Remove the global 'dclk' variable, instead replacing it with a variable local to the dpllcore clock type C file. This removes some of the special-case code surrounding the OMAP2xxx clock init. This patch is a prerequisite for the removal of the omap_prcm_restart() code from arch/arm/mach-omap2/prcm.c. It also cleans up some special-case OMAP2xxx clock code in the process. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
170 lines
4.6 KiB
C
170 lines
4.6 KiB
C
/*
|
|
* OMAP2xxx DVFS virtual clock functions
|
|
*
|
|
* Copyright (C) 2005-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2010 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
|
|
* Gordon McNutt and RidgeRun, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* XXX Some of this code should be replaceable by the upcoming OPP layer
|
|
* code. However, some notion of "rate set" is probably still necessary
|
|
* for OMAP2xxx at least. Rate sets should be generalized so they can be
|
|
* used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff
|
|
* has in the past expressed a preference to use rate sets for OPP changes,
|
|
* rather than dynamically recalculating the clock tree, so if someone wants
|
|
* this badly enough to write the code to handle it, we should support it
|
|
* as an option.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../plat-omap/sram.h"
|
|
|
|
#include "soc.h"
|
|
#include "clock.h"
|
|
#include "clock2xxx.h"
|
|
#include "opp2xxx.h"
|
|
#include "cm2xxx_3xxx.h"
|
|
#include "cm-regbits-24xx.h"
|
|
#include "sdrc.h"
|
|
|
|
const struct prcm_config *curr_prcm_set;
|
|
const struct prcm_config *rate_table;
|
|
|
|
/**
|
|
* omap2_table_mpu_recalc - just return the MPU speed
|
|
* @clk: virt_prcm_set struct clk
|
|
*
|
|
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
|
|
*/
|
|
unsigned long omap2_table_mpu_recalc(struct clk *clk)
|
|
{
|
|
return curr_prcm_set->mpu_speed;
|
|
}
|
|
|
|
/*
|
|
* Look for a rate equal or less than the target rate given a configuration set.
|
|
*
|
|
* What's not entirely clear is "which" field represents the key field.
|
|
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
|
|
* just uses the ARM rates.
|
|
*/
|
|
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
const struct prcm_config *ptr;
|
|
long highest_rate, sys_clk_rate;
|
|
|
|
highest_rate = -EINVAL;
|
|
sys_clk_rate = __clk_get_rate(sclk);
|
|
|
|
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
|
|
if (!(ptr->flags & cpu_mask))
|
|
continue;
|
|
if (ptr->xtal_speed != sys_clk_rate)
|
|
continue;
|
|
|
|
highest_rate = ptr->mpu_speed;
|
|
|
|
/* Can check only after xtal frequency check */
|
|
if (ptr->mpu_speed <= rate)
|
|
break;
|
|
}
|
|
return highest_rate;
|
|
}
|
|
|
|
/* Sets basic clocks based on the specified rate */
|
|
int omap2_select_table_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
u32 cur_rate, done_rate, bypass = 0, tmp;
|
|
const struct prcm_config *prcm;
|
|
unsigned long found_speed = 0;
|
|
unsigned long flags;
|
|
long sys_clk_rate;
|
|
|
|
sys_clk_rate = __clk_get_rate(sclk);
|
|
|
|
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
|
|
if (!(prcm->flags & cpu_mask))
|
|
continue;
|
|
|
|
if (prcm->xtal_speed != sys_clk_rate)
|
|
continue;
|
|
|
|
if (prcm->mpu_speed <= rate) {
|
|
found_speed = prcm->mpu_speed;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found_speed) {
|
|
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
|
|
rate / 1000000);
|
|
return -EINVAL;
|
|
}
|
|
|
|
curr_prcm_set = prcm;
|
|
cur_rate = omap2xxx_clk_get_core_rate();
|
|
|
|
if (prcm->dpll_speed == cur_rate / 2) {
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
|
|
} else if (prcm->dpll_speed == cur_rate * 2) {
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
|
} else if (prcm->dpll_speed != cur_rate) {
|
|
local_irq_save(flags);
|
|
|
|
if (prcm->dpll_speed == prcm->xtal_speed)
|
|
bypass = 1;
|
|
|
|
if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
|
|
CORE_CLK_SRC_DPLL_X2)
|
|
done_rate = CORE_CLK_SRC_DPLL_X2;
|
|
else
|
|
done_rate = CORE_CLK_SRC_DPLL;
|
|
|
|
/* MPU divider */
|
|
omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
|
|
|
|
/* dsp + iva1 div(2420), iva2.1(2430) */
|
|
omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
|
|
OMAP24XX_DSP_MOD, CM_CLKSEL);
|
|
|
|
omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
|
|
|
|
/* Major subsystem dividers */
|
|
tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
|
|
omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
|
|
CM_CLKSEL1);
|
|
|
|
if (cpu_is_omap2430())
|
|
omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
|
|
OMAP2430_MDM_MOD, CM_CLKSEL);
|
|
|
|
/* x2 to enter omap2xxx_sdrc_init_params() */
|
|
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
|
|
|
|
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
|
|
bypass);
|
|
|
|
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
|
|
omap2xxx_sdrc_reprogram(done_rate, 0);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|