigateToApp api, meaning that the path will be automatically picked up by your react-router-dom Route component, so all you have top do is configure a Route that handles the path /my-unique-alert/:id.

You can look at the alerting-example plugin to see an example of using this API, which is enabled using the --run-examples flag when you run yarn start.

registerDefaultNavigation

The registerDefaultNavigation api allows you to register a handler for any alert type within your solution:

alerting.registerDefaultNavigation(
	'my-application-id',
	(alert: SanitizedAlert, alertType: AlertType) => `/my-other-alerts/${alert.id}`
);

This tells the Alerting framework that, given any alert whose consumer value is your application, as long as then it will navigate to your application using the path /my-other-alerts/${the id of the alert}.

balancing both APIs side by side

As we mentioned, using registerDefaultNavigation will tell the Alerting Framework that your application can handle any type of Alert we throw at it, as long as your application created it, using the handler you provide it.

The only case in which this handler will not be used to evaluate the navigation for an alert (assuming your application is the consumer) is if you have also used registerNavigation api, along side your registerDefaultNavigation usage, to handle that alert's specific AlertType.

You can use the registerNavigation api to specify as many AlertType specific handlers as you like, but you can only use it once per AlertType as we wouldn't know which handler to use if you specified two for the same AlertType. For the same reason, you can only use registerDefaultNavigation once per plugin, as it covers all cases for your specific plugin.

RESTful API

Using an alert type requires you to create an alert that will contain parameters and actions for a given alert type. See below for CRUD operations using the API.

POST /api/alerts/alert: Create alert

Payload:

Property	Description	Type
enabled	Indicate if you want the alert to start executing on an interval basis after it has been created.	boolean
name	A name to reference and search in the future.	string
tags	A list of keywords to reference and search in the future.	string[]
alertTypeId	The id value of the alert type you want to call when the alert is scheduled to execute.	string
schedule	The schedule specifying when this alert should be run, using one of the available schedule formats specified under Schedule Formats below	object
throttle	A Duration specifying how often this alert should fire the same actions. This will prevent the alert from sending out the same notification over and over. For example, if an alert with a schedule of 1 minute stays in a triggered state for 90 minutes, setting a throttle of 10m or 1h will prevent it from sending 90 notifications over this period.	string
params	The parameters to pass in to the alert type executor params value. This will also validate against the alert type params validator if defined.	object
actions	Array of the following: - group (string): We support grouping actions in the scenario of escalations or different types of alert instances. If you don't need this, feel free to use default as a value. - id (string): The id of the action saved object to execute. - params (object): The map to the params the action type will receive. In order to help apply context to strings, we handle them as mustache templates and pass in a default set of context. (see templating actions).	array

DELETE /api/alerts/alert/{id}: Delete alert

Params:

Property	Description	Type
id	The id of the alert you're trying to delete.	string

GET /api/alerts/_find: Find alerts

Params:

See the saved objects API documentation for find. All the properties are the same except you cannot pass in type.

GET /api/alerts/alert/{id}: Get alert

Params:

Property	Description	Type
id	The id of the alert you're trying to get.	string

GET /api/alerts/alert/{id}/state: Get alert state

Params:

Property	Description	Type
id	The id of the alert whose state you're trying to get.	string

GET /api/alerts/list_alert_types: List alert types

No parameters.

PUT /api/alerts/alert/{id}: Update alert

Params:

Property	Description	Type
id	The id of the alert you're trying to update.	string

Payload:

Property	Description	Type
schedule	The schedule specifying when this alert should be run, using one of the available schedule formats specified under Schedule Formats below	object
throttle	A Duration specifying how often this alert should fire the same actions. This will prevent the alert from sending out the same notification over and over. For example, if an alert with a schedule of 1 minute stays in a triggered state for 90 minutes, setting a throttle of 10m or 1h will prevent it from sending 90 notifications over this period.	string
name	A name to reference and search in the future.	string
tags	A list of keywords to reference and search in the future.	string[]
params	The parameters to pass in to the alert type executor params value. This will also validate against the alert type params validator if defined.	object
actions	Array of the following: - group (string): We support grouping actions in the scenario of escalations or different types of alert instances. If you don't need this, feel free to use default as a value. - id (string): The id of the action saved object to execute. - params (object): There map to the params the action type will receive. In order to help apply context to strings, we handle them as mustache templates and pass in a default set of context. (see templating actions).	array

POST /api/alerts/alert/{id}/_enable: Enable an alert

Params:

Property	Description	Type
id	The id of the alert you're trying to enable.	string

POST /api/alerts/alert/{id}/_disable: Disable an alert

Params:

Property	Description	Type
id	The id of the alert you're trying to disable.	string

POST /api/alerts/alert/{id}/_mute_all: Mute all alert instances

Params:

Property	Description	Type
id	The id of the alert you're trying to mute all alert instances for.	string

POST /api/alerts/alert/{alert_id}/alert_instance/{alert_instance_id}/_mute: Mute alert instance

Params:

Property	Description	Type
alertId	The id of the alert you're trying to mute an instance for.	string
alertInstanceId	The instance id of the alert instance you're trying to mute.	string

POST /api/alerts/alert/{id}/_unmute_all: Unmute all alert instances

Params:

Property	Description	Type
id	The id of the alert you're trying to unmute all alert instances for.	string

POST /api/alerts/alert/{alertId}/alert_instance/{alertInstanceId}/_unmute: Unmute an alert instance

Params:

Property	Description	Type
alertId	The id of the alert you're trying to unmute an instance for.	string
alertInstanceId	The instance id of the alert instance you're trying to unmute.	string

POST /api/alerts/alert/{id}/_update_api_key: Update alert API key

Property	Description	Type
id	The id of the alert you're trying to update the API key for. System will use user in request context to generate an API key for.	string

Schedule Formats

A schedule is structured such that the key specifies the format you wish to use and its value specifies the schedule.

We currently support the Interval format which specifies the interval in seconds, minutes, hours or days at which the alert should execute. Example: { interval: "10s" }, { interval: "5m" }, { interval: "1h" }, { interval: "1d" }.

There are plans to support multiple other schedule formats in the near future.

Alert instance factory

alertInstanceFactory(id)

One service passed in to alert types is an alert instance factory. This factory creates instances of alerts and must be used in order to execute actions. The id you give to the alert instance factory is a unique identifier to the alert instance (ex: server identifier if the instance is about the server). The instance factory will use this identifier to retrieve the state of previous instances with the same id. These instances support state persisting between alert type execution, but will clear out once the alert instance stops executing.

Note that the id only needs to be unique within the scope of a specific alert, not unique across all alerts or alert types. For example, Alert 1 and Alert 2 can both create an alert instance with an id of "a" without conflicting with one another. But if Alert 1 creates 2 alert instances, then they must be differentiated with ids of "a" and "b".

This factory returns an instance of AlertInstance. The alert instance class has the following methods, note that we have removed the methods that you shouldn't touch.

Method	Description
getState()	Get the current state of the alert instance.
scheduleActions(actionGroup, context)	Called to schedule the execution of actions. The actionGroup is a string id that relates to the group of alert actions to execute and the context will be used for templating purposes. This should only be called once per alert instance.
replaceState(state)	Used to replace the current state of the alert instance. This doesn't work like react, the entire state must be provided. Use this feature as you see fit. The state that is set will persist between alert type executions whenever you re-create an alert instance with the same id. The instance state will be erased when scheduleActions isn't called during an execution.

Templating actions

There needs to be a way to map alert context into action parameters. For this, we started off by adding template support. Any string within the params of an alert saved object's actions will be processed as a template and can inject context or state values.

When an alert instance executes, the first argument is the group of actions to execute and the second is the context the alert exposes to templates. We iterate through each action params attributes recursively and render templates if they are a string. Templates have access to the following "variables":

• context - provided by second argument of .scheduleActions(...) on an alert instance
• state - the alert instance's state provided by the most recent replaceState call on an alert instance
• alertId - the id of the alert
• alertInstanceId - the alert instance id
• alertName - the name of the alert
• spaceId - the id of the space the alert exists in
• tags - the tags set in the alert

The templating engine is mustache. General definition for the mustache variable is a double-brace {{}}. All variables are HTML-escaped by default and if there is a requirement to render unescaped HTML, it should be applied the triple mustache: {{{name}}}. Also, can be used & to unescape a variable.

Examples

The following code would be within an alert type. As you can see cpuUsage will replace the state of the alert instance and server is the context for the alert instance to execute. The difference between the two is cpuUsage will be accessible at the next execution.

alertInstanceFactory('server_1')
  .replaceState({
    cpuUsage: 80,
  })
  .scheduleActions('default', {
    server: 'server_1',
  });

Below is an example of an alert that takes advantage of templating:

{
  ...
  id: "123",
  name: "cpu alert",
  actions: [
    {
      "group": "default",
      "id": "3c5b2bd4-5424-4e4b-8cf5-c0a58c762cc5",
      "params": {
        "from": "example@elastic.co",
        "to": ["destination@elastic.co"],
        "subject": "A notification about {{context.server}}"
        "body": "The server {{context.server}} has a CPU usage of {{state.cpuUsage}}%. This message for {{alertInstanceId}} was created by the alert {{alertId}} {{alertName}}."
      }
    }
  ]
}

The templating system will take the alert and alert type as described above and convert the action parameters to the following:

{
  "from": "example@elastic.co",
  "to": ["destination@elastic.co"],
  "subject": "A notification about server_1"
  "body": "The server server_1 has a CPU usage of 80%. This message for server_1 was created by the alert 123 cpu alert"
}

There are limitations that we are aware of using only templates, and we are gathering feedback and use cases for these. (for example passing an array of strings to an action).