linux/drivers/iio/gyro/bmg160_core.c
Adriana Reus 7d0ead5c3f iio: Reconcile operation order between iio_register/unregister and pm functions
At probe, runtime pm should be setup before registering the sysfs interface so
that all the power attributes are accurate and functional when registering.
Also, when removing the device we should unregister first to make sure
that the interfaces that may result in wakeups are no longer available.

Fix this behaviour for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553, rpr0521.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-08 15:36:53 +00:00

1203 lines
28 KiB
C

/*
* BMG160 Gyro Sensor driver
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/gpio/consumer.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/events.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/regmap.h>
#include "bmg160.h"
#define BMG160_IRQ_NAME "bmg160_event"
#define BMG160_GPIO_NAME "gpio_int"
#define BMG160_REG_CHIP_ID 0x00
#define BMG160_CHIP_ID_VAL 0x0F
#define BMG160_REG_PMU_LPW 0x11
#define BMG160_MODE_NORMAL 0x00
#define BMG160_MODE_DEEP_SUSPEND 0x20
#define BMG160_MODE_SUSPEND 0x80
#define BMG160_REG_RANGE 0x0F
#define BMG160_RANGE_2000DPS 0
#define BMG160_RANGE_1000DPS 1
#define BMG160_RANGE_500DPS 2
#define BMG160_RANGE_250DPS 3
#define BMG160_RANGE_125DPS 4
#define BMG160_REG_PMU_BW 0x10
#define BMG160_NO_FILTER 0
#define BMG160_DEF_BW 100
#define BMG160_REG_INT_MAP_0 0x17
#define BMG160_INT_MAP_0_BIT_ANY BIT(1)
#define BMG160_REG_INT_MAP_1 0x18
#define BMG160_INT_MAP_1_BIT_NEW_DATA BIT(0)
#define BMG160_REG_INT_RST_LATCH 0x21
#define BMG160_INT_MODE_LATCH_RESET 0x80
#define BMG160_INT_MODE_LATCH_INT 0x0F
#define BMG160_INT_MODE_NON_LATCH_INT 0x00
#define BMG160_REG_INT_EN_0 0x15
#define BMG160_DATA_ENABLE_INT BIT(7)
#define BMG160_REG_INT_EN_1 0x16
#define BMG160_INT1_BIT_OD BIT(1)
#define BMG160_REG_XOUT_L 0x02
#define BMG160_AXIS_TO_REG(axis) (BMG160_REG_XOUT_L + (axis * 2))
#define BMG160_REG_SLOPE_THRES 0x1B
#define BMG160_SLOPE_THRES_MASK 0x0F
#define BMG160_REG_MOTION_INTR 0x1C
#define BMG160_INT_MOTION_X BIT(0)
#define BMG160_INT_MOTION_Y BIT(1)
#define BMG160_INT_MOTION_Z BIT(2)
#define BMG160_ANY_DUR_MASK 0x30
#define BMG160_ANY_DUR_SHIFT 4
#define BMG160_REG_INT_STATUS_2 0x0B
#define BMG160_ANY_MOTION_MASK 0x07
#define BMG160_ANY_MOTION_BIT_X BIT(0)
#define BMG160_ANY_MOTION_BIT_Y BIT(1)
#define BMG160_ANY_MOTION_BIT_Z BIT(2)
#define BMG160_REG_TEMP 0x08
#define BMG160_TEMP_CENTER_VAL 23
#define BMG160_MAX_STARTUP_TIME_MS 80
#define BMG160_AUTO_SUSPEND_DELAY_MS 2000
struct bmg160_data {
struct device *dev;
struct regmap *regmap;
struct iio_trigger *dready_trig;
struct iio_trigger *motion_trig;
struct mutex mutex;
s16 buffer[8];
u8 bw_bits;
u32 dps_range;
int ev_enable_state;
int slope_thres;
bool dready_trigger_on;
bool motion_trigger_on;
int irq;
};
enum bmg160_axis {
AXIS_X,
AXIS_Y,
AXIS_Z,
};
static const struct {
int val;
int bw_bits;
} bmg160_samp_freq_table[] = { {100, 0x07},
{200, 0x06},
{400, 0x03},
{1000, 0x02},
{2000, 0x01} };
static const struct {
int scale;
int dps_range;
} bmg160_scale_table[] = { { 1065, BMG160_RANGE_2000DPS},
{ 532, BMG160_RANGE_1000DPS},
{ 266, BMG160_RANGE_500DPS},
{ 133, BMG160_RANGE_250DPS},
{ 66, BMG160_RANGE_125DPS} };
static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
{
int ret;
ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
if (ret < 0) {
dev_err(data->dev, "Error writing reg_pmu_lpw\n");
return ret;
}
return 0;
}
static int bmg160_convert_freq_to_bit(int val)
{
int i;
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].val == val)
return bmg160_samp_freq_table[i].bw_bits;
}
return -EINVAL;
}
static int bmg160_set_bw(struct bmg160_data *data, int val)
{
int ret;
int bw_bits;
bw_bits = bmg160_convert_freq_to_bit(val);
if (bw_bits < 0)
return bw_bits;
ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
if (ret < 0) {
dev_err(data->dev, "Error writing reg_pmu_bw\n");
return ret;
}
data->bw_bits = bw_bits;
return 0;
}
static int bmg160_chip_init(struct bmg160_data *data)
{
int ret;
unsigned int val;
ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(data->dev, "Error reading reg_chip_id\n");
return ret;
}
dev_dbg(data->dev, "Chip Id %x\n", val);
if (val != BMG160_CHIP_ID_VAL) {
dev_err(data->dev, "invalid chip %x\n", val);
return -ENODEV;
}
ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
if (ret < 0)
return ret;
/* Wait upto 500 ms to be ready after changing mode */
usleep_range(500, 1000);
/* Set Bandwidth */
ret = bmg160_set_bw(data, BMG160_DEF_BW);
if (ret < 0)
return ret;
/* Set Default Range */
ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
if (ret < 0) {
dev_err(data->dev, "Error writing reg_range\n");
return ret;
}
data->dps_range = BMG160_RANGE_500DPS;
ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
if (ret < 0) {
dev_err(data->dev, "Error reading reg_slope_thres\n");
return ret;
}
data->slope_thres = val;
/* Set default interrupt mode */
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
BMG160_INT1_BIT_OD, 0);
if (ret < 0) {
dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
return ret;
}
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_motion_intr\n");
return ret;
}
return 0;
}
static int bmg160_set_power_state(struct bmg160_data *data, bool on)
{
#ifdef CONFIG_PM
int ret;
if (on)
ret = pm_runtime_get_sync(data->dev);
else {
pm_runtime_mark_last_busy(data->dev);
ret = pm_runtime_put_autosuspend(data->dev);
}
if (ret < 0) {
dev_err(data->dev,
"Failed: bmg160_set_power_state for %d\n", on);
if (on)
pm_runtime_put_noidle(data->dev);
return ret;
}
#endif
return 0;
}
static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
bool status)
{
int ret;
/* Enable/Disable INT_MAP0 mapping */
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0,
BMG160_INT_MAP_0_BIT_ANY,
(status ? BMG160_INT_MAP_0_BIT_ANY : 0));
if (ret < 0) {
dev_err(data->dev, "Error updating bits reg_int_map0\n");
return ret;
}
/* Enable/Disable slope interrupts */
if (status) {
/* Update slope thres */
ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
data->slope_thres);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_slope_thres\n");
return ret;
}
ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR,
BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
BMG160_INT_MOTION_Z);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_motion_intr\n");
return ret;
}
/*
* New data interrupt is always non-latched,
* which will have higher priority, so no need
* to set latched mode, we will be flooded anyway with INTR
*/
if (!data->dready_trigger_on) {
ret = regmap_write(data->regmap,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
}
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
} else {
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
}
if (ret < 0) {
dev_err(data->dev, "Error writing reg_int_en0\n");
return ret;
}
return 0;
}
static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
bool status)
{
int ret;
/* Enable/Disable INT_MAP1 mapping */
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1,
BMG160_INT_MAP_1_BIT_NEW_DATA,
(status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
if (ret < 0) {
dev_err(data->dev, "Error updating bits in reg_int_map1\n");
return ret;
}
if (status) {
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_NON_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
} else {
/* Restore interrupt mode */
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
}
if (ret < 0) {
dev_err(data->dev, "Error writing reg_int_en0\n");
return ret;
}
return 0;
}
static int bmg160_get_bw(struct bmg160_data *data, int *val)
{
int i;
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == data->bw_bits) {
*val = bmg160_samp_freq_table[i].val;
return IIO_VAL_INT;
}
}
return -EINVAL;
}
static int bmg160_set_scale(struct bmg160_data *data, int val)
{
int ret, i;
for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
if (bmg160_scale_table[i].scale == val) {
ret = regmap_write(data->regmap, BMG160_REG_RANGE,
bmg160_scale_table[i].dps_range);
if (ret < 0) {
dev_err(data->dev,
"Error writing reg_range\n");
return ret;
}
data->dps_range = bmg160_scale_table[i].dps_range;
return 0;
}
}
return -EINVAL;
}
static int bmg160_get_temp(struct bmg160_data *data, int *val)
{
int ret;
unsigned int raw_val;
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
if (ret < 0) {
dev_err(data->dev, "Error reading reg_temp\n");
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
*val = sign_extend32(raw_val, 7);
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
return IIO_VAL_INT;
}
static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
{
int ret;
unsigned int raw_val;
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
2);
if (ret < 0) {
dev_err(data->dev, "Error reading axis %d\n", axis);
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
*val = sign_extend32(raw_val, 15);
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
return IIO_VAL_INT;
}
static int bmg160_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_TEMP:
return bmg160_get_temp(data, val);
case IIO_ANGL_VEL:
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
else
return bmg160_get_axis(data, chan->scan_index,
val);
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
*val = BMG160_TEMP_CENTER_VAL;
return IIO_VAL_INT;
} else
return -EINVAL;
case IIO_CHAN_INFO_SCALE:
*val = 0;
switch (chan->type) {
case IIO_TEMP:
*val2 = 500000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ANGL_VEL:
{
int i;
for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
if (bmg160_scale_table[i].dps_range ==
data->dps_range) {
*val2 = bmg160_scale_table[i].scale;
return IIO_VAL_INT_PLUS_MICRO;
}
}
return -EINVAL;
}
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SAMP_FREQ:
*val2 = 0;
mutex_lock(&data->mutex);
ret = bmg160_get_bw(data, val);
mutex_unlock(&data->mutex);
return ret;
default:
return -EINVAL;
}
}
static int bmg160_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
mutex_lock(&data->mutex);
/*
* Section 4.2 of spec
* In suspend mode, the only supported operations are reading
* registers as well as writing to the (0x14) softreset
* register. Since we will be in suspend mode by default, change
* mode to power on for other writes.
*/
ret = bmg160_set_power_state(data, true);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = bmg160_set_bw(data, val);
if (ret < 0) {
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
case IIO_CHAN_INFO_SCALE:
if (val)
return -EINVAL;
mutex_lock(&data->mutex);
/* Refer to comments above for the suspend mode ops */
ret = bmg160_set_power_state(data, true);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = bmg160_set_scale(data, val2);
if (ret < 0) {
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
default:
return -EINVAL;
}
return -EINVAL;
}
static int bmg160_read_event(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info,
int *val, int *val2)
{
struct bmg160_data *data = iio_priv(indio_dev);
*val2 = 0;
switch (info) {
case IIO_EV_INFO_VALUE:
*val = data->slope_thres & BMG160_SLOPE_THRES_MASK;
break;
default:
return -EINVAL;
}
return IIO_VAL_INT;
}
static int bmg160_write_event(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info,
int val, int val2)
{
struct bmg160_data *data = iio_priv(indio_dev);
switch (info) {
case IIO_EV_INFO_VALUE:
if (data->ev_enable_state)
return -EBUSY;
data->slope_thres &= ~BMG160_SLOPE_THRES_MASK;
data->slope_thres |= (val & BMG160_SLOPE_THRES_MASK);
break;
default:
return -EINVAL;
}
return 0;
}
static int bmg160_read_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir)
{
struct bmg160_data *data = iio_priv(indio_dev);
return data->ev_enable_state;
}
static int bmg160_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
int state)
{
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
if (state && data->ev_enable_state)
return 0;
mutex_lock(&data->mutex);
if (!state && data->motion_trigger_on) {
data->ev_enable_state = 0;
mutex_unlock(&data->mutex);
return 0;
}
/*
* We will expect the enable and disable to do operation in
* in reverse order. This will happen here anyway as our
* resume operation uses sync mode runtime pm calls, the
* suspend operation will be delayed by autosuspend delay
* So the disable operation will still happen in reverse of
* enable operation. When runtime pm is disabled the mode
* is always on so sequence doesn't matter
*/
ret = bmg160_set_power_state(data, state);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = bmg160_setup_any_motion_interrupt(data, state);
if (ret < 0) {
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
data->ev_enable_state = state;
mutex_unlock(&data->mutex);
return 0;
}
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 400 1000 2000");
static IIO_CONST_ATTR(in_anglvel_scale_available,
"0.001065 0.000532 0.000266 0.000133 0.000066");
static struct attribute *bmg160_attributes[] = {
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group bmg160_attrs_group = {
.attrs = bmg160_attributes,
};
static const struct iio_event_spec bmg160_event = {
.type = IIO_EV_TYPE_ROC,
.dir = IIO_EV_DIR_EITHER,
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE)
};
#define BMG160_CHANNEL(_axis) { \
.type = IIO_ANGL_VEL, \
.modified = 1, \
.channel2 = IIO_MOD_##_axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = AXIS_##_axis, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
}, \
.event_spec = &bmg160_event, \
.num_event_specs = 1 \
}
static const struct iio_chan_spec bmg160_channels[] = {
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.scan_index = -1,
},
BMG160_CHANNEL(X),
BMG160_CHANNEL(Y),
BMG160_CHANNEL(Z),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
static const struct iio_info bmg160_info = {
.attrs = &bmg160_attrs_group,
.read_raw = bmg160_read_raw,
.write_raw = bmg160_write_raw,
.read_event_value = bmg160_read_event,
.write_event_value = bmg160_write_event,
.write_event_config = bmg160_write_event_config,
.read_event_config = bmg160_read_event_config,
.driver_module = THIS_MODULE,
};
static irqreturn_t bmg160_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmg160_data *data = iio_priv(indio_dev);
int bit, ret, i = 0;
unsigned int val;
mutex_lock(&data->mutex);
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(bit),
&val, 2);
if (ret < 0) {
mutex_unlock(&data->mutex);
goto err;
}
data->buffer[i++] = ret;
}
mutex_unlock(&data->mutex);
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
pf->timestamp);
err:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int bmg160_trig_try_reen(struct iio_trigger *trig)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
/* new data interrupts don't need ack */
if (data->dready_trigger_on)
return 0;
/* Set latched mode interrupt and clear any latched interrupt */
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(data->dev, "Error writing reg_rst_latch\n");
return ret;
}
return 0;
}
static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
mutex_lock(&data->mutex);
if (!state && data->ev_enable_state && data->motion_trigger_on) {
data->motion_trigger_on = false;
mutex_unlock(&data->mutex);
return 0;
}
/*
* Refer to comment in bmg160_write_event_config for
* enable/disable operation order
*/
ret = bmg160_set_power_state(data, state);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
if (data->motion_trig == trig)
ret = bmg160_setup_any_motion_interrupt(data, state);
else
ret = bmg160_setup_new_data_interrupt(data, state);
if (ret < 0) {
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
if (data->motion_trig == trig)
data->motion_trigger_on = state;
else
data->dready_trigger_on = state;
mutex_unlock(&data->mutex);
return 0;
}
static const struct iio_trigger_ops bmg160_trigger_ops = {
.set_trigger_state = bmg160_data_rdy_trigger_set_state,
.try_reenable = bmg160_trig_try_reen,
.owner = THIS_MODULE,
};
static irqreturn_t bmg160_event_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
int dir;
unsigned int val;
ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
if (ret < 0) {
dev_err(data->dev, "Error reading reg_int_status2\n");
goto ack_intr_status;
}
if (val & 0x08)
dir = IIO_EV_DIR_RISING;
else
dir = IIO_EV_DIR_FALLING;
if (val & BMG160_ANY_MOTION_BIT_X)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_X,
IIO_EV_TYPE_ROC,
dir),
iio_get_time_ns());
if (val & BMG160_ANY_MOTION_BIT_Y)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_Y,
IIO_EV_TYPE_ROC,
dir),
iio_get_time_ns());
if (val & BMG160_ANY_MOTION_BIT_Z)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_Z,
IIO_EV_TYPE_ROC,
dir),
iio_get_time_ns());
ack_intr_status:
if (!data->dready_trigger_on) {
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0)
dev_err(data->dev,
"Error writing reg_rst_latch\n");
}
return IRQ_HANDLED;
}
static irqreturn_t bmg160_data_rdy_trig_poll(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct bmg160_data *data = iio_priv(indio_dev);
if (data->dready_trigger_on)
iio_trigger_poll(data->dready_trig);
else if (data->motion_trigger_on)
iio_trigger_poll(data->motion_trig);
if (data->ev_enable_state)
return IRQ_WAKE_THREAD;
else
return IRQ_HANDLED;
}
static int bmg160_buffer_preenable(struct iio_dev *indio_dev)
{
struct bmg160_data *data = iio_priv(indio_dev);
return bmg160_set_power_state(data, true);
}
static int bmg160_buffer_postdisable(struct iio_dev *indio_dev)
{
struct bmg160_data *data = iio_priv(indio_dev);
return bmg160_set_power_state(data, false);
}
static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
.preenable = bmg160_buffer_preenable,
.postenable = iio_triggered_buffer_postenable,
.predisable = iio_triggered_buffer_predisable,
.postdisable = bmg160_buffer_postdisable,
};
static int bmg160_gpio_probe(struct bmg160_data *data)
{
struct device *dev;
struct gpio_desc *gpio;
dev = data->dev;
/* data ready gpio interrupt pin */
gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
if (IS_ERR(gpio)) {
dev_err(dev, "acpi gpio get index failed\n");
return PTR_ERR(gpio);
}
data->irq = gpiod_to_irq(gpio);
dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio),
data->irq);
return 0;
}
static const char *bmg160_match_acpi_device(struct device *dev)
{
const struct acpi_device_id *id;
id = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!id)
return NULL;
return dev_name(dev);
}
int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
const char *name)
{
struct bmg160_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
dev_set_drvdata(dev, indio_dev);
data->dev = dev;
data->irq = irq;
data->regmap = regmap;
ret = bmg160_chip_init(data);
if (ret < 0)
return ret;
mutex_init(&data->mutex);
if (ACPI_HANDLE(dev))
name = bmg160_match_acpi_device(dev);
indio_dev->dev.parent = dev;
indio_dev->channels = bmg160_channels;
indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmg160_info;
if (data->irq <= 0)
bmg160_gpio_probe(data);
if (data->irq > 0) {
ret = devm_request_threaded_irq(dev,
data->irq,
bmg160_data_rdy_trig_poll,
bmg160_event_handler,
IRQF_TRIGGER_RISING,
BMG160_IRQ_NAME,
indio_dev);
if (ret)
return ret;
data->dready_trig = devm_iio_trigger_alloc(dev,
"%s-dev%d",
indio_dev->name,
indio_dev->id);
if (!data->dready_trig)
return -ENOMEM;
data->motion_trig = devm_iio_trigger_alloc(dev,
"%s-any-motion-dev%d",
indio_dev->name,
indio_dev->id);
if (!data->motion_trig)
return -ENOMEM;
data->dready_trig->dev.parent = dev;
data->dready_trig->ops = &bmg160_trigger_ops;
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
ret = iio_trigger_register(data->dready_trig);
if (ret)
return ret;
data->motion_trig->dev.parent = dev;
data->motion_trig->ops = &bmg160_trigger_ops;
iio_trigger_set_drvdata(data->motion_trig, indio_dev);
ret = iio_trigger_register(data->motion_trig);
if (ret) {
data->motion_trig = NULL;
goto err_trigger_unregister;
}
}
ret = iio_triggered_buffer_setup(indio_dev,
iio_pollfunc_store_time,
bmg160_trigger_handler,
&bmg160_buffer_setup_ops);
if (ret < 0) {
dev_err(dev,
"iio triggered buffer setup failed\n");
goto err_trigger_unregister;
}
ret = pm_runtime_set_active(dev);
if (ret)
goto err_buffer_cleanup;
pm_runtime_enable(dev);
pm_runtime_set_autosuspend_delay(dev,
BMG160_AUTO_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(dev);
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
goto err_buffer_cleanup;
}
return 0;
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
if (data->dready_trig)
iio_trigger_unregister(data->dready_trig);
if (data->motion_trig)
iio_trigger_unregister(data->motion_trig);
return ret;
}
EXPORT_SYMBOL_GPL(bmg160_core_probe);
void bmg160_core_remove(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
pm_runtime_put_noidle(dev);
iio_triggered_buffer_cleanup(indio_dev);
if (data->dready_trig) {
iio_trigger_unregister(data->dready_trig);
iio_trigger_unregister(data->motion_trig);
}
mutex_lock(&data->mutex);
bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
mutex_unlock(&data->mutex);
}
EXPORT_SYMBOL_GPL(bmg160_core_remove);
#ifdef CONFIG_PM_SLEEP
static int bmg160_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
bmg160_set_mode(data, BMG160_MODE_SUSPEND);
mutex_unlock(&data->mutex);
return 0;
}
static int bmg160_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
if (data->dready_trigger_on || data->motion_trigger_on ||
data->ev_enable_state)
bmg160_set_mode(data, BMG160_MODE_NORMAL);
mutex_unlock(&data->mutex);
return 0;
}
#endif
#ifdef CONFIG_PM
static int bmg160_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
if (ret < 0) {
dev_err(data->dev, "set mode failed\n");
return -EAGAIN;
}
return 0;
}
static int bmg160_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
if (ret < 0)
return ret;
msleep_interruptible(BMG160_MAX_STARTUP_TIME_MS);
return 0;
}
#endif
const struct dev_pm_ops bmg160_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
bmg160_runtime_resume, NULL)
};
EXPORT_SYMBOL_GPL(bmg160_pm_ops);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("BMG160 Gyro driver");