In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
246 lines
6.1 KiB
C
246 lines
6.1 KiB
C
/*
|
|
* OMAP2xxx DVFS virtual clock functions
|
|
*
|
|
* Copyright (C) 2005-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2010 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
|
|
* Gordon McNutt and RidgeRun, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* XXX Some of this code should be replaceable by the upcoming OPP layer
|
|
* code. However, some notion of "rate set" is probably still necessary
|
|
* for OMAP2xxx at least. Rate sets should be generalized so they can be
|
|
* used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff
|
|
* has in the past expressed a preference to use rate sets for OPP changes,
|
|
* rather than dynamically recalculating the clock tree, so if someone wants
|
|
* this badly enough to write the code to handle it, we should support it
|
|
* as an option.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/sram.h>
|
|
#include <plat/sdrc.h>
|
|
|
|
#include "clock.h"
|
|
#include "clock2xxx.h"
|
|
#include "opp2xxx.h"
|
|
#include "cm2xxx_3xxx.h"
|
|
#include "cm-regbits-24xx.h"
|
|
|
|
const struct prcm_config *curr_prcm_set;
|
|
const struct prcm_config *rate_table;
|
|
|
|
/**
|
|
* omap2_table_mpu_recalc - just return the MPU speed
|
|
* @clk: virt_prcm_set struct clk
|
|
*
|
|
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
|
|
*/
|
|
unsigned long omap2_table_mpu_recalc(struct clk *clk)
|
|
{
|
|
return curr_prcm_set->mpu_speed;
|
|
}
|
|
|
|
/*
|
|
* Look for a rate equal or less than the target rate given a configuration set.
|
|
*
|
|
* What's not entirely clear is "which" field represents the key field.
|
|
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
|
|
* just uses the ARM rates.
|
|
*/
|
|
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
const struct prcm_config *ptr;
|
|
long highest_rate;
|
|
|
|
highest_rate = -EINVAL;
|
|
|
|
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
|
|
if (!(ptr->flags & cpu_mask))
|
|
continue;
|
|
if (ptr->xtal_speed != sclk->rate)
|
|
continue;
|
|
|
|
highest_rate = ptr->mpu_speed;
|
|
|
|
/* Can check only after xtal frequency check */
|
|
if (ptr->mpu_speed <= rate)
|
|
break;
|
|
}
|
|
return highest_rate;
|
|
}
|
|
|
|
/* Sets basic clocks based on the specified rate */
|
|
int omap2_select_table_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
u32 cur_rate, done_rate, bypass = 0, tmp;
|
|
const struct prcm_config *prcm;
|
|
unsigned long found_speed = 0;
|
|
unsigned long flags;
|
|
|
|
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
|
|
if (!(prcm->flags & cpu_mask))
|
|
continue;
|
|
|
|
if (prcm->xtal_speed != sclk->rate)
|
|
continue;
|
|
|
|
if (prcm->mpu_speed <= rate) {
|
|
found_speed = prcm->mpu_speed;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found_speed) {
|
|
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
|
|
rate / 1000000);
|
|
return -EINVAL;
|
|
}
|
|
|
|
curr_prcm_set = prcm;
|
|
cur_rate = omap2xxx_clk_get_core_rate(dclk);
|
|
|
|
if (prcm->dpll_speed == cur_rate / 2) {
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
|
|
} else if (prcm->dpll_speed == cur_rate * 2) {
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
|
} else if (prcm->dpll_speed != cur_rate) {
|
|
local_irq_save(flags);
|
|
|
|
if (prcm->dpll_speed == prcm->xtal_speed)
|
|
bypass = 1;
|
|
|
|
if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
|
|
CORE_CLK_SRC_DPLL_X2)
|
|
done_rate = CORE_CLK_SRC_DPLL_X2;
|
|
else
|
|
done_rate = CORE_CLK_SRC_DPLL;
|
|
|
|
/* MPU divider */
|
|
cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
|
|
|
|
/* dsp + iva1 div(2420), iva2.1(2430) */
|
|
cm_write_mod_reg(prcm->cm_clksel_dsp,
|
|
OMAP24XX_DSP_MOD, CM_CLKSEL);
|
|
|
|
cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
|
|
|
|
/* Major subsystem dividers */
|
|
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
|
|
cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
|
|
CM_CLKSEL1);
|
|
|
|
if (cpu_is_omap2430())
|
|
cm_write_mod_reg(prcm->cm_clksel_mdm,
|
|
OMAP2430_MDM_MOD, CM_CLKSEL);
|
|
|
|
/* x2 to enter omap2xxx_sdrc_init_params() */
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
|
|
|
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
|
|
bypass);
|
|
|
|
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
|
|
omap2xxx_sdrc_reprogram(done_rate, 0);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
/*
|
|
* Walk PRCM rate table and fillout cpufreq freq_table
|
|
* XXX This should be replaced by an OPP layer in the near future
|
|
*/
|
|
static struct cpufreq_frequency_table *freq_table;
|
|
|
|
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
|
|
{
|
|
const struct prcm_config *prcm;
|
|
int i = 0;
|
|
int tbl_sz = 0;
|
|
|
|
if (!cpu_is_omap24xx())
|
|
return;
|
|
|
|
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
|
|
if (!(prcm->flags & cpu_mask))
|
|
continue;
|
|
if (prcm->xtal_speed != sclk->rate)
|
|
continue;
|
|
|
|
/* don't put bypass rates in table */
|
|
if (prcm->dpll_speed == prcm->xtal_speed)
|
|
continue;
|
|
|
|
tbl_sz++;
|
|
}
|
|
|
|
/*
|
|
* XXX Ensure that we're doing what CPUFreq expects for this error
|
|
* case and the following one
|
|
*/
|
|
if (tbl_sz == 0) {
|
|
pr_warning("%s: no matching entries in rate_table\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
/* Include the CPUFREQ_TABLE_END terminator entry */
|
|
tbl_sz++;
|
|
|
|
freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
|
|
GFP_ATOMIC);
|
|
if (!freq_table) {
|
|
pr_err("%s: could not kzalloc frequency table\n", __func__);
|
|
return;
|
|
}
|
|
|
|
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
|
|
if (!(prcm->flags & cpu_mask))
|
|
continue;
|
|
if (prcm->xtal_speed != sclk->rate)
|
|
continue;
|
|
|
|
/* don't put bypass rates in table */
|
|
if (prcm->dpll_speed == prcm->xtal_speed)
|
|
continue;
|
|
|
|
freq_table[i].index = i;
|
|
freq_table[i].frequency = prcm->mpu_speed / 1000;
|
|
i++;
|
|
}
|
|
|
|
freq_table[i].index = i;
|
|
freq_table[i].frequency = CPUFREQ_TABLE_END;
|
|
|
|
*table = &freq_table[0];
|
|
}
|
|
|
|
void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
|
|
{
|
|
if (!cpu_is_omap24xx())
|
|
return;
|
|
|
|
kfree(freq_table);
|
|
}
|
|
|
|
#endif
|