We should allow quorum errors to be send upwards
such that caller can retry while reading bucket
encryption/policy configs when server is starting
up, this allows distributed setups to load the
configuration properly.
Current code didn't facilitate this and would have
never loaded the actual configs during rolling,
server restarts.
This PR allows setting a "hard" or "fifo" quota
restriction at the bucket level. Buckets that
have reached the FIFO quota configured, will
automatically be cleaned up in FIFO manner until
bucket usage drops to configured quota.
If a bucket is configured with a "hard" quota
ceiling, all further writes are disallowed.
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
this commit avoids lots of tiny allocations, repeated
channel creates which are performed when filtering
the incoming events, unescaping a key just for matching.
also remove deprecated code which is not needed
anymore, avoids unexpected data structure transformations
from the map to slice.
Instead of GlobalContext use a local context for tests.
Most notably this allows stuff created to be shut down
when tests using it is done. After PR #9345 9331 CI is
often running out of memory/time.
- Implement a graph algorithm to test network bandwidth from every
node to every other node
- Saturate any network bandwidth adaptively, accounting for slow
and fast network capacity
- Implement parallel drive OBD tests
- Implement a paging mechanism for OBD test to provide periodic updates to client
- Implement Sys, Process, Host, Mem OBD Infos
- total number of S3 API calls per server
- maximum wait duration for any S3 API call
This implementation is primarily meant for situations
where HDDs are not capable enough to handle the incoming
workload and there is no way to throttle the client.
This feature allows MinIO server to throttle itself
such that we do not overwhelm the HDDs.
- acquire since leader lock for all background operations
- healing, crawling and applying lifecycle policies.
- simplify lifecyle to avoid network calls, which was a
bug in implementation - we should hold a leader and
do everything from there, we have access to entire
name space.
- make listing, walking not interfere by slowing itself
down like the crawler.
- effectively use global context everywhere to ensure
proper shutdown, in cache, lifecycle, healing
- don't read `format.json` for prometheus metrics in
StorageInfo() call.
The logging subsystem was initialized under init() method in
both gateway-main.go and server-main.go which are part of
same package. This created two logging targets and hence
errors were logged twice. This PR moves the init() method
to common-main.go
- pkg/bucket/encryption provides support for handling bucket
encryption configuration
- changes under cmd/ provide support for AES256 algorithm only
Co-Authored-By: Poorna <poornas@users.noreply.github.com>
Co-authored-by: Harshavardhana <harsha@minio.io>
For 'snapshot' type profiles, record a 'before' profile that can be used
as `go tool pprof -base=before ...` to compare before and after.
"Before" profiles are included in the zipped package.
[`runtime.MemProfileRate`](https://golang.org/pkg/runtime/#pkg-variables)
should not be updated while the application is running, so we set it at startup.
Co-authored-by: Harshavardhana <harsha@minio.io>
instead perform a liveness check call to
verify if server is online and print relevant
errors.
Also introduce a StorageErr string error type
instead of errors.New() deprecate usage of
VerifyFileError, DeleteFileError for gob,
change in datastructure also requires bump in
storage REST version to v13.
Fixes#8811
When formatting a set validate if a host failure will likely lead to data loss.
While we don't know what config will be set in the future
evaluate to our best knowledge, assuming default settings.
Use reference format to initialize lockers
during startup, also handle `nil` for NetLocker
in dsync and remove *errorLocker* implementation
Add further tuning parameters such as
- DialTimeout is now 15 seconds from 30 seconds
- KeepAliveTimeout is not 20 seconds, 5 seconds
more than default 15 seconds
- ResponseHeaderTimeout to 10 seconds
- ExpectContinueTimeout is reduced to 3 seconds
- DualStack is enabled by default remove setting
it to `true`
- Reduce IdleConnTimeout to 30 seconds from
1 minute to avoid idleConn build up
Fixes#8773
This ensures that we can update the
- .minio.sys is updated for accounting/data usage purposes
- .minio.sys is updated to indicate if backend is encrypted
or not.
The approach is that now safe mode is only invoked when
we cannot read the config or under some catastrophic
situations, but not under situations when config entries
are invalid or unreachable. This allows for maximum
availability for MinIO and not fail on our users unlike
most of our historical releases.
Admin data usage info API returns the following
(Only FS & XL, for now)
- Number of buckets
- Number of objects
- The total size of objects
- Objects histogram
- Bucket sizes
Fixes an issue reported by @klauspost and @vadmeste
This PR also allows users to expand their clusters
from single node XL deployment to distributed mode.
- Migrate and save only settings which are enabled
- Rename logger_http to logger_webhook and
logger_http_audit to audit_webhook
- No more pretty printing comments, comment
is a key=value pair now.
- Avoid quotes on values which do not have space in them
- `state="on"` is implicit for all SetConfigKV unless
specified explicitly as `state="off"`
- Disabled IAM users should be disabled always
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR also fixes issues related to
- Add proper newline for `mc admin config get` output
for more than one targets
- Fixes issue of temporary user credentials to have
consistent output
- Fixes a crash when setting a key with empty values
- Fixes a parsing issue with `mc admin config history`
- Fixes gateway ENV handling for etcd server and gateway
This PR fixes issues found in config migration
- StorageClass migration error when rrs is empty
- Plain-text migration of older config
- Do not run in safe mode with incorrect credentials
- Update logger_http documentation for _STATE env
Refer more reported issues at #8434
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
This PR adds code to appropriately handle versioning issues
that come up quite constantly across our API changes. Currently
we were also routing our requests wrong which sort of made it
harder to write a consistent error handling code to appropriately
reject or honor requests.
This PR potentially fixes issues
- old mc is used against new minio release which is incompatible
returns an appropriate for client action.
- any older servers talking to each other, report appropriate error
- incompatible peer servers should report error and reject the calls
with appropriate error
- Supports migrating only when the credential ENVs are set,
so any FS mode deployments which do not have ENVs set will
continue to remain as is.
- Credential ENVs can be rotated using MINIO_ACCESS_KEY_OLD
and MINIO_SECRET_KEY_OLD envs, in such scenarios it allowed
to rotate the encrypted content to a new admin key.
- This PR allows config KVS to be validated properly
without being affected by ENV overrides, rejects
invalid values during set operation
- Expands unit tests and refactors the error handling
for notification targets, returns error instead of
ignoring targets for invalid KVS
- Does all the prep-work for implementing safe-mode
style operation for MinIO server, introduces a new
global variable to toggle safe mode based operations
NOTE: this PR itself doesn't provide safe mode operations
The new auto healing model selects one node always responsible
for auto-healing the whole cluster, erasure set by erasure set.
If that node dies, another node will be elected as a leading
operator to perform healing.
This code also adds a goroutine which checks each 10 minutes
if there are any new unformatted disks and performs its healing
in that case, only the erasure set which has the new disk will
be healed.
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
