fcf7157ba3
"struct davinci_uart_config" was introduced to specify UART ports brought out or enabled on the board. But none of the boards use it for that purpose and we are not going to add anymore board files, so remove the structure. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split patch to remove davinci_serial_setup_clk() changes.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
229 lines
6.4 KiB
C
229 lines
6.4 KiB
C
/*
|
|
* Neuros Technologies OSD2 board support
|
|
*
|
|
* Modified from original 644X-EVM board support.
|
|
* 2008 (c) Neuros Technology, LLC.
|
|
* 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
|
|
* 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
|
|
*
|
|
* The Neuros OSD 2.0 is the hardware component of the Neuros Open
|
|
* Internet Television Platform. Hardware is very close to TI
|
|
* DM644X-EVM board. It has:
|
|
* DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
|
|
* USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
|
|
* Additionally realtime clock, IR remote control receiver,
|
|
* IR Blaster based on MSP430 (firmware although is different
|
|
* from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
|
|
* with PATA interface, two muxed red-green leds.
|
|
*
|
|
* For more information please refer to
|
|
* http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <linux/platform_data/i2c-davinci.h>
|
|
#include <mach/serial.h>
|
|
#include <mach/mux.h>
|
|
#include <linux/platform_data/mtd-davinci.h>
|
|
#include <linux/platform_data/mmc-davinci.h>
|
|
#include <linux/platform_data/usb-davinci.h>
|
|
|
|
#include "davinci.h"
|
|
|
|
#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
|
|
#define LXT971_PHY_ID 0x001378e2
|
|
#define LXT971_PHY_MASK 0xfffffff0
|
|
|
|
#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18
|
|
#define NTOSD2_MSP430_I2C_ADDR 0x59
|
|
#define NTOSD2_MSP430_IRQ 2
|
|
|
|
/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
|
|
* 2048 blocks in the device, 64 pages per block, 2048 bytes per
|
|
* page.
|
|
*/
|
|
|
|
#define NAND_BLOCK_SIZE SZ_128K
|
|
|
|
static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
|
|
{
|
|
/* UBL (a few copies) plus U-Boot */
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = 15 * NAND_BLOCK_SIZE,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
}, {
|
|
/* U-Boot environment */
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 1 * NAND_BLOCK_SIZE,
|
|
.mask_flags = 0,
|
|
}, {
|
|
/* Kernel */
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
.mask_flags = 0,
|
|
}, {
|
|
/* File System */
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0,
|
|
}
|
|
/* A few blocks at end hold a flash Bad Block Table. */
|
|
};
|
|
|
|
static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
|
|
.parts = davinci_ntosd2_nandflash_partition,
|
|
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
|
|
.ecc_mode = NAND_ECC_HW,
|
|
.bbt_options = NAND_BBT_USE_FLASH,
|
|
};
|
|
|
|
static struct resource davinci_ntosd2_nandflash_resource[] = {
|
|
{
|
|
.start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
|
|
.end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = DM644X_ASYNC_EMIF_CONTROL_BASE,
|
|
.end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device davinci_ntosd2_nandflash_device = {
|
|
.name = "davinci_nand",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &davinci_ntosd2_nandflash_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
|
|
.resource = davinci_ntosd2_nandflash_resource,
|
|
};
|
|
|
|
static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device davinci_fb_device = {
|
|
.name = "davincifb",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &davinci_fb_dma_mask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.num_resources = 0,
|
|
};
|
|
|
|
static struct snd_platform_data dm644x_ntosd2_snd_data;
|
|
|
|
static struct gpio_led ntosd2_leds[] = {
|
|
{ .name = "led1_green", .gpio = GPIO(10), },
|
|
{ .name = "led1_red", .gpio = GPIO(11), },
|
|
{ .name = "led2_green", .gpio = GPIO(12), },
|
|
{ .name = "led2_red", .gpio = GPIO(13), },
|
|
};
|
|
|
|
static struct gpio_led_platform_data ntosd2_leds_data = {
|
|
.num_leds = ARRAY_SIZE(ntosd2_leds),
|
|
.leds = ntosd2_leds,
|
|
};
|
|
|
|
static struct platform_device ntosd2_leds_dev = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ntosd2_leds_data,
|
|
},
|
|
};
|
|
|
|
|
|
static struct platform_device *davinci_ntosd2_devices[] __initdata = {
|
|
&davinci_fb_device,
|
|
&ntosd2_leds_dev,
|
|
};
|
|
|
|
static void __init davinci_ntosd2_map_io(void)
|
|
{
|
|
dm644x_init();
|
|
}
|
|
|
|
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
|
|
.wires = 4,
|
|
};
|
|
|
|
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
|
|
|
|
#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
|
|
|
|
static __init void davinci_ntosd2_init(void)
|
|
{
|
|
struct clk *aemif_clk;
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
|
|
aemif_clk = clk_get(NULL, "aemif");
|
|
clk_prepare_enable(aemif_clk);
|
|
|
|
if (HAS_ATA) {
|
|
if (HAS_NAND)
|
|
pr_warning("WARNING: both IDE and Flash are "
|
|
"enabled, but they share AEMIF pins.\n"
|
|
"\tDisable IDE for NAND/NOR support.\n");
|
|
davinci_init_ide();
|
|
} else if (HAS_NAND) {
|
|
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
|
|
davinci_cfg_reg(DM644X_ATAEN_DISABLE);
|
|
|
|
/* only one device will be jumpered and detected */
|
|
if (HAS_NAND)
|
|
platform_device_register(
|
|
&davinci_ntosd2_nandflash_device);
|
|
}
|
|
|
|
platform_add_devices(davinci_ntosd2_devices,
|
|
ARRAY_SIZE(davinci_ntosd2_devices));
|
|
|
|
davinci_serial_init(dm644x_serial_device);
|
|
dm644x_init_asp(&dm644x_ntosd2_snd_data);
|
|
|
|
soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
|
|
|
|
davinci_setup_usb(1000, 8);
|
|
/*
|
|
* Mux the pins to be GPIOs, VLYNQEN is already done at startup.
|
|
* The AEAWx are five new AEAW pins that can be muxed by separately.
|
|
* They are a bitmask for GPIO management. According TI
|
|
* documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
|
|
* gpio(10,11,12,13) for leds any combination of bits works except
|
|
* four last. So we are to reset all five.
|
|
*/
|
|
davinci_cfg_reg(DM644X_AEAW0);
|
|
davinci_cfg_reg(DM644X_AEAW1);
|
|
davinci_cfg_reg(DM644X_AEAW2);
|
|
davinci_cfg_reg(DM644X_AEAW3);
|
|
davinci_cfg_reg(DM644X_AEAW4);
|
|
|
|
davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
|
|
}
|
|
|
|
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
|
|
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
|
|
.atag_offset = 0x100,
|
|
.map_io = davinci_ntosd2_map_io,
|
|
.init_irq = davinci_irq_init,
|
|
.init_time = davinci_timer_init,
|
|
.init_machine = davinci_ntosd2_init,
|
|
.init_late = davinci_init_late,
|
|
.dma_zone_size = SZ_128M,
|
|
.restart = davinci_restart,
|
|
MACHINE_END
|