Most PCI implementations use the standard PCI swizzle function, which handles the well defined behaviour of PCI-to-PCI bridges which can be found on cards (eg, four port ethernet cards.) Rather than having almost every platform specify the standard swizzle function, make this the default when no swizzle function is supplied. Therefore, a swizzle function only needs to be provided when there is something exceptional which needs to be handled. This gets rid of the swizzle initializer from 47 files, and leaves us with just two platforms specifying a swizzle function: ARM Integrator and Chalice CATS. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
178 lines
4.8 KiB
C
178 lines
4.8 KiB
C
/*
|
|
* arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
|
|
*
|
|
* Marvell Orion-VoIP FXO Reference Design Setup
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/ethtool.h>
|
|
#include <net/dsa.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
/*****************************************************************************
|
|
* RD-88F5181L FXO Info
|
|
****************************************************************************/
|
|
/*
|
|
* 8M NOR flash Device bus boot chip select
|
|
*/
|
|
#define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000
|
|
#define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M
|
|
|
|
|
|
/*****************************************************************************
|
|
* 8M NOR Flash on Device bus Boot chip select
|
|
****************************************************************************/
|
|
static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
|
|
.width = 1,
|
|
};
|
|
|
|
static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = RD88F5181L_FXO_NOR_BOOT_BASE,
|
|
.end = RD88F5181L_FXO_NOR_BOOT_BASE +
|
|
RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &rd88f5181l_fxo_nor_boot_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &rd88f5181l_fxo_nor_boot_flash_resource,
|
|
};
|
|
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
|
|
MPP0_GPIO, /* LED1 CardBus LED (front panel) */
|
|
MPP1_GPIO, /* PCI_intA */
|
|
MPP2_GPIO, /* Hard Reset / Factory Init*/
|
|
MPP3_GPIO, /* FXS or DAA select */
|
|
MPP4_GPIO, /* LED6 - phone LED (front panel) */
|
|
MPP5_GPIO, /* LED5 - phone LED (front panel) */
|
|
MPP6_PCI_CLK, /* CPU PCI refclk */
|
|
MPP7_PCI_CLK, /* PCI/PCIe refclk */
|
|
MPP8_GPIO, /* CardBus reset */
|
|
MPP9_GPIO, /* GE_RXERR */
|
|
MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */
|
|
MPP11_GPIO, /* Lifeline control */
|
|
MPP12_GIGE, /* GE_TXD[4] */
|
|
MPP13_GIGE, /* GE_TXD[5] */
|
|
MPP14_GIGE, /* GE_TXD[6] */
|
|
MPP15_GIGE, /* GE_TXD[7] */
|
|
MPP16_GIGE, /* GE_RXD[4] */
|
|
MPP17_GIGE, /* GE_RXD[5] */
|
|
MPP18_GIGE, /* GE_RXD[6] */
|
|
MPP19_GIGE, /* GE_RXD[7] */
|
|
0,
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_NONE,
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
};
|
|
|
|
static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
|
|
.port_names[0] = "lan2",
|
|
.port_names[1] = "lan1",
|
|
.port_names[2] = "wan",
|
|
.port_names[3] = "cpu",
|
|
.port_names[5] = "lan4",
|
|
.port_names[7] = "lan3",
|
|
};
|
|
|
|
static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
|
|
.nr_chips = 1,
|
|
.chip = &rd88f5181l_fxo_switch_chip_data,
|
|
};
|
|
|
|
static void __init rd88f5181l_fxo_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
|
|
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
|
|
orion5x_uart0_init();
|
|
|
|
orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
|
|
RD88F5181L_FXO_NOR_BOOT_SIZE);
|
|
platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
|
|
}
|
|
|
|
static int __init
|
|
rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Check for devices with hard-wired IRQs.
|
|
*/
|
|
irq = orion5x_pci_map_irq(dev, slot, pin);
|
|
if (irq != -1)
|
|
return irq;
|
|
|
|
/*
|
|
* Mini-PCI / Cardbus slot.
|
|
*/
|
|
return gpio_to_irq(1);
|
|
}
|
|
|
|
static struct hw_pci rd88f5181l_fxo_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.setup = orion5x_pci_sys_setup,
|
|
.scan = orion5x_pci_sys_scan_bus,
|
|
.map_irq = rd88f5181l_fxo_pci_map_irq,
|
|
};
|
|
|
|
static int __init rd88f5181l_fxo_pci_init(void)
|
|
{
|
|
if (machine_is_rd88f5181l_fxo()) {
|
|
orion5x_pci_set_cardbus_mode();
|
|
pci_common_init(&rd88f5181l_fxo_pci);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(rd88f5181l_fxo_pci_init);
|
|
|
|
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
|
|
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
|
|
.atag_offset = 0x100,
|
|
.init_machine = rd88f5181l_fxo_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.timer = &orion5x_timer,
|
|
.fixup = tag_fixup_mem32,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|