minio/pkg/objcache/objcache_test.go
Harshavardhana b363709c11 caching: Optimize memory allocations. (#3405)
This change brings in changes at multiple places

 - Reuse buffers at almost all locations ranging
   from rpc, fs, xl, checksum etc.
 - Change caching behavior to disable itself
   under low memory conditions i.e < 8GB of RAM.
 - Only objects cached are of size 1/10th the size
   of the cache for example if 4GB is the cache size
   the maximum object size which will be cached
   is going to be 400MB. This change is an
   optimization to cache more objects rather
   than few larger objects.
 - If object cache is enabled default GC
   percent has been reduced to 20% in lieu
   with newly found behavior of GC. If the cache
   utilization reaches 75% of the maximum value
   GC percent is reduced to 10% to make GC
   more aggressive.
 - Do not use *bytes.Buffer* due to its growth
   requirements. For every allocation *bytes.Buffer*
   allocates an additional buffer for its internal
   purposes. This is undesirable for us, so
   implemented a new cappedWriter which is capped to a
   desired size, beyond this all writes rejected.

Possible fix for #3403.
2016-12-08 20:35:07 -08:00

286 lines
8.4 KiB
Go

/*
* Minio Cloud Storage, (C) 2016 Minio, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
package objcache
import (
"bytes"
"io"
"io/ioutil"
"testing"
"time"
)
// TestObjectCache tests cases of object cache with expiry.
func TestObjExpiry(t *testing.T) {
// Non exhaustive list of all object cache behavior cases.
testCases := []struct {
expiry time.Duration
cacheSize uint64
err error
closeErr error
}{
{
expiry: 100 * time.Millisecond,
cacheSize: 1024,
err: ErrKeyNotFoundInCache,
closeErr: nil,
},
}
// Test case 1 validates running of GC.
testCase := testCases[0]
cache := New(testCase.cacheSize, testCase.expiry)
cache.OnEviction = func(key string) {}
w, err := cache.Create("test", 1)
if err != nil {
t.Errorf("Test case 1 expected to pass, failed instead %s", err)
}
// Write a byte.
w.Write([]byte("1"))
if err = w.Close(); err != nil {
t.Errorf("Test case 1 expected to pass, failed instead %s", err)
}
// Wait for 500 millisecond.
time.Sleep(500 * time.Millisecond)
// Setting objModTime to the beginning of golang's time.Time to avoid deletion of stale entry.
fakeObjModTime := time.Time{}
_, err = cache.Open("test", fakeObjModTime)
if err != testCase.err {
t.Errorf("Test case 1 expected %s, got instead %s", testCase.err, err)
}
}
// TestObjCache - tests various cases for object cache behavior.
func TestObjCache(t *testing.T) {
// Setting objModTime to the beginning of golang's time.Time to avoid deletion of stale entry.
fakeObjModTime := time.Time{}
// Non exhaustive list of all object cache behavior cases.
testCases := []struct {
expiry time.Duration
cacheSize uint64
err error
closeErr error
}{
// Validate if a key is not found in cache and Open fails.
{
expiry: NoExpiry,
cacheSize: 1024,
err: ErrKeyNotFoundInCache,
},
// Validate if cache indicates that it is full and Create fails.
{
expiry: NoExpiry,
cacheSize: 1,
err: ErrCacheFull,
},
// Validate if Create succeeds but Close fails to write to buffer.
{
expiry: NoExpiry,
cacheSize: 2,
closeErr: io.ErrShortBuffer,
},
// Validate that Create and Close succeed, making sure to update the cache.
{
expiry: NoExpiry,
cacheSize: 1024,
},
// Validate that Delete succeeds and Open fails with key not found in cache.
{
expiry: NoExpiry,
cacheSize: 1024,
err: ErrKeyNotFoundInCache,
},
// Validate OnEviction function is called upon entry delete.
{
expiry: NoExpiry,
cacheSize: 1024,
},
// Validate error excess data.
{
expiry: NoExpiry,
cacheSize: 5,
closeErr: ErrExcessData,
},
// Validate error excess data during write.
{
expiry: NoExpiry,
cacheSize: 2048,
err: ErrExcessData,
},
}
// Test 1 validating Open failure.
testCase := testCases[0]
cache := New(testCase.cacheSize, testCase.expiry)
_, err := cache.Open("test", fakeObjModTime)
if testCase.err != err {
t.Errorf("Test case 2 expected to pass, failed instead %s", err)
}
// Test 2 validating Create failure.
testCase = testCases[1]
cache = New(testCase.cacheSize, testCase.expiry)
_, err = cache.Create("test", 2)
if testCase.err != err {
t.Errorf("Test case 2 expected to pass, failed instead %s", err)
}
// Test 3 validating Create succeeds and returns a writer.
// Subsequently we Close() without writing any data, to receive
// `io.ErrShortBuffer`
testCase = testCases[2]
cache = New(testCase.cacheSize, testCase.expiry)
w, err := cache.Create("test", 1)
if testCase.err != err {
t.Errorf("Test case 3 expected to pass, failed instead %s", err)
}
if err = w.Close(); err != testCase.closeErr {
t.Errorf("Test case 3 expected to pass, failed instead %s", err)
}
// Test 4 validates Create and Close succeeds successfully caching
// the writes.
testCase = testCases[3]
cache = New(testCase.cacheSize, testCase.expiry)
w, err = cache.Create("test", 5)
if testCase.err != err {
t.Errorf("Test case 4 expected to pass, failed instead %s", err)
}
// Write '5' bytes.
w.Write([]byte("Hello"))
// Close to successfully save into cache.
if err = w.Close(); err != nil {
t.Errorf("Test case 4 expected to pass, failed instead %s", err)
}
r, err := cache.Open("test", fakeObjModTime)
if err != nil {
t.Errorf("Test case 4 expected to pass, failed instead %s", err)
}
// Reads everything stored for key "test".
cbytes, err := ioutil.ReadAll(r)
if err != nil {
t.Errorf("Test case 4 expected to pass, failed instead %s", err)
}
// Validate if read bytes match.
if !bytes.Equal(cbytes, []byte("Hello")) {
t.Errorf("Test case 4 expected to pass. wanted \"Hello\", got %s", string(cbytes))
}
// Test 5 validates Delete succeeds and Open fails with err
testCase = testCases[4]
cache = New(testCase.cacheSize, testCase.expiry)
w, err = cache.Create("test", 5)
if err != nil {
t.Errorf("Test case 5 expected to pass, failed instead %s", err)
}
// Write '5' bytes.
w.Write([]byte("Hello"))
// Close to successfully save into cache.
if err = w.Close(); err != nil {
t.Errorf("Test case 5 expected to pass, failed instead %s", err)
}
// Delete the cache entry.
cache.Delete("test")
_, err = cache.Open("test", fakeObjModTime)
if testCase.err != err {
t.Errorf("Test case 5 expected to pass, failed instead %s", err)
}
// Test 6 validates OnEviction being called upon Delete is being invoked.
testCase = testCases[5]
cache = New(testCase.cacheSize, testCase.expiry)
w, err = cache.Create("test", 5)
if err != nil {
t.Errorf("Test case 6 expected to pass, failed instead %s", err)
}
// Write '5' bytes.
w.Write([]byte("Hello"))
// Close to successfully save into cache.
if err = w.Close(); err != nil {
t.Errorf("Test case 6 expected to pass, failed instead %s", err)
}
var deleteKey string
cache.OnEviction = func(key string) {
deleteKey = key
}
// Delete the cache entry.
cache.Delete("test")
if deleteKey != "test" {
t.Errorf("Test case 6 expected to pass, wanted \"test\", got %s", deleteKey)
}
// Test 7 validates rejecting requests when excess data is being saved.
testCase = testCases[6]
cache = New(testCase.cacheSize, testCase.expiry)
w, err = cache.Create("test1", 5)
if err != nil {
t.Errorf("Test case 7 expected to pass, failed instead %s", err)
}
// Write '5' bytes.
w.Write([]byte("Hello"))
// Close to successfully save into cache.
if err = w.Close(); err != nil {
t.Errorf("Test case 7 expected to pass, failed instead %s", err)
}
_, err = cache.Create("test2", 1)
if err != ErrCacheFull {
t.Errorf("Test case 7 expected to pass, failed instead %s", err)
}
// Test 8 validates rejecting Writes which write excess data.
testCase = testCases[7]
cache = New(testCase.cacheSize, testCase.expiry)
w, err = cache.Create("test1", 5)
if err != nil {
t.Errorf("Test case 8 expected to pass, failed instead %s", err)
}
// Write '5' bytes.
n, err := w.Write([]byte("Hello"))
if err != nil {
t.Errorf("Test case 8 expected to pass, failed instead %s", err)
}
if n != 5 {
t.Errorf("Test case 8 expected 5 bytes written, instead found %d", n)
}
// Write '1' more byte, should return error.
n, err = w.Write([]byte("W"))
if n == 0 && err != testCase.err {
t.Errorf("Test case 8 expected to fail with ErrExcessData, but failed with %s instead", err)
}
}
// TestStateEntryPurge - tests if objCache purges stale entry and returns ErrKeyNotFoundInCache.
func TestStaleEntryPurge(t *testing.T) {
cache := New(1024, NoExpiry)
w, err := cache.Create("test", 5)
if err != nil {
t.Errorf("Test case expected to pass, failed instead %s", err)
}
// Write '5' bytes.
w.Write([]byte("Hello"))
// Close to successfully save into cache.
if err = w.Close(); err != nil {
t.Errorf("Test case expected to pass, failed instead %s", err)
}
_, err = cache.Open("test", time.Now().AddDate(0, 0, 1).UTC())
if err != ErrKeyNotFoundInCache {
t.Errorf("Test case expected to return ErrKeyNotFoundInCache, instead returned %s", err)
}
}