linux/drivers/net/hplance.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

26 lines
1.3 KiB
C

/* Random defines and structures for the HP Lance driver.
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
* Based on the Sun Lance driver and the NetBSD HP Lance driver
*/
/* Registers */
#define HPLANCE_ID 0x01 /* DIO register: ID byte */
#define HPLANCE_STATUS 0x03 /* DIO register: interrupt enable/status */
/* Control and status bits for the status register */
#define LE_IE 0x80 /* interrupt enable */
#define LE_IR 0x40 /* interrupt requested */
#define LE_LOCK 0x08 /* lock status register */
#define LE_ACK 0x04 /* ack of lock */
#define LE_JAB 0x02 /* loss of tx clock (???) */
/* We can also extract the IPL from the status register with the standard
* DIO_IPL(hplance) macro, or using dio_scodetoipl()
*/
/* These are the offsets for the DIO regs (hplance_reg), lance_ioreg,
* memory and NVRAM:
*/
#define HPLANCE_IDOFF 0 /* board baseaddr */
#define HPLANCE_REGOFF 0x4000 /* lance registers */
#define HPLANCE_MEMOFF 0x8000 /* struct lance_init_block */
#define HPLANCE_NVRAMOFF 0xC008 /* etheraddress as one *nibble* per byte */