4c243c8584
Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
107 lines
3.9 KiB
Makefile
107 lines
3.9 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support (must be linked before board specific support)
|
|
obj-y += clock.o devices.o generic.o irq.o \
|
|
time.o reset.o
|
|
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
|
|
|
|
ifeq ($(CONFIG_CPU_FREQ),y)
|
|
obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
|
|
obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
|
|
obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
|
|
endif
|
|
|
|
# Generic drivers that other drivers may depend upon
|
|
|
|
# SoC-specific code
|
|
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
|
|
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
|
|
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
|
|
obj-$(CONFIG_CPU_PXA300) += pxa300.o
|
|
obj-$(CONFIG_CPU_PXA320) += pxa320.o
|
|
obj-$(CONFIG_CPU_PXA930) += pxa930.o
|
|
|
|
# NOTE: keep the order of boards in accordance to their order in Kconfig
|
|
|
|
# Intel/Marvell Dev Platforms
|
|
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
|
|
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
|
|
obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
|
|
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
|
|
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
|
|
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
|
|
obj-$(CONFIG_MACH_SAAR) += saar.o
|
|
|
|
# 3rd Party Dev Platforms
|
|
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
|
|
obj-$(CONFIG_ARCH_VIPER) += viper.o
|
|
obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
|
|
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
|
|
obj-$(CONFIG_MACH_CSB726) += csb726.o
|
|
obj-$(CONFIG_CSB726_CSB701) += csb701.o
|
|
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
|
|
ifeq ($(CONFIG_PCI),y)
|
|
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
|
|
endif
|
|
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
|
|
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
|
|
obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
|
|
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
|
|
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
|
|
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
|
|
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
|
|
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
|
|
obj-$(CONFIG_MACH_XCEP) += xcep.o
|
|
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
|
|
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
|
|
obj-$(CONFIG_MACH_PCM027) += pcm027.o
|
|
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
|
|
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
|
|
obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
|
|
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
|
|
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
|
|
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
|
|
|
|
# End-user Products
|
|
obj-$(CONFIG_MACH_H4700) += hx4700.o
|
|
obj-$(CONFIG_MACH_H5000) += h5000.o
|
|
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
|
|
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
|
|
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
|
|
obj-$(CONFIG_PXA_EZX) += ezx.o
|
|
obj-$(CONFIG_MACH_MP900C) += mp900.o
|
|
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
|
|
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
|
|
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
|
|
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
|
|
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
|
|
obj-$(CONFIG_MACH_PALMLD) += palmld.o
|
|
obj-$(CONFIG_PALM_TREO) += palmtreo.o
|
|
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
|
|
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
|
|
obj-$(CONFIG_MACH_POODLE) += poodle.o
|
|
obj-$(CONFIG_MACH_TOSA) += tosa.o
|
|
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
|
|
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
|
|
obj-$(CONFIG_MACH_E330) += e330.o
|
|
obj-$(CONFIG_MACH_E350) += e350.o
|
|
obj-$(CONFIG_MACH_E740) += e740.o
|
|
obj-$(CONFIG_MACH_E750) += e750.o
|
|
obj-$(CONFIG_MACH_E400) += e400.o
|
|
obj-$(CONFIG_MACH_E800) += e800.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
|
|
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
|
|
|
|
# Support for blinky lights
|
|
led-y := leds.o
|
|
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
|
|
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
|
|
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
|
|
|
|
obj-$(CONFIG_LEDS) += $(led-y)
|
|
|
|
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
|