Commit graph

186 commits

Author SHA1 Message Date
Denis V. Lunev
eb86757931 [IPV6]: inet6_dev on loopback should be kept until namespace stop.
In the other case it will be destroyed when last address will be removed
from lo inside a namespace. This will break IPv6 in several places. The
most obvious one is ip6_dst_ifdown.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 13:31:53 -07:00
Denis V. Lunev
439e23857a [IPV6]: Event type in addrconf_ifdown is mis-used.
addrconf_ifdown is broken in respect to the usage of how
parameter. This function is called with (event != NETDEV_DOWN) and (2)
on the IPv6 stop.  It the latter case inet6_dev from loopback device
should be destroyed.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 13:30:17 -07:00
Benoit Boissinot
eac55bf970 IPv6: do not create temporary adresses with too short preferred lifetime
From RFC341:
A temporary address is created only if this calculated Preferred
Lifetime is greater than REGEN_ADVANCE time units.  In particular, an
implementation must not create a temporary address with a zero
Preferred Lifetime.

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:01:35 -07:00
Benoit Boissinot
c6fbfac2e6 IPv6: only update the lifetime of the relevant temporary address
When receiving a prefix information from a routeur, only update the
lifetimes of the temporary address associated with that prefix.

Otherwise if one deprecated prefix is advertized, all your temporary
addresses will become deprecated.

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:00:58 -07:00
Benjamin Thery
f1243c2db6 [IPV6]: Add missing initializations of the new nl_info.nl_net field
Add some more missing initializations of the new nl_info.nl_net field
in IPv6 stack. This field will be used when network namespaces are
fully supported.

Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26 18:42:37 -08:00
YOSHIFUJI Hideaki
5d5619b40c [IPV6] ADDRCONF: Sparse: Make inet6_dump_addr() code paths more straight-forward.
Fix the following sparse warning:
| net/ipv6/addrconf.c:3384:2: warning: context imbalance in 'inet6_dump_addr' - different lock contexts for basic block

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28 15:10:28 -08:00
Stephen Hemminger
d20b3109e9 [IPV6]: addrconf sparse warnings
Get rid of a couple of sparse warnings in IPV6 addrconf code.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:37 -08:00
Daniel Lezcano
389f661224 [NETNS][IPV6]: inet6_addr - make ipv6_chk_home_addr namespace aware
Looks if the address is belonging to the network namespace, otherwise
discard the address for the check.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:46 -08:00
Daniel Lezcano
1cab3da6be [NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware
The inet6_addr_lst is browsed taking into account the network
namespace specified as parameter. If an address does not belong
to the specified namespace, it is ignored.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:45 -08:00
Daniel Lezcano
06bfe655e7 [NETNS][IPV6]: inet6_addr - ipv6_chk_same_addr namespace aware
This patch makes ipv6_chk_same_addr function to be aware of the
network namespace. The addresses not belonging to the network
namespace are discarded.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:45 -08:00
Daniel Lezcano
bfeade0870 [NETNS][IPV6]: inet6_addr - check ipv6 address per namespace
When a new address is added, we must check if the new address does not
already exists.  This patch makes this check to be aware of a network
namespace, so the check will look if the address already exists for
the specified network namespace. While the addresses are browsed, the
addresses which do not belong to the namespace are discarded.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:44 -08:00
Daniel Lezcano
3c40090a0f [NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file
Make /proc/net/if_inet6 show only inet6 addresses belonging to the
namespace.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:43 -08:00
Pavel Emelyanov
e186932b3d [NETNS]: Use the per-net ipv6_devconf(_all) in sysctl handlers
Actually the net->ipv6.devconf_all can be used in a few places,
but to keep the /proc/sys/net/ipv6/conf/ sysctls work consistently
in the namespace we should use the per-net devconf_all in the
sysctl "forwarding" handler.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:41 -08:00
Pavel Emelyanov
441fc2a239 [NETNS]: Use the per-net ipv6_devconf_dflt
All its users are in net/ipv6/addrconf.c's sysctl handlers.
Since they already have the struct net to get from, the
per-net ipv6_devconf_dflt can already be used.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:40 -08:00
Pavel Emelyanov
e0da5a480c [NETNS]: Create ipv6 devconf-s for namespaces
This is the core. Declare and register the pernet subsys for
addrconf. The init callback the will create the devconf-s.

The init_net will reuse the existing statically declared confs,
so that accessing them from inside the ipv6 code will still
work.

The register_pernet_subsys() is moved above the ipv6_add_dev()
call for loopback, because this function will need the
net->devconf_dflt pointer to be already set.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:40 -08:00
Pavel Emelyanov
bff16c2f99 [NETNS]: Make the ctl-tables per-namespace
This includes passing the net to __addrconf_sysctl_register
and saving this on the ctl_table->extra2 to be used in
handlers (those, needing it).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:39 -08:00
Pavel Emelyanov
9589731220 [NETNS]: Make the __addrconf_sysctl_register return an error
This error code will be needed to abort the namespace
creation if needed.

Probably, this is to be checked when a new device is
created (currently it is ignored).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:38 -08:00
Pavel Emelyanov
408c4768cd [NETNS]: Clean out the ipv6-related sysctls creation/destruction
The addrconf sysctls and neigh sysctls are registered and
unregistered always in pairs, so they can be joined into
one (well, two) functions, that accept the struct inet6_dev
and do all the job.

This also get rids of unneeded ifdefs inside the code.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:38 -08:00
Daniel Lezcano
09f7709f49 [IPV6]: fix section mismatch warnings
Removed useless and buggy __exit section in the different
ipv6 subsystems. Otherwise they will be called inside an
init section during rollbacking in case of an error in the
protocol initialization.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:46 -08:00
YOSHIFUJI Hideaki
c69bce20dd [NET]: Remove unused "mibalign" argument for snmp_mib_init().
With fixes from Arnaldo Carvalho de Melo.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:02 -08:00
Pavel Emelyanov
c8fecf2242 [IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding
The only difference in this case is that updating all.forwarding
causes the update in default.forwarding when done via proc, but
not via the system call.

Besides, this consolidates a good portion of code.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:32 -08:00
Pavel Emelyanov
1dab62226d [IPV6]: Use ctl paths to register addrconf sysctls
This looks very much like the patch for ipv4's devinet.

This is also intended to help us with the net namespaces
and saves the ipv6.ko size by ~320 bytes.

The difference from the first version is just the patch
offsets, that changed due to changes in the patch #2.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:55:38 -08:00
Pavel Emelyanov
f52295a9c5 [IPV6]: Unify and cleanup calls to addrconf_sysctl_register
Currently this call is (ab)used similar to devinet one - it
registers sysctls for devices and for the "default" confs, while
the "all" sysctls are registered separately. But unlike its
devinet brother, the passed inet6_device is needed.

The fix is to make a __addrconf_sysctl_register(), which registers
sysctls for all "devices" we need, including "default" and "all" :)

The original addrconf_sysctl_register() calls the introduced
function, passing the inet6_device, device name and ifindex (to
be used as procname and ctl_name) into it.

Thanks to Herbert again for pointing out, that we can shrink the
argument list to 1 :)

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:55:38 -08:00
Pavel Emelyanov
f68635e627 [IPV6]: Cleanup the addconf_sysctl_register
This only includes fixing the space-indented lines and
removing one unneeded else after the goto.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:55:26 -08:00
Fred L. Templin
c7dc89c0ac [IPV6]: Add RFC4214 support
This patch includes support for the Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) per RFC4214. It uses the SIT
module, and is configured using extensions to the "iproute2"
utility. The diffs are specific to the Linux 2.6.24-rc2 kernel
distribution.

This version includes the diff for ./include/linux/if.h which was
missing in the v2.4 submission and is needed to make the
patch compile. The patch has been installed, compiled and
tested in a clean 2.6.24-rc2 kernel build area.

Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:55:09 -08:00
Denis V. Lunev
97c53cacf0 [NET]: Make rtnetlink infrastructure network namespace aware (v3)
After this patch none of the netlink callback support anything
except the initial network namespace but the rtnetlink infrastructure
now handles multiple network namespaces.

Changes from v2:
- IPv6 addrlabel processing

Changes from v1:
- no need for special rtnl_unlock handling
- fixed IPv6 ndisc

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:54:25 -08:00
Denis V. Lunev
b854272b3c [NET]: Modify all rtnetlink methods to only work in the initial namespace (v2)
Before I can enable rtnetlink to work in all network namespaces I need
to be certain that something won't break.  So this patch deliberately
disables all of the rtnletlink methods in everything except the
initial network namespace.  After the methods have been audited this
extra check can be disabled.

Changes from v1:
- added IPv6 addrlabel protection

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-28 14:54:24 -08:00
YOSHIFUJI Hideaki
2a8cc6c890 [IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.
Policy table is implemented as an RCU linear list since we do not expect
large list nor frequent updates.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:58 -08:00
YOSHIFUJI Hideaki
303065a854 [IPV6] ADDRCONF: Allow address selection policy with ifindex.
This patch allows ifindex to be a key for address selection policy table.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:57 -08:00
YOSHIFUJI Hideaki
c1ee656ccb [IPV6] ADDRCONF: Rename ipv6_saddr_label() to ipv6_addr_label().
This patch renames ipv6_saddr_label() to ipv6_addr_label() because
address label is used for both of source address and destination
address.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:56 -08:00
Pavel Emelyanov
b24b8a247f [NET]: Convert init_timer into setup_timer
Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:35 -08:00
Evgeniy Polyakov
d31c7b8fa3 [IPV6]: Restore IPv6 when MTU is big enough
Avaid provided test application, so bug got fixed.

IPv6 addrconf removes ipv6 inner device from netdev each time cmu
changes and new value is less than IPV6_MIN_MTU (1280 bytes).
When mtu is changed and new value is greater than IPV6_MIN_MTU,
it does not add ipv6 addresses and inner device bac.

This patch fixes that.

Tested with Avaid's application, which works ok now.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 23:36:08 +11:00
Joe Perches
3b6d821c4f [IPV6]: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 23:47:25 -08:00
Daniel Lezcano
1675c7b254 [IPV6]: remove duplicate call to proc_net_remove
The file /proc/net/if_inet6 is removed twice.
First time in:
        inet6_exit
             ->addrconf_cleanup
And followed a few lines after by:
        inet6_exit
             -> if6_proc_exit

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 21:16:24 -07:00
Pavel Emelyanov
aaf70ec7fd [IPV6]: Cleanup snmp6_alloc_dev()
This functions is never called with NULL or not setup argument,
so the checks inside are redundant.

Also, the return value is always -ENOMEM, so no need in 
additional variable for this.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 21:25:32 -07:00
Pavel Emelyanov
16910b9829 [IPV6]: Fix return type for snmp6_free_dev()
This call is essentially void.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 21:23:43 -07:00
Mitsuru Chinen
f24e3d658c [IPV6]: Defer IPv6 device initialization until a valid qdisc is specified
To judge the timing for DAD, netif_carrier_ok() is used. However,
there is a possibility that dev->qdisc stays noop_qdisc even if
netif_carrier_ok() returns true. In that case, DAD NS is not sent out.
We need to defer the IPv6 device initialization until a valid qdisc
is specified.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:52 -07:00
Pavel Emelyanov
cf7732e4cc [NET]: Make core networking code use seq_open_private
This concerns the ipv4 and ipv6 code mostly, but also the netlink
and unix sockets.

The netlink code is an example of how to use the __seq_open_private()
call - it saves the net namespace on this private.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:33 -07:00
Eric W. Biederman
2774c7aba6 [NET]: Make the loopback device per network namespace.
This patch makes loopback_dev per network namespace.  Adding
code to create a different loopback device for each network
namespace and adding the code to free a loopback device
when a network namespace exits.

This patch modifies all users the loopback_dev so they
access it as init_net.loopback_dev, keeping all of the
code compiling and working.  A later pass will be needed to
update the users to use something other than the initial network
namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:49 -07:00
Daniel Lezcano
de3cb747ff [NET]: Dynamically allocate the loopback device, part 1.
This patch replaces all occurences to the static variable
loopback_dev to a pointer loopback_dev. That provides the
mindless, trivial, uninteressting change part for the dynamic
allocation for the loopback.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-By: Kirill Korotaev <dev@sw.ru>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:14 -07:00
David L Stevens
14878f75ab [IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]
Background: RFC 4293 deprecates existing individual, named ICMP
type counters to be replaced with the ICMPMsgStatsTable. This table
includes entries for both IPv4 and IPv6, and requires counting of all
ICMP types, whether or not the machine implements the type.

These patches "remove" (but not really) the existing counters, and
replace them with the ICMPMsgStats tables for v4 and v6.
It includes the named counters in the /proc places they were, but gets the
values for them from the new tables. It also counts packets generated
from raw socket output (e.g., OutEchoes, MLD queries, RA's from
radvd, etc).

Changes:
1) create icmpmsg_statistics mib
2) create icmpv6msg_statistics mib
3) modify existing counters to use these
4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types
        listed by number for easy SNMP parsing
5) modify /proc/net/snmp printing for "Icmp" to get the named data
        from new counters.
[new to 2nd revision]
6) support per-interface ICMP stats
7) use common macro for per-device stat macros

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:27 -07:00
Milan Kocian
0b69d4bd26 [IPV6]: Remove redundant RTM_DELLINK message.
Remove useless message. We get the right message from another
subsystem.

Signed-off-by: Milan Kocian <milon@wq.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:18 -07:00
Eric W. Biederman
881d966b48 [NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:10 -07:00
Eric W. Biederman
e9dc865340 [NET]: Make device event notification network namespace safe
Every user of the network device notifiers is either a protocol
stack or a pseudo device.  If a protocol stack that does not have
support for multiple network namespaces receives an event for a
device that is not in the initial network namespace it quite possibly
can get confused and do the wrong thing.

To avoid problems until all of the protocol stacks are converted
this patch modifies all netdev event handlers to ignore events on
devices that are not in the initial network namespace.

As the rest of the code is made network namespace aware these
checks can be removed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:09 -07:00
Eric W. Biederman
457c4cbc5a [NET]: Make /proc/net per network namespace
This patch makes /proc/net per network namespace.  It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.

Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:06 -07:00
Jiri Kosina
6ae5f983cf [IPV6]: Fix source address selection.
The commit 95c385 broke proper source address selection for cases in which 
there is a address which is makred 'deprecated'. The commit mistakenly 
changed ifa->flags to ifa_result->flags (probably copy/paste error from a 
few lines above) in the 'Rule 3' address selection code.

The patch restores the previous RFC-compliant behavior.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 14:48:21 -07:00
Herbert Xu
b217d616a1 [IPV4/IPV6]: Fail registration if inet device construction fails
Now that netdev notifications can fail, we can use this to signal
errors during registration for IPv4/IPv6.  In particular, if we
fail to allocate memory for the inet device, we can fail the netdev
registration.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:16 -07:00
Vlad Yasevich
063ed369c9 [IPV6]: Call inet6addr_chain notifiers on link down
Currently if the link is brought down via ip link or ifconfig down,
the inet6addr_chain notifiers are not called even though all
the addresses are removed from the interface.  This caused SCTP
to add duplicate addresses to it's list.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15 00:16:35 -07:00
Philippe De Muyter
56b3d975bb [NET]: Make all initialized struct seq_operations const.
Make all initialized struct seq_operations in net/ const

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:07:31 -07:00
Micah Gruber
dffe4f048b [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().
This trivial patch removes the unneeded pointer idev returned from
__in6_dev_get(), which is never used. The check for NULL can be simply
done by if (__in6_dev_get(dev) == NULL).

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:04:19 -07:00